On-capillary derivatization and analysis of amino acids in human plasma by capillary electrophoresis with laser-induced fluorescence detection: application to diagnosis of aminoacidopathies

A capillary electrophoresis with laser-induced fluorescence detection method for the analysis of free amino acids (AA) in human plasma was developed. A mixture of 16 AA was on-capillary derivatized with 3-(2-furoyl)quinoline-2-carboxaldehyde (FQ) and separated inside the capillary in less than 30 min using 70 mM borax-3.5 mM SDS pH 9.3 as running buffer. Four plasma samples from a healthy donor and patients suffering from phenylketonuria, propionic acidemia, and tyrosinemia type II were studied. Repeatabilities calculated as intra-day RSD (n = 3) values for the AA involved in these aminoacidopathies (glycine, phenylalanine, and tyrosine) were in the range of 0.3 to 1.2% for migration time and 3.7 to 8.2% for peak height. Reproducibilities calculated as inter-day RSD (n = 4) values for the same AA were between 0.7 and 1.4% for migration time and 4.7 and 9.1% for peak height. A fast qualitative analysis allowed the identification of the corresponding disease by comparing the electrophoretic profiles from the patient and the healthy donor and noting the increased level of the specific AA accompanying each individual disease. The results of the quantitative analysis for glycine, phenylalanine, and tyrosine in the plasma samples studied using the developed method showed a good agreement with those provided by the Center of Diagnosis of Molecular Diseases using a standard method for AA analysis.     

Continuous on-line derivatization and determination of amino acids by a microfluidic capillary electrophoresis system with a continuous sample introduction interface

An automatic, rapid and continuous on-line derivatization system coupled to microfluidic capillary electrophoresis (CE) for the determination of amino acids using o-phthaldialdehyde/N-acetyl-l-cysteine (OPA/NAC) as the derivative agents has been developed. By on-line derivatization, amino acids were automatically and reproducibly converted to the UV-absorbing derivatives, which were separated by capillary zone electrophoresis (CZE). Optimization of derivatization and separation condition was carried out to achieve both good sensitivity and separation efficiency. The separation could be achieved within 4 min and sample throughput rate can reach up to 16 h⁻¹. The repeatability (defined as relative standard deviation, R.S.D.) was 2.56, 2.85, 3.24 and 3.60% with peak area evaluation and 2.93, 3.12, 4.20 and 4.91% with peak height evaluation for arginine (Arg), phenylalanine (Phe), serine (Ser) and glycine (Gly), respectively. The limits of detection (S/N=3) were 10.46, 13.14, 34.39 and 44.79 μmol/l for Arg, Phe, Ser and Gly, respectively. Major advantages of the proposed method include improved precision and efficient automation of the derivatization by the FI system and the enhanced sampling frequencies by the combined FI-CE system.     

Capillary-assembled microchip as an on-line deproteinization device for capillary electrophoresis

A capillary-assembled microchip (CAs-CHIP), prepared by simply embedding square capillaries in a lattice polydimethylsiloxane (PDMS) channel plate with the same channel dimensions as the outer dimensions of the square capillaries, has been used as a diffusion-based pretreatment attachment in capillary electrophoresis (CE). Because the CAs-CHIPs employ square-section channels, diffusion-based separation of small molecules from sample solutions containing proteins is possible by using the multilayer flow formed in the square section channel. When a solution containing high-molecular-weight and low-molecular-weight species makes contact with a buffer solution, the low-molecular-weight species, which have larger diffusion coefficients than the high-molecular-weight species, can be collected in a buffer-solution phase. The collected solution containing the low-molecular-weight species is introduced into the separation capillary to be analyzed by CE. This type of system can be used for CE analysis in which pretreatment is required to remove proteins. In this work a fluorescently labeled protein and rhodamine-based molecules were chosen as model species and a feasibility study was performed.      

