A semiempirical study of 2,2′-dichlorodiethyl sulfide SN2 and neighboring group hydrolysis reaction mechanisms in the gas phase and in aqueous solution

A PM3 and SM3-PM3 semiempirical molecular orbital study of the 2,2′-dichlorodiethyl sulfide conventional S_N2 and neighboring group hydrolysis reaction mechanisms in the gas phase and in aqueous solution is described. The calculations predict substantially faster reactions in aqueous solution, with the neighboring group mechanism always being preferred. Detailed consideration is given to the geometries, relative energies, and partial atomic charges of all species involved in the reaction mechanisms considered and the extent to which aqueous solvation impacts these quantities. The results are consistent with expectation and with reported calculations concerning the intramolecular S_N2 reaction of 2-chloroethyl methyl sulfide. We also present the lowest energy mustard chlorohydrin structures according to PM3 and AM1 conformational analysis.     

DFT study on the reaction mechanisms of polyfluorosulfonate ester with F

Gas-phase reaction of C(1)F₃S(2)O₂O(3)C(4)H₂C(5)F₃ and F⁻(16) is investigated using DFT method. The geometries of various stationary points and their relative energies are obtained from 6-31+G*, 6-311G**, and 6-311++G** levels. In the S_N2(C) reaction leading to the cleavage of the C(4)–O(3) bond, the reaction complex results from attacking of F⁻ at a hydrogen atom H11 attached to carbon atom C(4). Afterward, F⁻ is attacking the atom C(4) from the backside of the atom O(3) with the help of the neighboring effect, and meanwhile a multi-membered ring, F(16)–H(11)–C(4)–C(5)–F(16), is being formed. The S_N2(C) reaction is irreversible. On the contrary, the S_N2(S) reaction leading to the cleavage of the S(2)–O(3) bond is reversible, and it is initiated by attacking of F⁻ at the atom S(2) from the backside of the atom O(3). The products of the reaction CF₃SO₃CH₂CF₃ +F⁻ should be, thermodynamically, controlled due to the reversibility of the S_N2(S) reaction, and those result, chemospecifically, from the cleavage of the C–O bond. At last, the SCRF calculations confirm that the solvent effect is preferable to the S_N2(C) reaction.     

Ab initio molecular orbital study on three feasible mechanisms for substitution of the vinylic carbon in F2C=C(OMs)BMe3−

A substitution on 2,2-difluorovinylic carbon was investigated by using ab initio molecular orbital calculations. Three feasible mechanisms, which are the S_N1-like, the S_N2-type and the addition-elimination mechanisms, were ex- amined for a model borate, 2,2-difluoro-1-mesyloxyvinyl(trimethyl)borate. Four TSs were obtained depending on the position of Li⁺ around the vinylborate although activation energies in the gas phase are rather high (ca. 30–40 kcal mol⁻¹) in comparison with that expected from the experimental conditions. It was confirmed at the SCRF-IPCM calculations that the solvent effect reduces the acti- vation energy of one S_N2-type mechanism very much (4. l kcal mol⁻¹ at the B3LYP/6-31+G^*//RHF/6-31+G^/s* level of theory) while those for the other mechanisms do not change very much. Therefore, the S_N2-type mechanism is applicable to the substitution reaction observed for the vinylborate.     

Pyrolysis and film growth studies of phosphinoborane compounds

Chemical vapor deposition experiments were conducted using phosphinoborane compounds of the type [R₂BPR′₂]_n, where R = CH₂CH₃ (1) or CH₃ (2), R′= C(CH₃)₃, and R = CH₂CH₃ (3) or CH₃ (4), R′ = Si(CH₃)₃. Thin films were deposited on Si substrates at 300–850°C under vacuum using 1–3, while no film formed using 4. All films contained considerable carbon (C/B = 0.67–7) and were deficient in phosphorus (P/B = 0-0.5) according to Auger electron spectroscopy. For 3, silicon was incorporated in the films (Si/B = 0.9–2). The preferential loss of phosphorus was nearly complete at higher pyrolysis temperatures that favor formation of carbon-rich films. Volatile products of the decompositions were observed by in situ mass spectroscopy and by ¹H nuclear magnetic resonance analysis of the condensate in a liquid nitrogen cooled trap. The products indicate that β-hydrogen elimination of alkene from boron is a preferred reaction pathway, while concerted elimination reactions appear to be inefficient. Although these phosphinoborane compounds do not appear to be suitable precursors for pure boron phosphide, the B-P-C films obtained are chemically inert and may be of interest as protective coatings.     

