毛细管离子电泳法同时测定腌菜中硝酸根和亚硝酸根

以溴离子(Br-)为内标,建立了毛细管离子电泳同时测定腌菜中的硝酸根和亚硝酸根的方法。讨论了缓冲液pH、样品和缓冲液中氯化钠浓度、分离电压对分离的影响。结果表明:以含1mol LNaCl的40mmol LH3PO4 NaOH缓冲-、-得到基线分离。NO3-和NO2液(pH3.5)为背景电解质,4min内Br-、NO3-检出限分别为0.1g L和0.3g L,峰面积相对标准偏差分别为4.6%和NO25 8%。     

Protein separation by capillary gel electrophoresis: A review

Capillary gel electrophoresis (CGE) has been used for protein separation for more than two decades. Due to the technology advancement, current CGE methods are becoming more and more robust and reliable for protein analysis, and some of the methods have been routinely used for the analysis of protein-based pharmaceuticals and quality controls. In light of this progress, we survey 147 papers related to CGE separations of proteins and present an overview of this technology. We first introduce briefly the early development of CGE. We then review the methodology, in which we specifically describe the matrices, coatings, and detection strategies used in CGE. CGE using microfabricated channels and incorporation of CGE with two-dimensional protein separations are also discussed in this section. We finally present a few representative applications of CGE for separating proteins in real-world samples.     

Separation of alkylbenzyl quaternary ammonium compounds by capillary zone electrophoresis with sample stacking injection

Summary A systematic investigation of operational buffer systems, sample preparation and instrument parameters for achieving the best possible performance for determinating an homologous series of N-benzyl-N-alkyl-N,N-dimethylammonium chloride compounds by capillary zone electrophoresis with direct UV detection. The most effective separation was achieved within 3.5 min with the addition of acetonitrile (40%) in a phosphate buffer (20 mM pH 5.2) using a 40 cm fused-silica capillary operating at 25 KV and 20°C. Degassing of all electrolyte solutions and samples was very important. The linearity and repeatability for each compounds were satisfactory. To improve detection limits, on-column sample preconcentration, sample stacking, was investigated achieving a tenfold enrichment factor and quantitation limits about 10⁻⁷M.     

Simultaneous separation of ergot alkaloids by capillary electrophoresis after cloud point extraction from cereal samples

A new and sensitive analytical methodology for ergot alkaloids (EA) determination from cereal samples based on cloud point extraction (CPE) prior to CE‐UV absorbance was developed. The methodology involves extraction under acid conditions and subsequent preconcentration by applying a simple, rapid and environmentally friendly low volume surfactant extraction procedure. After extraction, CE analysis was carried out by performing dilutions on preconcentrated surfactant rich phase, achieving a single peak or simultaneous alkaloids determination. A real preconcentration factor of 22 of total EA was obtained, demonstrating the efficiency of this methodology. The limits of detection were 2.6 and 2.2 μg/kg for ergotamine and ergonovine, respectively. Validation procedure revealed suitable linearity, accuracy and precision. The average extraction and clean‐up recoveries were compared with the theoretical values and were better than 92%. This method was successfully applied to the determination of EA in different varieties of commercial flour samples, two grain samples and one of the leading brands cereal‐based product for infant feeding. The high sensitivity achieved for EA determinations in real samples suggests CPE procedure as an interesting approach to improve CE‐UV visible detection limits. Moreover, the whole process could be considered as a contribution to green chemistry because nonorganic solvents were involved, demonstrating its great potential over conventional techniques.     

Characterization of single-stranded DNA separation by capillary gel electrophoresis

We have investigated the effect of polymer gel reconditioning, the shape of the capillary, the applied electric field, and the capillary length for single-stranded DNA. The polyethylene oxide gel had deformed under the high electric field causing the degradation of the separation power. By the reintroduction of the fresh polyethylene oxide gel for the next run, one-base resolution was recovered. It turned out that the tip of the capillary at the injection side needed to be clean and symmetric for much improved resolution. Changing DNA motion by the pulsed electric field resulted in the separation of DNA far more than 500 bases.     

Simultaneous determination of celecoxib, meloxicam, and rofecoxib using capillary electrophoresis with surfactant and application in drug formulations

A simple and selective CE using surfactant with UV detection is described for the simultaneous determination of selective cyclooxygenase-2 inhibitors, celecoxib, meloxicam, and rofecoxib. The simultaneous analysis of celecoxib, meloxicam, and rofecoxib was performed in Tris buffer (10 mM; pH 11) with 60 mM sodium octane-sulfonate and 20% ACN as an anionic surfactant and organic modifier, respectively. Under this condition, good separation with high efficiency and the required short analysis time is achieved. The linear ranges of the method for the determination of celecoxib, meloxicam, and rofecoxib were over 5-100 microg/mL; the detection limits at 200 nm (S/N = 3; injection 3.45 kPa, 5 s) were 2, 1, and 1 microg/mL, respectively. The small amount of sample required and the expeditiousness of the procedure allow content uniformity to be determined in individual pharmaceutical products.     

