Solid phase extractive preconcentration of uranium(VI) onto diarylazobisphenol modified activated carbon

Diarylazobisphenol (DAB) 1 and diarylazobisphenol modified carbon 2 were synthesized and characterised. The latter has been used for solid phase extractive preconcentration and separation of trace amounts of uranium(VI) from other inorganics. In this, a column mode preconcentration of uranium(VI) was carried out in the pH range 4.0-5.0, eluted with 1.0 mol l⁻¹ HCl and determined by an Arsenazo III spectrophotometric procedure. Calibration graphs were rectilinear over the uranium(VI) concentrations in the range 5-200 μg l⁻¹. Five replicate determinations of 25 μg of uranium(VI) present in 1 l solution gave a mean absorbance of 0.032 with a relative standard deviation of 2.52%. The detection limit corresponding to three times the standard deviation of the blank was found to be 5 μg l⁻¹. The accuracy of the developed preconcentration method in conjunction with the Arsenazo III procedure was tested by analysing MESS-3, a marine sediment certified reference material. Further, the above procedure has been successfully employed for analysis of uranium(VI) in soil and sediment samples.     

Amberlite XAD-4 functionalized with succinic acid for the solid phase extractive preconcentration and separation of uranium(VI)

Amberlite XAD-4 resin has been functionalized with succinic acid by coupling it with dibromosuccinic acid after acetylation. The resulting resin has been characterized by FT-IR, elemental analysis and TGA and has been used for preconcentrative separation of uranium(VI) from host of other inorganic species prior to its determination by spectrophotometry. The optimum pH value for quantitative sorption of uranium(VI) in both batch and column modes is 4.5-8.0 and desorption can be achieved by using 5.0 ml of 1.0 mol l⁻¹ HCl. The sorption capacity of functionalized resin is 12.3 mg g⁻¹. Calibration graphs were rectilinear over the uranium(VI) concentrations in the range 5-200 μg l⁻¹. Five replicate determinations of 50 μg of uranium(VI) present in 1000 ml of solution gave a mean absorbance of 0.10 with a relative standard deviation of 2.56%. The detection limit corresponding to three times the standard deviation of the blank was found to be 2 μg l⁻¹. Various cationic and anionic species at 200-fold amounts do not interfere during the preconcentration of 5.0 μg of uranium(VI) present in 1000 ml (batch) or 100 ml (column) of sample solution. Further, adsorption kinetic and isotherm studies were also carried out by a batch method to understand the nature of sorption of uranium(VI) with the succinic acid functionalized resin. The accuracy of the developed solid phase extractive preconcentration method in conjunction with Arsenazo III procedure was tested by analyzing marine sediment (MESS-3) and soil (IAEA soil-7) reference material. Further, the above procedure has been successfully employed for the analysis of soil and sediment samples.     

Removal, preconcentration and spectrophotometric determination of U(VI) from water samples using modified maghemite nanoparticles

Arsenazo III modified maghemite nanoparticles (A-MMNPs) was used for removing and preconcentration of U(VI) from aqueous samples. The effects of contact time, amount of adsorbent, pH and competitive ions was investigated. The experimental results were fitted to the Langmuir adsorption model in the studied concentration range of uranium (1.0 × 10^?4–1.0 × 10^?2 mol L^?1). According to the results obtained by Langmuir equation, the maximum adsorption capacity for the adsorption of U(VI) on A-MMNPs was 285 mg g^?1 at pH 7. The adsorbed uranium on the A-MMNPs was then desorbed by 0.5 mol L^?1 NaOH solution and determined spectrophotometrically. A preconcentration factor of 400 was achieved in this method. The calibration graph was linear in the range 0.04–2.4 ng mL^?1 (1.0 × 10^?10–1.0 × 10^?8 mol L^?1) of U(VI) with a correlation coefficient of 0.997. The detection limit of the method for determination of U(VI) was 0.01 ng mL^?1 and the relative standard deviation (R.S.D.) for the determination of 1.43 and 2.38 ng mL^?1 of U(VI) was 3.62% and 1.17% (n = 5), respectively. The method was applied to the determination of U(VI) in water samples.     

