Microstructure and magnetic characterization of the Sm-CoMn co-substituted SrCaM hexagonal ferrites

A series of Sm-CoMn substituted hexagonal ferrites with chemical composition of Sr_0.85-xCa_0.15Sm_xFe_12-y(Co_0.5Mn_0.5)_yO₁₉ (0.00?≤?x?≤?0.60, (0.00?≤?y?≤?0.50) were synthesized by the solid-state reaction method. Microstructure and magnetic properties of the hexaferrites have been investigated by the X-ray diffraction, field emission scanning electron microscopy and a permanent magnetic measuring system. A single magnetoplumbite phase is exhibited in the hexaferrites with the substitutiom of Sm (0.00?≤?x?≤?0.12) and CoMn (0.00?≤?y?≤?0.10) contents. For the hexaferrites containing Sm (x?≥?0.24) and CoMn (y?≥?0.20), impurity phases are observed in the structure. The FESEM micrographs exhibit that the hexaferrites with different Sm-CoMn contents have formed hexagonal structures and the grain size of the hexaferrites remains unchanged with increasing Sm-CoMn content. The remanence (B_r), H_k/H_cj ratios, and maximum energy product [(BH)_max] decrease with increasing Sm-CoMn content (0.00?≤?x?≤?0.60, (0.00?≤?y?≤?0.50). Instrinsic coercivity (H_cj) and magnetic induction coercivity (H_cb) increase with increasing Sm-CoMn content (0.00?≤?x?≤?0.12, 0.00?≤?y?≤?0.10), and then decrease with increasing Sm-CoMn content (0.12?≤?x?≤?0.36, 0.10?≤?y?≤?0.30), while for the hexaferrites with Sm (x?≥?0.36) and CoMn (y?≥?0.30), with increasing Sm-CoMn content, H_cj increases and H_cb decreases.     

Investigating the influence of Cr-Zn substitution on magnetic and structural properties of M-type SrBaSm hexaferrites Sr0.6Ba0.1Sm0.3Fe12.0-x(Cr0.6Zn0.4)xO19

The Cr-Zn substituted M-type SrBaSm hexaferrites Sr_0.6Ba_0.1Sm_0.3Fe_12.0-x(Cr_0.6Zn_0.4)_xO₁₉ (0.00?≤?x?≤?0.75) were synthesized by the conventional ceramic route. The crystal structures were identified by X-ray diffraction. XRD analysis showed that the magnetic powders with CrZn content (x) from 0.00 to 0.30 had M-type as major phase and α-Fe₂O₃ as impurity phase, while the magnetic powders with CrZn content (x)?≥?0.45 exhibited a single M-type phase. The grain morphology of the magnets was observed by a field emission scanning electron microscopy (FE-SEM). The FE-SEM images show that all grains were distributed homogeneously and had regular hexagonal platelet-like shape. The magnetic properties of the magnets were derived from the demagnetizing curves. The remanence (B_r) and maximum energy product [(BH)_max] first increased with increasing CrZn content (x) from 0.00 to 0.30, and then decreased when CrZn content (x)?≥?0.30. The intrinsic coercivity (H_cj) and magnetic induction coercivity (H_cb) first decreased with increasing CrZn content (x) from 0.00 to 0.30, and then slightly fluctuated and basically remained unchanged when CrZn content (x) ≥ 0.30.     

Effects of Pr-Al co-substitution on the magnetic and structural properties of M-type Ca-Sr hexaferrites

In this research, a series of Pr-Al co-substituted M-type hexaferrites with the chemical composition of Ca_0.4Sr_0.6-xPr_xFe_12.0-yAl_yO₁₉ (0.00 ≤ x ≤ 0.40, 0.00 ≤ y ≤ 0.60) were synthesized by the standard ceramic method. The phase identification of the samples was confirmed by X-ray diffraction analysis. A single magnetoplumbite phase is exhibited in the hexaferrites with the substitutiom of Pr (0.00 ≤ x ≤ 0.32) and Al (0.00 ≤ y ≤ 0.48) contents. For the hexaferrite containing Pr (x = 0.40) and Al (y = 0.60), an impurity phase α-Fe₂O₃ is observed in the structure. The morphology of the hexaferrites was analyzed by field emission scanning electron microscopy (FE-SEM). FE-SEM micrographs show that the hexaferrites with different Pr-Al contents have formed hexagonal structures, and the grain size of the magnets decreases with increasing Pr-Al content. A magnetic property measurement system was used to measure the magnetic properties of the hexaferrites. The remanence (B_r) and maximum energy product [(BH)_max] decrease with increasing Pr-Al content (0.00 ≤ x ≤ 0.40, (0.00 ≤ y ≤ 0.60). The intrinsic coercivity (H_cj) increases with increasing Pr-Al content (0.00 ≤ x ≤ 0.40, (0.00 ≤ y ≤ 0.60). The magnetic induction coercivity (H_cb) and H_k/H_cj ratio first increase with increasing Pr-Al content (0.00 ≤ x ≤ 0.24, 0.00 ≤ y ≤ 0.36) and then decrease with increasing Pr-Al content (0.24 ≤ x ≤ 0.40, 0.36 ≤ y ≤ 0.60).     

