MOCVD法生长Ga、P掺杂的ZnO薄膜

采用金属有机化学气相沉积法在蓝宝石衬底上制备Ga、P掺杂的ZnO薄膜,分别采用X射线衍射、扫描电子显微镜、霍尔效应测试、光致发光谱对样品进行表征。通过Ga、P掺杂分别得到n、p型ZnO薄膜,n型ZnO薄膜的载流子浓度可以达到1×1019cm-3,p型ZnO薄膜的载流子浓度达到1.66×1016cm-3。所制备的ZnO薄膜具有c轴择优生长取向,并且p型ZnO薄膜具有较好的光致发光特性。     

Low temperature synthesis wide optical band gap Al and (Al, Na) co-doped ZnO thin films

Al-doped ZnO (AZO) and (Al, Na) co-doped ZnO (ANZO) thin films were prepared via sol-gel technique with an annealing process at temperatures between 450 and 550 °C for 60 min in air ambient, and their structural and optical properties have been investigated. The deposited films exhibited hexagonal zinc oxide structure except annealing at 450 °C. For the 500 °C-annealed samples, the surface morphology was analyzed via scanning electron microscopy, Photoluminescence (PL) of different Na content ANZO thin films showed that there were very obvious violet and blue emission bands between 400 and 500 nm, and intensity of which were enhanced with Na content increasing. Transparency of the films was improved along with increasing Na content. The result of UV indicated the absorb bands appeared obviously red shift with Na doping into ZnO, the optical gaps of all films far beyond 3.37 eV of pure ZnO, and gradually decreased with Na content increasing, this is very virtual for improving photoelectricity performance of transparent conduct oxide (TCO) film. The possible origins responsible for structure and optical properties also had been discussed.     

Optical properties of ZnO and ZnO:Ce layers grown by spray pyrolysis

In this paper, zinc oxide (ZnO) and cerium-doped zinc oxide (ZnO:Ce) films were deposited by reactive chemical pulverization spray pyrolysis technique using zinc and cerium chlorides as precursors. The effects of Ce concentration on the structural and optical properties of ZnO thin films were investigated in detail. These films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL) measurements. All deposited ZnO layers at the temperature 450 °C are polycrystalline and indicate highly c-axis oriented structure. The dimension of crystallites depends on incorporation of Ce atoms into the ZnO films. The photoluminescence spectra of the films have been studied as a function of the deposition parameters such as doping concentrations and post grows annealing. Photoluminescence spectra were measured at the temperature range from 13 K to 320 K.     

Structure distortion, optical and electrical properties of ZnO thin films co-doped with Al and Sb by so--gel spin coating

ZnO thin films co-doped with Al and Sb with different concentrations and a fixed molar ratio of AlCl₃ to SbCl₃ at 1:2, are prepared by a sol--gel spin-coating method on glass annealed at 550 ℃ for 2 h in air. The x-ray diffraction results confirm that the ZnO thin films co-doped with Al and Sb are of wurtzite hexagonal ZnO with a very small distortion, and the biaxial stresses are 1.03×10⁸, 3.26×10⁸, 5.23×10⁸, and 6.97×10⁸ Pa, corresponding to those of the ZnO thin films co-doped with Al and Sb in concentrations of 1.5, 3.0, 4.5, 6.0 at% respectively. The optical properties reveal that the ZnO thin films co-doped with Al and Sb have obviously enhanced transmittance in the visible region. The electrical properties show that ZnO thin film co-doped with Al and Sb in a concentration of 1.5 at% has a lowest resistivity of 2.5Ω·cm.     