Synthesis of salicylaldehyde-modified mesoporous silica and its application as a new sorbent for separation, preconcentration and determination of uranium by inductively coupled plasma atomic emission spectrometry

A new functionalized mesoporous silica (MCM-41) using salicylaldehyde was utilized for the separation, preconcentration and determination of uranium in natural water by inductively coupled plasma atomic emission spectrometry (ICP-AES).Experimental conditions for effective adsorption of trace levels of U(VI) were optimized. The preconcentration factor was 100 (1.0 mL of elution for a 100 mL sample volume). The analytical curve was linear in the range 2-1000 μg L⁻¹ and the detection limit was 0.5 ng mL⁻¹. The relative standard deviation (R.S.D.) under optimum conditions was 2.5% (n = 10). Common coexisting ions did not interfere with the separation and determination of uranium at pH 5. The sorbent exhibited excellent stability and its sorption capacity under optimum conditions has been found to be 10 mg of uranium per gram of sorbent. The method was applied for the recovery and determination of uranium in different water samples.     

Sorption of uranium using silica gel with benzoylthiourea derivatives

Benzoylthiourea derivatives (N,N-diphenyl-N′-(3-methylbenzoyl)thiourea and diphenyl-N′-(4-methylbenzoyl)thiourea) were impregnated onto silica gel. The preconcentration of uranium(VI) from aqueous solution was investigated. Extraction conditions were optimized in batch method prior to determination by uv–visible absorption spectrometry using arsenazo(III). The optimum pH for quantitative adsorption was found as 3–7. Quantitative recovery of uranium (VI) was achieved by stripping with 0.1 mol L^?1 HCl. Equilibration time was determined as 30 min for 99% sorption of U(VI). Under optimal conditions, dynamic linear range of for U(VI) was found as 0.25–10 μg mL^?1. The relative standard deviation as percentage and detection limit were 5.0% (n = 10) for 10 μg mL^?1 U(VI) solution and 8.7 ng mL^?1, respectively. The method was employed to the preconcentration of U(VI) ions in soil and tap water samples.     

Further study of extraction equilibrium of uranium(VI) with dicyclohexano-18-crown-6 and its application to separating uranium and thorium

In our publication (1), the extraction of uranium with dicyclohexano-18-crown-6 (mixed isomers) has been described. The extraction equilibrium of uranium(VI) from aqueous hydrochloric acid solution with dicyclohexano-18-crown-6 isomer A (Ia) and isomer B (Ib) in 1,2-dichloroethane is presented in this paper. The extracted species are found to be 1:2 (metal/crown) for Ia and 2:3 for Ib from slope analysis and direct determination of extracted complexes. The extraction equilibrium constants (Kex) have been determined at 25°C, and equal 29.5 for the former and 0.208 for the latter. It is concluded that Ia has stronger coordinate ability for uranium than Ib. The different orientation of the lone pairs of the oxygen atoms in both isomers will be taken into account for interpreting above results. The extraction of uranium(VI) with dicyclohexano-18-crown-6 (mixed isomers) or Ia from aqueous hydrochloric acid solution is effective and selective. In 0.1M crown ether-1,2-dichloroethane-6N HCl system, the separation factor U(VI)/Th(IV) exceeds 1000. The result can be taken in separating uranium and thorium.     

Solid phase extraction and preconcentration of uranium(VI) and thorium(IV) on Duolite XAD761 prior to their inductively coupled plasma mass spectrometric determination

A simple and effective method is presented for the separation and preconcentration of thorium(IV) and uranium(VI) by solid phase extraction on Duolite XAD761 adsorption resin. Thorium(IV) and uranium(VI) 9-phenyl-3-fluorone chelates are formed and adsorbed onto the Duolite XAD761. Thorium(IV) and uranium(VI) are quantitatively eluted with 2 mol L⁻¹ HCl and determined by inductively coupled plasma-mass spectrometry (ICP-MS). The influences of analytical parameters including pH, amount of reagents, amount of Duolite XAD761 and sample volume, etc. were investigated on the recovery of analyte ions. The interference of a large number of anions and cations has been studied and the optimized conditions developed have been utilized for the trace determination of uranium and thorium. A preconcentration factor of 30 for uranium and thorium was achieved. The relative standard deviation (N = 10) was 2.3% for uranium and 4.5% for thorium ions for 10 replicate determinations in the solution containing 0.5 μg of uranium and thorium. The three sigma detection limits (N = 15) for thorium(IV) and uranium(VI) ions were found to be 4.5 and 6.3 ng L⁻¹, respectively. The developed solid phase extraction method was successively utilized for the determination of traces thorium(IV) and uranium(VI) in environmental samples by ICP-MS.     

