Correlation between C-H and C-C spin-spin coupling constants and s character of hybrids calculated by the maximum overlap method

For some thirty hydrocarbons the s character of hybrids obtained by the application of the maximum overlap method have been correlated with C-H and C-C spin-spin coupling constants. The following relationships were obtained: $$J_{{\text{C}}^{{\text{13}}} - {\text{H}}} = 1079a_{{\text{CH}}}^{\text{2}} /(1 + S_{{\text{CH}}}^{\text{2}} ) - 54.9$$ , $$J_{{\text{C}}_{\text{1}}^{{\text{13}}} - {\text{C}}_{\text{2}}^{{\text{13}}} } = 1020.5a_{{\text{C}}_{\text{1}} }^2 a_{{\text{C}}_{\text{2}} }^{\text{2}} /(1 + S_{{\text{CC}}}^{\text{2}} ) - 8.2$$ . Here the coupling constants are expressed in cps units. In the calculation of the maximum overlap hybrids either the experimental bond lengths or a standard bond lengths were used. For the \(J_{{\text{C}}^{{\text{13}}} - {\text{H}}}\) and \(J_{{\text{C}}^{{\text{13}}} - {\text{H}}} \) coupling constants the standard deviations are 0.9 cps and 1.9 cps respectively. It has been suggested that the large additive constant in the \(J_{{\text{C}}^{{\text{13}}} - {\text{H}}}\) correlation may be attributed to the ionic character of C-H bonds. A good agreement with the experimental data strongly supports the idea that the Fermi contact term and the hybridization are dominant factors in determining carbon-hydrogen and carbon-carbon spin-spin coupling constants across one bond, at least in hydrocarbons.     

Vibratio nal assig nme nts,co nformatio nal a nalysis,a nd molecular structures of $$\left[ {\text{C}_{\text{ n}} \text{mim}} \right]\left[ {\text{NTF}_{\text{2}} } \right]$$C nmimNTF2 ( n = 2, 4, 6, a nd 8) imidazolium-based io nic liquids: a combi ned experime ntal a nd qua ntum chemical approach

This work is aimed at providing physical insights about the interactions of cations, anion, and ion pairs of four imidazolium-based ionic liquids of \(\left[ {{\text{C}}_{\text{n}} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) with varying alkyl chain lengths (n = 2, 4, 6, and 8) using both DFT calculations and vibrational spectroscopic measurements (IR absorption and Raman scattering) in the mid- and far regions. The calculated Mulliken charge distributions of \(\left[ {{\text{C}}_{\text{n}} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) ion pairs indicate that hydrogen-bonding interactions between oxygen and nitrogen atoms (more negative charge) on \(\left[ {{\text{NTF}}_{2} } \right]^{ - }\) anion and the hydrogen atoms (more positive charge) on the imidazolium ring play a dominating role in the formation of ion pair. Thirteen stable conformers of \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) were optimized. According to our results, the strongest and weakest hydrogen bonds were existing in \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) and \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), respectively. A redshift of 290, 262, 258, and 257 cm^?1 has been observed for cations involving \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]^{ + }\), \(\left[ {{\text{C}}_{4} {\text{mim}}} \right]^{ + }\),\(\left[ {{\text{C}}_{6} {\text{mim}}} \right]^{ + }\), and stretching vibrations of \({\text{C}}12{-}{\text{H}}3\), respectively. By increasing the chain length, the strength of hydrogen bonds decreases as a result of \({\text{C}}12{-}{\text{H}}3\) bond elongation and less changes are observed in stretching vibrations of \({\text{C}}12{-}{\text{H}}3\) compared to the free cations. To the best of our knowledge, this research is the first work which reports the far-IR of \(\left[ {{\text{C}}_{4} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), \(\left[ {{\text{C}}_{6} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), and \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) and the mid-IR of \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\).     