Carbon nanotubes as separation carrier in capillary electrophoresis

The utility and versatility of carboxylic single-walled carbon nanotubes (c-SWNT) in capillary electrophoresis (CE) is demonstrated, using as model solutes homologues and structural isomers. In the case of homologues of caffeine and theobromine, distinct changes in the electrophoretic parameters occur at a critical concentration of c-SWNT in the run buffer. It is suggested that the c-SWNT of a definite concentration could form a network in the run buffer as a pseudostationary phase on the basis of the unique tubule structure, providing a different separation from sodium dodecyl sulfate (SDS) micelles. In the case of structural isomers of catechol and hydroquinone, differing from the homologues, it is mainly attributable to the functional groups on the c-SWNT that have an effect on the electrophoretic behaviors by forming intermolecular hydrogen bonding with analytes. Furthermore, aggregated c-SWNT serve as anticonvective media and minimize solute diffusion contributing to zone broadening. The presence of charged c-SWNT suppressed the electrodiffusion and decreased the adsorption between capillary wall and solutes, which led to better peak shapes of isomers.     

Isotopic separation of lithium ions by capillary zone electrophoresis

Separation of ⁶Li and ⁷Li isotopes by CZE was demonstrated. The BGE contained 5 mM 4‐aminopyridine, 0.9 mM oxalic acid, 0.25 mM CTAB, and 0.25% w/v Tween 20 (рН = 9.2). The running conditions were +25 kV at 30°C with indirect photometric detection at 261 nm. Under optimal experimental conditions, the analysis time was less than 21 min. Separation of Li preparations with mole fraction of ⁶Li ranging from 3.44 up to 90.38% was demonstrated.     

毛细管区带电泳法拆分手性药物环扁桃酯

近年来,随着不同种类的手性添加剂[1]在毛细管电泳(CZE)中的使用,毛细管电泳越来越显示出其强有力的手性拆分性能。具有特殊笼状结构并含有多个手性中心的环糊精及其衍生物是毛细电泳手性分离研究中最常采用的手性添加添[2-4]。本文合成了环糊精衍生物单3 O 苯基胺甲酰基 β CD[2]并以之作为手性选择剂分离了β CD及手性药物环扁桃酯。1　实验部分932 3 HVPS高压电源(山东省化工研究院),DD 2000型可调波长紫外检测器(中国科学院大连化学物理研究所),XWT型记录仪(上海大华仪表厂),pHS 25型酸度计(上海雷磁仪器厂),石英毛细管45cm…     

毛细管电泳法同时测定血浆中的美西律、利多卡因和布比卡因的浓度

采用毛细管电泳法同时测定血浆中关西律、利多卡因和布比卡因的浓度。取0．5mL血浆，用乙醚提取后吹干，重组后进样于毛细管电泳仪进行分离测定。电泳条件：分离用缓冲液为75mmol／L NaH2PO4溶液（pH3．0），温度30℃，运行电压26kV，紫外检测，波长200nm，压力进样5S。本法在0．1～4．0μg／mL范围内线性关系和精密度良好，方法回收率在96％～105％之间，检出限均为0．02μg／mL，可满足临床监测需要。     

Prediction of the separation of phenols by capillary zone electrophoresis

The effect of pH and ionic strength on the migration of neutral acids in capillary zone electrophoresis (CZE) has been studied for several phenols. The mobilities of the phenols and the efficiency of the capillary have been related to the studied factors. The mobility can be related to the pH of the running buffer through the mobility of the phenolate ion, and the conditional acidity pK value of the phenol at the working ionic strength. This allows prediction of the migration of the phenol, solely from its pK_a^′ value (literature pK_a corrected for the ionic strength of the solution) and mobility of the anion, which can be easily calculated from the mobility at a basic pH value and the pK_a^′ value. Combination of the predicted mobility with the efficiency allows estimation of the resolution of the consecutive peaks obtained for a mixture of phenols. This method has been tested for two groups of phenols of environmental interest.     

Flavonoid separation by capillary electrophoresis. Effect of temperature and pH

Summary The use of capillary electrophoresis for the analysis of selected flavonols present in fruit juices and wines (kaempferol-3- rutinoside, rutin, avicularin, quercitrin, isoquercitrin, isorhamnetin, kaempferol and quercetin) was explored, and the effect of pH and temperature on the separation studied. The method had good reproducibility and analyses were carried out in less than 10 minutes.     

Simultaneous separation of 17 anions by capillary electrophoresis with the addition of an organic solvent

Seventeen inorganic and organic anions, that normally are insufficiently separated via ion chromatography, were completely separated by the addition of an organic solvent to a solution of BGE combined with an adjustment of the apparent pH via CE in combination with indirect UV absorbance detection. Methanol, ethanol, and acetonitrile were examined for their utility in manipulating the selective separation of anions. Methanol and acetonitrile were better modifiers than ethanol at enhancing the resolution of anions comigrating in an aqueous solution of BGE. Methanol was selected as the modifier that provided the largest separation window that could achieve a complete separation of the target analytes. Via the use of methanol, manipulation of the selectivity between inorganic anions and that between inorganic and organic anions was enhanced, but the separation between organic anions remained difficult when only methanol was used. By varying the apparent pH of the BGE in the presence of 10% v/v methanol, however, the separation selectivity between organic anions was substantially improved. Eventually, 7 inorganic and 10 organic anions were simultaneously separated using BGE at a pH of 6.3 in the presence of 10% v/v methanol.     

