Study of the structural,elastic, electronic and optical properties of lead free halide double perovskites Cs2AgBiX6(X = Br,Cl)

The lead free halides double perovskites show a particular interest in the conception of perovskites solar cells. We predicted the lattice constant and the atomic Wycko position of these lead free halide double perovskites Cs₂AgBiX₆ (X?=?Br, Cl) under pressure effect. The alloying ability of crystal, elastic constants and related parameters, electronic and optical properties have been studied using pseudo potential plane wave method based on the density functional theory. The investigated lead free halide double perovskites Cs₂AgBiX₆ (X?=?Br, Cl) show a weaker resistance to compression along the a-axis. This result also proves the existence of a directional bonding between atoms and a weaker resistance to compression along the a-axis The band structure indicates that Cs₂AgBiX(X?=?Br, Cl) are X–L indirect gap semiconductors. Our computed bulk modulus and its pressure derivative of double perovskites Cs₂AgBiX₆ (X?=?Br, Cl) are predictions. The calculated elastic constants of Cs₂AgBiX₆ (X?=?Br, Cl) at equilibrium and under pressure effect are predictions.     

First principle investigation of the structural,electronic and elastic properties of the Laves phase compounds SrX2 (X = Pd and Pt)

Structural, electronic and elastic properties of the cubic Laves phases SrX₂ (X = Pd and Pt) with Fd-3 m (No. 227) space group and crystallize in the MgCu₂ structure are studied using the all-electrons full potential linearized augmented plane wave (FP-LAPW) method as implemented in the Wien2k code. The exchange-correlation potential (E_xc) was treated within the scheme of Perdew, Burke, and Ernzerhof generalized gradient approximation (PBE-GGA). In present calculations, studied compounds show a metallic characteristic. When the palladium element was replaced with the platinum, the Fermi level was observed to be increased, indicating an increase in the additional valence electrons that filled the hybridized bonding states. The elastic constants were calculated for both compounds and show that the two compounds suitably verify the Born's mechanical stability criteria and have the ductile manner behaviors.     

Investigation of structural,electronic, elastic and phonon properties of cubic spinel ZnM2O4(M = Co,Rh and Ir) compounds

The results obtained from ab initio calculations on ZnM₂O₄ (M = Co, Rh and Ir) compounds have been reported. The elastic constants, Bulk, Shear and Young modulus, and Poisson's ratios of the compounds are presented. In addition, full phonon dispersion curves and projected density of states of the compounds have been computed using the direct method. The lattice parameters (a) and internal parameters (u) are found to be in a good agreement with experimental results. According to both the B/G values and the Poisson's ratio, these compounds have covalent bondings. The analysis of the band structure of these compounds have indicated indirect band gaps of 1.25 eV for ZnCo₂O₄ and 1.14 eV for ZnRh₂O₄ and 0.86 eV for ZnIr₂O₄. The full phonon spectra of these compounds show that they are dynamically stable in the cubic spinel structure.     

An examination of the structural,electronic, elastic,vibrational and thermodynamic properties of Ru2YGa (Y = Sc,Ti and V) Heusler alloys

The structural, electronic, elastic, vibrational and thermodynamic properties of the Ru₂YGa (Y = Sc, Ti and V) Heusler alloys in L2₁ type cubic structure have been analyzed systematically using first principles density functional theory (DFT) together with the Generalized Gradient Approximation (GGA) method. The values of calculated lattice constant (a₀), elastic constants (Cij), Bulk modulus (B), Shear modulus (G), ratios of B/G, Young's modulus (E) and Poisson ratio (ν) are in good agreement with the available theoretical and experimental results. The electronic band structures, corresponding total and partial density of states have also been obtained. The calculated band structures demonstrate that Ru2YGa (Y = Sc, Ti and V) alloys are metallic. The phonon dispersion curves, total and partial density of states of these alloys have been computed for the first time by adopting the direct method. It is considered that all alloys are dynamically stable in L2₁ structure.     