An investigation on microstructural,spectral and magnetic properties of Pr–Cu double-substituted M-type Ba–Sr hexaferrites

This is first report on Pr–Cu double-substituted M-type Ba–Sr hexaferrites with nominal compositions Ba_0.3Sr_0.7−xPr_xFe_12.0−xCu_xO₁₉ (x = 0.00–0.35) fabricated by the solid-state reaction route. X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FE-SEM) and Hysteresis graph meter were used to characterize the synthesized M-type Ba–Sr hexaferrites. XRD results show that the hexaferrites with x ≤ 0.21 exhibited single M-type phase, while the hexaferrites with x ≥ 0.28 exhibited the M-type phase and impurity phases. FE-SEM images proposed that all particles with hexagonal platelet-like shape were homogeneously dispersed. The remanence (B_r) first increased with Pr–Cu content (x) from 0.00 to 0.14, and then decreased when x ≥ 0.14. The intrinsic coercivity (H_cj) and magnetic induction coercivity (H_cb) first decreased with x from 0.00 to 0.14, and then increased when x ≥ 0.14. Maximum energy product [(BH)_max] reached the maximum value at x = 0.14.     

Magnetic and microstructural properties of M-type strontium hexaferrites with Pr–ZnAl substitution

We have investigated the influence of Pr–ZnAl substitution on the magnetic and microstructural properties of M-type strontium hexaferrites Sr_1.0-xPr_xFe_12.0-x(Zn_0.5Al_0.5)_xO₁₉ (0.0 ≤ x ≤ 0.5) synthesized by the standard ceramic method. X-ray diffraction (XRD) was carried out to determine the crystal structure and the phase identification of the hexaferrites showed that a single magnetoplumbite phase was exhibited in the hexaferrites with Pr–ZnAl content (x) from 0.0 to 0.4 and impurity phase α-Fe₂O₃ was observed in the structure when Pr–ZnAl content (x)?=?0.5. The morphology of the hexaferrites was analyzed by a field emission scanning electron microscopy (FE-SEM). The representative FE-SEM micrographs showed that the particles were regular hexagonal platelets and the average grain size basically kept unchanged with increasing Pr–ZnAl content (x). A magnetic property measurement system was used to measure the magnetic properties of the hexaferrites. The remanence (B_r), maximum energy product [(BH)_max] and H_k/H_cj ratio decreased with increasing Pr–ZnAl content (x) from 0.0 to 0.5. The intrinsic coercivity (H_cj) and magnetic induction coercivity (H_cb) first increased with increasing Pr–ZnAl content (x) from 0.0 to 0.1, and decreased with increasing Pr–ZnAl content (x) from 0.1 to 0.2, and then increased when Pr–ZnAl content (x) ≥ 0.2.     

The tunable magnetic properties and microstructures of Co–Ni double-substituted M-type Casrla hexaferrites

M-type hexaferrites with Co²⁺ and Ni²⁺ions substituting for Fe³⁺ ions (Ca_0.30Sr_0.35La_0.35Fe_12.0−x(Co_0.5Ni_0.5)_xO₁₉, 0.0 ≤ x ≤ 1.0) were prepared by the traditional solid state method. X-ray diffractometer (XRD), field emission scanning electron microscopy (FE-SEM), physical property measurement system-vibrating sample magnetometer (PPMS-VSM) have been employed to study the microstructures and magnetic properties of hexaferrites. XRD patterns showed that the single magnetoplumbite phase is obtained if Co–Ni content (x) ≤ 0.4 and impurity phases are observed in the structure when Co–Ni content (x) ≥ 0.4. FE-SEM micrographs showed that the hexaferrites with hexagonal platelet-like grains is obtained. The saturation magnetization (M_s), remanent magnetization (M_r), M_r/M_s ratio, magneton number (n_B), coercivity (H_c), magnetic anisotropy field (H_a) and first anisotropy constant (K₁) decrease with increasing Co–Ni content (x) from 0.0 to 1.0. And our reported results with tunable H_c and M_r can be used for recording applications.     

