以高锰酸钾引发苯乙烯—丙烯睛与纤维素的接枝共聚

本文研究了以高锰酸钾为引发剂、苯乙烯—丙烯腈为共聚单体的纤维素接枝共聚反应。实验表明在水作为反应介质的情况下,接聚反应可以顺利进行。讨论了影响接聚反应的一些参变数和接枝规律性,接聚纤维的红外光谱和元素分析说明接枝共聚反应不是完全按电荷转移络合物的形式聚合的,在接枝共聚物中,苯乙烯与丙烯腈的摩尔比随着接枝量的增加而上升,但苯乙烯链段的嵌段性较小。用扫描电镜及X-射线衍射观察和分析了接枝纤维,结果表明接聚反应主要在纤维的无定形区进行,形成的支链大分子间有一定的规整性。用DSC测试了接枝纤维的热性能,扫描结果有一个接枝共聚物的环化放热峰和两个分解吸热峰。此外,试验了接枝纤维的耐湿磨性、吸湿性、染色性和力学性能。     

UiO-66-NH2接枝吡啶亚胺钴系催化剂的合成及催化乙烯齐聚性能

以金属有机骨架(MOFs)UiO-66-NH2和吡啶-2-甲醛为原料,采用后合成修饰法制备一种UiO-66-NH2接枝吡啶亚胺配体,然后以UiO-66-NH2接枝吡啶亚胺配体和CoCl2·6H2O为原料,经配合反应,合成出一种UiO-66-NH2接枝吡啶亚胺钴系催化剂.采用傅里叶红外变换光谱(FT-IR)、X射线衍射(...     

超分子化合物[H3N(CH2)3NH3]•[Pb2(SIP)2]•6H2O的水热合成与表征

在水热条件下, 用NaH2SIP与Pb(Ⅱ)盐, 以1,3-丙二胺(1,3-PDA)作为结构导向剂进行反应, 得到化合物[H3N(CH2)3NH3]•[Pb2(SIP)2]•6H2O(1). 同时采用单晶X射线衍射、X射线粉末衍射、元素分析、红外光谱和荧光光谱对化合物1进行了表征.     

静电纺丝方法制备α2-K8P2W17MnO61纳米纤维

运用高压静电纺丝和程序升温焙烧的方法制备了α2-K8P2W17MnO61纳米纤维。通过红外光谱(FT-IR)和X射线粉末衍射(XRD)对纤维进行了表征．结果表明,制备的纳米纤维为纯杂多酸盐α2-K8P2W17MnO61,扫描电子显微镜(SEM)图形显示焙烧后获得纳米纤维的平均直径大约为140 nm.     

磁性MnO2-Fe3O4复合氧化物催化5-羟甲基糠醛氧化合成2,5-呋喃二甲酸研究

以不同晶型的MnO2为催化剂进行5-羟甲基糠醛(HMF)氧化反应,并将催化活性较高的α-MnO2与Fe3O4复合制备磁性MnO2-Fe3O4复合氧化物,采用X射线衍射(XRD)、扫描电镜(SEM)、X射线光电子能谱(XPS)、NH3/CO2程序升温脱附(NH3/CO2-TPD)及吡啶吸附红外光谱(Py-FTIR)对催化...     

纤维素丙酸酯-g-二乙二醇正十六烷基醚固-固相变材料的制备及性能

以二月桂酸二丁基锡(DBTDL)为催化剂,微晶纤维素为骨架材料,二乙二醇正十六烷基醚(E2C16)为相变材料,采用化学接枝法制备了系列纤维素丙酸酯-g-二乙二醇正十六烷基醚(CP-g-E2C16)固-固相变材料.利用傅里叶变换红外光谱(FTIR)、核磁共振氢谱(1H NMR)、差示扫描量热仪(DSC)、热重分析(TG)和X射线衍射(XRD)对CP-g-E2C16相变材料的结构和热性能进行了表征.结果表明,得到了E2C16的取代度和接枝含量分别为0.12~0.37和17.1%~33.4%的CP-g-E2C16固-固相变材料.CP-g-E2C16接枝共聚物的相变温度和相变焓分别为25~34℃和40~62 J/g,符合人的体感舒适温度范围.CP-g-E2C16固-固相变材料的耐热温度高于237℃,与E2C16相比提高21~40℃,有望应用于熔融纺丝法制备纤维素基储热调温纤维领域.     