Geometry and electronic properties of Cu2(n≤9)

The equilibrium geometries and the atomization energies of Cu_n(n≤9) clusters have been calculated using the B3LYP/LANL2DZ method. It is shown that the clusters do not copy the bulk structures and undergo significant geometrical changes with size and the atomization energy per atom increases monotonically with size. By analysing the energy level distribution, the Fermi level, HOMO－LUMO gaps, the electron affinities and the ionization potentials are calculated and the results are in reasonable agreement with experiment. These electronic properties are found to be strongly structure dependent, which can be used to determine which of the low-lying structures is observed experimentally.     

First-principles study of the structural,mechanical and electronic properties of ZnX2O4（X=Al,Cr and Ga）

This paper performs first-principles calculations to study the structural,mechanical and electronic properties of the spinels ZnAl2O4 ,ZnGa2O4 and ZnCr2O4 ,using density functional theory with the plane-wave pseudopotential method. Our calculations are in good agreement with previous theoretical calculations and the available experimental data. The studies in this paper focus on the evolution of the mechanical properties of ZnAl2O4 ,ZnGa2O4 and ZnCr2O4 under hydrostatic pressure. The results show that the cubic phases of ZnAl2O4 ,ZnGa2O4 and ZnCr2O4 become unstable at about 50 GPa,40 GPa and 25 GPa,respectively. From analysis of the band structure of the three compounds at equilibrium volume,it obtains a direct band gap of 4.35 eV for ZnAl2O4 and 0.89 eV for ZnCr2O4 ,while ZnGa2O4 has an indirect band gap of 2.73 eV.     

First-principle study on the electronic structure and the anti-ferromagnetic properties of the organic-inorganic hybrid compound [Co(μ1,3-SCN)2(μ1,6-dmpzdo)]n

The electronic and the magnetic properties of the molecule-based magnet [Co(μ_1,3-SCN)₂(μ_1,6-dmpzdo)]n (where dmpzdo=2,5-dimethylpyrazine-1,4-dioxide) have been investigated using first-principles, namely density-functional theory (DFT) with the generalized gradient approximation (GGA) method and the full-potential linearized augmented plane-wave method (FP_LAPW). The total energy, the spin magnetic moments and the density of states (DOSs) were all calculated and spin distributions in ferromagnetic and anti-ferromagnetic (AFM) states of it have been obtained by the calculation. The electronic structure and magnetic coupling between cobalt ions along chain are discussed, and the calculations reveal that the compound [Co(μ_1,3-SCN)₂(μ_1,6-dmpzdo)]n has a stable anti-ferromagnetic ground state, which is in good agreement with the experimental results.     

First-principles study of metal-semiconductor contact between MX2 (M = Nb,Pt; X = S,Se) monolayers

First principles calculations are performed to investigate the structural and electronic properties of MX₂ (M = Nb, Pt; X = S, Se) monolayers and their van der Waals (vdW) heterostructures. The dynamical stability of monolayers and vdW heterostructures is confirmed by binding energy and phonon spectra. An indirect band gap nature is found for PtS₂ and PtSe₂ monolayers while NbS₂, NbSe₂ and all vdW heterostructures are metals. The intrinsic electronic properties of both NbX₂ and PtX₂ are well preserved due to weak vdW contact. It is demonstrated that a p-type Schottky contact with a small barrier height is formed at NbX₂-PtX₂ interface. The zero tunnel barrier and higher potential drop across the interface in these contacts imply large transfer of charge carriers across the interface, making them potential candidates in nanoelectronic device applications.     

First principles study on structural,electronic and optical properties of Ga1−xBxP ternary alloys (x = 0, 0.25, 0.5, 0.75 and 1)

The structural, electronic and optical properties of GaP, BP binary compounds and their ternary alloys Ga_1?xB_xP ($x=0.25$, 0.5 and 0.75) have been studied by full-potential linearized augmented plane wave (FP-LAPW) method within the framework of density functional theory (DFT) as implemented in WIEN2k package. Local density approximation (LDA) and generalized gradient approximation (GGA) as proposed by Perdew–Burke–Ernzerhof (PBE), Wu–Cohen (WC) and PBE for solid (PBESol) were used for treatment of exchange-correlation effect in calculations. Additionally, the Tran–Blaha modified Becke–Johnson (mBJ) potential was also employed for electronic and optical calculations due to that it gives very accurate band gap of solids. As B concentration increases, the lattice constant reduces and the energy band gap firstly decreases for small composition x and then it shows increasing trend until pure BP. Our results show that the indirect–direct band gap transition can be reached from $x=0.33$. The linear optical properties, such as reflectivity, absorption coefficient, refractive index and optical conductivity of binary compounds and ternary alloys were derived from their calculated complex dielectric function in wide energy range up to 30 eV, and the alloying effect on these properties was also analyzed in detail.     