Magnetic and Microwave Absorbing Properties of Electrospun Ba(1−x)LaxFe12O19 Nanofibers

Ba_(1−x)La_xFe₁₂O₁₉ (0.00≤x≤0.10) nanofibers were fabricated via the electrospinning technique followed by heat treatment at different temperatures for 2 h. Various characterization methods including scanning electron microscopy (SEM), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and microwave vector network analyzer were employed to investigate the morphologies, crystalline phases, magnetic properties, and complex electromagnetic parameters of nanofibers. The SEM images indicate that samples with various values of x are of a continuous fiber-like morphology with an average diameter of 110±20 nm. The XRD patterns show that the main phase is M-type barium hexaferrite without other impurity phases when calcined at 1100 °C. The VSM results show that coercive force (H_c) decreases first and then increases, while saturation magnetization (M_s) reveals an increase at first and then decreases with La³⁺ ions content increase. Both the magnetic and dielectric losses are significantly enhanced by partial substitution of La³⁺ for Ba²⁺ in the M-type barium hexaferrites. The microwave absorption performance of Ba_0.95La_0.05Fe₁₂O₁₉ nanofibers gets significant improvement: The bandwidth below −10 dB expands from 0 GHz to 12.6 GHz, and the peak value of reflection loss decreases from −9.65 dB to −23.02 dB with the layer thickness of 2.0 mm.     

Improving magnetic properties of barium hexaferrites by La or Pr substitution

La or Pr substituted barium hexaferrites, Ba_1−x(La or Pr)_xFe₁₂O₁₉, x=0.00-0.20, were successfully prepared by a citrate combustion process. The sintered bodies were structurally and magnetically studied by powder X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). All XRD patterns show the single phase of the magnetoplumbite barium ferrite without other intermediate phases. Magnetization (M_S) and coercive field (H_C) could be improved by substitutions of La or Pr ions on Ba ion basis sites. The M_S reveal magnetic behavior with respect to La or Pr ions content, showing an increase at first and then a decrease. The H_C increases remarkably with increasing La or Pr ions content.     

Magnetic characterization of Ca substituted Ba and Sr hexaferrites

A magnetic characterization has been worked out for the solid solution from Ba and Sr hexaferrites (BaFe_{1 2}O_{1 9}, SrFe_{1 2}O_{1 9}) towards CaO-xFe₂O₃ (2 ? x ?5.5). Measurements of Curie temperature, saturation magnetization, magnetic anisotropy, together with Mössbauer characterization indicate that the intrinsic properties of the studied compounds do not change appreciably with increasing Ca content. These results, together with the X-ray data, are consistent with the formation of an undistorted M-type cell with a low content of iron and oxygen vacancies.     

The effect of Gd3+ and Cd2+ substitution on magnetization of copper ferrite

Polycrystalline compositions of soft ferrite system, Cd_xCu_1−xFe_2−yGd_yO₄ (X=0.00, 0.20, 0.40, 0.60, 0.80 and 1.00; y=0.00, 0.10 and 0.30) were prepared by standard ceramic method. X-ray diffraction study show formation of single phase cubic spinel ferrite for the compositions X⩾0.20 and tetragonal nature for compositions X=0.00, for all values of Gd³⁺ (y=0.00, 0.10 and 0.30) concentration. Saturation magnetization and magnetic moments were found to be increasing with cadmium concentration up to X=0.40, for all values of Gd³⁺ content, obeying Neel's two sublattice model and decreases thereafter, showing existence of non-collinear spin interaction. The Gd³⁺ substitution results into reaction in the magnetic moments. This is due to occupancy of Gd³⁺ ion on octahedral (B) site, resulting into dilution in the magnetization of B sublattices. The Curie temperatures for all compositions are found to be decreasing with substitution of Cd²⁺ concentration. This is attributed to the occupancy of cadmium on tetrahedral (A) site, causing dilution in the inter site magnetic interaction. The temperature dependence of AC susceptibility is also studied and its behaviour is explained on the basis of domain structure.     