Mechanism of the catalyzed by cysteine electroreduction of the insoluble in water cobalt(II) salt as a component of carbon paste electrode

The mechanism of the Co(II) catalytic electroreduction of water insoluble CoR₂ salt in the presence of cysteine was developed. CoR₂ = cobalt(II) cyclohexylbutyrate is the component of a carbon paste electrode. Electrode surface consecutive reactions are: (a) fast (equilibrium) reaction of the complex formation, (b) rate-determining reversible reaction of the promoting process of CoR(Ac⁺) complex formation, (c) rate-determining irreversible reaction of the electroactive complex formation with ligand-induced adsorption, and (d) fast irreversible reaction of the electroreduction. Reactions (a,b) connected with CoR₂ dissolution and reactions (c,d) connected with CoR₂ electroreduction are catalyzed by . Regeneration of (reactions “b,d”) and accumulation of atomic Co(0) (reaction “d”) take place. Experimental data [Sugawara et al., Bioelectrochem Bioenergetics 26:469, 1991]: i _a vs E (i _a is anodic peak, E is cathodic accumulation potential), i _a vs , and i _a vs pH have been quantitatively explained.     

Effect of size of tetraalkylammonium counterions on the temperature dependent micellization of AOT in aqueous medium

Different tetraalkylammonium, viz. N⁺(CH₃)₄, N⁺(C₂H₅)₄, N⁺(C₃H₇)₄, N⁺(C₄H₉)₄ along with simple ammonium salts of bis (2-ethylhexyl) sulfosuccinic acid have been prepared by ion-exchange technique. The critical micelle concentration of surfactants with varied counterions have been determined by measuring surface tension and conductivity within the temperature range 283–313 K. Counterion ionization constant, α, and thermodynamic parameters for micellization process viz., $\Delta G_m^{\text{0}} $ , $\Delta H_m^{\text{0}} $ , and $\Delta S_m^{\text{0}} $ and also the surface parameters, Γ_max and A_min, in aqueous solution have been determined. Large negative $\Delta G_m^{\text{0}} $ of micellization for all the above counterions supports the spontaneity of micellization. The value of standard free energy, $\Delta G_m^{\text{0}} $ , for different counterions followed the order $${\text{N}}^{\text{ + }} \left( {{\text{CH}}_{\text{3}} } \right)_4 >{\text{NH}}_{\text{4}}^{\text{ + }} >{\text{Na}}^{\text{ + }} >{\text{N}}^{\text{ + }} \left( {{\text{C}}_{\text{2}} {\text{H}}_5 } \right)_{\text{4}} {\text{ $>$ N}}^{\text{ + }} \left( {{\text{C}}_{\text{3}} {\text{H}}_{\text{7}} } \right)_4 >{\text{N}}^{\text{ + }} \left( {{\text{C}}_{\text{4}} {\text{H}}_{\text{9}} } \right)_4 $$ , at a given temperature. This result can be well explained in terms of bulkiness and nature of hydration of the counterion together with hydrophobic and electrostatic interactions.     

Thermodynamic studies on Pr2TeO6

The standard Gibbs energy of formation of Pr₂TeO₆ $ (\Updelta_{\text{f}} G^{^\circ } \left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} ,\;{\text{s}}} \right)) $ was derived from its vapour pressure in the temperature range of 1,400–1,480 K. The vapour pressure of TeO₂ (g) was measured by employing a thermogravimetry-based transpiration method. The temperature dependence of the vapour pressure of TeO₂ over the mixture Pr₂TeO₆ (s) + Pr₂O₃ (s) generated by the incongruent vapourization reaction, Pr₂TeO₆ (s) = Pr₂O₃ (s) + TeO₂ (g) + ½ O₂ (g) could be represented as: $ { \log }\left\{ {{{p\left( {{\text{TeO}}_{ 2} ,\;{\text{g}}} \right)} \mathord{\left/ {\vphantom {{p\left( {{\text{TeO}}_{ 2} ,\;{\text{g}}} \right)} {{\text{Pa}} \pm 0.0 4}}} \right. \kern-0em} {{\text{Pa}} \pm 0.0 4}}} \right\} = 19. 12- 27132\; \left({\rm{{{\text{K}}}}/T} \right) $ . The $ \Updelta_{\text{f}} G^{^\circ } \;\left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} } \right) $ could be represented by the relation $ \left\{ {{{\Updelta_{\text{f}} G^{^\circ } \left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} ,\;{\text{s}}} \right)} \mathord{\left/ {\vphantom {{\Updelta_{\text{f}} G^{^\circ } \left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} ,\;{\text{s}}} \right)} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}}} \right. \kern-0em} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}} \pm 5.0} \right\} = - 2 4 1 5. 1+ 0. 5 7 9 3\;\left(T/{\text{K}}\right) .$ Enthalpy increments of Pr₂TeO₆ were measured by drop calorimetry in the temperature range of 573–1,273 K and heat capacity, entropy and Gibbs energy functions were derived. The $ \Updelta_{\text{f}} H_{{298\;{\text{K}}}}^{^\circ } \;\left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} } \right) $ was found to be $ {{ - 2, 40 7. 8 \pm 2.0} \mathord{\left/ {\vphantom {{ - 2, 40 7. 8 \pm 2.0} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}}} \right. \kern-0em} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}} $ .     