Dynamic behaviour and X-ray analysis of chiral η-allylpalladium complexes. II

The DANTE technique and NOESY two-dimensional method have been employed to observe the isomerization of the chiral cationic complex [Pd(η³-CH₂CMeCH₂(P-P′)]⁺ (1a), where P-P′ = the chiral chelating ligand (S)(N-diphenylphosphino)(2-diphenylphosphinoxymethyl)pyrrolidine. The rate constant was found to be 0.5 s⁻¹ in CHCl₃ at 295 K and 1.50 s⁻¹ in the presence of added free ligand. In the latter case the epimerization proceeds by a π-σ-π mechanism via the intermediacy of a primary η¹-allylpalladium complex. Although the intermediate was not detected, the NMR findings reveal that it has the allylic terminus η¹-bonded to palladium. The structure of 1a in its PF₆⁻ salt has been determined. The compound crystallizes in the orthorhombic space group P2₁2₁2₁ with a 10.029(4) b 19.203(8) c 36.115(6) Å, Z = 8, R = 0.0572 and R_w = 0.0712 for 3716 observed reflections with I > 3σ(I).     

Reactions of Ru(CCPh)(L2)Cp* (L2=dppm, dppe) with tetracyanoethene: cycloaddition, formation of monodentate dppm and dppmO complexes and migration of CN to ruthenium

Reactions of FcCCH (a), HCCCCFc (b) and FcCCCCFc (c) with Ru₃(CO)₁₀(NCMe)₂ (all) and Ru₃(μ-dppm)(CO)₁₀ (b and c only) are described. Among the products, the complexes Ru₃(μ₃-RC₂R′)(μ-CO)(CO)₉ (R=H, R′=Fc 1, CCFc 2; R=R′=Fc 5), Ru₃(μ-H)(μ₃-C₂CCFc)(μ-dppm)(CO)₇ 3, Ru₃(μ₃-FcC₂CCFc)(μ-dppm)(μ-CO)(CO)₇ 6 and Ru₃{μ₃-C₄Fc₂(CCFc)₂}(μ-dppm)(μ-CO)(CO)₅ 7 were characterised, including single-crystal structure determinations for 1, 3, 5 and 7; that of 7 did not differ significantly from an earlier study of a mixed CH₂Cl₂–C₆H₆ solvate.     

Polymer swelling. Part 17: Systematization of steric effects on adsorption parameters as exemplified by swelling of poly(styrene-co-divinylbenzene) to saturation using linear and non-linear acyclic aliphatic ether liquids

The adsorption parameters () for five branched aliphatic ethers were established experimentally in the usual way [17]. It was shown that when this set of -values is combined with the set already established for the unbranched ethers [17], the union set enables one to estimate with reasonable confidence the -values for all the possible structural permutations derivable from the general molecular structure [GMS] H(CH₂)_m+1[(CH₃)_q′CH_2−q′ OCH_2−q(CH₃)_q](CH₂)_n+1H, and for a portion of those that are derivable from the GMS (CH₃)_q′+1CH_2−q′[(CH₂)_mO(CH₂)_n]CH_2−q(CH₃)_q+1, using the corresponding Log vs N linear relationship deduced in these and earlier sorption studies, in which N = m+n+q+q′+4. It was shown that the data for the -values derived thereby comprise a self-consistent rigidly interconnected multidimensional universe of linear Log vs N relationships that represent series of subsets of the above GMSs resulting from varying one integer (m+n+q or ′) while the other three are held constant.     