Microstructural and magnetic properties of Pr–BiCo co-substituted M-type Sr–Ca hexaferrites

We have synthesized the Pr–BiCo substituted hexaferrites with compositions of Sr_0.8-xCa_0.2Pr_xFe_12.0-x(Bi_0.5Co_0.5)_xO₁₉ (0.0?≤?x?≤?0.5) by the standard ceramic method. Results of X-ray diffraction analysis exhibits that the synthesized hexaferrites with x from 0.0 to 0.3 are in single magetoplumbite structure, and impurity phases are observed when x?≥?0.4. The surface morphology of magnets shows that hexaferrite grains have a hexagonal platelet shape with clear grain boundaries. The remanence first increases with x from 0.0 to 0.1, and then decreases when x?≥?0.1. The intrinsic coercivity decreases with x from 0.0 to 0.1, and then increases when x?≥?0.1. With x from 0.0 to 0.4, the changing trend of magnetic induction coercivity is in agreement with that of H_cj, while at x?≥?0.4, H_cb decreases. The maximum energy product initially increases with x from 0.0 to 0.2, and then decreases when x?≥?0.2.     

Synthesis and the magnetic characterization of iridium–cobalt substituted calcium hexaferrites

M-type hexagonal ferrite powder with partial substitution lr⁴⁺+Co²⁺ has been synthesized by chemical-coprecipitation technique. The saturation magnetization M_s decreases linearly from 69.8 to 40.3 emu/g with increasing doping content from 0.5 to 1. The Coerecivity sharply drops for x=0.5, which can be explained by the decrease of the anisotropy constant K₁ Curie temperature T_c decreases linearly with increasing ‘x’. Crystallographic studies were explained on the cation distribution consistent with Gorter spin model of parallel alignment.     

Magnetic properties of the Pr1−xGdxCo4B compounds

In this work, we have investigated the effect of the substitution of Gd for Pr on the crystal structure and magnetic properties of the Pr_1−xGd_xCo₄B compounds for 0?x?1 using X-ray powder diffraction, magnetic measurements, and differential scanning calorimetry (DSC). These compounds have hexagonal CeCo₄B-type structure with the space group P6/mmm. The substitution of Gd for Pr leads to a decrease of the unit-cell parameters a and the unit-cell volume V, while the unit-cell parameter c increases slightly. Magnetic measurements indicate that all samples are ordered magnetically below room temperature. The Curie temperatures determined by DSC technique increase as Pr is substituted by Gd. The saturation magnetization at 5 K decreases upon Gd substitution up to x=0.6, and then increases again.     

Magnetocaloric properties in the Cr-doped La0.7Sr0.3MnO3 manganites

Single-phase polycrystalline samples of La_0.7Sr_0.3Mn_1-xCr_xO₃ with nominal composition of x=0.00, 0.20, 0.40 and 0.50 were prepared by a conventional solid-state reaction method in air. Investigations of magnetization were carried out in the temperature range 5-400 K and magnetic field range 0-8 T. It was found that the Curie temperature T_C decreases with increasing x and the maximum magnetic entropy change (−ΔS_M) for x=0.20 is ∼1.203 and ∼2.653 J/kg K, respectively for 2 and 6 T magnetic field near the temperature of 280 K.     

Magnetic properties of La-Co substituted M-type strontium hexaferrites prepared by polymerizable complex method

Magnetic properties of La-Co substituted M-type strontium hexaferrites were studied. The samples were prepared by polymerizable complex method. Crystal structure of samples has been investigated by powder X-ray diffraction (XRD). Single-phase M-type strontium hexaferrites with chemical composition of Sr_1.05−xLa_xFe_12−xCo_xO₁₉ (x=0-0.4) were formed by heating at 1173 K for 24 h in air. Magnetic properties were discussed by measurements of M-H curves with vibrating sample magnetometer (VSM). La-Co substituted M-type strontium hexaferrites prepared by polymerizable complex method showed typical magnetic hysteresis of hard ferrite. The coercive force increased significantly by La-Co substitution with polymerizable complex method. Maximum coercive force achieved in this study is 8.0 kOe (640 kA/m). Scanning electron microscopy revealed that the prepared ferrite particles have plate-like shape of diameter range between 20 and 500 nm.     

The influence of Nd-Co substitution on the magnetic properties of non-stoichiometric strontium hexaferrite nanoparticles

Non-stoichiometric Nd-Co substituted hexaferrites of composition Sr_1−xNd_xFe_12(1−x)Co_xO₁₉ (x=0-0.4) were prepared by the self-propagating combustion method and subsequent heat treatments. Structural characterization of samples showed that the M-type hexagonal structure can be maintained for substitutions x<0.4 without the segregation of secondary phases on samples calcined at 1100 °C. The crystallites sizes range between 50 and 70 nm. Mössbauer spectroscopy results indicate that the iron vacancies are not evenly distributed over the lattice and that Co/Fe substitution mainly takes place in site 4f2. Magnetic measurements reveal that values of saturation magnetization M_S increased from 72 to 76 Am²/kg (x=0-0.2), while coercivity H_c increased from 26.40 to 58.70 A/m (x=0-0.3). Nd-Co substitutions enhance magnetic properties in deficient iron Sr hexaferrites.     

