Insights into the structure and reactivity of acylperoxo complexes in the Kochi-Jacobsen-Katsuki catalytic system. A density functional study

Structural properties of the acylperoxo complexes [(Salen)Mn(III)RCO(3)] (2) and [(Salen)Mn(IV)RCO(3)] (3), the critical intermediates in the Kochi-Jacobsen-Katsuki reaction utilizing organic peracids or O(2)/aldehydes as oxygen source, have been studied with the density functional theory. Four distinct isomers, cis(O,N), cis(N,O), cis(N,N), and trans, of these complexes have been located. The isomer 2-cis(O,N) in its quintet ground state, and nearly degenerate isomers 3-cis(O,N) and 3-cis(N,O) in their quartet ground states are found to be the lowest in energy among the other isomers. The O-O bond cleavage in the cis(O,N), cis(N,O), and trans isomers of 2 and 3 has been elucidated. In complex 3, the O-O bond is inert. On the contrary, in complex 2, the O-O bond cleaves via two distinct pathways. The first pathway occurs exclusively on the quintet potential energy surface (PES) and corresponds to heterolytic O-O bond scission coupled with insertion of an oxygen atom into an Mn-N(Salen) bond to form 2-N-oxo species; this pathway has the lowest barrier of 14.9 kcal/mol and is 15.6 kcal/mol exothermic. The second pathway is tentatively a spin crossover pathway. In particular, for 2-cis(O,N) and 2-cis(N,O) the second pathway proceeds through a crucial minimum on the seam of crossing (MSX) between the quintet and triplet PESs followed by heterolytic O-O cleavage on the triplet PES, and produces unusual triplet 2-cis(O,N)- and 2-cis(N,O)-oxo ([(Salen)Mn(V)(O)RCO(2)]) species; this pathway requires 12.8 kcal/mol and is 1.4 kcal/mol endothermic. In contrast, for the 2-trans isomer, spin crossing is less crucial and the O-O cleavage proceeds homolytically to generate 2-trans-oxo [(Salen)Mn(IV)(O)] species with RCO(2) radical; this pathway, however, cannot compete with that in 2-cis because it needs 21.9 kcal/mol for activation and is 15.3 kcal/mol endothermic. In summary, the O-O cleavage occurs predominantly in the 2-cis complexes, and may proceed either through pure high spin or spin crossover heterolytic pathway to produce 2-cis-oxo and 2-N-oxo species.     

Tunability of the M(II)M(III)/M(II)(2) and M(III)(2)/M(II)M(III) (M=Mn, Co) couples in bis-μ-O,O'-carboxylato-μ-OR bridged complexes

A comparison of the electrochemical properties of a series of dinuclear complexes [M(2)(L)(RCO(2))(2)](+) with M = Mn or Co, L = 2,6-bis(N,N-bis-(2-pyridylmethyl)-sulfonamido)-4-methylphenolato (bpsmp(-)) or 2,6-bis(N,N-bis(2-pyridylmethyl)aminomethyl)-4-tert-butylphenolato (bpbp(-)) and R = H, CH(3), CF(3) or 3,4-dimethoxybenzoate demonstrates: (i) The electron-withdrawing sulfonyl groups in the backbone of bpsmp(-) stabilize the [M(2)(bpsmp)(RCO(2))(2)](+) complexes in their M(II)(2) oxidation state compared to their [M(2)(bpbp)(RCO(2))(2)](+) analogues. Manganese complexes are stabilised by approximately 550 mV and cobalt complexes by 650 mV. (ii) The auxiliary bridging carboxylato ligands further attenuate the metal-based redox chemistry. Substitution of two acetato for two trifluoroacetato ligands shifts redox couples by 300-400 mV. Within the working potential window, reversible or quasi-reversible M(II)M(III)? M(II)(2) processes range from 0.31 to 1.41 V for the [Co(2)(L)(RCO(2))(2)](+/2+) complexes and from 0.54 to 1.41 V for the [Mn(2)(L)(RCO(2))(2)](+/2+) complexes versus Ag/AgCl for E(M(II)M(III)/M(II)(2)). The extreme limits are defined by the complexes [M(2)(bpbp)(CH(3)CO(2))(2)](+) and [M(2)(bpsmp)(CF(3)CO(2))(2)](+) for both metal ions. Thus, tuning the ligand field in these dinuclear complexes makes possible a range of around 0.9 V and 1.49 V for the one-electron E(M(II)M(III)/M(II)(2)) couple of the Mn and Co complexes, respectively. The second one-electron process, M(II)M(III)? M(III)(2) was also observed in some cases. The lowest potential recorded for the E°(M(III)(2)/M(II)M(III)) couple was 0.63 V for [Co(2)(bpbp)(CH(3)CO(2))(2)](2+) and the highest measurable potential was 2.23 V versus Ag/AgCl for [Co(2)(bpsmp)(CF(3)CO(2))(2)](2+).     

