Continuous-Wave Operation of a Frequency-Tunable 460-GHz Second-Harmonic Gyrotron for Enhanced Nuclear Magnetic Resonance

The design, operation, and characterization of a continuous-wave (CW) tunable second-harmonic 460-GHz gyrotron are reported. The gyrotron is intended to be used as a submillimeter-wave source for 700-MHz nuclear magnetic resonance experiments with sensitivity enhanced by dynamic nuclear polarization. The gyrotron operates in the whispering-gallery mode TE(11,2) and has generated 16 W of output power with a 13-kV 100-mA electron beam. The start oscillation current measured over a range of magnetic field values is in good agreement with theoretical start currents obtained from linear theory for successive high-order axial modes TE(11,2,q). The minimum start current is 27 mA. Power and frequency tuning measurements as a function of the electron cyclotron frequency have also been carried out. A smooth frequency tuning range of 1 GHz was obtained for the operating second-harmonic mode either by magnetic field tuning or beam voltage tuning. Long-term CW operation was evaluated during an uninterrupted period of 48 h, where the gyrotron output power and frequency were kept stable to within ±0.7% and ±6 ppm, respectively, by a computerized control system. Proper operation of an internal quasi-optical mode converter implemented to transform the operating whispering-gallery mode to a Gaussian-like beam was also verified. Based on the images of the gyrotron output beam taken with a pyroelectric camera, the Gaussian-like mode content of the output beam was computed to be 92% with an ellipticity of 12%.     

Dynamic nuclear polarization at 9T using a novel 250 gyrotron microwave source

In the 1990’s we initiated development of high frequency gyrotron microwave sources with the goal of performing dynamic nuclear polarization at magnetic fields (∼5–23 T) used in contemporary NMR experiments. This article describes the motivation for these efforts and the developments that led to the operation of a gyrotron source for DNP operating at 250 GHz. We also mention results obtained with this instrument that would have been otherwise impossible absent the increased sensitivity. Finally, we describe recent efforts that have extended DNP to 460 GHz and 700 MHz ¹H frequencies.     

High Power, Frequency Tunable, Submillimeter Wave ESR Device Using a Gyrotron as a Radiation Source

ESR device using a submillimeter wave gyrotron as a radiation source and a pulse magnet for high field up to 30 T has been constructed. Our gyrotrons (Gyrotron FU series) were developed as millimeter and submillimeter wave radiation sources and have attractive advantages for ESR spectroscopy, for example, high power and frequency tunability over broad range. The ESR device has been successfully applied to three cases of ESR measurements. In the first case, the temperature dependence of ESR was measured for a typical antiferromagnetic material MnO at the frequency of 301 GHz. In the second case, the dependence of the fine structure constant of the ruby on the magnetic field intensity was measured in the millimeter to submillimeter wave region. In these two cases, the gyrotron was operated by complete cw mode. In the final case, a pulse technique was applied to the ESR, the gyrotron was operated in pulse mode and the pulsed magnetic field was generated in the synchronized phase with the gyrotron operation.     

Gyrotron Backward Wave Oscillator Experiments with a Relativistic Electron Beam Using an X-Band Rectangular Waveguide

A mildly relativistic electron beam (500keV, 200A, 10ns) injected into an X-band rectangular waveguide immersed in a uniform axial magnetic field (4-10kG) produced magnetically tunable microwave radiation in the 9-13 GHz frequency range with an estimated output power of 1MW. The frequency range and tunability of the radiated microwave agreed with a theoretical model for a gyrotron backward wave oscillator taking into account the low energy component of the beam electron.     

THE FIRST EXPERIMENT OF A THz GYROTRON WITH A PULSE MAGNET

A THz gyrotron with a pulse magnet has been designed, constructed and operated in FIR FU. It is developed as one of high frequency gyrotrons included in Gyrotron FU Series. The gyrotron has already achieved the first experimental result for high frequency operations whose radiation frequency exceeds 1 THz. In this paper, the design detail and the operation test results for sub-terahertz to terahertz range are described. The second harmonic operation is confirmed experimentally at the expected frequency of 1.005 THz due to TE_6,11 cavity mode at the magnetic field intensity of 19.0 T.     