Conversion of rhenium alkylidyne complexes that contain unsupported metal-metal double bonds into relatives that contain μ-alkylidyne ligands

Photolysis of compounds of the type [Re(CCMe₂R)(OR′)₂] (R = Me or Ph; OR′ = O′Bu, OCMe₂(CF₃), or OCMe(CF₃)₂) in benzene with a medium pressure mercury lamp yields compounds of the type [Re(OR′)₂]₂(μ-CCMe₂R)₂ in an intramolecular and irreversible manner. [Re(CCMe₂R)(OR′)₂]₂ and [Re(OR′)₂]₂(μ-CCMe₂R)₂ (OR′ = O′Bu or OCMe₂(CF₃)₂) both react with excess carbon monoxide in several solvents to afford the dimers [Re(OR′)₂(CO)]₂(μ-CCMe₂R)₂ quantitatively. An X-ray study of [Re(O^tBu)₂(CO)]₂ (μ-C^tBu)₂ shows it to consist of two distorted trigonal bipyramids connected by two symmetrically bridging neopentylidyne ligands. The unbridged dimers of general formula [Re(CCMe₂R)(OR′)₂]₂ do not react readily with simple substrates such as phosphines, olefins, or acetylenes, although [Re(CCMe₂R)(O^tBu)₂]₂ can be oxidized by iodine to yield Re(CCMe₂R)(O^tBu)₂I₂ in good yield. In contrast, {Re[OCMe(CF₃)₂]₂}₂(μ-C^tBu)₂ reacts with one equivalent of phenylacetylene to give a species in which one of the two bridging alkylidyne ligands is retained.     

Photochemical reactions of alkynyl iron (II) complexes with carbon disulfide. Insertion of CS2 into an iron-C(sp) bond

The novel alkynyldithiocarboxylate complexes [Fe(η⁵-C₅H₅)(S₂CCCR) (dppm-P)] (3a,b) and [Fe(η₅-C₅H₅)(S₂CCCR)(PPh₃)] (4a,b) were obtained through the insertion of CS₂ into the iron-akynyl bond in the complexes [Fe(η₅-C₅H₅)(CCR)(L)(L′] L, L′ = dppm R = Ph (1a), ^tBu(1b); L = (CO), L′ = (PPh₃) R = Ph (2a), ^tBu (2b). Variable-temperature ³¹P{¹H} NMR studies indicate the presence of two different isomers, [Fe(η⁵-C₅H₅)(η³-S,C,S′---S₂CCCR)(L)(L′)] and [Fe(η⁵-C₅H₅(η²-S,S′-S₂CCCR)(L)(L′)], which rapidly interconvert at room temperature. The synthesis of the precursor complex [Fe(η⁵-C₅H₅)(CC^tBu)(CO)(PPh₃)] is also described.     

Structural evolutions of the n-heneicosane and n-tricosane molecular alloys at 293 K

A structural study of odd-numbered n-alkane (C_n) binary mixtures (C₂₁ : C₂₃) was carried out on powder samples using a Guinier-de Wolff camera with increasing concentration of n-C₂₃ at 293 K.

Despite the reports in the literature, these molecular alloys do not form an orthorhombic continuous homogeneous solid solution to C₂₁ from C₂₃ at “low temperature”. Instead, as already observed in two even-numbered C_n systems, X-ray diffraction results show the existence of seven solid solutions as the molar concentration of C₂₃ increases: four terminal solid solutions, denoted β₀(C₂₁)β₀(C₂₃), isostructural with the “low temperature” phase of pure C₂₁ and C₂₃ (Pbcm), β′₀(C₂₁) and β′₀(C₂₃), identical to the phase β′₀ which appears in pure C₂₃ above the δ transition, and three orthorhombic intermediate solid solutions, designated β″₁, β′₁ and β″₂.

On the basis of powder X-ray photographs, the phases β″₁ and β″₂ (C₂₁ : C₂₃) are indistinguishable, and they are isostructural with the intermediate solid solution β″ of the even-numbered C_n binary systems (C₂₂ : C₂₄) and (C₂₄ : C₂₆). The phase β′₁(C₂₁ : C₂₃) is also isostructural with the two indistinguishable intermediate solid solutions β′₁ and β′₂ of the molecular alloys (C₂₂ : C₂₄) and (₂₄ : C₂₆).