Temperature-dependent luminescence dynamics for ZnO thin films

The paper presents the photoluminescence investigation of zinc oxide thin films. A high quality ZnO films fabricated by dip-coating (sol–gel) method were grown on quartz wafers. The films with different thickness (number of layers) were annealed at different temperatures after the preparation process. It was found that high quality, transparent ZnO thin films could be produced on quartz substrates at relatively low annealing temperature (450–550  $^{\circ }\mathrm{C}$ ). The dependence of the ZnO thin film quality was studied by X-ray diffraction and atomic force microscopy techniques. Optical properties were investigated by classic and time-resolved photoluminescence (TRPL) measurements. Photoluminescence spectra allowed us to estimate energy of the free excitons, bond excitons and their longitudinal optical (LO) phonon replicas as a function of the annealing temperature. An innovative TRPL technique let us precisely measure the decay time of the free- and bond excitons’ in the real time. TRPL measurements as a function of temperature reveal a biexponential decay behavior with typical free/bound exciton decay constants of 970/5310 ps for the as-grown sample and 1380/5980 ps after annealing process. Presented spectra confirm high structural and optical quality of investigated films. We proved that the thermal treatment improve both optical and structural quality and extend the photoluminescence’s lifetimes. The obtained experimental results are important for identification of exciton’s peaks and their LO phonon replicas for the investigated ZnO films.     

氧压对飞秒激光沉积ZnO/Si(100)薄膜光学性能的影响

利用飞秒脉冲激光沉积法在n-Si（100）单晶衬底上制备了ZnO薄膜, 分析了衬底温度、激光能量、氧压及退火处理对薄膜结构和光学性能的影响. X射线衍射结果表明, 当激光能量为15?mJ、氧压为10?mPa时, 80?℃生长的薄膜取向性最好. 场扫描电子显微镜结果显示薄膜的晶粒尺寸随激光能量的增加而减小、随衬底温度的升高而增大且退火后明显变大. 紫外-可见透射光谱显示薄膜具有90%以上的可见光透过率.光致发光谱表明当氧压为10 mPa时,除了ZnO的紫外本征峰外, 还有一波长为410 nm的强紫光峰, 当氧压增至20 mPa以上, 所有缺陷峰均消失, 只有376 nm处的紫外本征峰. 与纳秒激光法所制备的薄膜特性进行了比较, 结果表明, 虽然纳秒激光沉积所制备的薄膜具有更高的c轴取向度, 但飞秒激光沉积制备的薄膜具有更好的发光性能. 关键词： 氧化锌 飞秒脉冲激光沉积 透过率 光致发光     

Structural and optical properties of sputtered ZnO thin films

Zinc oxide (ZnO) and aluminium-doped zinc oxide (ZnO:Al) thin films were prepared by RF diode sputtering at varying deposition conditions. The effects of negative bias voltage and RF power on structural and optical properties were investigated. X-ray diffraction measurements (XRD) confirmed that both un-doped and Al-doped ZnO films are polycrystalline and have hexagonal wurtzite structure. The preferential 〈0 0 1〉 orientation and surface roughness evaluated by AFM measurements showed dependence on applied bias voltage and RF power. The sputtered ZnO and ZnO:Al films had high optical transmittance (>90%) in the wavelength range of 400-800 nm, which was not influenced by bias voltage and RF power. ZnO:Al were conductive and highly transparent. Optical band gap of un-doped and Al-doped ZnO thin films depended on negative bias and RF power and in both cases showed tendency to narrowing.     

Structure,composition and optical properties of ZnO:Ga films electrodeposited on flexible substrates

Thin films of ZnO:Ga are electrodeposited on stainless steel from zinc chloride solutions containing gallium with a Ga/Zn molar ratio in the range 1–10%. The surface morphology, structure, composition, and the optical properties of these films are studied using SEM, XRD, EDX, XPS, photoluminescence and transmittance spectroscopy. Results reveal that films with embedded platelets can be grown with a Ga/Zn molar ratio up to 60%. In as-grown films, Ga is present in the form of oxide, hydroxide or hydroxychloride compounds which decompose by annealing. Films annealed at 400°C are composed only from ZnO and Ga₂O₃ phases. The incorporation of Ga in ZnO films does not make a considerable change in the optical transmittance and the photoluminescence properties of the films.     