Preconcentration and spectrophotometric determination of chromium(vi) in natural waters by coprecipitation with barium sulfate

A selective preconcentration of chromium(VI) is proposed for analysis of natural waters. Chromium(VI) is quantitatively separated from chromium(III) by coprecipitation with barium sulfate; salicylic acid is used as a masking agent for iron(III), aluminum(III) and chromium(III). The precipitate is fused with alkali carbonate, and the chromium(VI) in the melt is isolated with hot water and determined spectrophotometrically with diphenylcarbazide. The detection limit is 0.02 μg l^-1 the relative standard deviation for chromium(VI) in river water is less than 5%.     

Spectrophotometric determination of uranium(VI) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in a flow-injection system

The direct determination of uranium(VI) by a flow-injection procedure is based on spectrophotometric measurement with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in the present of fluoride. The interfering effects of many commonly occuring elements were studied. The calibration curve was linear over the range 0.5–20 mg 1^?1 uranium(VI). The relative standard deviation obtained on a leach liquor containing 10 mg 1^?1 uranium(VI) was 1.9%. The procedure is rapid and convenient, and up to 40 samples can be analysed per hour.     

Preconcentrative separation of chromium(VI) species from chromium(III) by coprecipitation of its ethyl xanthate complex onto naphthalene

A rapid, sensitive and selective method is described for the determination of chromium(VI) in presence of 100-fold amounts of chromium(III) by flame atomic absorption spectrometry (FAAS) in conjunction with coprecipitative preconcentration of its ethyl xanthate complex onto naphthalene. The solid mixture consisting of the chromium(VI) complex together with naphthalene is dissolved in 8.0 ml of dimethyl formamide (DMF) and chromium(VI) content was established by FAAS. Calibration graphs were rectilinear over the chromium(VI) concentration in the range 0-200 μg l⁻¹. Five replicate determinations of 20 μg of chromium(VI) present in 1.0 l of sample solution gave a relative standard deviation of 3.1%. The detection limit corresponding to three times the standard deviation of the blank was found to be 0.5 μg l⁻¹. The developed procedure has been successfully utilized for the estimation of chromium(VI), chromium(total) (after oxidation with bromate) and chromium(III) (by subtracting chromium(VI) content from chromium(total) value contents of several tannery industries.     

Determination of Ultra Trace Amounts of Uranium (VI) by Adsorptive Stripping Voltammetry Using L-3-(3, 4-dihydroxy phenyl) Alanine as a Selective Complexing Agent

Abstract

The spectrophotometric behavior of uranium (VI) with L-3-(3, 4-dihydroxy phenyl) alanine (LDOPA) reagent revealed that the uranium can form a ML₂ complex with LDOPA in solution. Thus a highly sensitive adsorptive stripping voltammetric protocol for measuring of trace uranium, in which the preconcentration was achieved by adsorption of the uranium-LDOPA complex at hanging mercury drop electrode (HMDE), is described. Optimal conditions were found to be a 0.02 M ammonium buffer (pH 9.5) containing 2.0 × 10^?5 M (LDOPA), an accumulation potential of ? 0.1 V (versus Ag/AgCl) and an accumulation time of 120 sec.

The peak current and concentration of uranium accorded with linear relationship in the range of 0.5–300 ng ml^?1. The relative standard deviation (at 10 ng ml^?1) is 3.6% and the detection limit is 0.27 ng ml^?1. The interference of some common ions was studied. Applicability to different real samples is illustrated. The attractive behavior of this reagent holds great promise for routine environmental and industrial monitoring of uranium.     

Adsorptive Stripping Voltammetric Determination of Trace Uranium with a Bismuth‐Film Electrode Based on the U(VI)→U(V) Reduction Step of the Uranium‐Cupferron Complex

This work reports the use of adsorptive stripping voltammetry (AdSV) for the determination of uranium on a preplated rotating‐disk bismuth‐film electrode (BiFE). The principle of the method relied on the complexation of U(VI) ions with cupferron and the subsequent adsorptive accumulation of the complex on the surface of the BiFE. The uranium in the accumulated complex was then reduced by means of a cathodic voltammetric scan while the analytically useful U(VI)→U(V) reduction signal was monitored. The experimental variables as well as potential interferences were investigated and the figures of merit of the method were established. Using the selected conditions, the 3σ limit of detection for uranium was 0.1 μg L^?1 at a preconcentration time of 480 s and the relative standard deviation was 4.7% at the 5 μg L^?1 level for a preconcentration time of 120 s (n=8). The accuracy of the method was established by analyzing a reference sea water sample.     