From this study and our other laboratory results, the sequences of appearance of the solid solutions and the structural identities between these phases are established at “low temperature” for all the binary molecular alloys of consecutive C_n (odd-odd, even-even or odd-even: 19 < n < 27) when increasing the solute concentration.     

Oxidative addition of organic halides to zerovalent palladium complexes containing rigid bidentate nitrogen ligands

Zerovalent complexes of the type Pd(Ar-BIAN)(alkene), i.e. complexes containing the rigid bidentate nitrogen ligands bis(arylimino) acenaphthene (Ar = p-Tol, p-MeOC₆H₄, o-Tol,o,o′-Me₂C₆H₃, o,o′-ⁱPr₂C₆H₃) and an electron-poor alkene have been shown to react with a variety of (organic) halides RX, including methyl, benzyl, aryl, acyl and allylic halides, to give the corresponding square planar divalent Pd(R)X(Ar-BIAN) or [Pd(η³-allyl)(Ar-BIAN)]X complexes. The new complexes obtained have been fully characterized and their fluxional behaviour in solution studied by ¹H NMR spectroscopy. The rate of oxidative addition of iodomethane to Pd(p-Tol-BIAN)(alkene) complexes was found to decrease with increasing Pd-alkene bond strength, i.e. dimethyl fumarate fumaronitrile, but oxidative addition to the fumaronitrile complex was accelerated by irradiation with a mercury lamp. Oxidative addition of allylic ha     

Investigation on lanthanide binuclear complexes of 1,5-bis-(1′-phenyl-3′-methyl-5′-pyrazolone-4′)-1,5-pentanedione and 2,2′-bipyridine

The coordination of 1,5-bis-(1′-phenyl-3′-methyl-5′-pyrazolone-4′)-1,5-pentanedione (BPMPPD) and 2,2′-bipyridine (bipy) with lanthanide ions in water-alcohol solution has been studied. Binuclear complexes of the types : Ln₂(BPMPPD)₃(bipy)₂·nH₂O (n = 2 for Y, n = 4 for Eu, Gd, Dy, Ho, Er, Tm and Yb); Ln₂(BPMPPD)₃bipy·nH₂O (n = 10 for La, n = 3 for Pr, Nd, Sm and Tb) were formed. The compounds were characterized by elemental analysis, molar conductance, IR, UV, ¹H NMR spectroscopy, thermogravimetric analysis and fluorescence spectra.     

Synthesis, crystal structure and third-order non-linear optical property of heterobimetallic cluster compound [MoOICu3S3(2,2′-bipy)2]

Nest-shaped cluster [MoOICu₃S₃(2,2′-bipy)₂] (1) was synthesized by the treatment of (NH₄)₂MoS₄, CuI, (n-Bu)₄NI, and 2,2′-bipyridine (2,2′-bipy) through a solid-state reaction. It crystallizes in monoclinic space group P2₁/n, a=9.591(2) Å, b=14.820(3) Å, c=17.951(4) Å, β=91.98(2)°, V=2549.9(10) ų, and Z=4. The nest-shaped cluster was obtained for the first time with a neutral skeleton containing 2,2′-bipy ligand. The non-linear optical (NLO) property of [MoOICu₃S₃(2,2′-bipy)₂] in DMF solution was measured by using a Z-scan technique with 15 ns and 532 nm laser pulses. The cluster has large third-order NLO absorption and the third-order NLO refraction, its ₂ and n₂ values were calculated as 6.2×10⁻¹⁰ and −3.8×10⁻¹⁷ m² W⁻¹ in a 3.7×10⁻⁴ M DMF solution.     

Effect of sulphur on both thermal and dielectric properties of pre-compressed FEF black-loaded SBR vulcanizates

The thermal properties (thermal conductivity λ, thermal diffusivity a, and specific heat C_p) as well as the dielectric constant ε′ and dielectric loss ε′ of conductive styrene butadiene rubber loaded with different concentrations of sulphur were measured. It was found that both λ and C_p increase gradually at around 1 phr of sulphur content. Meanwhile, the dielectric constant ε′, showed a pronounced peak at 2 phr of sulphur content. Moreover, the effect of hydrostatic pressure on the dielectric constant ε′ and dielectric loss ε′ was found to rise with pre-compression.     