Efficient capillary electrophoresis separation and determination of free amino acids in beer samples

Simultaneous detection of various o‐phthalaldehyde (OPA)‐labeled amino acids (AAs) in food samples was reported based on CE separation. Ionic liquid was used for the first time for CE analysis of AAs with in‐capillary derivatization. Several other additives, including SDS, α/β‐CD, and ACN, as well as key parameters for CE separation (buffer pH value, separation voltage), were also investigated. Our results show that the multiple additive strategy exhibits good stable and repeatable character for CE analysis of OPA‐labeled AAs, for either in‐capillary derivatization or CE separation, and allows simultaneous quantification of different OPA‐labeled AAs in a large concentration range of 50 μM to 3.0 mM with LOD down to 10 μM. Seventeen OPA‐labeled AAs, except for two pairs of AAs (His/Gln and Phe/Leu), which were separated with resolutions of 1.1 and 1.2, respectively, were baseline separated and identified within 23 min using the present multiple additive strategy. The method was successfully applied for simultaneous analysis of AAs in seven beer samples and as many as eleven trace‐amount AAs were detected and quantified, indicating the valuable potential application of the present method for food analysis.     

Capillary electrophoresis determination of biogenic amines by field-amplified sample stacking and in-capillary derivatization

A sensitive CE method for determining biogenic amines in wines based on in-capillary derivatization with 1,2-naphthoquinone-4-sulfonate is presented. In this method, reagent and buffer solutions are introduced hydrodynamically into the capillary whereas the sample is injected electrokinetically, thus, allowing a selective preconcentration of the analytes by field-amplified sample stacking. Amines are labeled inside the capillary using a zone-passing derivatization approach in mixed tandem mode. The most relevant variables influencing on the derivatization and separation as well as significant interactions have been evaluated using experimental design. Multi-criteria decision making is utilized for the simultaneous optimization of interacting variables through overall desirability response surfaces. The validation of the method has proven an excellent separation performance and accuracy for the determination of biogenic amines such as histamine, tryptamine, phenylethylamine, tyramine, agmatine, ethanolamine, serotonin, cadaverine, and putrescine in red wines. Detection limits range from 0.02 mg/L for ethanolamine to 0.91 mg/L for serotonin. The RSDs for migration time and peak area are around 1.2 and 6.2%, respectively. Red wines from different Spanish regions have been analyzed using the proposed method.     

Field-amplified sample injection and in-capillary derivatization for capillary electrophoretic analysis of metal ions in local wines

In-capillary derivatization and field-amplified sample injection (FASI) coupled to capillary zone electrophoresis (CZE) was evaluated for the analysis of metals (Co(II), Cu(II), Ni(II), and Fe(II)) using 2-(5-Nitro-2-Pyridylazo)-5-(N-Propyl-N-Sulfopropylamino)Phenol (Nitro-PAPS) as the derivatizing agent. For FASI, the optimum conditions were water as sample solvent, 1 s hydrodynamic injection (0.1 psi) of a water plug, 5 s of electrokinetic introduction (10 kV) of the sample. The in-capillary derivatization was successfully achieved with zone-passing strategy in order tandem injection of Nitro-PAPS reagent (0.5 psi, 7 s), a small water plug (0.1 psi, 1 s), and metal ion introduction (10 kV, 5 s). The solution of 45 mmol L^− 1 borate pH 9.7 and 1.0 × 10^− 5 mol L^− 1 Nitro-PAPS containing 20% acetonitrile was used as the running buffer. The limit of detection obtained by the proposed method was lower than those from pre-capillary derivatization about 3–28 times. The recovery of the method was comparable to pre-capillary derivatization method. In-capillary derivatization-FASI-CZE was applied to analysis of metals in wine samples. The results were compared with those obtained by CZE with pre-capillary derivatization method and atomic absorption spectrometry (AAS).     

Field-amplified sample injection and in-capillary derivatization for sensitivity improvement of the electrophoretic determination of histamine

The feasibility of the combination of field-amplified sample injection (FASI) and in-capillary derivatization was explored for improving sensitivity of histamine in capillary electrophoresis (CE). Naphthalene-2,3-dicarboxaldehyde (NDA) was used as derivatization reagent. The reagent and sample was introduced by tandem mode. The derivatization was accomplished by at-inlet mode with standing time of 1.5 min. The combination of FASI and in-capillary derivatization was successfully achieved with about 400-fold concentration sensitivity enhancement compared to pre-capillary derivatization at the same set-up. The detection limit of concentration for histamine reached 1.25 x 10(-11) M by CE and fluorescence detection with S/N = 3. Parameters affecting FASI and in-capillary derivatization process including sample matrix, buffer concentration and reagent injection amount, were investigated.     

