Studies of the limiting currents associated with several oxidation reactions mediated by tris(2,2′-bipyridyl)iron(III) incorporated in nafion® films on carbon electrodes

The kinetics of the oxidation of ferrocyanide, catechol and tiron at carbon electrodes covered with Nafion films containing tris(2,2′-bipyridyl)iron(III) were studied by rotating-disc methods. Under conditions in which these reactions were confined to the film-solution interface, limiting currents were observed that were independent of both the substrate concentration and the electrode rotation rate. This saturated behaviour was interpreted in terms of the rate of electron transfer within the precursor complex formed between the dissolved substrate and the limited number of active mediator sites accessible on the coating surface.     

Photoinduced electron transfer from polystyrene pendant tris(2,2′-bipyridyl)ruthenium (II) complex to methylviologen

The characteristics of the photoinduced electron transfer reaction from polystyrene pendant tris(2,2′-bipyridyl)ruthenium (II) complex [Ru(bpy)] to methylviologen (MV²⁺) were studied. The rate constant k₁ from the excited state of the complex, Ru(bpy), to MV²⁺ were determined for both the polymeric and monomeric complexes from the lifetime τ of Ru(bpy) and the quenching rate of Ru(bpy) by MV²⁺. The polymer pendant Ru(bpy) showed three kinds of τ components ranging from 7 to 474 ns, in contrast to the monomeric complex, which showed one component of 350 ns. The k₁ values for both complexes were almost the same, on the order of 10⁸ L/mol s. The photoinduced electron transfer from solid-phase Ru(bpy) to liquid-phase MV²⁺ was realized by utilizing the polymer complex, and the solid–liquid interphase reaction system is discussed.     

Electrochemiluminescence sensor using tris(2,2′-bipyridyl)ruthenium(II) immobilized in Eastman-AQ55D–silica composite thin-films

An electrochemiluminescence (ECL) sensor with good long-term stability and fast response time has been developed. The sensor was based on the immobilization of tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) into the Eastman-AQ55D–silica composite thin films on a glassy carbon electrode. The ECL and electrochemistry of Ru(bpy)₃²⁺ immobilized in the composite thin films have been investigated, and the modified electrode was used for the ECL detection of oxalate, tripropylamine (TPA) and chlorpromazine (CPZ) in a flow injection analysis system and showed high sensitivity. Because of the strong electrostatic interaction and low hydrophobicity of Eastman-AQ55D, the sensor showed no loss of response over 2 months of dry storage. In use, the electrode showed only a 5% decrease in response over 100 potential cycles. The detection limit was 1 μmol l⁻¹ for oxalate and 0.1 μmol l⁻¹ for both TPA and CPZ (S/N=3), respectively. The linear range extended from 50 μmol l⁻¹ to 5 mmol l⁻¹ for oxalate, from 20 μmol l⁻¹ to 1 mmol l⁻¹ for TPA, and from 1 μmol l⁻¹ to 200 μmol l⁻¹ for CPZ.     

Prediction of the reduction potential of tris(2,2′‐bipyridinyl)iron(III/II) derivatives

The reduction potentials of a tris(2,2′‐bipyridinyl)iron (III/II) and iron(III/II) couples complexed with 2,2′‐bipyridinyl derivatives in acetonitrile are predicted using density functional theory. The calculation protocol proposed by Kim et al. (Kim, J. Park, Y. S. Lee, J. Comput. Chem. 2013, 34, 2233) showing reliable performance for the reduction potential is used. The four kinds of the functional groups, a methoxy group, a methyl group, a chlorine atom, and a cyanide group, are substituted at the ligands to examine the electronic effect on the reduction potential. Electron donating/withdrawing effect is analyzed by comparing the reduction potential having different substituents at the same position. The influence of the geometrical strain on the reduction potential is investigated. The good correlation between the experimental results and the calculated results is obtained. Not only the general trend, but also the detailed phenomena are correctly reproduced. The maximum deviation from the experimental value is 0.083 V for the methyl substitution at the position 4. The mean absolute error for the seven couples is 0.047 V. The difference of the reduction potential between the chlorine atom substituted at the positions 4 and 5, 0.1 V, is well described. The difference between the CN and the Cl substitution of 0.318 and 0.228 V for the position 4 and 5 is correctly obtained as 0.325 and 0.213 V, respectively. The simple linear relation between the lowest unoccupied molecular orbital (LUMO) energy of the Fe(III) complexes in solution and the calculated reduction potentials is obtained with the R² of 0.977. © 2014 Wiley Periodicals, Inc.     