Structural and magnetic properties of ferromagnetic In1−xMnxAs1−yPy layers

The structural and magnetic properties of epitaxial In_1−xMn_xAs_1−yP_y quaternary layers with Mn content ranging from 0.01 to 0.04 and phosphorous content ranging from 0.11 to 0.21 were studied. X-ray diffraction indicated that the films were two phase consisting of an InMnAsP solid solution and hexagonal MnAs nanoprecipitates. Addition of phosphorus promoted precipitate formation. Films were ferromagnetic showing hysteretic behavior in the field dependence of magnetization at 5 and 298 K. From field-cooled magnetization measurements ferromagnetic transitions were observed at 280 and 325 K. The zero field-cooled magnetization versus temperature measurements showed irreversibility for T<300 K that was attributed to the presence of MnAs nanoprecipitates. The calculated coercivity using the Neel model was 1380 G compared to the experimental value of 380 G at 5 K. The difference was attributed to a strong inter-cluster exchange that stabilizes the ferromagnetic state.     

Synthesis and characterization of Sr(ZnZr)x Fe12−2xO19-PANI composites

Strontium zinc zirconium hexaferrites/polyaniline (Sr(ZnZr)_xFe_12−2xO₁₉-PANI, x=0, 0.5, 1.0) composites were synthesized by oxidative chemical polymerization of aniline in the presence of ammonium peroxydisulfate (APS). The structure and morphology of the product was characterized by FTIR, TGA and SEM. The particle size of the core material was found to be about 250-500 nm. After coating with polyaniline, the particle size of Sr(ZnZr)_0.5Fe₁₁O₁₉-PANI composites grew upto 0.5-1.0 μm. XRD of the ferrites indicated that the structure of the core materials is hexagonal, with lattice constants around 5.886-5.885 Å. It was found that the saturation magnetization (M_S) and coercivity (H_C) for Sr(ZnZr)_xFe_12−2xO₁₉-PANI composites decreased after polyaniline coating. The composite under applied magnetic field, exhibited ferromagnetic hysteretic loops with high saturation magnetization (M_S=18.9-3.8 emu/g) and coercivity (H_C=3850.0-583.91 Oe).     

A magnetic, magnetostrictive and Mössbauer study of Tb0.3Dy0.7−xPrx(Fe0.9Al0.1)1.95 alloys

The effect of Pr substitution for Dy on the magnetization, magnetostriction, anisotropy and spin reorientation of a series of Tb_0.3Dy_0.7−xPr_x(Fe_0.9Al_0.1)_1.95 alloys (x=0, 0.1, 0.20, 0.25, 0.30, 0.35) at room temperature has been investigated. It was found that the magnetization and magnetostriction of the homogenized Tb_0.3Dy_0.7−xPr_x(Fe_0.9Al_0.1)_1.95 alloys decreases drastically with increasing x and the magnetostrictive effect disappears for x>0.2, but the spontaneous magnetostriction λ₁₁₁ increases approximately linearly with increasing x. Moreover, the magnetostriction exhibits slightly bigger value at x=0.1 than the free alloys and is saturated more easily with the magnetic field H, showing that a small amount of Pr substitution is beneficial to a decrease in the magnetocrystalline anisotropy. The analysis of the Mössbauer spectra indicated that the easy magnetization direction in the {1 1 0} plane deviates slightly from the main axis of symmetry with Pr concentration x, namely spin reorientation. Comparing with the Al substitution, the effect of Pr substitution for Dy on the spin reorientation is smaller.     

Multiferroic properties and structural features of <Emphasis Type="Italic">M</Emphasis>-type Al-substituted barium hexaferrites

Precise studies of the crystal and magnetic structures of M-type substituted barium hexaferrites BaFe_12–x Al _x O₁₉ (0.1 ≤ x ≤ 1.2) have been performed by powder neutron diffraction in the temperature range 300–730 K. The electric polarization and the magnetization, and also the magnetoelectric effect of the compositions under study have been studied in electric (to 110 kV/m) and magnetic (to 14 T) fields at room temperature. The spontaneous polarization and significant correlation between the dielectric and magnetic subsystems have been observed at room temperature. The magnetoelectric effect value is, on average, about 5%, and it increases slightly with the aluminum cation concentration. The precise structural studies made it possible to reveal the cause and the mechanism of formation of the spontaneous polarization in M-type substituted barium hexaferrites BaFe_12–x Al _x O₁₉ (x ≤ 1.2) with a collinear ferromagnetic structure.