Sequential injection sample introduction microfluidic-chip based capillary electrophoresis system

A sequential injection micro-sample introduction system was coupled to a microfluidic-chip based capillary electrophoresis system through a split–flow sampling interface integrated on the micro-chip. The microfluidic system measured 20×70×3 mm in dimension, and was produced using a non-lithographic approach with components readily available in the analytical laboratory. In the H-configuration channel design the horizontal separation channel was a 75 μm I.D.×60 mm quartz capillary, with two vertical side arms produced from plastic tubing. The conduits were embedded in silicon elastomer with a planar glass base. Sequential introduction of a series of samples with about 2.5% carryover was achieved at 48 h⁻¹ throughput with samples containing a mixture of fluorescein isothiocyanate (FITC)-labeled amino acids using SI sample volumes of 3.3 μl and carrier flow-rate of 2.0 ml min⁻¹. Baseline separation was achieved for FITC-labeled arginine, phenylalanine, glycine and FITC (laser induced fluorescence detection) in sodium tetraborate buffer (pH 9.2) within 8–80 s, at separation lengths of 25–35 mm and electrical field strengths of 250–1500 V cm⁻¹, with plate heights in the 0.7–3 μm range.     

Analysis of amino acids in individual human erythrocytes by capillary electrophoresis with electroporation for intracellular derivatization and laser-induced fluorescence detection

A method for monitoring amino acids in single erythrocytes is described. For intracellular derivatization, reagent fluorescein isothiocyanate (FITC) was introduced into living cells by electroporation. For an 8 microm erythrocyte, the analytes were diluted by a factor of only 1.6. After completion of the derivatization reaction, a single cell was injected into the separation capillary tip and lysed there. The derivatized amino acids were separated by capillary electrophoresis, followed by laser-induced fluorescence detection. Nine amino acids were quantitatively determined, with amounts of amino acids ranging from 3.8-32 amol/single cell.     

Temperature effects in capillary electrophoresis. 1: Internal capillary temperature and effect upon performance

Summary In isothermal CE the migration velocity of analytes and the number of theoretical plates delivered are expected to be proportional to the field strength. In reality ohmic heating of the capillary causes distortions: the migration velocity increases more rapidly while the plate count increases less rapidly, and may even fall at high values of the field. These distortions are worse the larger the bore of the capillary and the higher the concentration of buffer. A detailed investigation of these effects using capillaries cooled by natural convection has confirmed that self heating of the capillary is indeed largely responsible. The extent of self heating has been determined by three independent methods and to a first approximation is proportional to the power dissipation in the capillary. Decreasing viscosity with temperature is responsible for the nonlinearity of the dependence of velocity upon field strength while increase in the diffusion coefficient of analytes is responsible for the poorer than expected performance at high field strengths.     

Large-volume sample on-line concentration of angiotensins in non-aqueous capillary electrophoresis

A single step on-line concentration and separation method for peptides in non-aqueous capillary electrophoresis was developed. ACN containing 50 mM tetraethylammonium perchlorate was used as the electrophoretic medium; angiotensins I-IV were separated as a result of the differences in the magnitudes of their interactions with perchlorate anions. When the sample solution (ACN containing 0.5% trifluoroacetic acid and angiotensins) was injected as a large-volume plug, the analytes were concentrated at the inlet end of the capillary by both sweeping and stacking mechanisms; the separation procedure then started automatically without any operations such as polarity change. It was found that the concentration of analytes, injection period, and concentration of tetraethylammonium perchlorate in the electrophoretic medium were important factors for both separation and concentration efficiencies. The angiotensins were concentrated and separated with the large-volume injection of up to 80% of the effective capillary length.     