Molecular Structure of tert-Butylazide: A Gas-Phase Electron Diffraction and Quantum Chemical Study

The molecular structure of tert-butylazide has been determined by gas-phase electron diffraction and quantum chemical calculations. The HF/6-31G* and B3LYP/6-31G** calculations yielded near C _s symmetry for the tert-butyl group, anti conformation of the (C)N—N bond with respect to one of the bonds, and an essentially free rotation around the bond with a 0.34 kcal/mol energy difference between syn and anti conformations of the CNNN moiety, the anti being the more stable form. The electron diffraction analysis was carried out by modeling a mixture of conformational isomers, generated by rotating the terminal nitrogen of the azide group, using a computed rotational potential. The data are consistent with C _s symmetry for the tert-butyl group. The bond, however, was found to be rotated out of the anti position, with respect to one of the bonds, by 12.5(12)°. The electron diffraction analysis yielded the following bond lengths (r _g), bond angles, and torsional angles: , .     

Thermochemical properties of the coordination complex of 8-hydroxyquinolinato-bis-(salicylato) praseodymium (III)

The product, [Pr(C₇H₅O₃)₂(C₉H₆NO)], which was formed by praseodymium nitrate hexahydrate, salicylic acid (C₇H₆O₃), and 8-hydroxyquinoline (C₉H₇NO), was synthesized and characterized by elemental analysis, UV spectra, IR spectra, molar conductance, and thermogravimetric analysis. In an optimalizing calorimetric solvent, the dissolution enthalpies of [Pr(NO₃)₃·6H₂O(s)], [2 C₇H₆O₃(s) + C₉H₇NO(s)], [Pr(C₇H₅O₃)₂(C₉H₆NO)(s)], and [solution D (aq)] were measured to be, by means of a solution-reaction isoperibol microcalorimeter, $ \begin{gathered}\Updelta_{\text{s}} H_{\text{m}}^{\theta}\left[ {{ \Pr }\left( {{\text{NO}}_{ 3} } \right)_{ 3} \cdot 6{\text{H}}_{ 2} {\text{O}}\left( {\text{s}} \right), 2 9 8. 1 5{\text{ K}}} \right] \, = - ( 20. 6 6 { } \pm \, 0. 29)\,{\text{kJ}}\,{\text{mol}}^{ - 1} , \\\Updelta_{\text{s}} H_{\text{m}}^{\theta } \left[ { 2 {\text{C}}_{7} {\text{H}}_{ 6} {\text{O}}_{ 3} \left( {\text{s}} \right) +{\text{ C}}_{ 9} {\text{H}}_{ 7} {\text{NO}}\left( {\text{s}}\right),{ 298}. 1 5 {\text{ K}}} \right] \, = \, ( 4 2. 2 7 { }\pm \, 0. 3 1)\,{\text{kJ}}\,{\text{mol}}^{ - 1} , \\\Updelta_{\text{s}} H_{\text{m}}^{\theta } \left[ {{\text{solutionD }}\left( {\text{aq}} \right), 2 9 8. 1 5 {\text{ K}}} \right] \,= - \left( { 8 9. 1 5 { } \pm \, 0. 4 3}\right)\,{\text{kJ}}\,{\text{mol}}^{ - 1} , \\\end{gathered} $ Δ s H m θ [ Pr ( NO 3 ) 3 · 6 H 2 O ( s ) , 2 9 8.1 5 K ] = ? ( 20.6 6 ± 0.2 9 ) kJ mol ? 1 , Δ s H m θ [ 2 C 7 H 6 O 3 ( s ) + C 9 H 7 NO ( s ) , 298.1 5 K ] = ( 4 2.2 7 ± 0.3 1 ) kJ mol ? 1 , Δ s H m θ [ solution D ( aq ) , 2 9 8.1 5 K ] = ? ( 8 9.1 5 ± 0.4 3 ) kJ mol ? 1 , and $ \Updelta_{\text{s}} H_{\text{m}}^{\theta } \left\{ {\left[ {{\Pr }\left( {{\text{C}}_{ 7} {\text{H}}_{ 5} {\text{O}}_{ 3} }\right)_{ 2} \left( {{\text{C}}_{ 9} {\text{H}}_{ 6} {\text{NO}}}\right)} \right]\left( {\text{s}} \right),{ 298}. 1 5 {\text{ K}}}\right\} \, = - \left( { 4 1.0 4 { } \pm \, 0. 3 3}\right)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ Δ s H m θ { [ Pr ( C 7 H 5 O 3 ) 2 ( C 9 H 6 NO ) ] ( s ) , 298.1 5 K } = ? ( 4 1.0 4 ± 0.3 3 ) kJ mol ? 1 , respectively. Through an improved thermochemical cycle, the enthalpy change of the designed coordination reaction was calculated to be $\Updelta_{\text{r}} H_{\text{m}}^{\theta} = \, ( 2 1 3. 1 8\pm0. 6 9)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ Δ r H m θ = ( 2 1 3.1 8 ± 0.6 9 ) kJ mol ? 1 , the standard molar enthalpy of the formation was determined as $ \Updelta_{\text{f}} H_{\text{m}}^{\theta} \left\{ {\left[ {{\Pr }\left( {{\text{C}}_{ 7} {\text{H}}_{ 5} {\text{O}}_{ 3} }\right)_{ 2} \left( {{\text{C}}_{ 9} {\text{H}}_{ 6} {\text{NO}}}\right)} \right]\left( {\text{s}} \right), 2 9 8. 1 5 {\text{K}}}\right\} \, = \, - \, ( 1 8 7 5. 4\pm 3.1)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ Δ f H m θ { [ Pr ( C 7 H 5 O 3 ) 2 ( C 9 H 6 NO ) ] ( s ) , 2 9 8.1 5 K } = ? ( 1 8 7 5.4 ± 3.1 ) kJ mol ? 1 .     