Synthesis, structure, and characterization of new mononuclear Mn(II) complexes. Electrochemical conversion into new oxo-bridged Mn(2)(III,IV) complexes. Role of chloride ions

Two Mn(II) complexes are isolated and X-ray characterized, namely, cis-[(L(2))Mn(II)(Cl)(2)] (1) and [(L(3))Mn(II)Cl(OH(2))](ClO(4)) (2(ClO(4))), where L(2) and L(3) are the well-known tetradentate N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)ethane-1,2-diamine and N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)propane-1,3-diamine ligands, respectively. The crystal structure reveals that whereas the ligand L(2) is in the cis-alpha conformation in complex 1, the ligand L(3) is in the more unusual cis-beta conformation in 2. EPR spectra are recorded on frozen solutions for both complexes and are characteristic of Mn(II) species. Electrochemical behaviors are investigated on acetonitrile solution for both complexes and show that cation 2 exists as closely related Mn(II) species in equilibrium. For both complexes exhaustive bulk electrolyses of acetonitrile solution are performed at oxidative potential in various experimental conditions. In the presence of 2,6-lutidine and after elimination of chloride ligands, the formation of the di-mu-oxo mixed-valent complexes [(L(2))Mn(III)(mu-O)(2)Mn(IV)(L(2))](3+) (3a) and [(L(3))Mn(III)(mu-O)(2)Mn(IV)(L(3))](3+) (4) is confirmed by UV-vis and EPR spectroscopies and cyclic voltammetry. In addition crystals of 4(ClO(4))(3) were isolated, and the X-ray structure reveals the cis-alphaconformation of L(3). In the absence of 2,6-lutidine and without elimination of the exogenous chloride ions, the electrochemical oxidation of 1 leads to the formation of the mononuclear Mn(III) complex, namely, [(L(2))Mn(III)(Cl)(2)](+) (5), as confirmed by UV-vis as well as parallel mode EPR spectroscopy and cyclic voltammetry. In the same conditions, the electrochemical oxidation of complex 2 is more intricate, and a thorough analysis of EPR spectra establishes the formation of the binuclear mono-mu-oxo mixed-valent [(L(3))ClMn(III)(mu-O)Mn(IV)Cl(L(3))](3+) (6) complexes. Electrochemical conversion of Mn(II) complexes into mixed-valent Mn(2)(III,IV) oxo-bridged complexes in the presence of 2,6-lutidine is discussed. The role of the chloride ligands as well as that of L(3) in the building of oxo bridges is discussed. Differences in behavior between L(2) and L(3) are commented on.     

A "push-pull" mechanism for heterolytic o-o bond cleavage in hydroperoxo manganese porphyrins

A water-soluble manganese porphyrin, 5,10,15,20-tetrakis-(1,3-dimethylimidazolium-2-yl)porphyrinatomanganese(III) (Mn(III)TDMImP) is shown to react with H(2)O(2) to generate a relatively stable dioxomanganese(V) porphyrin complex (a compound I analog). Stopped-flow kinetic studies revealed Michaelis Menton-type saturation kinetics for H(2)O(2). The visible spectrum of a compound 0 type intermediate, assigned as Mn(III)(OH)(OOH)TDMImP, can be directly observed under saturating H(2)O(2) conditions (Soret band at 428 nm and Q bands at 545 and 578 nm). The rate-determining O-O heterolysis step was found to have a very small activation enthalpy (ΔH(≠) = 4.2 ± 0.2 kcal mol(-1)) and a large, negative activation entropy (ΔS(≠) = -36 ± 1 cal mol(-1) K(-1)). The O-O bond cleavage reaction was pH independent at 8.8 < pH < 10.4 with a first-order rate constant of 66 ± 12 s(-1). These observations indicate that the O-O bond in Mn(III)(OH)(OOH)TDMImP is cleaved via a concerted "push-pull" mechanism. In the transition state, the axial (proximal) (-)OH is partially deprotonated ("push"), while the terminal oxygen in (-)OOH is partially protonated ("pull") as a water molecule is released to the medium. This mechanism is reminiscent of O-O bond cleavage in heme enzymes, such as peroxidases and cytochrome P450, and similar to the fast, reversible O-Br bond breaking and forming reaction mediated by similar manganese porphyrins. The small enthalpy of activation suggests that this O-O bond cleavage could also be made reversible.     

Oxyl radical required for o-o bond formation in synthetic Mn-catalyst

DFT calculations using the B3LYP functional support the suggestion that the [(terpy)(H(2)O)Mn(IV)(micro-O)(2)Mn(III)(H(2)O)(terpy)](3+) (terpy=2,2':6,2' '-terpyridine) complex functions as a synthetic O(2) catalyst. The calculated barrier for O-O bond formation with water is 23 kcal/mol. In this complex, as well as in models of the oxygen evolving complex in PSII, the active species is a Mn(IV)-oxyl radical. From comparisons with inactive Mn(V)-oxo complexes, it is proposed that radical formation is actually a requirement for O(2) formation activity in Mn-complexes.     

Axial ligand and spin-state influence on the formation and reactivity of hydroperoxo-iron(III) porphyrin complexes

The present study focuses on the formation and reactivity of hydroperoxo-iron(III) porphyrin complexes formed in the [Fe(III)(tpfpp)X]/H(2)O(2)/HOO(-) system (TPFPP=5,10,15,20-tetrakis(pentafluorophenyl)-21H,23H-porphyrin; X=Cl(-) or CF(3) SO(3)(-)) in acetonitrile under basic conditions at -15 °C. Depending on the selected reaction conditions and the active form of the catalyst, the formation of high-spin [Fe(III)(tpfpp)(OOH)] and low-spin [Fe(III)(tpfpp)(OH)(OOH)] could be observed with the application of a low-temperature rapid-scan UV/Vis spectroscopic technique. Axial ligation and the spin state of the iron(III) center control the mode of O-O bond cleavage in the corresponding hydroperoxo porphyrin species. A mechanistic changeover from homo- to heterolytic O-O bond cleavage is observed for high- [Fe(III)(tpfpp)(OOH)] and low-spin [Fe(III)(tpfpp)(OH)(OOH)] complexes, respectively. In contrast to other iron(III) hydroperoxo complexes with electron-rich porphyrin ligands, electron-deficient [Fe(III)(tpfpp)(OH)(OOH)] was stable under relatively mild conditions and could therefore be investigated directly in the oxygenation reactions of selected organic substrates. The very low reactivity of [Fe(III)(tpfpp)(OH)(OOH)] towards organic substrates implied that the ferric hydroperoxo intermediate must be a very sluggish oxidant compared with the iron(IV)-oxo porphyrin π-cation radical intermediate in the catalytic oxygenation reactions of cytochrome P450.     