连续调谐太赫兹回旋管非稳定振荡状态研究

太赫兹回旋管可实现高功率输出,并具有一定的频率调谐范围,是核磁共振波谱系统理想的高功率太赫兹辐射源。设计了263 GHz,TE_5,2基波连续调谐回旋管,通过磁场调节实现频率调谐范围为1.39 GHz,利用时域多模多频自洽非线性理论对设计的连续调谐回旋管非稳定振荡状态进行了研究。结果表明,在低次纵向谐波模式工作磁场范围内,当工作电流大于起振电流时,连续调谐回旋管先进入稳定状态,高次纵向谐波模式被抑制,工作模式TE_5,2的输出功率随时间不变;当电流增大,纵向谐波模式间的竞争引起回旋管由稳定状态进入到非稳定振荡状态,工作模式TE_5,2的输出功率随时间呈振荡变化且互作用效率大大降低;随着电流的进一步增大,回旋管又回到与低电流不同的稳定状态,互作用效率进一步降低。同时发现非稳定振荡状态的起始电流随着磁场增加而增大。本研究对需工作于稳定状态的面向DNP-NMR应用的连续调谐太赫兹回旋管的研制具有一定指导意义。     

Detailed Consideration of Experimental Results of Gyrotron FU CW II Developed as a Radiation Source for DNP-NMR Spectroscopy

A CW gyrotron for the sensitivity enhancement of NMR spectroscopy through dynamic nuclear polarization has been designed. The gyrotron operates at the second harmonic and frequency of 394.6 GHz with the main operating mode TE_0,6. Operating conditions of other neighboring cavity modes such as TE_2,6 at frequency of 392.6 GHz and TE_2,3 at frequency of 200.7 GHz were also considered. The experimental conditions of the gyrotron at low and high voltages are simulated. The output power of 56 watts corresponds to the efficiency of 2 percent at low voltage operation and frequency of 394.6 GHz is expected.     

Theory of gyro-backward wave oscillators with tapered magneticfield and waveguide cross section

A theory is developed which describes gyro-backward wave oscillators (gyro-BWO's) with arbitrarily relativistic electron beams and tapered external magnetic field and waveguide wall radius. For the case of linear tapering the optimal parameters are found that correspond to highly efficient operation. The frequency tunability as the function of magnetic field and voltage deviations has been analyzed. It is shown how to use the results given in terms of normalized parameters for designing concrete gyro-BWO's. For one concrete design the effect of electron velocity spread on the efficiency has been studied     

A 100 kW, 140 GHz pulsed gyrotron

The design and operation of a 100 kW, 140 GHz pulsed gyrotron are reported. To our knowledge, this is the highest frequency at which high gyrotron output power (>-100 kW) has been achieved. Results are presented for gyrotron operation in the range of magnetic field from 4 to 7 T, voltage from 23 to 80 kV and current up to 7.5 A. Near a value of magnetic field of 5.4 T, and output power of 100 kW was obtained at 140.4 GHz in single mode operation in the TE₀₃₁ resonator mode.     