膨化柞蚕丝内部形态和结构的研究

利用扫描电镜(SEM), 结合拉曼(Raman)光谱、 衰减全反射傅里叶变换红外(ATR-FTIR)光谱和X射线衍射(XRD)等方法研究了膨化型柞蚕丝的内部形态和结构, 表征了其热性能和力学性能. 结果表明, 虽然经过了相应的膨化处理, 柞蚕丝素蛋白分子链仍表现出具有高度取向的反平行β-折叠构象, 而其单丝是由许多带状微纤沿纤维轴平行组装而成, 且具有较高力学性能的纤维.     

硫脲表面修饰的ZnS∶Cd纳米晶的合成及表征

采用硫脲做为表面修饰剂,合成了硫脲表面修饰的掺杂Cd2 的ZnS纳米晶(ZnS∶Cd/SC(NH2)2),用X射线粉末衍射、透射电子显微镜、红外光谱以及荧光光谱等手段进行了表征.实验结果表明,Cd2 掺入了ZnS纳米晶中,硫脲分子中的S原子与该纳米晶表面的金属离子存在配位作用,ZnS∶Cd/SC(NH2)2纳米晶为分散性较好、平均粒径7 nm的球形粒子且具有良好的荧光性质.     

乙烯-四氟乙烯共聚物的结构表征

利用傅里叶变换红外光谱(溴化钾压片法与衰减全反射法)、X射线衍射和X射线光电子能谱法对粉末状和薄板状两种形态的乙烯-四氟乙烯共聚物(ETFE)进行了结构表征。傅里叶变换红外光谱法分析结果表明:ETFE粉末有明显的-CH2和-CF2吸收峰;X射线衍射法分析结果表明:ETFE薄板的分辨率优于ETFE粉末;X射线光电子能谱法分析结果表明:ETFE粉末与ETFE薄板的-CH2和-CF2基团含量基本一致。X射线光电子能谱分析结果显示:ETFE薄板存在有机硅类脱膜剂的污染,同时ETFE粉末存在更多吸附氧。     

氨基酸功能化Dawson型多阴离子[P_2Mo_(18)O_(62)]~(6-)化合物的合成及表征

在常规条件下,以质子化的L,D-组氨酸修饰Dawson型多阴离子[P2Mo18O62]6-,得到了一对新型的氨基酸功能化的多金属氧酸盐化合物:H4(L-HC6H9N3O2)2[P2Mo18O62].20.5H2O(1),H4(D-HC6H9N3O2)2[P2Mo18O62].20.5H2O(2).并用单晶X射线衍射,紫外光谱(UV),红外光谱(IR),元素分析(Elemental Analysis)等方法对化合物进行了表征.     

甲基丙烯酸双酯改性真丝的热性质

众所周知 ,真丝绸因具有柔和的光泽、细腻的手感、良好的舒适性和保健性而素有“纤维皇后”的美称 .但其极易起毛起皱 ,尤其是湿态下更为严重 ,这大大影响了它的实用价值 .70年代以来 ,人们就开始用化学整理的方法提高和改善真丝绸的各种性能 ,但所用整理剂含有游离甲醛 ,或经其整理后织物会释放对人体有害的甲醛 .随着人们生活水平的提高 ,人们对“绿色纺织品”的需求越来越迫切 ,要求整理向低甲醛、无甲醛方向发展 .近年来 ,人们对用单烯类和环氧化合物对真丝进行改性的研究作了大量的工作[1～ 4] ,这些改性在某种程度上能够改善真丝的性…     

一缩二乙醇二甲基丙烯酸酯对真丝接枝的反应性

研究了一缩二乙二醇二甲基丙烯酸酯在空气存在下，用过硫酸钾(KPS)在水液 中对真丝的接枝。对接枝的条件，如单体、引发剂、甲酸(FA)和乳化剂OP的浓度以 及温度和时间对接枝率的影响进行了测试。发现了较佳的接枝条件是：温度 = 80 ℃，时间 = 30 min，[KPS] = 1.85% (owm)，[OP] = 1% (owf)，[FA] = 0.2%。 接枝率的大小可以用单体浓度来调节，接枝活化能是86.94 kJ/mol。     