Spectroscopic properties and electronic structure of low-spin Fe(III)-alkylperoxo complexes: homolytic cleavage of the O-O bond

The spectroscopic properties, electronic structure, and reactivity of the low-spin Fe(III)-alkylperoxo model complex [Fe(TPA)(OH(x))(OO(t)Bu)](x+) (1; TPA = tris(2-pyridylmethyl)amine, (t)Bu = tert-butyl, x = 1 or 2) are explored. The vibrational spectra of 1 show three peaks that are assigned to the O-O stretch (796 cm(-1)), the Fe-O stretch (696 cm(-)(1)), and a combined O-C-C/C-C-C bending mode (490 cm(-1)) that is mixed with upsilon(FeO). The corresponding force constants have been determined to be 2.92 mdyn/A for the O-O bond which is small and 3.53 mdyn/A for the Fe-O bond which is large. Complex 1 is characterized by a broad absorption band around 600 nm that is assigned to a charge-transfer (CT) transition from the alkylperoxo pi*(upsilon) to a t(2g) d orbital of Fe(III). This metal-ligand pi bond is probed by MCD and resonance Raman spectroscopies which show that the CT state is mixed with a ligand field state (t(2g) --> e(g)) by configuration interaction. This gives rise to two intense transitions under the broad 600 nm envelope with CT character which are manifested by a pseudo-A term in the MCD spectrum and by the shapes of the resonance Raman profiles of the 796, 696, and 490 cm(-1) vibrations. Additional contributions to the Fe-O bond arise from sigma interactions between mainly O-O bonding donor orbitals of the alkylperoxo ligand and an e(g) d orbital of Fe(III), which explains the observed O-O and Fe-O force constants. The observed homolytic cleavage of the O-O bond of 1 is explored with experimentally calibrated density functional (DFT) calculations. The O-O bond homolysis is found to be endothermic by only 15 to 20 kcal/mol due to the fact that the Fe(IV)=O species formed is highly stabilized (for spin states S = 1 and 2) by two strong pi and a strong sigma bond between Fe(IV) and the oxo ligand. This low endothermicity is compensated by the entropy gain upon splitting the O-O bond. In comparison, Cu(II)-alkylperoxo complexes studied before [Chen, P.; Fujisawa, K.; Solomon, E. I. J. Am. Chem. Soc. 2000, 122, 10177] are much less suited for O-O bond homolysis, because the resulting Cu(III)=O species is less stable. This difference in metal-oxo intermediate stability enables the O-O homolysis in the case of iron but directs the copper complex toward alternative reaction channels.     

Dioxo-bridged dinuclear manganese(III) and -(IV) complexes of pyridyl donor tripod ligands: combined effects of steric substitution and chelate ring size variations on structural,spectroscopic, and electrochemical properties

The syntheses and structural, spectral, and electrochemical characterization of the dioxo-bridged dinuclear Mn(III) complexes [LMn(mo-O)(2)MnL](ClO(4))(2), of the tripodal ligands tris(6-methyl-2-pyridylmethyl)amine (L(1)) and bis(6-methyl-2-pyridylmethyl)(2-(2-pyridyl)ethyl)amine (L(2)), and the Mn(II) complex of bis(2-(2-pyridyl)ethyl)(6-methyl-2-pyridylmethyl)amine (L(3)) are described. Addition of aqueous H(2)O(2) to methanol solutions of the Mn(II) complexes of L(1) and L(2) produced green solutions in a fast reaction from which subsequently precipitated brown solids of the dioxo-bridged dinuclear complexes 1 and 2, respectively, which have the general formula [LMn(III)(mu-O)(2)Mn(III)L](ClO(4))(2). Addition of 30% aqueous H(2)O(2) to the methanol solution of the Mn(II) complex of L(3) ([Mn(II)L(3)(CH(3)CN)(H(2)O)](ClO(4))(2) (3)) showed a very sluggish change gradually precipitating an insoluble black gummy solid, but no dioxo-bridged manganese complex is produced. By contrast, the Mn(II) complex of the ligand bis(2-(2-pyridyl)ethyl)(2-pyridylmethyl)amine (L(3a)) has been reported to react with aqueous H(2)O(2) to form the dioxo-bridged Mn(III)Mn(IV) complex. In cyclic voltammetric experiments in acetonitrile solution, complex 1 shows two reversible peaks at E(1/2) = 0.87 and 1.70 V (vs Ag/AgCl) assigned to the Mn(III)(2) <--> Mn(III)Mn(IV) and the Mn(III)Mn(IV) <--> Mn(IV)(2) processes, respectively. Complex 2 also shows two reversible peaks, one at E(1/2) = 0.78 V and a second peak at E(1/2) = 1.58 V (vs Ag/AgCl) assigned to the Mn(III)(2) <--> Mn(III)Mn(IV) and Mn(III)Mn(IV) <--> Mn(IV)(2) redox processes, respectively. These potentials are the highest so far observed for the dioxo-bridged dinuclear manganese complexes of the type of tripodal ligands used here. The bulk electrolytic oxidation of complexes 1 and 2, at a controlled anodic potential of 1.98 V (vs Ag/AgCl), produced the green Mn(IV)(2) complexes that have been spectrally characterized. The Mn(II) complex of L(3) shows a quasi reversible peak at an anodic potential of E(p,a) of 1.96 V (vs Ag/AgCl) assigned to the oxidation Mn(II) to Mn(III) complex. It is about 0.17 V higher than the E(p,a) of the Mn(II) complex of L(3a). The higher oxidation potential is attributable to the steric effect of the methyl substituent at the 6-position of the pyridyl donor of L(3).     