Simultaneous determination of pethidine and methadone by capillary electrophoresis with electrochemiluminescence detection of tris(2,2′-bipyridyl)ruthenium(II)

In this paper, we described a simple and rapid method, capillary electrophoresis with electrochemiluminescence (CE–ECL) detection using tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺), to simultaneously detect pethidine and methadone. Analytes were injected to separation capillary of 67.5 cm length (25 μm i.d., 360 μm o.d.) by electrokinetic injection for 10 s at 10 kV. Under the optimized conditions: ECL detection at 1.20 V, 30 mM sodium phosphate (pH 6.0) as running buffer, separation voltage at 14.0 kV, 5 mM Ru(bpy)₃²⁺ with 50 mM sodium phosphate (pH 6.5) in the detection cell, the linear range from 2.0 × 10^− 6 to 2.0 × 10^− 5 M for pethidine and 5.0 × 10^− 6 to 2.0 × 10^− 4 M for methadone and detection limits of 0.5 μM for both of them were achieved (S/N = 3). Relative standard derivations of the ECL intensity were 2.09% and 6.59% for pethidine and methadone, respectively.     

CEC with tris(2,2′‐bipyridyl) ruthenium(II) electrochemiluminescent detection

For the first time, CEC was coupled with tris(2,2‐bipyridyl) ruthenium(II) ( Ru(bpy) electrochemiluminescence detection. Efficient CEC separations of proline, putrescine, spermidine and spermine were achieved when the pH of the mobile phase is in the range of 3.5–7.0. The optimum mobile phase for CEC separation is much less acidic than that for CZE separation, which matches better with the optimum pH for Ru(bpy) electrochemiluminescence detection and dramatically shortens the analysis time because of larger EOF at higher pH. The time for CEC separation of the polyamines is less than 12.5 min, which is about half as much as the time needed for CZE. The detection limits were 1.7, 0.2, and 0.2 μM for putrescine, spermidine, and spermine, respectively. The RSD of retention time and peak height of these polyamines were less than 0.85 and 6.1%, respectively. The column showed good long‐term stability, and the RSD of retention time is below 5% for 150 runs over one‐month use. The method was successfully used for the determination of polyamines in urine samples.     

Electrochemiluminescence from tris(2,2′-bipyridyl)ruthenium(II)-graphene-Nafion modified electrode

An electrochemiluminescence (ECL) sensor based on Ru(bpy)₃²⁺-graphene-Nafion composite film was developed. The graphene sheet was produced by chemical conversion of graphite, and was characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM), and Raman spectroscopy. The introduction of conductive graphene into Nafion not only greatly facilitates the electron transfer of Ru(bpy)₃²⁺, but also dramatically improves the long-term stability of the sensor by inhibiting the migration of Ru(bpy)₃²⁺ into the electrochemically inactive hydrophobic region of Nafion. The ECL sensor gives a good linear range over 1 × 10⁻⁷ to 1 × 10⁻⁴ M with a detection limit of 50 nM towards the determination of tripropylamine (TPA), comparable to that obtained by Nafion-CNT. The ECL sensor keeps over 80% and 85% activity towards 0.1 mM TPA after being stored in air and in 0.1 M pH 7.5 phosphate buffer solution (PBS) for a month, respectively. The long-term stability of the modified electrode is better than electrodes modified with Nafion, Nafion-silica, Nafion-titania, or sol-gel films containing Ru(bpy)₃²⁺. Furthermore, the ECL sensor was successfully applied to the selective and sensitive determination of oxalate in urine samples.     

