Design of a CW 1 THz Gyrotron (Gyrotron Fu Cw III) Using a 20 T Superconducting Magnet

Design of a CW 1 THz gyrotron at second harmonic operation using a 20 T superconducting magnet has been described. The mode competition analysis is employed to investigate operation conditions of second harmonic mode, which is being excited at the frequency ranging from 920 GHz to 1014 GHz. The output power up to 250 watt corresponding to the efficiency of 4.16 percent could be achieved by using an electron beam with accelerating voltage 30 kV and current 200 mA. The important advantage of this gyrotron is that the single mode excitation at second harmonic, and extremely high frequency of the radiation, could be maintained even at high currents. It opens possibility to realize a high power radiation source at 1 THz. Such gyrotron is under construction at FIR Center, University of Fukui.     

Performance Test of CW 300?GHz Gyrotron FU CW I

A 300 GHz CW gyrotron FU CW I has been developed and installed in the Research Center for Development of Far-Infrared Region, University of Fukui as a power source of a high frequency material processing system. Its performance was tested and the maximum power of 1.75 kW / CW has been attained at the beam voltage of 15 kV and the beam current of 1A. The maximum window power efficiency of 15.5% has been obtained at the cathode voltage slightly lower than 15 kV. This gyrotron is designed to deliver a Gaussian beam after mode conversion from the oscillation mode TE_22,8 in the cavity with a complex of an internal radiator and beam shaping mirrors. The detailed measurement with an infrared camera has confirmed that a Gaussian beam is radiated when the magnetic field strength B _c at the cavity is adjusted at a proper value. However, within a range of B _c , the output power is emerged into multiple directions, which suggests simultaneous oscillation of competing cavity modes.     

Higher Harmonic Operations of Submillimeter Wave Gyrotrons (Gyrotron FU Series)

Higher harmonic operation of gyrotrons is necessary to obtain high frequencies. Some gyrotrons included in the Gyrotron FU series developed at Fukui University have achieved operation at the third and even fourth harmonics of the electron cyclotron frequency. The output lies in the millimeter to submillimeter wavelength range and the output powers are several watts to several tens of watts. In this paper, the gyrotrons and the conditions under which they operate are described in detail.     

Detailed Consideration of Experimental Results of Gyrotron FU CW II Developed as a Radiation Source for DNP-NMR Spectroscopy

A CW gyrotron for the sensitivity enhancement of NMR spectroscopy through dynamic nuclear polarization has been designed. The gyrotron operates at the second harmonic and frequency of 394.6 GHz with the main operating mode TE_0,6. Operating conditions of other neighboring cavity modes such as TE_2,6 at frequency of 392.6 GHz and TE_2,3 at frequency of 200.7 GHz were also considered. The experimental conditions of the gyrotron at low and high voltages are simulated. The output power of 56 watts corresponds to the efficiency of 2 percent at low voltage operation and frequency of 394.6 GHz is expected.     

The Design of the 394.6 Ghz Continuously Tunable Coaxial Gyrotron for DNP Spectroscopy

Results of the numerical investigations of the coaxial-cavity gyrotron with smooth frequency tuning are presented. The tuning is achieved by moving an internal cone-shaped rod along the device axis, which ensures smooth variations in eigenfrequencies of the cavity. The application of an inner conductor with an impedance surface reduces the thermal load on the internal road. The calculation results demonstrate the possibility of tuning the oscillator frequency by 8 GHz for the 394.6 GHz central frequency (within a frequency band of about 2%) with an output power of about several hundreds watts in the CW regime.     

CW Operation of a Submillimeter Wave Gyrotron (Gyrotron Fu IV) for High Stability of the Output Frequency

The first cw operation of our submillimeter wave gyrotron (Gyrotron FU IV) using a 12 T superconducting magnet has been successfully carried out. Output power is more than 20 W at a frequency of 301 GHz in the TE₀₃₁ resonant cavity mode. Time-resolved frequency measurement s shows that the frequency fluctuation of the gyrotron output is smaller than 2 MHz. This frequency fluctuation is mainly due to the fluctuation in the output voltage of the power supply.     