A new approach for a multistage depressed collector for gyrotrons

A feasibility study for a two-stage depressed gyrotron collector has been performed. A new approach for an adiabatic magnetic decompression of the hollow electron beam has been used. It permits control of the radius of the constant magnetic flux surface, which determines the radial extension of the electron beam. Independent of the value of the magnetic field around the beam. For this purpose, either solenoidal coils or a ferromagnetic insert can be placed inside the hollow electron beam. Thus, the radial dimensions of a multistage depressed collector of a high-power high-frequency gyrotron can be kept within limits given by technological constraints. The energy sorting of the electron beam is improved by using electrodes inside the hollow electron beam for controlling the potential distribution. The additional control electrodes make it possible to eliminate almost all of the effect of secondary electrons on the operation of the collector. In order to demonstrate the proposed approach, a compact two-stage depressed collector has been designed for a 1.5-MW coaxial cavity gyrotron operating at 165 GHz in the transverse electric (TE)_31,17 mode, which is under development at FZK, Karlsruhe, Germany. Including the effect due to secondary electrons, a collector efficiency of 73% has been calculated with an average and peak heat dissipation density of about 240 W/cm² and 500 W/cm², respectively. This results in an increase of the output gyrotron efficiency from 36.5% to 62.6% when internal radio frequency (RF)-losses inside the gyrotron tube of 15% are taken into account     

High-power oscillator of continuous electromagnetic radiation with a frequency of 300 GHz

We consider a general concept of construction, the possible versions, and specific features of a gyrotron, whose output power in CW oscillation regime can reach a few kilowatts at a frequency of 300 GHz. The gyrotron is designed for work in a high-frequency facility in combination with a “dry” cryomagnet, which ensures a magnetic field of up to 12 T, required for the gyrotron operation. The basic results of numerical simulation and optimization of the electron gun, the resonant cavity, and other subsystems of the gyrotron are presented. The designs used for the gyrotron development are justified. Preliminary experiments showed the efficiency of the pilotproduction gyrotron with an output power of about 2 kW, which is record-breaking in this frequency range. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 50, No. 6, pp. 461–470, June 2007.     

206 GHz光子带隙谐振腔回旋管

分析了光子晶体谐振腔的模式选择功能,实现光子晶体谐振腔回旋管振荡器高阶电磁模与高次电子回旋模的有效耦合,并成功抑制了模式竞争。通过对光子晶体谐振腔禁带特性的分析,定出了工作模式为TE23模,还建立了光子晶体谐振腔回旋管的等效半径的概念,设计了自洽非线性理论和相关的计算机数值模拟程序。研究发现TE23模能有效地与电子的二次回旋谐波相互作用,其耦合频率为206 GHz,并极大地降低了对工作磁场的要求。在考虑诸多物理因素影响的情况下,对该二次谐波光子带隙谐振腔(PBGC)回旋管振荡器进行了参数优化,得到了电压40 kV、电流4.2 A、磁场3.925 T、输出功率35 kW、互作用效率21%的二次谐波TE23模PBGC回旋管振荡器。     

基于Eclipse图形建模框架的图形化脉冲序列设计软件的实现

采用Eclipse图形建模框架（Graphical Modeling Framework,GMF）技术构建了一个图形化磁共振脉冲序列设计软件．软件具备所见即所得的特点,用户使用拖放方式所画出的脉冲序列与教科书和参考文献上的脉冲序列几乎一样．软件支持核磁共振（Nuclear Magnetic Resonance,NMR）波谱和磁共振成像（Magnetic Resonance Imaging,MRI）的脉冲序列设计,同时提供实验参数管理模块,实现脉冲序列基础上的NMR实验设计和执行预览．得益于GMF完善的模型-视图-控制器模式和强大的代码生成能力,软件开发周期大幅度缩短、扩展能力大幅度提高．     

Design of a Large Orbit Gyrotron with a Permanent Magnet System

The paper presents results of numerical analysis and outlines the computer-aided design of a novel high-harmonic gyrotron with a beam of electrons gyrating along axis-encircling trajectories. The electron beam is formed by a novel electron-optical system (EOS) based on an electron gun of diode type with thermionic cathode and gradual reversal of the magnetic field. The results of numerical simulations predict satisfactory performance of the EOS and appropriate beam quality parameters. The tube design allows one to install different cavities optimized for excitation of TE_4,1 mode at the fourth harmonic of the cyclotron frequency or TE_3,1 mode at the third one. The target parameters of the device are: frequency about 112 GHz; output power near 1 kW and efficiency of several percent.     