A density functional study of O-O bond cleavage for a biomimetic non-heme iron complex demonstrating an Fe(v)-intermediate

Density functional theory using the B3LYP hybrid functional has been employed to investigate the reactivity of Fe(TPA) complexes (TPA = tris(2-pyridylmethyl)amine), which are known to catalyze stereospecific hydrocarbon oxidation when H(2)O(2) is used as oxidant. The reaction pathway leading to O-O bond heterolysis in the active catalytic species Fe(III)(TPA)-OOH has been explored, and it is shown that a high-valent iron-oxo intermediate is formed, where an Fe(V) oxidation state is attained, in agreement with previous suggestions based on experiments. In contrast to the analogous intermediate [(Por.)Fe(IV)=O](+1) in P450, the TPA ligand is not oxidized, and the electrons are extracted almost exclusively from the mononuclear iron center. The corresponding homolytic O-O bond cleavage, yielding the two oxidants Fe(IV)=O and the OH. radical, has also been considered, and it is shown that this pathway is inaccessible in the hydrocarbon oxidation reaction with Fe(TPA) and hydrogen peroxide. Investigations have also been performed for the O-O cleavage in the Fe(III)(TPA)-alkylperoxide species. In this case, the barrier for O-O homolysis is found to be slightly lower, leading to loss of stereospecificity and supporting the experimental conclusion that this is the preferred pathway for alkylperoxide oxidants. The difference between hydroperoxide and alkylperoxide as oxidant derives from the higher O-O bond strength for hydrogen peroxide (by 8.0 kcal/mol).     

Investigating the stability of the peroxide bridge in (mu-oxo)- and bis(mu-oxo)manganese clusters

The stability of the peroxide ligand bridging two manganese ions in the trinuclear oxomanganese complex [Mn(III)(3)(mu(3)-O)(mu-O(2))(AcO)(2)(dien)(3)](2+), one of only two structurally characterized Mn clusters possessing a mu(1,2)-peroxo bridge, has been investigated using density functional theory. Although the peroxide O-O bond in the related bis(mu-oxo)-bridged complex [Mn(IV)(2)(mu-O)(2)(mu-O(2))(NH(3))(6)](2+) undergoes spontaneous cleavage upon two-electron reduction to the Mn(III)(2) dimer, calculations on the model complexes [Mn(III)(2)(mu-O)(mu-O(2))(NH(3))(8)](2+) and [Mn(III)(2)(mu-O)(mu-O(2))(NH(3))(6)(H(2)O)(2)](2+), which contain the same mu-oxo-,mu-peroxo-bridged core present in the trimer, indicate that the peroxide bridge remains intact, in agreement with experiment. Its stability can be attributed to a Jahn-Teller distortion resulting in elongation of the axial Mn-N bonds perpendicular to the Mn(2)(mu-O)(mu-O(2)) plane which in turn stabilizes the high-spin Mn(III) oxidation state. However, the difference in the energies of the bridged and cleaved peroxide structures is small (ca. 0.5 eV), the lowest energy structure depending on the nature of the terminal ligands. Calculations on the model trimer complex [Mn(III)(3)(mu(3)-O)(mu-O(2))(HCO(2))(2)(NH(3))(9)](2+) indicate that the energetic differences between the cleaved and uncleaved structures is even smaller (ca. 0.2 eV), and although the peroxo-bridge remains more or less intact, it is likely to be quite facile.     

Biomimetic aryl hydroxylation derived from alkyl hydroperoxide at a nonheme iron center. Evidence for an Fe(IV)=O oxidant