Structural,electrical and optical studies on spray-deposited aluminium-doped ZnO thin films

Thin films of zinc oxide (ZnO) were deposited on cleaned glass substrates by chemical spray pyrolysis technique using Zn(CH₃COO)₂ as precursor solution. Also, aluminium-doped thin films of ZnO were prepared by using AlCl₃ as doping solution for aluminium. The dopant concentration [Al/Zn atomic percentage (at%)] was varied from 0 to 1.5 at% in thin films of ZnO prepared in different depositions. Structural characterization of the deposited films was performed with X-ray diffraction (XRD) studies. It confirmed that all the films were of zinc oxide having polycrystalline nature and possessing typical hexagonal wurtzite structure with crystallite size varying between 100.7 and 268.6 nm. The films exhibited changes in relative intensities and crystallite size with changes in the doping concentration of Al. The electrical studies established that 1 at% of Al-doping was the optimum for enhancing electrical conduction in ZnO thin films and beyond that the distortion caused in the lattice lowered the conductivity. The films also exhibited distinct changes in their optical properties at different doping concentrations, including a blue shift and slight widening of bandgap with increasing Al dopant concentration.     

Nanostructure and optical properties of M doped ZnO (M=Ni, Mn) thin films prepared by sol-gel process

The transparent thin films of undoped, Mn-doped, and Ni-doped zinc oxide (ZnO) have been deposited on glass substrates via sol-gel technique using zinc acetate dehydrate, nickel chloride, and manganese chloride as precursors. The structural properties and morphologies of the deposited undoped and doped ZnO thin films have been investigated. X-ray diffraction (XRD) spectra, scanning electron microscopy (SEM), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS) were used to examine the morphology and microstructure of the thin films. Optical properties of the thin films were determined by photoluminescence (PL) and UV/vis spectroscopy. The analyzed results indicate that the obtained films are of good crystal quality and have smooth surfaces, which have a pure hexagonal wurtzite ZnO structure without any Mn or Ni related phases. The band gap energy was estimated by Tauc's method and found to be 3.28, 3.26, and 3.34 eV for ZnO, Ni-doped ZnO, and Mn-doped ZnO thin films at room temperature, respectively. Room temperature photoluminescence is observed for the ZnO, Ni-doped ZnO, and Mn-doped ZnO thin films.     

Influence of mesoporous substrate morphology on the structural, optical and electrical properties of RF sputtered ZnO layer deposited over porous silicon nanostructure

Morphological, optical and transport characteristics of the RF sputtered zinc oxide (ZnO) thin films over the mesoporous silicon (PS) substrates have been studied. Effect of substrate porosity on the grain growth and transport properties of ZnO has been analyzed. Physical and optical properties of ZnO-PS structures were investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), and photoluminescence (PL) spectroscopy. Our experimental results indicate that on changing porosity of the PS substrates, regularity of the spatial distribution of the ZnO nanocrystallites can be controlled. While the morphology and grain size of ZnO depended strongly on the morphology and pore size of the PS substrates, the rectifying factors of the metal semiconductor junction were found to be different by a factor of 3. The deposition of semiconducting oxides on such mesoporous substrates/templates offers the possibility to control their properties and amplify their sensing response.     

LiGaO2衬底上ZnO外延膜的结构与光学特性

采用磁控溅射法在(001),(100)及(010)LiGaO2衬底上制备了ZnO薄膜,通过X射线衍射(XRD)、原子力显微镜(AFM)、透过光谱以及光致发光谱(PL)对薄膜的结构、形貌及光学性质进行了表征.结果表明LiGaO2衬底不同晶面上制备的ZnO薄膜具有不同的择优取向,在(001)、(100)及(010)LiGaO2上分别获得了[001]、[1100]及[1120]取向的ZnO薄膜;不同取向的ZnO薄膜表面形貌差异较大;薄膜在可见光波段具有较高的透过率;在ZnO薄膜的光致发光谱中只观察到了位于378 nm的紫外发射峰,而深能级发射几乎观察不到,(1100)取向的薄膜紫外发射峰强度最大,半高宽也最小,薄膜光致发光件质的差异丰要和晶粒尺寸有关.     