Structural,electronic and mechanical properties of C14-Mg2RE (RE = Eu,Er, Tm,Yb and Lu) Laves phases: A DFT study

The Pseudo-Potential Density Functional Theory (PP-DFT) method is applied to investigate the structural, electronic and mechanical properties of C14-Mg₂RE Laves phases, with RE being Eu, Er, Tm, Yb and Lu. The predicted cell parameter and c/a ratio of each compound are in good agreement with experimental and theoretical results. Moreover, the studied alloys exhibit a metallic character, which is attributed to the presence of Mg atoms in the C14 Laves phase. Also, the formation of C14-Mg₂RE is found to be controlled by the hybridisation between Mg p states and RE-d and f states. From a mechanical property analysis, the studied alloys are found to be mechanically stable. The Mg₂Lu compound exhibits higher ductility, while Mg₂Er exhibits the smallest one. Finally, Mg₂Yb is found to be more anisotropic than other phases.     

High-resolution infrared and theoretical study of the fundamental bands ν2, ν4 and ν9 and the c-Coriolis interacting dyad ν5, ν14 of 1,3,4-thiadiazole

The Fourier transform gas-phase IR spectrum of 1,3,4-thiadiazole, C₂H₂N₂S, has been recorded with a resolution of ca. 0.003 cm⁻¹ in the 800-1500 cm⁻¹ spectral region. Five fundamental bands ν₂(A₁; 1391.9 cm⁻¹), ν₄(A₁; 964.4 cm⁻¹), ν₅(A₁; 894.6 cm⁻¹), ν₉(B₁; 821.5 cm⁻¹), and ν₁₄(B₂; 898.4 cm⁻¹) have been analysed using the Watson model. Ground state rotational and quartic centrifugal distortion constants as well as upper state spectroscopic constants have been obtained from fits. The ν₄ and ν₉ bands are unperturbed while a strong c-Coriolis resonance perturbs the close-lying ν₅ and ν₁₄ bands. This dyad system has been analysed by a model including first and second order c-Coriolis resonance using the theoretically predicted Coriolis coupling constant . The ν₂ band is strongly perturbed by a local resonance, and we obtain a set of spectroscopic parameters using a model including second order a-Coriolis resonance with the inactive ν₁₀ + ν₁₄ band. Ground state rotational and quartic centrifugal distortion constants, anharmonic frequencies, and vibration-rotational α-constants predicted by quantum chemical calculations using a cc-pVTZ basis and B3LYP methodology, have been compared with the present experimental data, where there is generally good agreement.     

Ab-initio study of structural,electronic, elastic and mechanical properties of RuAl1−xGax (x=0, 0.25, 0.50, 0.75 and 1)

We have used special quasirandom structure to study the structural, electronic, elastic and mechanical properties of RuAl_1−xGa_x alloys for different compositions (x=0, 0.25, 0.50, 0.75 and 1) using a FP-LAPW method based on Density Functional Theory. The exchange and correlation potential is treated within the generalized gradient approximation. Ground state properties such as lattice constant (a₀), bulk modulus (B), its pressure derivative (B′) and elastic constants are calculated. The ductility of these alloys has been analyzed by calculating the ratio of B/G_H, Cauchy pressure (C₁₂–C₄₄) and Frantsevich rule. From this study RuAl and RuGa are found to be brittle, but their alloys show ductile behavior; RuAl_0.50Ga_0.50 is found to be most ductile. Mechanical properties such as Poisson's ratio (σ), Young's moduli (E), and the ratio of elastic anisotropy factor (A) are estimated. We have also correlated the ductility and bonding behavior of these alloys.     