MODIFICATION OF SILK FIBER via EMULSION GRAFT COPOLYMERIZATION WITH FLUOROACRYLATE

2,2,3,3,4,4,5,5-Octafluoropentyl acrylate was grafted onto silk fiber in a two-step heterogeneous system through the vinyl bonds of acryloyloxyethyl isocyanate modified on the silk.The grafted copolylner was analyzed by FTIR and WAXD,and the results revealed that the fluoroacrylate was successfully grafted onto silk fiber and the crystalline structure of silk fibroin withβ-sheet structure was not changed after graft copolymerization.The FT-IR corrected method was used to simulate the grafting yield onto ...     

GRAFTING OF ETHYLENE GLYCOL DIMETHACRYLATE ONTO SILK IN AQUEOUS ALCOHOLIC SOLUTION

The grafting of ethylene glycol dimethacrylate (EGDMA) onto silk in aqueous alcohol systems using potassiumpersulfate (KPS) in the presence of air was investigated. Effects of grafting conditions, such as concentrations of monomer,initiator and formic acid, temperature and time, on the graft yield were determined. The optimum graft conditions were foundto be: T = 80℃, t = 30 min, [KPS] = 1.85% [on the weight ofmonomer (owm)]; [formic acid] = 0.2% (V/V); [EGDMA] =80% [on the weight of fiber (owf)]. The activation energy of grafting at 50-80℃ was found to be 71.31 kJ/mol for EGDMA.Grafting equations were also evaluated. The graft yield value can be regulated by the concentration of monomer. The graftcopolymerization of EGDMA onto silk is effective in improving the crease-proofing of silk fabrics.     

Preparation of anion exchanger by amination of acrylic acid grafted polypropylene nonwoven fiber and its ion-exchange property

To develop the polymeric adsorbent that possess anionic exchangeable function, PP-g-AA-Am fibers were prepared by photoinduced grafting of acrylic acid (AA) onto polypropylene (PP) nonwoven fibers and subsequent conversion of carboxyl group in grafted AA to an amine (Am) group by reaction with diethylene triamine (DETA). The amination of grafted AA increased with increase in the degree of grafting, the reaction time and temperature of the chemical modification process. Catalytic effect of metal chlorides such as AlCl(3) and FeCl(3) on the amination of grafted AA was significant but not essential to lead the amination. FT-IR and solid (13)C NMR data indicate that amine group was introduced into PP-g-AA fiber through amide linkage between grafted AA and DETA. The anion exchange capacity of PP-g-AA-Am fiber increased with increase in the degree of amination, but reached maximum value at about 60% amination of 150% grafted AA. PP-g-AA-Am fiber showed much higher maximum capacity for PO(4)-P and a similar capacity for NO(3)-N compared to commercial anion resins. Furthermore, the PP-g-AA-Am fiber also has adsorption ability for cations because of unaminated residual carboxyl group.     

蚕丝辐射接枝丙烯腈

以氯化锌水溶液为溶剂 ,用钴 60γ射线引发蚕丝均相溶液接枝丙烯腈 .研究了辐射吸收剂量、剂量率、铜离子浓度、蚕丝浓度和单体浓度及“后效应”对单体转化率、接枝率、接枝效率、接枝链分子量的影响 ;研究发现初始接枝效率主要取决于 [S]丝/ ( [S]丝 +[M]单) ,接枝效率随吸收剂量增加而增加 ;铜离子的存在使接枝链分子量下降 ,而对接枝率和接枝效率影响不大 ;用IR、TGA、DTA等多种方法对接枝物进行了表征 ,表明蚕丝接枝上聚丙烯腈后 ,其热学性能有较大提高 .     