Silver(I) ions-enhanced electrochemiluminescence of tris(2,2-bipyridyl)ruthenium(II)

In this paper, we demonstrate an electrochemiluminescence (ECL) enhancement of tris(2,2-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) by the addition of silver(I) ions. The maximum enhancement factor of about 5 was obtained on a glassy carbon electrode in the absence of co-reactant. The enhancement of ECL intensity was possibly attributed to the unique catalytic activity of Ag⁺ for reactions between Ru(bpy)₃³⁺ with OH. The higher enhancement was observed in phosphate buffer solutions compared with that from borate buffer solutions. This resulted from the fact that formation of nanoparticles with large surface area in the phosphate buffer solution exhibited high catalytic activity. The amount of Ag⁺, solution pH and working electrode materials played important roles for the ECL enhancement. We also studied the effects of Ag⁺ on Ru(bpy)₃²⁺/tripropylamine and Ru(bpy)₃²⁺/C₂O₄²⁻ ECL systems.     

Structures of 3,3′-dicarbometoxy-2,2′-bipyridine complexes with silver(I) and copper(II) cations

The structures of 3,3′-dicarbometoxy-2,2′-bipyridine (dcmbpy) complexes with copper(II) and silver(I) cations have been determined using single crystal X-ray-diffraction. The crystals of Cu(dcmbpy)Cl₂ are monoclinic, C2/c, a = 16.966(3), b = 18.373(3), c = 13.154(2) Å, β = 126.543(3)°. The crystals of Ag(dcmbpy)NO₃ · H₂O are also monoclinic, C2/c, a = 16.7547(13), b = 11.0922(9), c = 18.7789(18) Å, β = 100.228(7)°. The results have been compared with the literature data on the complexes of dcmbpy and its precursors: 2,2′-bipyridine (bpy) and 3,3′-dicarboxy-2,2′-bipyridine (dcbpy). Two types of complexes of 3,3′-carboxy derivatives of bpy are distinguished: (1) with metal atom bonded to two N atoms of the same molecule and (2) with metal atom bonded to two N atoms of two different molecules. The Cu(dcmbpy)Cl₂ complex belongs to the first type, whereas Ag(dcmbpy)NO₃ · H₂O belongs to the second type.     

Ultrasensitive electrogenerated chemiluminescence detection of DNA hybridization using carbon-nanotubes loaded with tris(2,2′-bipyridyl) ruthenium derivative tags

An ultrasensitive electrogenerated chemiluminescence (ECL) detection method of DNA hybridization based on single-walled carbon-nanotubes (SWNT) carrying a large number of ruthenium complex tags was developed. The probe single strand DNA (ss-DNA) and ruthenium complex were loaded at SWNT, which was taken as an ECL probe. When the capture ss-DNA with a thiol group was self-assembled onto the surface of gold electrode, and then hybridized with target ss-DNA and further hybridized with the ECL probe to form DNA sandwich conjugate, a strong ECL response was electrochemically generated. The ECL intensity was linearly related to the concentration of perfect-matched target ss-DNA in the range from 2.4 × 10⁻¹⁴ to 1.7 × 10⁻¹² M with a detection limit of 9.0 × l0⁻¹⁵ M. The ECL signal difference permitted to discriminate the perfect-matched target ss-DNA and two-base-mismatched ss-DNA. This work demonstrates that SWNT can provide an amplification platform for carrying a large number of ECL probe and thus resulting in an ultrasensitive ECL detection of DNA hybridization.     

Oxygen quenching of tris(2,2′-bipyridine) ruthenium(II) complexes in thin organic films

A study is presented of the quenching, by oxygen, of the luminescence of tris(2,2′-bipyridine) ruthenium(II) complexes immobilized in thin, transparent, polymer-based films. The film media consist of a water-insoluble linear polymer plasticized with a trialkylphosphate ester, in which the complex ruthenium cations are solubilized by ion pairing with organophilic anions such as tetraphenylborate.

Luminescence lifetimes were studied in relation oxygen concentration in a gas stream contiguous with the film medium, film thickness and concentration of the metal complex within the film medium. It is shown that the microheterogeneous environment of the luminescent complex, which has recently been implicated in the non-linear quenching responses of polymer-immobilized, transition metal complex oxygen sensors, may arise simply as a consequence of the limited solubility of the complex in the film medium. When solubility is limited, the partial precipitation of the complex results in a colloidal of luminescent particles which exhibit non- uniform susceptibilities to quenching by oxygen. Good solubility, and therefore linear quenching characteristics, are promoted by methyl substitution of the bipyridyl ligand and by use of a plasticizer (tributylphosphate) with marked cation solvating powers.     