Solid phase extractive preconcentration of thorium onto 5,7-dichloroquinoline-8-ol modified benzophenone

The preparation of solid reagent 5,7-dichloroquinoline-8-ol modified benzophenone for preconcentration of thorium is described. The thorium-5,7-dichloroquinoline-8-ol complex is quantitatively retained on benzophenone in the pH range 6.0-6.5. The solid mixture consisting of the metal complex together with benzophenone is dissolved in 5 ml of acetone and thorium content was established spectrophotometrically by using Arsenazo III procedure. Calibration graphs are rectilinear over the thorium concentration range 0.001-0.2 mug ml(-1). Five replicate determinations of 20 mug of thorium present in 1 l of sample solution gave a mean absorbance of 0.320 with a relative standard deviation of 2.9%. The detection limit corresponding to three times the standard deviation of the blank was found to be 0.0005 mug ml(-1). The developed procedure has been successfully utilized for the estimation of thorium content of pure Rare earth chloride solution collected from Indian Rare Earths (IRE) Limited, Alwaye.     

Determination of molybdenum at μ l−1 levels by catalytic spectrophotometric flow injection analysis

A flow injection analytical method based on the catalytic action of molybdenum on the oxidation of iodide by hydrogen peroxide in acidic medium is proposed. The triiodide formed is measured spectrophotometrically at 350 nm. Molybdenum is determined in natural water samples without preconcentration at a sampling rate of 90 h^?1 with 200-μl sample injections. The detection limit is 0.7 μ l^?1 and the calibration curve is linear over the range 1–1000 μ l^?1. The relative standard deviation is 0.83% for 50 μ l^?1 molybdenum and 1.9% for 13 μ l^?1 molybdenum.     

Determination of Mo(VI) with 2-benzylideneiminobenzohydroxamic acid (2-BIBH) in urine by cathodic stripping voltammetry

Summary Controlled adsorptive accumulation of Mo(VI)-2-BIBH at the hanging mercury drop electrode (HMDE) provides the basis for the direct stripping measurement of Mo(VI) in nanomolar concentration. The cathodic stripping response is evaluated with respect to experimental parameters such as preconcentration time, preconcentration potential and others. A differential pulse cathodic stripping voltammetric method for the determination of Mo(VI) with 2-BIBH in urine is proposed. The detection limit is 10^–9 mol/l Mo(VI), standard deviation for 5×10^–8 mol/l is ±1.58×10^–9 mol/l.

---

Bestimmung von MolybdÄn(VI) mit 2-BenzylideniminobenzohydroxamsÄure (2-BIBH) in Harn durch kathodische Stripping-Voltammetrie

     

Development of method for determination and preconcentration of uranium in water samples using XAD-4 resin loaded with Br-PADAP

In the present work, a minicolumn of XAD-4 loaded with 2-(5-bromo-2-pyridylazo)-5-(diethylamino)-phenol (Br-PADAP) is proposed as a preconcentration system for uranium determination in well, tap and mineral water samples by spectrophotometer using arsenazo III as the chromogenic reagent. Initially, a two-level (2³) full factorial design was used for the preliminary evaluation of three factors, involving the following variables: sampling flow rate, elution flow rate, and pH. This design has revealed that, for the studied levels, buffer concentration and pH were significant factors. When the experimental conditions established in the optimization step were pH = 8.6, and an elution flow rate of 8.6 mL min^?1 using 0.5% m/v ascorbic acid, this system has allowed for the determination of uranium with a detection limit (LOD) (3σ/S) of 0.05 μg L^?1 and a quantification limit (LOQ) (10σ/S) of 0.16 μg L^?1. The precision expressed as the relative standard deviation (R.S.D.) of 0.8% and 1.9% at 10.0 and 1.0 μg L^?1, respectively- and a preconcentration factor of 184.5 for a sample volume of 50.0 mL. Accuracy was confirmed by uranium determination in the standard reference material, NIST SRM 1566b trace element units in Oyster Tissue samples, and spike tests with recuperations ranging from 93.2 to 105%; the procedure were applied for uranium determination in tap water, well water, and drinking water samples collected from Caetité and Cruz das Almas Cities, Bahia, Brazil. Five water samples were analyzed the uranium concentrations varied from 0.50 to 2.07 μg L^?1     