Many nonheme iron-dependent enzymes activate dioxygen to catalyze hydroxylations of arene substrates. Key features of this chemistry have been developed from complexes of a family of tetradentate tripodal ligands obtained by modification of tris(2-pyridylmethyl)amine (TPA) with single alpha-arene substituents. These included the following: -C(6)H(5) (i.e., 6-PhTPA), L(1); -o-C(6)H(4)D, o-d(1)-L(1); -C(6)D(5), d(5)-L(1); -m-C(6)H(4)NO(2), L(2); -m-C(6)H(4)CF(3), L(3); -m-C(6)H(4)Cl, L(4); -m-C(6)H(4)CH(3), L(5); -m-C(6)H(4)OCH(3), L(6); -p-C(6)H(4)OCH(3), L(7). Additionally, the corresponding ligand with one alpha-phenyl and two alpha-methyl substituents (6,6-Me(2)-6-PhTPA, L(8)) was also synthesized. Complexes of the formulas [(L(1))Fe(II)(NCCH(3))(2)](ClO(4))(2), [(L(n)())Fe(II)(OTf)(2)] (n = 1-7, OTf = (-)O(3)SCF(3)), and [(L(8))Fe(II)(OTf)(2)](2) were obtained and characterized by (1)H NMR and UV-visible spectroscopies and by X-ray diffraction in the cases of [(L(1))Fe(II)(NCCH(3))(2)](ClO(4))(2), [(L(6))Fe(II)(OTf)(2)], and [(L(8))Fe(II)(OTf)(2)](2). The complexes react with tert-butyl hydroperoxide ((t)()BuOOH) in CH(3)CN solutions to give iron(III) complexes of ortho-hydroxylated ligands. The product complex derived from L(1) was identified as the solvated monomeric complex [(L(1)O(-))Fe(III)](2+) in equilibrium with its oxo-bridged dimer [(L(1)O(-))(2)Fe(III)(2)(mu(2)-O)](2+), which was characterized by X-ray crystallography as the BPh(4)(-) salt. The L(8) product was also an oxo-bridged dimer, [(L(8)O(-))(2)Fe(III)(2)(mu(2)-O)](2+). Transient intermediates were observed at low temperature by UV-visible spectroscopy, and these were characterized as iron(III) alkylperoxo complexes by resonance Raman and EPR spectroscopies for L(1) and L(8). [(L(1))Fe(II)(OTf)(2)] gave rise to a mixture of high-spin (S = 5/2) and low-spin (S = 1/2) Fe(III)-OOR isomers in acetonitrile, whereas both [(L(1))Fe(OTf)(2)] in CH(2)Cl(2) and [(L(8))Fe(OTf)(2)](2) in acetonitrile afforded only high-spin intermediates. The L(1) and L(8) intermediates both decomposed to form respective phenolate complexes, but their reaction times differed by 3 orders of magnitude. In the case of L(1), (18)O isotope labeling indicated that the phenolate oxygen is derived from the terminal peroxide oxygen via a species that can undergo partial exchange with exogenous water. The iron(III) alkylperoxo intermediate is proposed to undergo homolytic O-O bond cleavage to yield an oxoiron(IV) species as an unobserved reactive intermediate in the hydroxylation of the pendant alpha-aryl substituents. The putative homolytic chemistry was confirmed by using 2-methyl-1-phenyl-2-propyl hydroperoxide (MPPH) as a probe, and the products obtained in the presence and in the absence of air were consistent with formation of alkoxy radical (RO(*)). Moreover, when one ortho position was labeled with deuterium, no selectivity was observed between hydroxylation of the deuterated and normal isotopomeric ortho sites, but a significant 1,2-deuterium shift ("NIH shift") occurred. These results provide strong mechanistic evidence for a metal-centered electrophilic oxidant, presumably an oxoiron(IV) complex, in these arene hydroxylations and support participation of such a species in the mechanisms of the nonheme iron- and pterin-dependent aryl amino acid hydroxylases.     

Monoanionic {Mn(NO)}5 and dianionic {Mn(NO)}6 thiolatonitrosylmanganese complexes: [(NO)Mn(L)2]- and [(NO)Mn(L)2]2- (LH2 = 1,2-benzenedithiol and toluene-3,4-dithiol)

The reaction of MnBr(2) and [PPN](2)[S,S-C(6)H(3)-R] (1:2 molar ratio) in THF yielded [(THF)Mn(S,S-C(6)H(3)-R)(2)](-) [R = H (1a), Me (1b); THF = tetrahydrofuran]. Formation of the dimeric [Mn(S,S-C(6)H(3)-R)(2)](2)(2-) [R = H (2a), Me (2b)] was presumed to compensate for the electron-deficient Mn(III) core via two thiolate bridges upon dissolution of complexes 1a and 1b in CH(2)Cl(2). Complex 2a displays antiferromagnetic coupling interaction between two Mn(III) centers (J = -52 cm(-1)), with the effective magnetic moment (mu(eff)) increasing from 0.85 mu(B) at 2.0 K to 4.86 mu(B) at 300 K. The dianionic manganese(II) thiolate complexes [Mn(S,S-C(6)H(3)-R)(2)](2-) [R = H (3a), Me (3b)] were isolated upon the addition of [BH(4)](-) into complexes 1a and 1b or complexes 2a and 2b, respectively. The anionic mononuclear {Mn(NO)}(5) thiolatonitrosylmanganese complexes [(NO)Mn(S,S-C(6)H(3)-R)(2)](-) [R = H (4a), Me (4b)] were obtained from the reaction of NO(g) with the anionic complexes 1a and 1b, respectively, and the subsequent reduction of complexes 4a and 4b yielded the mononuclear {Mn(NO)}(6) [(NO)Mn(S,S-C(6)H(3)-R)(2)](2-) [R = H (5a), Me (5b)]. X-ray structural data, magnetic susceptibility measurement, and magnetic fitting results imply that the electronic structure of complex 4a is best described as a resonance hybrid of [(L)(L)Mn(III)(NO(*))](-) and [(L)(L(*))Mn(III)(NO(-))](-) (L = 1,2-benzenedithiolate) electronic arrangements in a square-pyramidal ligand field. The lower IR v(NO) stretching frequency of complex 5a, compared to that of complex 4a (shifting from 1729 cm(-1) in 4a to 1651 cm(-1) in 5a), supports that one-electron reduction occurs in the {(L)(L(*))Mn(III)} core upon reduction of complex 4a.     