Novel cyclopentadienyl silanes and disilanes: synthesis, structure and gas-phase pyrolysis

The new chloro(cyclopentadienyl)silanes Cp′SiH_yCl_3−y (Cp′=Me₄EtC₅, y=1: 1; Cp′=Me₄C₅H, y=1: 2; y=0: 3; Cp′=Me₃C₅H₂, y=1: 4 and pentachloro(cyclopentadienyl)disilanes Cp′Si₂Cl₅ (Cp′=Me₅C₅ 5, Me₄EtC₅ 6, Me₄C₅H 7, Me₃C₅H₂ 8, Me₃SiC₅H₄ 9) are synthesized in good yields via metathesis reactions. Treatment of 1–9 with LiAlH₄ leads under Cl–H exchange to the hydridosilyl compounds Cp′SiH₃ (Cp′=Me₄EtC₅ 10, Me₄C₅H 11, Me₃C₅H₂ 12) and to the hydridodisilanyl compounds Cp′Si₂H₅ (Cp′=Me₅C₅ 13, Me₄EtC₅ 14, Me₄C₅H 15, Me₃C₅H₂ 16, Me₃SiC₅H₄ 17). Complexes 1–17 are characterized by ¹H, ¹³C, and ²⁹Si-NMR spectroscopy, IR spectroscopy, mass spectrometry and CH-analysis. The structures of 6, 7 and 9 are determined by single-crystal X-ray diffraction analysis. Pyrolysis studies of the cyclopentadienylsilanes 10–12 and disilanes 13–17 show their suitability as precursors in the MOCVD process.     

Optimised hydrothermal synthesis of multi-dimensional hybrid coordination polymers containing flexible organic ligands

In this paper, we summarise our recent research interest in the hydrothermal synthesis and structural characterisation of multi-dimensional coordination polymers. The use of N-(phosphonomethyl)iminodiacetic acid (also referred to as H₄pmida) in the literature as a versatile chelating organic ligand is briefly reviewed. This molecule plays an important role in the formation of centrosymmetric dimeric [V₂O₂(pmida)₂]⁴⁻ anionic units, which were first used by us as building blocks to construct novel coordination polymers. Starting with [V₂O₂(pmida)₂]⁴⁻ in solution, we have isolated [M₂V₂O₂(pmida)₂(H₂O)₁₀] species (where M²⁺ = Mn²⁺, Co²⁺ or Cd²⁺) via the hydrothermal synthetic approach, which were then employed for the construction of [CdVO(pmida)(4,4′-bpy)(H₂O)₂]·(4,4′-bpy)_0.5·(H₂O), [CoVO(pmida)(4,4′-bpy)(H₂O)₂]·(4,4′-bpy)_0.5, [Co(H₂O)₆][CoV₂O₂(pmida)₂(pyr)(H₂O)₂]·2(H₂O) and [Cd₂V₂O₂(pmida)₂(pyr)₂(H₂O)₄]·4(H₂O) by the inclusion of bridging organic ligands in the reactive mixtures, such as pyrazine (pyr) and 4,4′-bipyridine (4,4′-bpy). These materials can contain channel systems, and exhibit magnetic behaviour, not only due to the V⁴⁺ centres but also to the transition metal centres which establish the links between neighbouring dimeric [V₂O₂(pmida)₂]⁴⁻ anionic units. A closely related anionic moiety, [Ge₂(pmida)₂(OH)₂]²⁻, was engineered to allow the study of such crystalline hybrid materials using one- and two-dimensional high-resolution solid-state NMR.     