Preconcentration of trace uranium from seawater with solid phase extraction followed by differential pulse polarographic determination in chloroform eluate

In the present study, an effective method is presented for the separation and preconcentration of uranium (VI) by solid phase extraction (SPE). For this purpose, U(VI) oxinate is formed by the reaction of U(VI) with 8-hydroxyquinoline and adsorbed onto the octylsilane (C-8) SPE cartridge. The analyte is completely eluted with chloroform and determined by differential pulse polarography. The SPE conditions were optimized by evaluating the effective factors such as pH, oxine concentration, type and concentration of buffer and masking agent. By the proposed method a preconcentration factor more than 100 was achieved. The average recovery of uranium (VI) oxinate (0.1 mg l(-1)) was 99.8%. The relative standard deviation was 1.6% for seven replicate determinations of uranyl ion in the solution with a concentration 20 mug l(-1). Some concomitant ions such as Ca(+2), Mg(+2) and Fe(+3) which interfere in extraction or determination process of uranium were masked with EDTA in aqueous phase during the extraction process. The proposed method was successfully used for the determination of uranium in Caspian Sea and Persian Gulf water samples.     

Solid Phase Extraction of Uranium by Naphthalene‐Methyltrioctylammonium Chloride and Arsenazo(III) Adsorbent and Subsequent Spectrophotometric Determination

A simple and effective method has been presented for the preconcentration of uranium by solid phase extraction. For this purpose arsenazo(III) supported on naphthalene‐methyltrioctylammonium chloride was used as an adsorbent and uranium solution at pH 3.5 with flow rate of 1 mL·min⁻¹ was passed through the column. Therefore, uranium‐arsenazo(III) complex was formed onto column. Uranium was quantitatively eluted with 5 mL of a 0.1% ammonium tetraphenylborate and determined by spectrophotometric method at 652 nm. Several parameters such as pH, amount of reagents, sample volume, etc. were investigated. The effect of diverse ions on the preconcentration has also been studied and the optimized conditions developed have been utilized for the trace determination of uranium. A preconcentration factor of 100 was achieved. The relative standard deviation (N=8) was 0.5% for 3 ng· mL⁻¹ of uranium. The three sigma detection limit (36) was 0.045 ng·mL⁻¹     

<Emphasis Type="Italic">p</Emphasis>-<Emphasis Type="Italic">tert</Emphasis>-Butylcalix[8]arene loaded silica gel for preconcentration of uranium(VI) via solid phase extraction

This paper reports silica gel loaded with p-tert-butylcalix[8]arene as a new solid phase extractor for determination of trace level of uranium. Effective extraction conditions were optimized in column methods prior to determination by spectrophotometry using arsenazo(III). The results showed that U(VI) ions can be sorbed at pH 6 in a mini-column and quantitative recovery of U(VI) (>95–98%) was achieved by stripping 0.4 mol L⁻¹ HCl. The sorption capacity of the functionalized sorbent is 0.072 mmol uranium(VI) g⁻¹ modified silica gel. The relative standard deviation and detection limit were 1.2% (n = 10) for 1 μg uranium(VI) mL⁻¹ solution and 0.038 μg L⁻¹, respectively. The method was employed to the preconcentration of U(VI) ions from spiked ground water samples.     

Use of pyrocatechol violet modified sodium dodecyl sulfate coated on alumina for separation and preconcentration of uranium(VI)

A sensitive and selective solid phase extraction procedure for the determination of trace of uranium(VI) has been developed. An alumina-sodium dodecyl sulfate coated on with pyrocatechol violet was used for preconcentration and determination of uranyl ions by spectrophotometry method using Arsenazo III reagent. Sorbed ions were quantitatively eluted using 5 mL of 0.25 mol L⁻¹ HNO₃. The effects of parameters such as pH, amount of alumina, amount of ligand, flow rate, type and concentration of elution agent were examined. The capacity of the sorbent for U(VI) was found to be 0.92 mmol g⁻¹. The relative standard deviation was 1.28% for 10 replicate determinations of U(VI) ion in a solution with a concentration of 1.0 μg mL⁻¹. The practical applicability of the developed sorbent was examined using synthetic and real samples such as standard reference material 2709 (San Joaquin Soil) and 2711 (Montana Soil).