Theoretical study of the mechanism of oxoiron(IV) formation from H2O2 and a nonheme iron(II) complex: O-O cleavage involving proton-coupled electron transfer

It has recently been shown that the nonheme oxoiron(IV) species supported by the 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane ligand (TMC) can be generated in near-quantitative yield by reacting [Fe(II)(TMC)(OTf)(2)] with a stoichiometric amount of H(2)O(2) in CH(3)CN in the presence of 2,6-lutidine (Li, F.; England, J.; Que, L., Jr. J. Am. Chem. Soc. 2010, 132, 2134-2135). This finding has major implications for O-O bond cleavage events in both Fenton chemistry and nonheme iron enzymes. To understand the mechanism of this process, especially the intimate details of the O-O bond cleavage step, a series of density functional theory (DFT) calculations and analyses have been carried out. Two distinct reaction paths (A and B) were identified. Path A consists of two principal steps: (1) coordination of H(2)O(2) to Fe(II) and (2) a combination of partial homolytic O-O bond cleavage and proton-coupled electron transfer (PCET). The latter combination renders the rate-limiting O-O cleavage effectively a heterolytic process. Path B proceeds via a simultaneous homolytic O-O bond cleavage of H(2)O(2) and Fe-O bond formation. This is followed by H abstraction from the resultant Fe(III)-OH species by an ?OH radical. Calculations suggest that path B is plausible in the absence of base. However, once 2,6-lutidine is added to the reacting system, the reaction barrier is lowered and more importantly the mechanistic path switches to path A, where 2,6-lutidine plays an essential role as an acid-base catalyst in a manner similar to how the distal histidine or glutamate residue assists in compound I formation in heme peroxidases. The reaction was found to proceed predominantly on the quintet spin state surface, and a transition to the triplet state, the experimentally known ground state for the TMC-oxoiron(IV) species, occurs in the last stage of the oxoiron(IV) formation process.     

Reductive nitrosylation and proton-assisted bridge splitting of a (mu-oxo)dimanganese(III) complex derived from a polypyridine ligand with one carboxamide group

Aerobic oxidation of the Mn(II) complex [Mn(Papy3)(H2O)](ClO4) (1, PaPy3- is the anion of the designed ligand N,N-bis(2-pyridylmethyl)amine-N-ethyl-2-pyridine-2-carboxamide) in acetonitrile affords the (mu-oxo)dimanganese(III) complex [(Mn(PaPy3))2(mu-O)](ClO4)2 (3) in high yield. The unsupported single oxo bridge between the two high-spin Mn(III) centers in 3 is readily cleaved upon addition of proton sources such as phenol, acetic acid, and benzoic acid, and complexes of the type [Mn(PaPy3)(L)](ClO4) (5, L = PhO-; 6, L = AcO-; 7, L = BzO-) are formed. The basicity of the bridge is evident by the fact that simple addition of methanol to a solution of 3 in acetonitrile affords the methoxide complex [Mn(PaPy3)(OMe)](ClO4) (4). The structures of 3-5 and 7 have been determined. Passage of NO through a solution of 3 in acetonitrile produces the [Mn-NO]6 nitrosyl [Mn(PaPy3)(NO)](ClO4) (2) via reductive nitrosylation. Complexes 4-7 also afford the [Mn-NO]6 nitrosyl 2 upon reaction with NO. In the latter case, the anionic O-based ligands (such as MeO- and PhO-) act as built-in bases and promote reductive nitrosylation of the Mn(III) complexes.     

Mechanism of hydrogen peroxide dismutation by a dimanganese catalase mimic: dominant role of an intramolecular base on substrate binding affinity and rate acceleration

Several modifications of the manganese coordination environment and oxidation states of a family of synthetic dimanganese complexes have been introduced in search of the structural features that promote high rates of hydrogen peroxide dismutation (catalase activity). The X-ray structure of reduced catalase (T thermophilus) reveals a dimanganese(II,II) site linked by three bridges: mu 13-glutamate-, mu-OH-, and mu-OH2. The roles of a bridging hydroxide vs mu-aqua and the carboxylate have been examined in the reduced Mn2(II,II) complexes, [(L1,2)Mn2(mu-O2CCH3)(mu-X)]2+ for X- = OH- (7A) or X = H2O (1-4), and their oxidized Mn2(III,III) analogues, [(L1,2)Mn2(mu-O)(O2CCH3)(OH)]+ (6) (L1 is N,N,N',N'-tetrakis(2-methylenebenzamidazolyl)-1,3-diaminopropan- 2-ol, and L2 is the tetrakis-N-ethylated analogue of L1, which has all amine protons replaced by ethyl groups). The steady-state catalase rate is first-order in concentration of both substrate and reduced catalyst and saturates at high peroxide concentrations in all cases, confirming peroxide/catalyst complex formation. No catalyst decomposition is seen after > 2000 turnovers. Catalysis proceeds via a ping-pong mechanism between the Mn2(II,II/III,III) redox states, involving complexes 6 and 7A/7A'. The Mn2(III,IV) oxidation state was not active in catalase activity. Replacement of the mu-aqua bridge by mu-hydroxide eliminates a kinetic lag phase in production of the O2 product, increases the affinity for substrate peroxide in the rate-limiting step as seen by a 5-fold. decrease in the Michaelis constant (KM), and accelerates the maximum rate (kcat) by 65-fold The kinetic and spectroscopic data are consistent with substrate deprotonation by the hydroxide bridge, yielding a hydroperoxyl bridge coordinated between the Mn ions (mu, eta 2 geometry, "end-on") as the basis for catalysis: mu-OH- + H2O2-->mu-O2H- + H2O. Binding of a second hydroxide ion to 7A causes a further increase in kcat by 4-fold with no further change in substrate affinity (KM). By contrast, free (noncoordinating) bases in solution have no effect on catalysis, thus establishing intramolecular sites for both functional hydroxide anions. Solution structural studies indicate that the presence of 2-5 equiv of hydroxide in solution leads to formation of a bishydroxide species, [(L1,2)Mn2(mu 13-O2CCH3)(OH)2], which in the presence of air or oxygen auto-oxidizes to yield complex 6, a Mn2(III,III)(mu-O) species. Complex 6 oxidizes H2O2 to O2 without a kinetic lag phase and is implicated as the active form of the oxidized catalyst. A maximum increase by 240-fold in catalytic efficiency (kcat/KM = 700 s-1 M-1) is observed with the bishydroxide species versus the aquo complex 1, or only 800-fold less efficient than the enzyme. Deprotonation of the amine groups of the chelate ligand L was shown not to be involved in the hydroxide effects because identical results were obtained using the catalyst with tetrakis(N-ethylated)-L. Uncoupling of the Mn(II) spins by protonation of the alkoxyl bridge (LH) was observed to lower the catalase activity. Comparisons to other dimanganese complexes reveals that the Mn2(II,II)/Mn2(III,III) redox potential is not the determining factor in the catalase rate of these complexes. Rather, rate acceleration correlates with the availability of an intramolecular hydroxide for substrate deprotonation and with binding of the substrate at the bridging site between Mn ions in the reductive O-O bond cleavage step that forms water and complex 6.     