Diporphyrinyl derivatives of 1,10-phenanthroline and 2,2′-bipyridyl

The title derivatives were synthesized containing two meso-tri-p-tolylpheneleneporphyrin units attached via amide bridges to 4, 7- and 4,4′ positions of the respective heteroaromatic spacers.     

Diastereoselective Ion Pairing of TRISPHAT Anions and Tris(4,4′-dimethyl-2,2′-bipyridine)iron(II)

Two configurationally stable, chiral anions (TRISPHAT, 1 ) behave as efficient hosts that control the configuration of a configurationally labile iron(II ) complex as the guest with high diastereoselectivity (>96 % de) upon ion pairing. The diastereoselectivity increases with decreasing solvent polarity.     

Tris(2,2′‐bipyridyl‐N,N′)­iron(II) diperchlorate

The title compound, [Fe(C₁₀H₈N₂)₃](ClO₄)₂, is isomorphous with the Zn^II and Ru^II analogues. A twofold axis passes through the metal atom and the midpoint of the C—C bond joining the two pyridine rings of one of the bi­pyridyl ligands.     

Preparation and photoluminescence characteristics of polysiloxane pendant tris(2,2′-bipyridine)ruthenium (II) complex

Polysiloxanes containing pendant tris(2,2′-bipyridine)ruthenium(II) complex (Ru(bpy)3²⁺) were prepared by reaction of polysiloxane-pendant 2,2′-bipyridine (PSiO-bpy) with cis-Ru(bpy)₂Cl₂. In methanol solution, the polymer pendant Ru(bpy)3²⁺ showed absorption maximum at 456nm and emission maximum at around 609nm, both of which are shifted to longer wavelength than the monomeric Ru(bpy)₃²⁺. The lifetime τ₀ of the excited polymer complex with low Ru(bpy)3²⁺ content was almost the same as that of the monomeric one in methanol (830ns), but τ₀ of the polymer with higher complex content was shorter because of a concentration quenching. In a solid state, τ₀ was much shorter (306–503ns) than that in a methanol solution contrary to the conventional polymeric system. Higher complex content in the polymer film caused higher glass transition temperature (Tg), but shorter τ₀. These results indicate concentration quenching in the polymer film. The excited polymer pendant Ru(bpy)3²⁺ was quenched by oxygen, and the relative emission intensity followed the Stern-Volmer equation. In a methanol solution the quenching rate constant (k_q) was the same order of magnitude as the monomeric complex, and independent of the complex content in the polymer. In a film, k_q was higher for the polymer with higher complex content.     

Hydrogen peroxide photoproduction by the semicarbazide—tris(2,2′-bipyridine)ruthenium(II)—oxygen system

A light-driven system consisting of tris(2,2′-bipyridine)ruthenium(II) (Ru(bpy)₃²⁺) as the photosensitizer, semicarbazide as the electron donor and molecular oxygen as the electron acceptor has been employed for hydrogen peroxide production. The efficiency of this photosystem markedly depends on pH: while the peroxide yield is almost negligible at acid, neutral or slightly alkaline pH, it reaches significant values at high hydroxide concentrations, the initial rate of H₂O₂ formation drastically increasing from pH 12 to pH 14. In 1 M NaOH solutions containing Ru(bpy)₃²⁺ and semicarbazide at optimum concentrations, the number of catalytic cycles (or turnover number) undergone by the ruthenium complex over the complete course of the photochemical reaction is as high as 1.1 × 10⁴.

Spectrofluorometric and laser flash photolysis techniques were used to study the primary photochemical reactions involving the excited state of the ruthenium complex as well as the photochemically generated species Ru(bpy)₃³⁺ and Ru(bpy)₃⁺. It is proposed that at pH 14 a sequence of reactions leading to O₂ photoreduction by electrons from semicarbazide takes place, with the concomitant formation of H₂O₂; the excited state of Ru(bpy)₃²⁺ appears to react via oxidative quenching by oxygen rather than via reductive quenching by semicarbazide. At neutral pH, in contrast, there is no H₂O₂ formation owing to the fact that semicarbazide is unable to reduce (Ru(bpy)₃³⁺ to Ru(bpy)₃²⁺, although the photoexcited ruthenium complex is quenched equally by oxygen.