Long Pulse Operation of the THz Gyrotron with a Pulse Magnet

Long pulse operation up to 1 msec of a high frequency gyrotron with a pulse magnet has been successfully carried out in a frequency range including 1 THz. In the experiments, the timing of an electron beam pulse injection is adjusted at the top of the magnetic field pulse, where the variation of field intensity is negligible. The operation cavity modes seem to be TE_{1, 12} and TE_4,12 at the second harmonics. The corresponding frequencies are 903 GHz and 1,013 GHz, respectively. Additionally several features of radiation measurement results of the gyrotron are described and brief considerations are presented.     

Conceptual Design Study of a Novel Gyrotron for NMR/DNP Spectroscopy

In this paper we present some initial results from a conceptual design study focused on the development of a novel frequency tunable gyrotron for nuclear magnetic resonance (NMR) spectroscopy with signal enhancement based on the utilization of high field radiation and dynamic nuclear polarization (DNP) technique. The first variants of both the electron optical system and the resonant cavity which have been designed aiming continuous frequency tunability in a broad frequency band are presented and discussed. The selected method for frequency tunability is based on the excitation of higher order axial modes and smooth transition between them. It was selected after a critical examination of the known theoretical and practical results related to the frequency control in gyrotrons. It is believed that the current conceptual design is an appropriate basis for development of the next (optimized) design which will include also a detailed design of other components (mode converter, output window etc.) and magnetic circuit (superconducting magnet and supplementary solenoids) as well as for the overall mechanical design and fabrication of the prospective gyrotron.     

Nonlinear Regime of Amplitude Modulation in Submillimeter Wave Gyrotrons (Gyrotron FU III and IV)

Amplitude modulation in submillimeter wave gyrotrons resulting from the modulation of the anode voltage of electron gun is studied in detail. Computer simulations for the nonlinear regime, where the modulation rate of the anode voltage is not proportional to the amplitude modulation, model the experimental results quite accurately.     

Design of a Powerful and Compact THZ Oscillator

According to simulations, a Large Orbit Gyrotron with a 30 keV/1 A electron beam and magnetic field of 5 T can produce CW radiation with output power of 10²−10³ W at the frequencies of 0.4–0.5 THz.     

Synthesis,crystal growth and characterization of novel semiorganic nonlinear optical crystal: Dichloro(beta-alanine)cadmium(II)

Semiorganic nonlinear optical material of dichloro(beta-alanine)cadmium(II) (DCBAC) have been synthesized and single crystals were grown by solvent evaporation method at room temperature. The lattice parameters of the grown crystals are determined by single crystal XRD. The modes of vibration of different molecular groups present in the sample were identified by the FTIR spectral analysis. Thermal stability of the crystal was investigated using thermo gravimetric analysis (TGA) and differential thermal analysis (DTA). The dielectric constants of the crystal were studied as a function of frequency and the results are discussed. The grown crystals are subjected to microhardness studies and the variation of the microhardness with the applied load is studied. The optical transmission spectra and second harmonic generation (SHG) were investigated to study its linear and nonlinear optical properties. The nonlinear optical (NLO) property of the crystal was confirmed by powder second harmonic generation (SHG) test. SHG efficiency is comparable to that of KDP.     

基于散射实验极化靶的2.5T/1.3K的动态核极化(DNP)系统的开发

动态核极化法(Dynamic Nuclear Polarization, DNP)是利用热平衡下的电子在磁场中的高自旋极化率转移到原子核自旋的技术,从而极大的提高原子核自旋极化率。多种动态极化靶材料已广泛的用于自旋物理散射实验。本文介绍一种简单实用,共同开发的日本山形大学DNP系统,包括超导磁场,氦4蒸发恒冷器,微波系统以及NMR核磁共振检测系统,测得中子靶材料氘带丁醇(D-butanol)中氘核的极化率在2.5T/1.3K达到+6.5%。     

Magnetic, electric, and optical functionalities of (PLZT)x(BiFeO3)1−x ferroelectric-ferromagnetic thin films

We have prepared a series of (PLZT)_x(BiFeO₃)_1−x transparent thin films with thickness of 300 nm by a thermal pyrolysis method. Only films with x≦0.10 formed a single phase of perovskite structure. The film where x=0.10 exhibited both ferromagnetic and ferroelectric properties at room temperature with spontaneous magnetization and coercive magnetic fields of 0.0027μ_B and 5500 G, respectively. The remanent electric polarization and coercive electric field for the film where x=0.10 were 3.0 μC/cm² and 24 kV/cm, respectively. Additionally, films with 0.02≦x≦0.10 showed both magneto-optical effects and the second harmonic generation of transmitted light.     