Reactivity of Cr(III) μ-oxo compounds: catalyst regeneration and atom transfer processes

Oxidation of CpCr[(XylNCMe)(2)CH] (Xyl = 2,6-Me(2)C(6)H(3)) with pyridine N-oxide or air generated the μ-oxo dimer, {CpCr[(XylNCMe)(2)CH]}(2)(μ-O). The μ-oxo dimer was converted to paramagnetic Cr(III) CpCr[(XylNCMe)(2)CH](X) complexes (X = OH, O(2)CPh, Cl, OTs) via protonolysis reactions. The related Cr(III) alkoxide complexes (X = OCMe(3), OCMe(2)Ph) were prepared by salt metathesis and characterized by single crystal X-ray diffraction. The interconversion of the Cr(III) complexes and their reduction back to Cr(II) with Mn powder were monitored using UV-vis spectroscopy. The related CpCr[(DepNCMe)(2)CH] (Dep = 2,6-Et(2)C(6)H(3)) Cr(II) complex was studied for catalytic oxygen atom transfer reactions with PPh(3) using O(2) or air. Both Cr(II) complexes reacted with pyridine N-oxide and γ-terpinene to give the corresponding Cr(III) hydroxide complexes. When CpCr[(DepNCMe)(2)CH] was treated with pyridine N-oxide in benzene in the absence of hydrogen atom donors, a dimeric Cr(III) hydroxide product was isolated and structurally characterized, apparently resulting from intramolecular hydrogen atom abstraction of a secondary benzylic ligand C-H bond followed by intermolecular C-C bond formation. The use of very bulky hexaisopropylterphenyl ligand substituents did not preclude the formation of the analogous μ-oxo dimer, which was characterized by X-ray diffraction. Attempts to develop a chromium-catalyzed intermolecular hydrogen atom transfer process based on these reactions were unsuccessful. The protonolysis and reduction reactions of the μ-oxo dimer were used to improve the previously reported Cr-catalyzed radical cyclization of a bromoacetal.     

Charge distribution in chromium and vanadium catecholato complexes: X-ray absorption spectroscopic and computational studies

Transition-metal complexes with redox-active catecholato ligands are of interest as models of bioinorganic systems and as potential molecular materials. This work expands our recent X-ray absorption spectroscopic (XAS) studies of Cr(V/IV/III) triscatecholato complexes (Levina, A.; Foran, G. J.; Pattison, D. I.; Lay, P. A. Angew. Chem., Int. Ed. 2004, 43, 462-465) to a Cr(III) monocatecholato complex, [Cr(tren)(cat)]+ (tren = tris(2-aminoethyl)amine, cat = catecholato2-), and its oxidized analogue, as well as to a series of V(V/IV/III) triscatecholato complexes ([VL3]n-, where L = cat, 3,5-di-tert-butylcatecholato2-, or tetrachlorocatecholato2-, and n = 1-3). Various oxidation states of these complexes in solutions were generated by bulk electrolysis directly in the XAS cell. Increases in the edge energies and pre-edge absorbance intensities in XANES spectra, as well as decreases in the average M-O bond lengths (M = Cr or V) revealed by XAFS data analyses, are consistent with predominantly metal-based oxidations in both the Cr(V/IV/III) and V(V/IV/III) triscatecholato series, but the degree of electron delocalization between the metal ion and the ligands was higher in the case of Cr complexes. By contrast, oxidation of [Cr(III)(tren)(cat)]+ was mainly ligand-based and led to [Cr(III)(tren)(sq)]2+ (sq = semiquinonato-), as shown by the absence of significant changes in the pre-edge and edge features and by an increase in the average Cr-O bond length. The observed differences in electron-density distribution in various oxidation states of Cr and V mono- and triscatecholato complexes have been discussed on the basis of the results of density functional calculations. A crystal and molecular structure of (Et3NH)2[V(IV)(cat)3] has been determined at 25 K and the same complex with an acetonitrile of crystallization at 150 K.     