Comparison of the optical properties of undoped and Ga-doped ZnO thin films deposited using RF magnetron sputtering at room temperature

The optical properties of undoped zinc oxide (ZnO) thin films of various thicknesses were compared with those of Ga-doped (GZO) thin films. Transparent, high-quality undoped ZnO and GZO films were deposited successfully using radio-frequency (RF) sputtering at room temperature. The films were polycrystalline with a hexagonal structure and a strongly preferred orientation along the c-axis. The films had an average optical transmission >85% in the visible part of the electromagnetic spectrum. The undoped ZnO thin films were more transparent than the GZO thin films. In the photoluminescence (PL) spectrum, ZnO film has higher quality than GZO as a result of decrease in the green emission intensity.     

Effect of substrate temperature on the structural and optical properties of ZnO and Al-doped ZnO thin films prepared by dc magnetron sputtering

ZnO and Al-doped ZnO(ZAO) thin films have been prepared on glass substrates by direct current (dc) magnetron sputtering from 99.99% pure Zn metallic and ZnO:3 wt%Al₂O₃ ceramic targets, the effects of substrate temperature on the crystallization behavior and optical properties of the films have been studied. It shows that the surface morphologies of ZAO films exhibit difference from that of ZnO films, while their preferential crystalline growth orientation revealed by X-ray diffraction remains always the (0 0 2). The optical transmittance and photoluminescence (PL) spectra of both ZnO and ZAO films are obviously influenced by the substrate temperature. All films exhibit a transmittance higher than 86% in the visible region, while the optical transmittance of ZAO films is slightly smaller than that of ZnO films. More significantly, Al-doping leads to a larger optical band gap (E_g) of the films. It is found from the PL measurement that near-band-edge (NBE) emission and deep-level (DL) emission are observed in pure ZnO thin films. However, when Al was doped into thin films, the DL emission of the thin films is depressed. As the substrate temperature increases, the peak of NBE emission has a blueshift to region of higher photon energy, which shows a trend similar to the E_g in optical transmittance measurement.     

Effect of NH4OH concentration on p-type doped ZnO film by solution based process

Highly oriented and large scale p-type ZnO:Al:N films have been successfully synthesized by a simple, solution-based approach. In this approach, p-type doping of zinc oxide was achieved using combination of aqueous ammonia, zinc acetate and aluminium chloride. X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), photoluminescence and Hall measurements indicate that the structure of the ZnO:Al:N films were highly influenced by aqueous ammonia concentration. Excessive aqueous ammonia results in randomly oriented film with excessive precipitation.     

Structural and optical properties of nanocrystalline ZnO thin films synthesized by the citrate precursor route

Nanocrystalline zinc oxide (ZnO) thin films have been deposited by spin-coating polymeric precursors synthesized by the citrate precursor route using ethylene glycol and citric acid as chelating agents. The ZnO thin films were annealed in air at different temperatures for 10 min. The films were characterized by different structural and optical techniques, including X-ray diffraction (XRD), atomic force microscopy (AFM), optical transmission spectroscopy, and photoluminescence (PL). The thermal decomposition of polymeric precursor was studied by thermogravimetric analysis (TGA). XRD analysis with grazing incidence and rocking curves indicate that the ZnO films are polycrystalline with preferential orientation along the c-axis direction with a full-width at half-maximum (FWHM) of 0.31° for 600 °C-annealed samples. On annealing, the texturing in films increased along with a decrease in FWHM. AFM micrographs illustrate that the ZnO films are crack-free with well-dispersed homogeneous and uniformly distributed spherical morphology. The synthesized ZnO thin films have transparency >85% in the visible region exhibiting band edge at 375 nm, which becomes sharper with anneal. Room temperature PL spectra of these films show strong ultraviolet (UV) emission around 392 nm with an increase in intensity with annealing temperature, attributed to grain growth. Deconvolution of the PL spectra reveals that there is coupling of free excitons with higher orders of longitudinal optical (LO) phonon replicas leading to a broad asymmetric near-band-edge peak.     