The 2ν1, 2ν2 and 2ν3 overtones of FClO3

The infrared spectra of the 2ν₁, 2ν₂ and 2ν₃ overtones of perchloryl fluoride, FClO₃, have been recorded at high resolution using monoisotopic pure samples. Four symmetric top species have been investigated: F³⁵Cl¹⁶O₃, F³⁷Cl¹⁶O₃, F³⁵Cl¹⁸O₃ and F³⁷Cl¹⁸O₃. The v_i = 2, i = 1, 2, 3 vibrationally excited states are totally symmetric, so these overtones correspond to parallel bands of medium/weak intensity, centered from 2010 to 2120 cm⁻¹ (2ν₁), from 1390 to 1430 cm⁻¹ (2ν₂) and from 1070 to 1100 cm⁻¹ (2ν₃). Most of the bands are unperturbed and their analysis was straightforward. The band origins, the rotational and centrifugal molecular constants in the v₁ = 2, v₂ = 2 and v₃ = 2 states have been determined, with standard deviations of the fits from 0.00024 to 0.00067 cm⁻¹. The 2ν₁ overtones of F³⁵Cl¹⁶O₃ and F³⁷Cl¹⁶O₃ are perturbed by an A₁/E Coriolis resonance between the v₁ = 2 state and one E component of the v₄ = 1, v₆ = 2 manifold. The 2ν₂ of F³⁷Cl¹⁸O₃ is perturbed by the same kind of interaction involving the v₁ = v₆ = 1 (E) state, at about 1396 cm⁻¹. In these bands the resonance is localized on rotational levels with specific J and K values. As a consequence, a few transitions of the perpendicular bands involving the interacting levels could be identified in the spectra. A simultaneous fit of the transitions assigned to the dyads has been performed and the parameters of the excited states have been determined, including the high order Coriolis interaction coefficient . The anharmonic constants x₁₁, x₂₂, x₃₃ of all the studied isotopologues of FClO₃, x₄₆ of F³⁵Cl¹⁶O₃, x₄₆ + g₄₆ of F³⁷Cl¹⁶O₃ and x₁₆ of F³⁷Cl¹⁸O₃, have been derived.     

High-resolution infrared and theoretical study of the fundamental bands ν6, ν7, ν9 and ν13 of 1,2,3-thiadiazole

The Fourier transform gas-phase IR spectrum of 1,2,3-thiadiazole, C₂H₂N₂S, has been recorded with a resolution of ca. 0.003 cm⁻¹ in the 700-1100 cm⁻¹ spectral region. Four fundamental bands ν₆(A^/; 1101.8 cm⁻¹), ν₇(A^/; 1038.8 cm⁻¹), ν₉(A^/, 858.9 cm⁻¹), and ν₁₃(A^//; 746.2 cm⁻¹) have been analyzed using the Watson model in A-reduction. Two additional bands, ν₈ (A^/; 894.6 cm⁻¹) and ν₁₂(A^//; 881.2 cm⁻¹) were assigned by their weak Q-branches. Ground state rotational and quartic centrifugal distortion constants as well as upper state spectroscopic constants have been obtained from fits. A number of weak global and local interactions are present in the bands. The resonances identified were qualitatively explained by Coriolis type perturbations with neighboring levels. Ground state rotational and quartic centrifugal distortion constants, anharmonic frequencies, and vibration-rotational α-constants predicted by quantum chemical calculations using a cc-pVTZ basis and B3LYP methodology, have been compared with the present experimental data, where there is generally good agreement.     

The structural,elastic, and electronic properties of ZrxNbl-xC alloys from first principle calculations＊

The structural, elastic, electronic, and thermodynamic properties of ZrxNbl xC alloys are investigated using the first principles method based on the density functional theory. The results show that the structural properties of Zr~.Nb1 xC alloys vary continuously with the increase of Zr composition. The alloy possesses both the highest shear modulus （215 GPa） and a higher bulk modulus （294 GPa）, with a Zr composition of 0.21. Meanwhile, the Zr0.2! Nb0.79C alloy shows metallic conductivity based on the analysis of the density of states. In addition, the thermodynamic stability of the designed alloys is estimated using the calculated enthalpy of mixing.     