Inverse-flow derivatization for capillary electrophoresis of DNA fragments with laser-induced fluorescence detection

A novel method is presented to detect DNA fragments separated by capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection using inverse-flow derivatization. In electrophoresis, the intercalating dye, thiazol orange was only added to the separation buffer at the positive polarity. The negatively charged DNA fragments migrated from the negative polarity to the positive polarity, while the positively charged dye migrated in the opposite direction. When DNA fragments met with dye ions, the DNA–dye complexes were formed. The complexes continued migrating to the positive end, due to their net negative charges. When the complexes passed through the detection window, the fluorescent signals were generated. Importantly, DNA fragments migrated as their native state before DNA–dye complexes were formed. This procedure was used to detect double stranded DNA (dsDNA) and single stranded DNA (ssDNA) fragments, and polymerase chain reaction (PCR) products. The excellent resolution and good reproducibility of DNA fragments were achieved in non-gel sieving medium. This procedure may be useful in genetic mutation/polymorphism detections.     

Field-amplified on-line sample stacking for determination of carnosine-related peptides by capillary electrophoresis

An on-line sample stacking method, namely field-amplified sample injection, has been developed for the separation and determination of carnosine, anserine, and homocarnosine by capillary electrophoresis. Using electrokinetic injection, about 130- to 160-fold improvement of sensitivity was achieved without loss of separation efficiency when compared to conventional sample injection. For conventional injection, the samples were dissolved in running buffer and then hydrodynamically injected for 10 s (3.45 kPa). Various parameters affecting separation and sample stacking were optimized. Under optimum conditions, linear responses were obtained over two orders of magnitude and the detection limits (defined as S/N = 3) of carnosine, anserine, and homocarnosine were 1.5 x 10(-8) to 1.6 x 10(-8) mol/L.     

Speciation of organomercury compounds by capillary electrophoresis with pre-column derivatization and on-line stacking

A simple capillary electrophoresis method was developed to separate and quantify methylmercury, ethylmercury, and phenylmercury with the enhancement of pre-column derivatization and on-line stacking.     

Indirect thermo-optical detection for capillary electrophoresis

Indirect thermo-optical detection for capillary electrophoresis is described first. A 20 mW helium-neon laser (632.8 nm) was used to provide the pumping beam and a 2 mW helium-neon laser (632.8 nm) supplied as the probe beam; Methylene Blue dye was used as a background absorber. The addition of ethanol to the background electrolyte solution can be performed to reduce adsorption of Methylene Blue onto the capillary wall. The detection method was applied to the detection of amino acids separated by capillary electrophoresis. The detection limit for lysine was 5 × 10⁻⁶ mol l⁻¹ (signal-to-noise ratio, 2).     

Analytical potential of enzyme-coated capillary reactors in capillary zone electrophoresis

Enzymes immobilized on the inner surface of an electrophoretic capillary were used to increase sensitivity and resolution in capillary zone electrophoresis (CZE). Sensitivity is enhanced by inserting a piece of capillary containing the immobilized enzyme into the main capillary, located before the detector, in order to transform the analyte into a product with a higher absorptivity. This approach was used to determine ethanol. In order to improve resolution, capillary pieces containing immobilized enzymes were inserted at various strategic positions along the electrophoretic capillary. On reaching the enzyme, the analyte was converted into a product with a high electrophoretic mobility, the migration time for which was a function of the position of the enzyme reactor. This approach was applied to the separation and determination of acetaldehyde and pyruvate. Finally, the proposed method was validated with the determination of ethanol, acetaldehyde, and pyruvate in beer and wine samples.     

Temperature effects in capillary electrophoresis 2: Some theoretical calculations and predictions

Summary The dependence of the temperature excess, , in the capillary bore on the applied power, EI, is considered for both natural and forced convective cooling, using classical heat equations. The dependence of on EI is found to be linear for forced convection but not for natural convection. Use of forced convective cooling and capillaries of large outer diameter reduces . Direct comparison of the performance of different systems can be achieved by consideration of . Column performance is ultimately limited by thermal gradients across the capillary bore.     