Enantioselective separation of rivastigmine by capillary electrophoresis with cyclodextrines

Different beta-cyclodextrines (beta-cyclodextrin, heptakis (2,3,6-tri-O-methyl)-beta-cyclodextrin, hydroxypropyl-beta-cyclodextrin, and sulfated beta-cyclodextrin) were investigated as additives for the enantioselective separation of the R-form from rivastigmine ((S)-N-ethyl-3-[(1-dimethylamino) ethyl]-N-methyl-phenyl carbamate), contained as impurity in this drug, which is used for the treatment of Alzheimer's disease. Electrophoresis was performed in an acidic background electrolyte (triethanolammonium phosphate, 75 mM, pH 2.5) with various concentrations of the additives. The electrophoretic mobilities measured are typical functions of the additive concentrations, with complex constants (obtained by fitting the appropriate binding curve on the data) ranging between about 180 and 770 M(-1). Best separation was obtained with 7.5 mM beta-cyclodextrin, with the R-enantiomer as impurity migrating before the main S-compound. Intra- and interday reproducibility (n = 6 and 18, respectively) of migration time and peak area was in the low percentage range, linearity of the calibration line for the quantitation of the impurity in the range between 2.3 and 50 microg/ml, expressed by the linear correlation coefficient, was 0.9998. The limits of detection and quantitation, respectively, were 0.7 and 2.3 microg/ml, corresponding to 0.05 and 0.15%, m/m of the R- relative to the S-compound. Analysis can be carried out at 18 degrees C in less than 19 min.     

Rapid separation of acetophenone and its monohydroxy isomers by capillary electrophoresis

This work describes the development of a capillary electrophoresis(CE)method for the simultaneous separation of acetophenone(AP),2-hydroxyacetophenone(2-HAP),3-hydroxyacetophenone(3-HAP)and 4-hydroxyacetophenone(4-HAP)in synthetic mixtures using 10 mmol/L of sodium tetraborate buffer(pH 9.5).The aim of this work is to demonstrate the effectiveness of CE to separate AP and its monohydroxy isomers and to defne how the separations are affected by buffers,buffer pH,sample matrices and separation voltage.This method was successfully used for the trace level separation and determination of 2-HAP,3-HAP and 4-HAP in synthetic mixture and 4-HAP in spiked plasma samples.     

Flavonoid separation by capillary electrophoresis. Effect of temperature and pH

Summary The use of capillary electrophoresis for the analysis of selected flavonols present in fruit juices and wines (kaempferol-3-rutinoside, rutin, avicularin, quercitrin, isoquercitrin, isorhamnetin, kaempferol and quercetin) was explored, and the effect of pH and temperature on the separation studied. The method had good reproducibility and analyses were carried out in less than 10 minutes.     

Studying the size/shape separation and optical properties of silver nanoparticles by capillary electrophoresis

This paper describes the feasibility of employing capillary electrophoresis (CE) to separate silver particles in nanometer regimes. We have found that the addition of an anionic surfactant, sodium dodecyl sulphate (SDS), to the running electrolyte prevents coalescence of the silver particles during the process, which improves the separation performance; the concentration of SDS required for optimal silver nanoparticle separation is ca. 20 mM. By monitoring the electropherograms using a diode-array detection (DAD) system, we have also investigated the separation of suspended silver nanorods with respect to their shapes. Our results demonstrate that the combination of CE and DAD is a powerful one for the separation and characterization of various silver nanoparticles.     

Size separation of silica nanospheres by means of capillary zone electrophoresis

The electrophoretic mobility of silica nanospheres was shown to be a function of separation conditions such as pH and phosphate concentration of a carrier electrolyte. The separation selectivity can be controlled by the separation conditions and optimised depending on the sample composition. The effects of pH and phosphate concentration of buffer solutions on the nanosphere electrophoretic mobility are explained using the Overbeek-Booth electrokinetic theory taking into account both electrophoretic retardation and the relaxation effect.     

Enantiomer separation by capillary electrophoresis using DEAE-dextran and aminoglycosidic antibiotics

Summary Diethylaminoethyl (DEAE) dextran hydrochloride and three kinds of aminoglycosidic antibiotics; fradiomycin sulfate, kanamycin sulfate and streptomycin sulfate, were employed as chiral selectors in capillary electrophoresis, enantiomer separation. These selectors are cationic or basic because of amino functionality and therefore used for enantiomer separation of acidic compounds. To avoid adsorption of the basic or cationic selectors on the capillary inner surface, a coated capillary was employed. Among those tested, enantiomers of binaphthyl compounds and synthetic intermediates of diltiazem analogues were separated. Methanol addition was effective for the improvement of peak shape and resolution.