First-principles calculation of the structural,electronic, elastic,and optical properties of sulfur-doping ε-GaSe crystal

The structural,electronic,mechanical properties,and frequency-dependent refractive indexes of GaSe_(1-x)S_x(x=0,0.25,and 1) are studied by using the first-principles pseudopotential method within density functional theory.The calculated results demonstrate the relationships between intralayer structure and elastic modulus in GaSe_(1-x)S_x(x=0,0.25,and 1).Doping of ε-GaSe with S strengthens the Ga-X bonds and increases its elastic moduli of C_(11) and C_(66).Born effective charge analysis provides an explanation for the modification of cleavage properties about the doping of e-GaSe with S.The calculated results of band gaps suggest that the distance between intralayer atom and substitution of S_(Se),rather than interlayer force,is a key factor influencing the electronic exciton energy of the layer semiconductor.The calculated refractive indexes indicate that the doping of ε-GaSe with S reduces its refractive index and increases its birefringence.     

First-principles study of electronic properties and stability of Nb5SiB2（001） surface

The density functional calculations are performed to study the electronic structure and stability of Nb 5 SiB 2(001) surface with different terminations.The calculated cleavage energies along the(001) planes in Nb 5 SiB 2 are 5.015 J · m 2 and 6.593 J · m 2 with the break of Nb-Si and Nb-NbB bonds,respectively.There exists a close correlation between the surface relaxation including surface ripple and the cleavage energy:the larger the cleavage energy,the larger the surface relaxation.Moreover,the surface stability of the Nb 5 SiB 2(001) with different terminations has been investigated by the chemical potential phase diagram.From a thermodynamics point of view,the four terminations can be stabilized under different conditions.In chemical potential space,NbB(Nb) and Nb(Si) terminations are just stable in a small area,whereas Si(Nb) and Nb(NbB) terminations are stable in a large area(the letters in brackets represent the subsurface atoms).     

DFT study on size-dependent geometries, stabilities, and electronic properties of AunM2 (M = Si, P; n = 1–8) clusters

The ab initio method based on density functional theory at the PW91PW91 level has been employed to systematically study the structures, stabilities, electronic, and magnetic properties of gold clusters with or without silicon/phosphorus doping. The optimized geometries show that the most stable isomers for Au _n Si₂ and Au _n P₂ (n = 1–8) clusters prefer a three-dimensional structure when n = 2 and n = 3 upwards, respectively, and they can be viewed as grown from the already observed Au _n−1M₂ (M = Si, P). The relative stabilities of calculated Au _n M₂ (M = Si, P) clusters have been analyzed through the atomic average binding energy, fragmentation energy, second-order difference of energy, and HOMO-LUMO gap. A pronounced odd-even alternative phenomenon indicates that the clusters with even-numbered valence electrons possess a higher stability than their neighboring ones. For both systems, natural population analysis reveals that electronic properties of dopant atoms in the corresponding configuration are mainly related to s and p states. We also investigated magnetic effects of clusters as a function of cluster size, however, their oscillatory magnetic moments were found to vary inversely to the fragmentation energy, second-order difference of energy, and HOMO-LUMO gap.     

Insight into the structural,elastic, electronic,thermoelectric, thermodynamic and optical properties of MRhSb (M = Ti,Zr, Hf) half-Heuslers from ab initio calculations

A detailed theoretical investigation on the structural, elastic, electronic, thermoelectric, thermodynamic and optical properties of half-Heusler MRhSb (M = Ti, Zr, Hf) compounds is presented. The computations are carried out using the full potential linear augmented plane wave method (FP-LAPW) within density functional theory (DFT). The optimized lattice parameters are in fairly good agreement with available experimental data. The computed elastic constants (C_ij) and their related elastic moduli confirm the stability of the studied compounds in the cubic phase and highlight their ductile nature. Analysis of band structures and densities of states (DOS) profiles reveal the semiconducting nature with an indirect energy band gap (Γ-X). The bonding nature discussed via the electron charge density plot shows a mixture of covalent and ionic character. The evaluation of Seebeck coefficient leads to thermopower S ≥ 500 µeV which is very benefic for thermoelectric applications. Estimated thermodynamic characteristic within the quasi-harmonic approximation shows similar behavior for the three compounds. Finally, some optical spectra such as the complex dielectric function, refractive index, reflectivity, energy loss function and absorption are presented.