Mixed-ligand metal-organic frameworks with large pores: gas sorption properties and single-crystal-to-single-crystal transformation on guest exchange

Two isomorphous 3D metal-organic frameworks, {[Cu2(BPnDC)2(bpy)].8 DMF.6 H2O}n (1) and {[Zn2(BPnDC)2(dabco)].13 DMF.3 H2O}n (2), have been prepared by the solvothermal reactions of benzophenone 4,4'-dicarboxylic acid (H2BPnDC) with Cu(NO3)(2).2.5 H2O and 4,4'-bipyridine (bpy), and with Zn(NO3)(2).6 H2O and 4-diazabicyclo[2.2.2]octane (dabco), respectively. Compounds 1 and 2 are composed of paddle-wheel {M2(O2CR)4} cluster units, and they generate 2D channels with two different large pores (effective size of larger pore: 18.2 A for 1, 11.4 A for 2). The framework structure of desolvated solid, [Cu2(BPnDC)2(bpy)]n (SNU-6; SNU=Seoul National University), is the same as that of 1, as evidenced by powder X-ray diffraction patterns. SNU-6 exhibits high permanent porosity (1.05 cm3 g(-1)) with high Langmuir surface area (2910 m2 g(-1)). It shows high H2 gas storage capacity (1.68 wt % at 77 K and 1 atm; 4.87 wt % (excess) and 10.0 wt % (total) at 77 K and 70 bar) with high isosteric heat (7.74 kJ mol(-1)) of H2 adsorption as well as high CO2 adsorption capability (113.8 wt % at 195 K and 1 atm). Compound 2 undergoes a single-crystal-to-single-crystal transformation on guest exchange with n-hexane to provide {[Zn2(BPnDC)2(dabco)].6 (n-hexane).3 H2O}n (2hexane). The transformation involves dynamic motion of the molecular components in the crystal, mainly a bending motion of the square planes of the paddle-wheel units resulting from rotational rearrangement of phenyl rings and carboxylate planes of BPnDC2-.     

Hydrogen storage in microporous metal-organic frameworks with exposed metal sites

Owing to their high uptake capacity at low temperature and excellent reversibility kinetics, metal-organic frameworks have attracted considerable attention as potential solid-state hydrogen storage materials. In the last few years, researchers have also identified several strategies for increasing the affinity of these materials towards hydrogen, among which the binding of H(2) to unsaturated metal centers is one of the most promising. Herein, we review the synthetic approaches employed thus far for producing frameworks with exposed metal sites, and summarize the hydrogen uptake capacities and binding energies in these materials. In addition, results from experiments that were used to probe independently the metal-hydrogen interaction in selected materials will be discussed.     

Selective CO2 adsorption by a triazacyclononane-bridged microporous metal-organic framework

Metal-organic frameworks constructed by self-assembly of metal ions and organic linkers have recently been of great interest in the preparation of porous hybrid materials with a wide variety of functions. Despite much research in this area and the large choice of building blocks used to fine-tune pore size and structure, it remains a challenge to synthesise frameworks composed of polyamines to tailor the porosity and adsorption properties for CO(2). Herein, we describe a rigid and microporous three-dimensional metal-organic framework with the formula [Zn(2)(L)(H(2)O)]Cl (L=1,4,7-tris(4-carboxybenzyl)-1,4,7-triazacyclononane) synthesised in a one-pot solvothermal reaction between zinc ions and a flexible cyclic polyaminocarboxylate. We have demonstrated, for the first time, that a porous rigid framework can be obtained by starting from a flexible amine building block. Sorption measurements revealed that the material exhibited a high surface area (135 m(2) g(-1)) and was the best compromise between capacity and selectivity for CO(2) over CO, CH(4), N(2) and O(2); as such it is a promising new selective adsorbent for CO(2) capture.     

Understanding adsorption and interactions of alkane isomer mixtures in isoreticular metal-organic frameworks

Novel metal-organic frameworks (MOFs) may lead to advances in adsorption and catalysis owing to their superior properties compared to traditional nanoporous materials. A combination of the grand canonical Monte Carlo method and configurational-bias Monte Carlo simulation was used to evaluate the adsorption isotherms of C4-C6 alkane isomer mixtures in IRMOF-1 and IRMOF-6. The amounts of adsorbed linear and branched alkanes increase with increasing pressure, and the amount of branched alkanes is larger than that of the linear ones. The locations of the alkane isomer reveal that the Zn4O clusters of the IRMOFs are the preferential adsorption sites for the adsorbate molecules. The interaction energy between the Zn4O cluster and the adsorbate is larger than that between the organic linker and the adsorbate. It was further confirmed that the Zn4O cluster plays a much more important role in adsorption by pushing a probe molecule into the pore at positions closer to the Zn4O cluster. It is difficult for branched alkane molecules to approach the Zn4O cluster of IRMOF-6 closely owing to strong spatial hindrance. In addition, the adsorption selectivity is discussed from the viewpoints of thermodynamics and kinetics, and the diffusion behavior of n-butane and 2-methylpropane were investigated to illustrate the relationship between diffusion and adsorption.     