Inner-sphere oxidation of a ternary dipicolinatochromium(III) complex involving a malonic acid co-ligand

The oxidation of a ternary complex of chromium(III), [Cr^III(DPA)(Mal)(H₂O)₂]^?, involving dipicolinic acid (DPA) as primary ligand and malonic acid (Mal) as co-ligand, was investigated in aqueous acidic medium. The periodate oxidation kinetics of [Cr^III(DPA)(Mal)(H₂O)₂]^? to give Cr(VI) under pseudo-first-order conditions were studied at various pH, ionic strength and temperature values. The kinetic equation was found to be as follows: \( {\text{Rate}} = {{\left[ {{\text{IO}}_{4}^{ - } } \right]\left[ {{\text{Cr}}^{\text{III}} } \right]_{\text{T}} \left( {{{k_{5} K_{5} + k_{6} K_{4} K_{6} } \mathord{\left/ {\vphantom {{k_{5} K_{5} + k_{6} K_{4} K_{6} } {\left[ {{\text{H}}^{ + } } \right]}}} \right. \kern-0pt} {\left[ {{\text{H}}^{ + } } \right]}}} \right)} \mathord{\left/ {\vphantom {{\left[ {{\text{IO}}_{4}^{ - } } \right]\left[ {{\text{Cr}}^{\text{III}} } \right]_{\text{T}} \left( {{{k_{5} K_{5} + k_{6} K_{4} K_{6} } \mathord{\left/ {\vphantom {{k_{5} K_{5} + k_{6} K_{4} K_{6} } {\left[ {{\text{H}}^{ + } } \right]}}} \right. \kern-0pt} {\left[ {{\text{H}}^{ + } } \right]}}} \right)} {\left\{ {\left( {\left[ {{\text{H}}^{ + } } \right] + K_{4} } \right) + \left( {K_{5} \left[ {{\text{H}}^{ + } } \right] + K_{6} K_{4} } \right)\left[ {{\text{IO}}_{4}^{ - } } \right]} \right\}}}} \right. \kern-0pt} {\left\{ {\left( {\left[ {{\text{H}}^{ + } } \right] + K_{4} } \right) + \left( {K_{5} \left[ {{\text{H}}^{ + } } \right] + K_{6} K_{4} } \right)\left[ {{\text{IO}}_{4}^{ - } } \right]} \right\}}} \) where k ₆ (3.65 × 10^?3 s^?1) represents the electron transfer reaction rate constant and K ₄ (4.60 × 10^?4 mol dm^?3) represents the dissociation constant for the reaction \( \left[ {{\text{Cr}}^{\text{III}} \left( {\text{DPA}} \right)\left( {\text{Mal}} \right)\left( {{\text{H}}_{2} {\text{O}}} \right)_{2} } \right]^{ - } \rightleftharpoons \left[ {{\text{Cr}}^{\text{III}} \left( {\text{DPA}} \right)\left( {\text{Mal}} \right)\left( {{\text{H}}_{2} {\text{O}}} \right)\left( {\text{OH}} \right)} \right]^{2 - } + {\text{H}}^{ + } \) and K ₅ (1.87 mol^?1 dm³) and K ₆ (22.83 mol^?1 dm³) represent the pre-equilibrium formation constants at 30 °C and I = 0.2 mol dm^?3. Hexadecyltrimethylammonium bromide (CTAB) was found to enhance the reaction rate, whereas sodium dodecyl sulfate (SDS) had no effect. The thermodynamic activation parameters were estimated, and the oxidation is proposed to proceed via an inner-sphere mechanism involving the coordination of IO₄ ^? to Cr(III).     