Synthesis, structures and reactivity of triosmium clusters containing terminal pyrazines, bridging hydroxy and methoxycarbonyl ligands

Four triosmium carbonyl clusters bearing terminal pyrazines, bridging hydroxy and methoxycarbonyl ligands of general formula [Os₃(CO)₉(μ-OH)(μ-OMeCO)L] (1, L = pyrazine; 2, L = 2-methylpyrazine; 3, L = 2,3-dimethylpyrazine; 4, L = 2,3,5-trimethylpyrazine) were synthesized by the reactions of [Os₃(CO)₁₂] with the corresponding pyrazine derivatives and water in the presence of a methanolic solution of Me₃NO in moderate yields. Compounds [Os₃(CO)₉(μ-OH)(μ-OMeCO)L] react with a series of two electron donor ligands, L′ at ambient temperature to give [Os₃(CO)₉(μ-OH)(μ-OMeCO)L′] (5, L′ = PPh₃; 6, L′ = P(OMe)₃; 7, L′ = ^tBuNC; 8, L′ = C₅H₅N) in good yields by the displacement of the pyrazine ligands. This implies that the pyrazine ligands in 1–4 are relatively labile. Compounds 2, 3, 4, and 8 were characterized by single crystal X-ray diffraction analyses. All the four compounds possess two metal–metal bonds and a non-bonded separation of two osmium atoms defined by Os(1)Os(3), which are simultaneously bridged by OH and MeOCO ligands and a heterocyclic ligand is terminally coordinated to one of the two non-bonded osmium atoms.     

Reactivity of carbon monoxide towards high valent molybdenum complexes

Reaction of carbon monoxide (3 atm) with Mo(O)₂(mes)₂ (mes = MESITYL = C₆H₂Me₃-2,4,6) in pyridine at room temperature affords dimesityl ketone 1 (5%) and 1,1′-bis(mesitoyl)-1,1′,4,4′-tetrahydro-4,4′-bipyridine 2 (25%), the molecular structure of which has been determined by an X-ray diffraction study. The formation of 2 represents the first example of N-acylation of a pyridine by CO mediated by a transition metal complex. It has been shown that the relative ratio of 1 and 2 is dependent on the reaction conditions and that the presence of pyridine is essential for the formation of 1. Reactions of CO with the isoelectronic complex Mo(N^tBu)₂mes₂ contrast sharply with Mo(O)₂mes₂ and, under the same conditions, no dihydropyridine is formed, the sole identified products being 1 (60%) and mesityltertiobutyl amide HN(^tBu)COmes (40%). In light of the experimental results and of extended Hückel calculations on dioxo and diimido d⁰ molybdenum complexes, a tentative mechanism for the formation of 2 is proposed which involves oxycarbene-like intermediates in the case of the more electrophilic dioxo molybdenum species.     

Azo-containing phosphine complexes of palladium(II) and platinum(II) and their effectiveness in the Heck reaction: crystal and molecular structure of [PdCl2{PPh2{1-(4-MeC6H4N2)-2-OC(O)Me---C10H5}]·2EtOH

Reaction of Na[MCl₄] (M=Pd or Pd) with the azo-containing phosphines Ph₂P{1-(4-RC₆H₄N₂)-2-OR′-C₁₀H₅} {R=Me (I), NMe₂ (II); R′=C(O)Me} affords the complexes [MCl₂L₂] (1–4) in good yield. Complexes 1–4 have all been fully characterised by elemental analysis, ¹H-, ¹³C{¹H}-, and ³¹P{¹H}-NMR spectroscopy and UV–visible spectroscopy. The use of 1 in the Heck reaction has been investigated and shown to effect up to 1000 turnovers.     

Studies of nucleosides and nucleotides—XLV Purine cyclonucleosides.-12. Synthesis of adenine cyclonucleosides having 8,5′-0-anhydro linkage

A cyclonucleoside having an 8,5′-0-anhydro linkage was first synthesized by treatment of 8-bromo-2′-3′-O-isopropylideneadenosine with sodium hydride in dioxan at room temperature. The cyclonucleoside (III) has UV absorption properties similar to those reported for other 0-cyclonucleosides and shows a large positive Cotton curve in ORD and CD.

When compound III was heated in N H₂SO₄, 8-oxyadenosine (IV) and 8,5′-anhydro-8-oxyadenosine (V) were obtained. Heating III in 0·1N H₂SO₄ gave 5-(adenyl-8)-D-ribose (VI). Treatment of III with sodium hydride in DMF gave a nucleoside having an exocyclic methylene (VII).

Compound III was also reacted with potassium thiocyanate, sodium azide and hydrogen sulfide. In each case the nucleophiles attacked at C⁵′ and gave 5′-substituted 8-oxyadenosine.