Stabilization in electrical characteristics of hydrogen-annealed ZnO:Al films

Al-doped ZnO (ZnO:Al) films prepared by RF magnetron co-sputtering at room temperature were thermally treated in hydrogen ambient at 300 °C to enhance the films’ characteristics for transparent conductive oxide applications. The electrical properties of the hydrogen-annealed films were improved and preserved in air ambient, even though the crystal structures of the films were not changed by the thermal treatment. The optical and oxygen bonding characteristics of ZnO:Al films manifested that absorbed oxygen species on the films were removed by the hydrogen-annealing process. These results supported that the development of the electrically reliable ZnO:Al films could be realized using the hydrogen-annealing process.     

Growth of ZnO nanostructures by vapor–liquid–solid method

Zinc oxide nanorods have been grown by vapor–liquid–solid (VLS) catalytic growth. The optical properties and structures properties of the grown ZnO nanostructures have been studied by photoluminescence, high resolution X-ray diffraction and scanning electron microscopy. The results show that the formation of ZnO nanostructures is strongly influenced by the growth conditions and used substrates. It was found that oriented ZnO nanorods are grown more easily on a substrate with a similar crystalline structure as ZnO. By optimizing growth conditions, oriented-ZnO nanorods grown on Si(001) substrate with a diameter of around 300 nm and lengths of 20 to 35 μm have been achieved, and they show excellent optical properties. Laser action has been observed at room temperature by using optical pumping. PACS 81.05.Dz; 81.10.Bk; 81.16.Hc     

Structural and optical properties of Mn-doped ZnO nanocrystalline thin films with the different dopant concentrations

The transparent nanocrystalline thin films of undoped zinc oxide and Mn-doped (Zn_1−xMn_xO) have been deposited on glass substrates via the sol–gel technique using zinc acetate dehydrate and manganese chloride as precursor. The as-deposited films with the different manganese compositions in the range of 2.5–20 at% were pre-heated at 100 °C for 1 h and 200 °C for 2 h, respectively, and then crystallized in air at 560 °C for 2 h. The structural properties and morphologies of the undoped and doped ZnO thin films have been investigated. X-ray diffraction (XRD) spectra, scanning electron microscopy (SEM), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS) were used to examine the morphology and microstructure of the thin films. Optical properties of the thin films were determined by photoluminescence (PL) and UV/Vis spectroscopy. The analyzed results indicates that the obtained films are of good crystal quality and have smooth surfaces, which have a pure hexagonal wurtzite ZnO structure without any Mn related phases. Room temperature photoluminescence is observed for the ZnO and Mn-doped ZnO thin films.     

Structural, morphological and photoluminescence properties of W-doped ZnO nanostructures

W-doped ZnO nanostructures were synthesized at substrate temperature of 600 °C by pulsed laser deposition (PLD), from different wt% of WO₃ and ZnO mixed together. The resulting nanostructures have been characterized by X-ray diffraction, scanning electron microscopy, atomic force microscopy and photoluminescence for structural, surface morphology and optical properties as function of W-doping. XRD results show that the films have preferred orientation along a c-axis (0 0 L) plane. We have observed nanorods on all samples, except that W-doped samples show perfectly aligned nanorods. The nanorods exhibit near-band-edge (NBE) ultraviolet (UV) and violet emissions with strong deep-level blue emissions and green emissions at room temperature.