Computer-aided cooling curve thermal analysis of near eutectic Al–Si–Cu–Fe alloy

The effects of bismuth (Bi), antimony (Sb) and strontium (Sr) additions on the characteristic parameters of the evolution of aluminium dendrites in a near eutectic Al–11.3Si–2Cu–0.4Fe alloy during solidification at different cooling rates (0.6–2 °C) were investigated by computer-aided cooling curve thermal analysis (CA-CCTA). Nucleation temperature ( $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} $ ) is defined with a new approach based on second derivative cooling curve. The results showed that $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} $ increased with increasing cooling rate but both the growth temperature ( $ T_{\text{G}}^{{\alpha {\text{ - Al}}}} $ ) and the coherency temperature (T _DCP) decreased. Increase in the temperature difference for dendrite coherency ( $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} - T_{\text{DCP}} $ ) with increasing cooling rate indicate a wider range of temperature before the dendrite can impinge on each other and higher fraction solid ( $ f_{\text{S}}^{\text{DCP}} $ ). Additions of Bi, Sb and Sr to the base alloy produced only a minor effect on $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} $ . Additions of Bi and Sb resulted in an increase in fraction solid and an increase of 30 % in the value of $ T_{\text{N}}^{{\alpha {\text{ - Al}}}} \, - \,T_{\text{G}}^{{\alpha {\text{ - Al}}}} $ to almost 13 °C.     

A Cadmium Coordination Polymer Based on Phosphate Clusters: Synthesis,Crystal Structure,Electrochemical Investigation and Antibacterial Activity

A new d¹⁰ coordination polymer, \(\left\{ {\left( {{\text{C}}_{5} {\text{H}}_{14} {\text{N}}_{2} } \right)_{2} \left[ {{\text{Cd}}\left( {\left( {{\text{P}}_{6} {\text{O}}_{18} } \right)\left( {{\text{H}}_{2} {\text{O}}} \right)_{2} } \right)} \right] \cdot 6{\text{H}}_{2} {\text{O}}} \right\}_{n}\), was prepared and characterized by X-ray diffraction, IR-Raman spectroscopy, thermal analysis and cyclic voltammetry. The crystal structure determination reveals that the phosphate anions alternate with the cadmium octahedral to form an anionic coordination polymer extending along [001] direction. The double protonated homopiperazine cations and the water molecules ensure the interconnection between polymers and thus giving rise to three dimensional supramolecular networks. By means of cyclic voltammetry, it is shown that whilst the reduction of the complexed Cd²⁺ occurs with a biggest difficulty than this of its free form, the anodic oxidation of the heterocyclic N donor piperazine became quite easy, when it is displayed as a counterpart diprotonated cation, between the anionic layers of \(\left[ {{\text{Cd}}({\text{P}}_{6} {\text{O}}_{18} )({\text{H}}_{2} {\text{O}})_{2} )} \right]_{\text{n}}^{{4{\text{n}} - }}\). The antibacterial activity of the coordination polymer is also discussed.     