丝胶-甲基丙烯酸甲酯接枝共聚物的合成与表征

在酸性水介质中,以硝酸铈铵为引发剂合成了丝胶-甲基丙烯酸甲酯接枝共聚物,其结构经1H NMR,IR,SEM和GPC表征。用正交试验法考察了各因素对接枝共聚反应的影响,结果表明,单体浓度对接枝聚合反应的影响最大,反应时间的影响最小。     

Double plasma treatment-induced graft polymerization of carbohydrated monomers on poly(ethylene terephthalate) fibers

This study deals with the grafting of carbohydrate monomers on poly(ethylene terephthalate) fibers by double argon plasma treatment. Two monomers were used: allyl alpha-D-galactopyranoside and 2-methacryloxyethyl glucoside. The quantity of grafted carbohydrates was determined by phenol/sulfuric acid colorimetric titration. The graft density was observed to vary according to the monomer used. Allyl alpha-D-galactopyranoside yields to smaller graft densities compared to 2-methacryloxyethyl glucoside, suggesting transfer reactions occurring at the surface with allyl alpha-D-galactopyranoside. Fibers with the highest graft levels were obtained with the higher monomer concentration and the lower quantity of fiber treated in a plasma reactor. The grafting density can be modulated by the monomer concentration and mass of fiber exposed in the plasma reactor. For 0.5 mg of fibers, the graft densities for 23 and 68 mM allyl alpha-D-galactopyranoside are, respectively, 18 and 35 nmol/cm2. For 0.5 mg of fibers, the graft densities for 19 and 38 mM 2-methacryloxyethyl glucoside are, respectively, 150 and 250 nmol/cm2. Comparative study without the preactivation treatment shows the efficiency of the preactivation: for a mass of fiber of 0.5 mg and a 2-methacryloxyethyl glucoside concentration of 38 mM, the grafting density without plasma pretreatment is 38 nmol/cm2. Attenuated total reflectance Fourier transform infrared spectra confirmed the anchoring of the glycopolymer onto the poly(ethylene terephthalate) surfaces. Atomic force microscopy and scanning electronic microscopy pictures indicated their morphological changes.     

淀粉乙酸酯的阴离子接枝己内酯聚合研究

将淀粉在二甲基甲酰胺、吡啶存在下 ,以乙酸酐进行部分乙酰化 ,制备取代度为 0 7～ 1 9的淀粉乙酸酯 (St Ac) .以萘钠与淀粉乙酸酯中残余的羟基反应 ,将羟基转化为醇盐 (ONa) ,引发己内酯进行阴离子开环接枝聚合 ,合成了淀粉 聚己内酯接枝共聚物 (St g PCL) .采用凝胶渗透色谱法 (GPC)研究了接枝前后聚合物分子量的变化情况 ,并以接枝率、单体转化率对接枝反应进行了表征 .研究了接枝条件如温度、溶剂、引发剂和单体的用量对接枝率及单体转化率的影响 .研究发现随着反应温度升高 ,接枝率、单体转化率呈S曲线变化 ,单体浓度、引发剂浓度的增大有利于接枝反应的进行 .     

Heterogeneous grafting on polymers containing chlorine: Grafting of amide groups in water suspension and the reactivity of the new polymer towards epoxy resins

Heterogeneous grafting on polyvinylchloride suspended in water was carried out using N-butyl-3-mercaptopropionamide as nucleophile. Over 50% graft was obtained by using a small amount of solvent as a swelling agent and tricapryl methyl ammonium chloride as a phase transfer catalyst. Elemental analysis of the grafted polymer shows that the chlorine displaced from the polymers is replaced by the thio-amide group. The above conclusion is supported by NMR and IR analysis. The kinetics of the chlorine displacement from PVC by the thio amide group obeys the Shell progressive mechanism. The rate at which an individual spherical particle reacts depends on the diffusion through the reacted layer. The grafted polymer is soluble in tetrahydrofuran or nitrobenzene. The films obtained from the grafted material are brittle due to excessive internal hydrogen bonding. The electrostatic charge which is a characteristic surface phenomena in PVC is diminished in the grafted polymer which may be due to the existence of the amide group near the surface. The amide groups attached to the side chains on the polymer may participate in various reactions, e.g., with epoxy resins. IR analysis of the cured film indicates the disappearance of the oxiran band at 913 cm^?1 and an increase in the hydroxyl band around 3300 cm^?1. Thus, grafting of amide groups on PVC enables us to further modify PVC by epoxy resins.