Metal-metal charge transfer and solvatochromism in cyanomanganese carbonyl complexes of ruthenium and osmium

The complexes [(H3N)5Ru(II)(mu-NC)Mn(I)Lx]2+, prepared from [Ru(OH2)(NH3)5]2+ and [Mn(CN)L(x)] {L(x) = trans-(CO)2{P(OPh)3}(dppm); cis-(CO)2(PR3)(dppm), R = OEt or OPh; (PR3)(NO)(eta-C5H4Me), R = Ph or OPh}, undergo two sequential one-electron oxidations, the first at the ruthenium centre to give [(H3N)5Ru(III)(mu-NC)Mn(I)Lx]3+; the osmium(III) analogues [(H3N)5Os(III)(mu-NC)Mn(I)Lx]3+ were prepared directly from [Os(NH3)5(O3SCF3)]2+ and [Mn(CN)Lx]. Cyclic voltammetry and electronic spectroscopy show that the strong solvatochromism of the trications depends on the hydrogen-bond accepting properties of the solvent. Extensive hydrogen bonding is also observed in the crystal structures of [(H3N)5Ru(III)(mu-NC)Mn(I)(PPh3)(NO)(eta-C5H4Me)][PF6]3.2Me2CO.1.5Et2O, [(H3N)5Ru(III)(mu-NC)Mn(I)(CO)(dppm)2-trans][PF6]3.5Me2CO and [(H3N)5Ru(III)(mu-NC)Mn(I)(CO)2{P(OEt)3}(dppm)-trans][PF6]3.4Me2CO, between the amine groups (the H-bond donors) at the Ru(III) site and the oxygen atoms of solvent molecules or the fluorine atoms of the [PF6]- counterions (the H-bond acceptors).     

Carboxylate and alkyl carbonate coordination at the hydrophobic binding site of redox-active dicobalt amine thiophenolate complexes

A series of new dicobalt complexes of the permethylated macrocyclic hexaamine dithiophenolate ligand H(2)L(Me) have been prepared and investigated in the context of ligand binding and oxidation state changes. The octadentate ligand is an effective dinucleating ligand that supports the formation of bioctahedral complexes with a central N(3)Co(mu-SR)(2)(mu-X)CoN(3) core structure, leaving a free bridging position X for the coordination of the substrates. The acetato- and cinnamato-bridged complexes [(L(Me))Co(II)(2)(mu-O(2)CMe)](+) (2) and [(L(Me))Co(II)(2)(mu-O(2)CCH=CHPh)](+) (5) were prepared by reaction of the mu-Cl complex [(L(Me))Co(II)(2)(mu-Cl)](+) (1) with the corresponding sodium carboxylates in methanol. The electrochemical properties of these and of the methyl carbonate complex [(L(Me))Co(II)(2)(mu-O(2)COMe)](+) (8) were also investigated. All complexes undergo two stepwise oxidations at ca. E(1)(1/2) = +0.22 and at E(2)(1/2) = ca. +0.60 V vs SCE, affording the mixed-valent complexes [(L(Me))Co(II)Co(III)(mu-O(2)CR)](2+) (3, 6, 9) and the fully oxidized Co(III)Co(III) forms [(L(Me))Co(III)(2)(mu-O(2)CR)](3+) (4, 7, 10), respectively. Compounds 3, 6, 9 and 4, 7, 10 refer to acetato-, cinnamato-, and methylcarbonato species, respectively. The Co(II)Co(III) compounds were prepared by comproportionation of the respective Co(II)(2) and Co(III)(2) compounds. The Co(III)Co(III) species were prepared by bromine oxidation of the Co(II)Co(II) forms. The crystal structures of complexes 2.BPh(4).MeCN, 3.(I(3))(2), 5.BPh(4).2MeCN, 6.(ClO(4))(2).EtOH, 7.(ClO(4))(3).MeCN.(H(2)O)(3), and 9.(ClO(4))(2).(MeOH)(2).H(2)O were determined by single-crystal X-ray crystallography at 210 K. The oxidations occur without gross structural changes of the parent complexes. The Co(II)Co(III) complexes are composed of high-spin Co(II) (d(7)) and low-spin Co(III) (d(6)) ions. The Co(III)Co(III) complexes are diamagnetic. The oxidation reactions affect the binding mode of the substrates. In the Co(II)(2) and Co(II)Co(III) forms the carboxylates bridge the two Co(2+) ions in a symmetric mu-1,3 fashion with uniform C-O bond distances, whereas asymmetric bridging modes, with one short C=O and one long C-O distance, are adopted in the fully oxidized species. This is consistent with the observed shifts in vibrational frequencies for nu(as)(C-O) and nu(s)(C-O) across the series.     

Kinetics and mechanism of O-O bond cleavage in the reaction of [RuIII(edta)(H2O)]- with hydroperoxides in aqueous solution

The reactions of [Ru(III)(edta)(H(2)O)](-) (1) (edta = ethylenediaminetetraacetate) with tert-butylhydroperoxide ((t)BuOOH) and potassium hydrogenpersulfate (KHSO(5)) were studied kinetically as a function of oxidant concentration and temperature (10-30 degrees C) at a fixed pH of 6.1 using stopped-flow techniques. Kinetic results were analyzed by using global kinetic analysis techniques. The reaction was found to consist of two steps involving the rapid formation of a [Ru(III)(edta)(OOR)](2-) intermediate, which subsequently undergoes heterolytic cleavage to form [(edta)Ru(V)=O](-). Since [(edta)Ru(V)=O](-) was produced almost quantitatively in the reaction of 1 with the hydroperoxides (t)BuOOH and KHSO(5), the common mechanism is one of heterolytic scission of the O-O bond. The water soluble and easy to oxidize substrate 2,2'-azobis(3-ethylbenzithiazoline-6-sulfonate (ABTS), was employed to substantiate the mechanistic proposal. Reactions were carried out under pseudo-first order conditions for [ABTS] > [hydroperoxide] > [1], and were monitored as a function of time for the formation of the one-electron oxidation product ABTS (*+). The detailed suggested mechanism is consistent with the reported rate and activation parameters, and discussed in reference to the results reported for the reaction of [Ru(II)(edta)(H(2)O)](-) with H(2)O(2).