System Zn–Rh–O: heat capacity and Gibbs free energy of formation using differential scanning calorimeter and electrochemical cell

The standard molar Gibbs free energy of formation of ZnRh₂O₄(s) has been determined using an oxide solid-state electrochemical cell wherein calcia-stabilized zirconia (CSZ) was used as an electrolyte. The oxide cell can be represented by: . The electromotive force was measured in the temperature range from 943.9 to 1,114.2 K. The standard molar Gibbs energy of formation of ZnRh₂O₄(s) from elements in their standard state using the oxide electrochemical cell has been calculated and can be represented by: . Standard molar heat capacity C ^o _p,m(T) of ZnRh₂O₄(s) was measured using a heat flux-type differential scanning calorimeter in two different temperature ranges, from 127 to 299 and 307 to 845 K. The heat capacity in the higher temperature range was fitted into a polynomial expression and can be represented by: . The heat capacity of ZnRh₂O₄(s), was used along with the data obtained from the oxide electrochemical cell to calculate the standard enthalpy and entropy of formation of the compound at 298.15 K.     

The Second Dissociation Constant of Carbonic Acid in Ethanol–Water Mixtures from 5 to 45°C

The determination of the second dissociation constant of carbonic acid K ₂ in 5, 15, and 25 mass% ethanol—water mixed solvents has been made using cell of the type:

A thermodynamic study of complexation of 18-crown-6 with Zn2+, Tl+, Hg2+ and {\text{UO}}^{{{\text{2 + }}}}_{{\text{2}}} cations in acetonitrile-dimethylformamide binary media and study the effect of anion on the stability constant of (18C6-Na+) complex in methanol solutions

The equilibrium constants and thermodynamic parameters for complex formation of 18-crown-6(18C6) with Zn²⁺, Tl⁺, Hg²⁺ and $ {\text{UO}}^{{{\text{2 + }}}}_{{\text{2}}} $ cations have been determined by conductivity measurements in acetonitrile(AN)-dimethylformamide(DMF) binary solutions. 18-crown-6 forms 1:1 complexes [M:L] with Zn²⁺, Hg²⁺ and $ {\text{UO}}^{{{\text{2 + }}}}_{{\text{2}}} $ cations, but in the case of Tl⁺ cation, a 1:2 [M:L₂] complex is formed in most binary solutions. The thermodynamic parameters ( $ \Delta {\text{H}}^{ \circ }_{{\text{c}}} $ and $ \Delta {\text{S}}^{ \circ }_{{\text{c}}} $ ) which were obtained from temperature dependence of the equilibrium constants show that in most cases, the complexes are enthalpy destabilized but entropy stabilized and a non-monotonic behaviour is observed for variations of standard enthalpy and entropy changes versus the composition of AN/DMF binary mixed solvents. The obtained results show that the order of selectivity of 18C6 ligand for these cations changes with the composition of the mixed solvent. A non-linear relationship was observed between the stability constants (logK_f) of these complexes with the composition of AN/DMF binary solutions. The influence of the $ {\text{ClO}}^{ - }_{{\text{4}}} $ , $ {\text{NO}}^{ - }_{{\text{3}}} $ and $ {\text{Cl}}^{ - } $ anions on the stability constant of (18C6-Na⁺) complex in methanol (MeOH) solutions was also studied by potentiometry method. The results show that the stability of (18C6-Na⁺) complex in the presence of the anions increases in order: $ {\text{ClO}}^{ - }_{{\text{4}}} $  >  $ {\text{NO}}^{ - }_{{\text{3}}} $  >  $ {\text{Cl}}^{ - } $ .     