Modifying cage structures in metal-organic polyhedral frameworks for H2 storage

Three isostructural metal-organic polyhedral cage based frameworks (denoted NOTT-113, NOTT-114 and NOTT-115) with (3,24)-connected topology have been synthesised by combining hexacarboxylate isophthalate linkers with {Cu(2)(RCOO)(4)} paddlewheels. All three frameworks have the same cuboctahedral cage structure constructed from 24 isophthalates from the ligands and 12 {Cu(2)(RCOO)(4)} paddlewheel moieties. The frameworks differ only in the functionality of the central core of the hexacarboxylate ligands with trimethylphenyl, phenylamine and triphenylamine moieties in NOTT-113, NOTT-114 and NOTT-115, respectively. Exchange of pore solvent with acetone followed by heating affords the corresponding desolvated framework materials, which show high BET surface areas of 2970, 3424 and 3394 m(2) g(-1) for NOTT-113, NOTT-114 and NOTT-115, respectively. Desolvated NOTT-113 and NOTT-114 show high total H(2) adsorption capacities of 6.7 and 6.8 wt%, respectively, at 77 K and 60 bar. Desolvated NOTT-115 has a significantly higher total H(2) uptake of 7.5 wt% under the same conditions. Analysis of the heats of adsorption (Q(st)) for H(2) reveals that with a triphenylamine moiety in the cage wall, desolvated NOTT-115 shows the highest value of Q(st) for these three materials, indicating that functionalisation of the cage walls with more aromatic rings can enhance the H(2)/framework interactions. In contrast, measurement of Q(st) reveals that the amine-substituted trisalkynylbenzene core used in NOTT-114 gives a notably lower H(2)/framework binding energy.     

Benzene-templated hydrothermal synthesis of metal-organic frameworks with selective sorption properties

In this paper, we report two metal-organic frameworks [Co3(ndc)3(bipyen)(1.5)]H2O (1) and [Co2(ndc)2bipyen)]C6H6.H2O (2) (bipyen=trans-1,2-bis(4-pyridyl)ethylene, H2ndc=2,6-naphthalenedicarboxylic acid). These compounds were both synthesized from identical hydrothermal reaction conditions except that benzene was added to the reaction for 2. Crystal structures show that the two compounds have triply interpenetrated three-dimensional frameworks and these frameworks have the same primary structure of a two-dimensional network of interconnected [Co2(O2CR)(4/2)] (R=naphthalene group) paddle-wheels and bridging bipyen ligands. Both compounds have guest water molecules and, in addition, 2 has guest benzene molecules. Structural transformations of the host accompanied guest removal, which can be monitored by powder X-ray diffraction. N2 adsorption data of 2 show that there are two different types of pores corresponding to the benzene and water pores. Upon exposure to vapors of several organic molecules, the heat-treated sample of 2 adsorbs benzene and cyclohexene, but does not adsorb toluene, (o-, m-, and p-)xylenes, cycloheptatriene, or cyclohexane.     

A new approach to construct a doubly interpenetrated microporous metal-organic framework of primitive cubic net for highly selective sorption of small hydrocarbon molecules

A new approach has been realized to construct a three‐dimensional doubly interpenetrated cubic metal–organic framework Zn₂(PBA)₂(BDC) ? (DMF)₃(H₂O)₄ ( UTSA‐36 , HPBA=4‐(4‐pyridyl) benzoic acid, H₂BDC=1,4‐benzenedicarboxylic acid) through the self‐assembly of the pyridylcarboxylate linker 4‐(4‐pyridyl) benzoate and bicarboxylate linker 1,4‐benzenedicarxylate with paddle‐wheel [Zn₂(COO)₄]. The activated UTSA‐36 a exhibits highly selective gas sorption of C₂H₆, C₂H₄ and C₂H₂ over CH₄ with the Henry law’s selectivities of 11 to 25 in the temperature range of 273 to 296 K attributed to the unique 3D intersected pore structure of about 3.1 to 4.8 Å within the framework, indicating that UTSA‐36 a is a potentially very useful and promising microporous material for such industrially important separation of C₂ hydrocarbons over methane.     