Stacking, derivatization, and separation by capillary electrophoresis of amino acids from cerebrospinal fluids

This paper describes the in-column derivatization, stacking, and separation of amino acids by CE in conjunction with light-emitting diode-induced fluorescence using naphthalene-2,3-dicarboxaldehyde (NDA). According to the relative electrophoretic mobilities and the migration direction in tetraborate solution (pH 9.3), the injection order is cyanide, then amino acids, then NDA. Once poly(ethylene oxide) (PEO) migrates through the capillary under EOF, the amino acid.NDA derivatives, amino acids, and CN- ions migrating against the EOF enter the PEO zone. As a result of increases in viscosity and possible interactions with PEO molecules, the reagents/analytes slow down such that they become stacked at the boundary. In comparison with the off-column approach to the analysis of amino acids, our proposed method provides a lower degree of interference from polymeric NDA compounds and other side products. As a result, the plot of the peak height as a function of gamma-aminobutyric acid (GABA) concentration is linear over the range from 10(-5) to 10(-8) M, with the LOD being 4 nM. We demonstrate the diagnostic potential of this approach for the determination of amino acids, including GABA and glutamine, in biological samples through the analysis of large volumes of cerebral spinal fluids without the need for sample pretreatment.     

Elimination of the artefact peaks in capillary electrophoresis determination of glutamate by using organic solvents in sample preparation

Focusing on the demand from the food industry for fast and reliable alternative methods to control the quality of food products, we present in this paper a method for amino acid separation and glutamic acid quantification in complex matrices employing capillary electrophoresis with capacitively coupled contactless conductivity detection. We demonstrate by simulation and experimentally the use of organic solvents in sample preparation to prevent peak splitting and increase stacking in capillary electrophoretic separations of amino acids. Additionally, we obtained results for glutamic acid quantification comparable to those obtained via traditional methods used at industrial sites. We tested premium and low‐cost samples with large variations in their glutamic acid content, which demonstrated the wide range of applicability of the method presented herein. The results of the proposed capacitively coupled contactless conductivity detection based capillary electrophoresis method agreed with those obtained by an enzymatic detector and ultra high performance liquid chromatography coupled to tandem mass spectrometry, considering a confidence level of 95%.     

Fluorescent detection of peptides and amino acids for capillary electrophoresis via on-line derivatization with 4-fluoro-7-nitro-2,1,3-benzoxadiazole

An in-capillary derivatization of amino acids and peptides with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) was developed for their subsequent capillary electrophoretic analysis with laser-induced fluorescence detection (λ _ex=488 nm). The in-capillary derivatization was achieved in zone-passing mode by introducing successive plugs of sample and NBD-F into a fused silica capillary previously equilibrated with an alkaline borate buffer. To prevent NBD-F hydrolysis and to achieve a reliable derivatization, NBD-F was prepared daily in absolute ethanol and a plug of absolute ethanol was introduced between the sample and NBD-F reagent plugs. Various parameters influencing the derivatization efficiency were investigated and the optimum conditions were as follows: background electrolyte (BGE), 20 mM borate buffer (pH 8.8); introduction time, 4 s for sample and 2 s for NBD-F; molar ratio of NBD-F/sample, above 215; temperature, 45 °C for amino acids and 35 °C for peptides; applied voltage, +15 kV. The validation of the in-capillary derivatization method under optimal conditions showed a good linearity between the heights of the derivative peaks and the concentrations of the amino acids. The intra-day relative standard deviations of the migration times and the peak heights were less than 1.3% and 4.6%, respectively. The efficient derivatization and separation of a mixture of valine, alanine, glutamic acid and aspartic acid were achieved using this technique. Peptides such as buccaline and β-protein fragment 1–42 could also be derivatized using the developed in-capillary derivatization procedure. In‑capillary derivatization and separation of amino acids with different concentrations. From the top to bottom the concentrations are 1.11×10⁻⁵ M, 5.55×10⁻⁶ M, 2.78×10⁻⁶ M, 6.95×10⁻⁷ M. for valine; 1.26×10⁻⁵ M, 6.30×10⁻⁶ M, 3.15×10⁻⁶ M, 7.88×10⁻⁷ M for alanine; 3.78×10⁻⁵ M, 1.89×10⁻⁵ M, 9.45×10⁻⁶ M, 2.36×10⁻⁶ M for glutamic acid;, 4.27×10⁻⁵ M, 2.14×10⁻⁵ M, 1.07×10⁻⁵ M, 2.68×10⁻⁶ M for aspartic acid. Experiment conditions: injection order: 4s for sample, 1s for absolute ethanol, and then 2s for 5.24×10⁻² M NBD‑F; BGE: 20 mM borate pH 8.77; Applied voltage: 15 kV.