Submillimeter laser action of CW optically pumped CF2Cl2 (Fluorocarbon 12)

Eleven new CW far infrared (FIR) laser lines have been observed in the 600 m–1200 m range from the CF₂Cl₂ (Fluorocarbon 12) molecule optically pumped by a CO₂ laser. A 510^–4–10^–3 accuracy is achieved in the measurement of the FIR wavelengths.The frequency offset between the CO₂ pump center and the absorption line centers are measured using the transferred Lamb dip technique. Owing to a recent spectroscopic study of the CF₂ ³⁵Cl₂ molecule three lines may be assigned with great confidence as rotational transitions in thev ₆ vibrational band 923 cm^–1 of this main isotope.     

Violet light generation by frequency doubling of GaAlAs diode laser using a metallo-organic complex crystal ZnCd(SCN)4

Violet 404-nm radiation is generated by type-I single-pass frequency doubling of the output of an GaAlAs diode laser in critically phase-matched ZnCd(SCN)₄ (ZCTC) crystal, a metallo-organic complex crystal. In this paper, its refractive index and second-harmonic generation phase-matching angles are reported. Using a 3-mm-long ZCTC crystal, a diode laser power of 473 mW generated 390 μW of second-harmonic radiation. More recently, 380-nm, 20 μW ultraviolet (UV) radiation is also realized by frequency doubling of the 100 mW output of a continuous-wave Ti:sapphire laser at 760 nm. ZCTC is a promising UV nonlinear optical candidate material for frequency doubling of diode lasers.     

Investigation on the growth,optical and thermal studies of a novel organic nonlinear optical crystal: l-Threonine diformate (LTDF)

l-Threonine diformate (LTDF), a novel organic nonlinear optical crystal has been synthesized and grown by slow evaporation technique. The grown crystals were subjected to single crystal and powder X-ray diffraction studies. Functional groups present in the material were identified by FT IR spectral analysis. Absorption spectrum shows that the crystal is found to be transparent in the visible region. Thermal analysis was performed to study the thermal stability of the crystal. The SHG efficiency of the grown crystal was confirmed by Kurtz–Perry powder technique.     

Semi-Constant-Time HMSQC (SCT-HMSQC-HA) for the Measurement of JHH Couplings in N-Labeled Proteins

A simple method for accurately measuring ³J_H^NH^α coupling constants in ¹⁵N-labeled proteins is described. This semi-constant-time HMSQC-HA experiment combines the rapidity and convenience of the recently introduced CT-HMQC-HA scheme (Postingl and Otting, J. Biomol. NMR 12, 319–324 (1998)) with the high resolution and robustness of the HSQC experiment. The proposed method is demonstrated for the 76-residue human ubiquitin and Saccharopolyspora erythraea calerythrin (176 residues). Our results imply that the SCT-HMSQC-HA experiment is suitable also for proteins with less favorable NMR properties due to its good resolution and sensitivity.     

A non-equilibrium atmospheric pressure Capacitively-Coupled-Plasma (CCP) driven at VHF (162 MHz) for plasma catalysis of CO2 into CO

The design of a Very-High-Frequency (VHF) 162 MHz driven atmospheric-pressure Capacitively-Coupled-Plasma (CCP), with top and bottom electrodes operated in push-pull configuration, powered via a Power-Splitting-Transmission-Line-Driver (PSTLD), is presented. Application to the reprocessing of carbon dioxide into carbon-monoxide in this "high” VHF atmospheric plasma is presented, demonstrating some behaviour of the plasma source. rf power in the system is characterized using measured current (~ 1′s Amps peak) and voltage (~ 10′s Volts peak) waveforms at the electrode; Both are sinusoidal confirming a glow-discharge operational condition. Analysis of Optical Emission Spectra results find a highly non-equilibrium plasma, with high vibrational temperatures (from N₂) in the range ~4000 K, while gas temperature, monitored by a thermocouple at the gas outlet, remains low ~300 K, and confirmed by analysis of the N₂ rotational bands. The relative density of CO produced, as a by-product of CO₂ dissociation, is measured optically using N₂ as an actinometer. The CO density increases with rf power and longer gas residence times in the plasma volume. The high VHF atmospheric plasma is found to operate in pure CO₂ flows (no helium) with minimal gas heating for the full range of power densities (specific energy input of 0.4–2 eV per molecule) investigated.