Kinetics and Mechanism of the Reduction of Enneamolybdonickelate(IV) by Arsenite

The kinetics and mechanism of the reduction of enneamolybdonickelate(IV) by arsenite in aqueous acid solution was studied by spectrophotometry. The reaction rate increases with increasing concentrations of H⁺ and with temperature. The associated rate law is: . The rate constants and activation parameters of the rate-determining step were evaluated. A mechanism related to this reaction was proposed.     

Kinetics and mechanism of oxidation of the chromium(III)-DL-aspartic acid complex/periodate reaction. Evidence for iron(II) catalysis

The kinetics of oxidation of the chromium(III)-DL- aspartic acid complex, [CrIIIHL]+ by periodate have been investigated in aqueous medium. In the presence of Fe^II as a catalyst, the following rate law is obeyed:

Thermochemistry of hydroxymethylphenol isomers

The standard (p° = 0.1 MPa) molar enthalpies of formation in the crystalline state of the 2-, 3- and 4-hydroxymethylphenols, $ {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} ( {\text{cr)}} = \, - ( 3 7 7. 7 \pm 1. 4)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ , $ {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} ( {\text{cr) }} = - (383.0 \pm 1.4) \, \,{\text{kJ}}\,{\text{mol}}^{ - 1} $ and $ {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} ( {\text{cr)}} = - (382.7 \pm 1.4)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ , respectively, were derived from the standard molar energies of combustion, in oxygen, to yield CO₂(g) and H₂O(l), at T = 298.15 K, measured by static bomb combustion calorimetry. The Knudsen mass-loss effusion technique was used to measure the dependence of the vapour pressure of the solid isomers of hydroxymethylphenol with the temperature, from which the standard molar enthalpies of sublimation were derived using the Clausius–Clapeyron equation. The results were as follows: $ \Updelta_{\rm cr}^{\rm g} H_{\rm m}^{\rm o} = (99.5 \pm 1.5)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ , $ \Updelta_{\rm cr}^{\rm g} H_{\rm m}^{\rm o} = (116.0 \pm 3.7) \,{\text{kJ}}\,{\text{mol}}^{ - 1} $ and $ \Updelta_{\rm cr}^{\rm g} H_{\rm m}^{\rm o} = (129.3 \pm 4.7)\,{\text{ kJ mol}}^{ - 1} $ , for 2-, 3- and 4-hydroxymethylphenol, respectively. From these values, the standard molar enthalpies of formation of the title compounds in their gaseous phases, at T = 298.15 K, were derived and interpreted in terms of molecular structure. Moreover, using estimated values for the heat capacity differences between the gas and the crystal phases, the standard (p° = 0.1 MPa) molar enthalpies, entropies and Gibbs energies of sublimation, at T = 298.15 K, were derived for the three hydroxymethylphenols.     

Synthesis and structural characterization of three dinuclear Copper(II) complexes incorporating pyrazolyl-derived ligands

Three new binuclear copper complexes of formulae $ \left[ {{\text{Cu}}_{2}^{\text{II}} {\text{Pz}}_{2}^{\text{Me3}} {\text{Br}}_{ 2} \left( {{\text{PPh}}_{ 3} } \right)_{ 2} } \right] $ (1), $ \left[ {{\text{Cu}}_{ 2}^{\text{II}} {\text{Pz}}_{2}^{\text{Ph2Me}} {\text{Cl}}_{ 2} \left( {{\text{PPh}}_{ 3} } \right)_{ 2} } \right] $ (2) and $ \left[ {{\text{Cu}}_{2}^{\text{II}} \left( {{\text{Pz}}^{\text{PhMe}} } \right)_{ 4} {\text{Cl}}_{ 4} } \right] $ (3) (Pz^Me3?=?3,4,5-trimethylpyrazole, Pz^Ph2Me?=?4-methyl-3,5-diphenylpyrazole and Pz^PhMe?=?3-methyl-5-phenylpyrazole) have been synthesized and characterized by chemical analysis, FTIR and ³¹P NMR spectroscopy and single-crystal X-ray diffraction. Complex 1 is a doubly bromo-bridged dimer, while complexes 2 and 3 are chloro-bridged dimers. The Cu(II) centers are in a distorted tetrahedral geometry for 1 and 2 and a distorted square pyramidal N₂Cl₃ environment for 3.     