Elucidating gating effects for hydrogen sorption in MFU-4-type triazolate-based metal-organic frameworks featuring different pore sizes

A highly porous member of isoreticular MFU‐4‐type frameworks, [Zn₅Cl₄(BTDD)₃] (MFU‐4l(arge)) (H₂‐BTDD=bis(1H‐1,2,3‐triazolo[4,5‐b],[4′,5′‐i])dibenzo[1,4]dioxin), has been synthesized using ZnCl₂ and H₂‐BTDD in N,N‐dimethylformamide as a solvent. MFU‐4l represents the first example of MFU‐4‐type frameworks featuring large pore apertures of 9.1 Å. Here, MFU‐4l serves as a reference compound to evaluate the origin of unique and specific gas‐sorption properties of MFU‐4, reported previously. The latter framework features narrow‐sized pores of 2.5 Å that allow passage of sufficiently small molecules only (such as hydrogen or water), whereas molecules with larger kinetic diameters (e.g., argon or nitrogen) are excluded from uptake. The crystal structure of MFU‐4l has been solved ab initio by direct methods from 3D electron‐diffraction data acquired from a single nanosized crystal through automated electron diffraction tomography (ADT) in combination with electron‐beam precession. Independently, it has been solved using powder X‐ray diffraction. Thermogravimetric analysis (TGA) and variable‐temperature X‐ray powder diffraction (XRPD) experiments carried out on MFU‐4l indicate that it is stable up to 500 °C (N₂ atmosphere) and up to 350 °C in air. The framework adsorbs 4 wt % hydrogen at 20 bar and 77 K, which is twice the amount compared to MFU‐4. The isosteric heat of adsorption starts for low surface coverage at 5 kJ mol^?1 and decreases to 3.5 kJ mol^?1 at higher H₂ uptake. In contrast, MFU‐4 possesses a nearly constant isosteric heat of adsorption of ca. 7 kJ mol^?1 over a wide range of surface coverage. Moreover, MFU‐4 exhibits a H₂ desorption maximum at 71 K, which is the highest temperature ever measured for hydrogen physisorbed on metal–organic frameworks (MOFs).     

Enhancing gas adsorption and separation capacity through ligand functionalization of microporous metal-organic framework structures

Hydroxyl- and amino- functionalized [Zn(BDC)(TED)(0.5)]·2DMF·0.2H(2)O leads to two new structures, [Zn(BDC-OH)(TED)(0.5)]·1.5DMF·0.3H(2)O and [Zn(BDC-NH(2))(TED)(0.5)]·xDMF·yH(2)O (BDC=terephthalic acid, TED=triethylenediamine, BDC-OH=2-hydroxylterephthalic acid, BDC-NH(2)=2-aminoterephthalic acid). Single-crystal X-ray diffraction and powder X-ray diffraction studies confirmed that the structures of both functionalized compounds are very similar to that of their parent structure. Compound [Zn(BDC)(TED)(0.5)]·2DMF·0.2H(2)O can be considered a 3D porous structure with three interlacing 1D channels, whereas both [Zn(BDC-OH)(TED)(0.5)]·1.5DMF·0.3H(2)O and [Zn(BDC-NH(2))(TED)(0.5)]·xDMF·yH(2)O contain only 1D open channels as a result of functionalization of the BDC ligand by the OH and NH(2) groups. A notable decrease in surface area and pore size is thus observed in both compounds. Consequently, [Zn(BDC)(TED)(0.5)]·2DMF·0.2H(2)O takes up the highest amount of H(2) at low temperatures. Interestingly, however, both [Zn(BDC-OH)(TED)(0.5)]·1.5DMF·0.3H(2)O and [Zn(BDC-NH(2))(TED)(0.5)]·xDMF·yH(2)O show significant enhancement in CO(2) uptake at room temperature, suggesting that the strong interactions between CO(2) and the functionalized ligands, indicating that surface chemistry, rather than porosity, plays a more important role in CO(2) adsorption. A comparison of single-component CO(2), CH(4), CO, N(2), and O(2) adsorption isotherms demonstrates that the adsorption selectivity of CO(2) over other small gases is considerably enhanced through functionalization of the frameworks. Infrared absorption spectroscopic measurements and theoretical calculations are also carried out to assess the effect of functional groups on CO(2) and H(2) adsorption potentials.