Continuous-Wave Operation of a 460-GHz Second Harmonic Gyrotron Oscillator

We report the regulated continuous-wave (CW) operation of a second harmonic gyrotron oscillator at output power levels of over 8 W (12.4 kV and 135 mA beam voltage and current) in the TE(0,6,1) mode near 460 GHz. The gyrotron also operates in the second harmonic TE(2,6,1) mode at 456 GHz and in the TE(2,3,1) fundamental mode at 233 GHz. CW operation was demonstrated for a one-hour period in the TE(0,6,1) mode with better than 1% power stability, where the power was regulated using feedback control. Nonlinear simulations of the gyrotron operation agree with the experimentally measured output power and radio-frequency (RF) efficiency when cavity ohmic losses are included in the analysis. The output radiation pattern was measured using a pyroelectric camera and is highly Gaussian, with an ellipticity of 4%. The 460-GHz gyrotron will serve as a millimeter-wave source for sensitivity-enhanced nuclear magnetic resonance (dynamic nuclear polarization) experiments at a magnetic field of 16.4 T.     

Design of a 24 GHz, 25-50 kW Technology Gyrotron Operating at the Second Harmonic

The preliminary design of a moderate (25-50 kW) gyrotron operating at the ISM (industrial, scientific, medical) frequency of 24.1 GHz is presented. Operation at the second harmonic is considered so that one can obtain radiation at the given frequency with only half the magnetic field required.     

Design of a 35 GHz gyrotron

The conceptual design of a 35 GHz gyrotron has been developed consistently with the complex formulation of the electric field longitudinal distribution in the resonant cavity. Some models of magnetron injection guns able to produce laminar beams have been investigated leading to the design of an electron gun capable of generating a current of 5 A with a perpendicular velocity dispersion of 0.5%. The device includes three magnetic systems producting flat axial magnetic induction profiles of 1.05 kG, 13.2 kG and 0.65 kG in the cathode, cavity and collector regions, respectively. The gyrotron has been designed for pulsed operation in the TE₀₂₁ mode. Under the soft self-excitation condition, the maximum attainable efficiency is 40% with an output power of 100 kW. An analysis of the collector thermal behaviour has been carried out as well as a study of the thermophysical properties of the alumina window to be used.     

Generation of 1.5-kW, 1-THz coherent radiation from a gyrotron with a pulsed magnetic field

To cover a so-called terahertz gap in available sources of coherent electromagnetic radiation, the gyrotron with a pulsed solenoid producing up to a 40 T magnetic field has been designed, manufactured, and tested. At a 38.5 T magnetic field, the gyrotron generated coherent radiation at 1.022 THz frequency in 50 musec pulses. The microwave power and energy per pulse were about 1.5 kW and 75 mJ, respectively. Details of the gyrotron design, manufacturing, operation and measurements of output radiation are given.     

Recent results of the 1-MW, 140-GHz, TE22,6-modegyrotron

The TE_22,6-mode gyrotron operated at Forschungszentrum Karlsruhe at a frequency of 140 GHz has been investigated with respect to the behavior of different emitter materials, step tunability and reflections of the output beam. Two different materials of an emitter ring, LaB₆ and a coated dispenser cathode, were used to test the features of the gyrotron. The output power was found to be independent from the cathode material, as long as a new emitter ring was used. Aging of the emitter led to a slightly decreased output power. The gyrotron also was operated with a Brewster window. The broad-band characteristics of this window made it possible to measure the neighboring frequencies in a frequency range extending from 114 to 166 GHz. Only a slight dependence of the output power has been found over the whole frequency range. The Brewster window also allows us to investigate the influence of reflections on the output power. A strong decrease of the output power was found even for very small reflections. Tilting the power calorimeter (the reflections were measured to be less than 1%) increased the output power by about 20% to 1.6 MW at an efficiency of 36.2%. With a collector depression voltage of 35 kV for energy recovery, efficiencies of 60% at the above-mentioned output power were obtained