Raman Spectroscopic Study of Aluminum Silicate Complextion in Acidic Solutions from 25 to 150°C

Raman spectroscopic measurements were performed on aqueous acid to neutral silica-bearing solutions (0.005 ≤ m _Si ≤ 0.02, 0 ≤ pH ≤ 8) and Al–silica solutions at temperature from 20 to 150°C. At 20°C, the spectrum of silica-bearing solutions exhibits only the bands of water and a completely polarized band at 785 cm^?1. This band is attributed to the ν₁ band of the tetrahedral Si(OH)₄ molecule. In ${\text{Si(OH)}}_{\text{4}} {\kern 1pt} {\kern 1pt} - {\kern 1pt} {\text{AlCl}}_3 {\kern 1pt} - {\kern 1pt} {\text{HCl}}$ solutions, the intensity of this band decreases with increasing Al concentration, temperature, and pH. This decrease can be explained by the formation of an inner sphere complex between Al³⁺ and Si(OH)₄ according to the reaction: ${\text{Al}}^{{\text{3 + }}} {\text{ + H}}_{\text{4}} {\text{SiO}}_{\text{4}}^{\text{0}} ({\text{aq}}){\text{ }} \Leftrightarrow {\text{ AlH}}_{\text{3}} {\text{SiO}}_{\text{4}}^{{\text{2 + }}} {\text{ + H}}^{\text{ + }} $ The fraction of complexed silica deduced from raman spectroscopic measurements is in good agreement with that calculated for the similar solution compositions and temperatures using the complexation constant generated by Pokrovski et al. ⁽²³⁾ from potentiometric measurements. At ambient temperature, the formation of aluminum silicate complex is weak and does not account for more than ca. 5 % of the total Al in most natural waters. As temperature increases, this complex becomes more significant and can dominate Al speciation in acid (pH ≤ 2) hydrothermal solutions.     

Molecular Structure and Conformation of p-Bis(trimethylsilyl)benzene: A Study by Gas-Phase Electron Diffraction and Theoretical Calculations

The molecular structure and conformation of p-bis(trimethylsilyl)benzene have been investigated by gas-phase electron diffraction, ab initio MO calculations at the HF/6-31G*, MP2(f.c.)/6-31G*, and B3LYP/6-31G* levels, and MM3 molecular mechanics calculations. The calculations indicate the syn- and anti-coplanar conformations, with two bonds in the plane of the benzene ring, to be energy minima. The perpendicular conformations, with two bonds in a plane orthogonal to the ring plane, are transition states. The two coplanar conformers have nearly the same energy with a low interconversion barrier, 0.3–0.5 kJ mol^–1. The calculated lengths of the and bonds differ by only a few thousandths of an angstrom, in agreement with electron diffraction results from molecules containing either or bonds. The geometrical distortion of the benzene ring in p-bis(trimethylsilyl)-benzene may be described by superimposing independent distortions from each of the two SiMe₃ groups. The electron diffraction intensities from a previous study (Rozsondai, B.; Zelei, B.; Hargittai, I. J. Mol. Struct. 1982, 95, 187) have been reanalyzed, imposing constraints from the theoretical calculations, and using a model based on a 1:1 mixture of the two coplanar conformers. The effective torsion angles of the SiMe₃ groups may indicate nearly free rotation. Important geometrical parameters from the present electron diffraction analysis are , and . While the mean bond lengths are virtually the same from the previous and present analyses, the new ipso angle is in better agreement with the MO calculations [HF, 116.9° MP2(f.c.), 117.1° B3LYP, 116.9°].     

Oxidation of 3-(4-methoxyphenoxy)-1,2-propanediol by bis(hydrogen periodato)argentate(III) complex anion: a kinetic study

Oxidation of 3-(4-methoxyphenoxy)-1,2-propanediol (MPPD) by bis(hydrogenperiodato) argentate(III) complex anion, [Ag(HIO₆)₂]⁵⁻ has been studied in aqueous alkaline medium by use of conventional spectrophotometry. The major oxidation product of MPPD has been identified as 3-(4-methoxyphenoxy)-2-ketone-1-propanol by mass spectrometry. The reaction shows overall second-order kinetics, being first-order in both [Ag(III)] and [MPPD]. The effects of [OH⁻] and periodate concentration on the observed second-order rate constants k′ have been analyzed, and accordingly an empirical expression has been deduced: