芯帽纳米颗粒的光热性质

贵金属纳米结构中的光热效应在肿瘤光热治疗、光热成像、纳米药物等领域具有重要的应用价值.各向异性的芯帽纳米结构以其丰富的可调结构参数和对激发光偏振态敏感的特性,可灵活地在近红外波段获得理想的光学吸收性质,从而可以实现温度的高效调节.本文基于有限元方法研究了颗粒物纳米结构参数对其光热效果的作用规律,数值结果表明:通过对结构参数的微量改变(包括金壳厚度、芯壳比、芯径、金属表面覆盖率等)可实现温度的显著调整;在偏振态的旋转范围(30?—70?)内可快速地产生大温变光热的准线性调整.其不弱于纳米芯壳和纳米棒结构的光热性能可为纳米光热生医研究提供一种新的选择.     

单芯帽纳米颗粒的光学性质

基于三维时域有限差分法,计算了非球对称单芯帽纳米颗粒在不同结构参数作用下的局域表面等离子体共振(LSPR)响应。采用模板法和真空蒸镀技术制备了SiO_2@Au芯帽结构纳米颗粒,通过透射电子显微镜和紫外可见近红外分光光度计对其形貌和光学性质进行了测量分析,获得了金壳厚度、芯壳比、芯径和金属表面覆盖率等纳米结构参数对LSPR峰值吸收波长和吸收截面的影响规律。结果表明,芯帽纳米颗粒结构参数的微小改变会导致LSPR峰在可见光到近红外波段的宽带红移。     

金复合纳米微粒的消光特性

基于Mie光散射理论,研究了金壳介质芯的金复合纳米球壳微粒在光散射与吸收中的消光特性.对微粒增大时的多极子特性以及内半径变动时共振峰的移动作了计算和分析,证实了共振峰位置随内外半径比增大而增大的规律.还对纯金纳米微粒的多极子特性作了计算,并讨论了总消光效率中散射和吸收各自的贡献.     

表面修饰基团对金纳米颗粒非线性光学效应的影响研究

采用两相法分别制备一级硫醇修饰和二级十六烷基三甲基溴化铵(CTAB) 修饰的金纳米颗粒,通过透射电子显微镜和紫外-可见吸收光谱表征了其结构和线性光学性质. 采用开孔Z扫描技术,研究表面修饰对金纳米颗粒在532 nm波长激光作用下的非线性光学效应及光限幅性能的影响行为.结果表明,二级CTAB的修饰增强了颗粒在激光照射下的局域场作用, 并提高了热电子对非线性光学效应的贡献程度,从而有效地提高了金纳米颗粒的光限幅性能.     

具有新光学性质的Zn-Zn2SiO4纳米同轴线阵列

采用气相沉积技术在Si衬底上生长了Zn-Zn₂SiO₄芯-壳结构纳米同轴线阵列。根部呈笋状的纳米同轴线,直径约100nm,长度可以超过10μm;同轴线芯直径约50nm、壳层厚约25nm。通过X射线衍射的表征以及能量色散谱的线扫描,确定纳米同轴线的芯为Zn,壳层为Zn₂SiO₄。我们提出了一种新的生长机制,同时也为生长均匀的纳米同轴线提供一种新的技术。观察阴极荧光谱发现,纳米同轴线有三个主要发光带:强度最大的中紫外300nm发光、较弱的可见光区560nm以及红外谱区865nm的发光。对纳米同轴线截面的300nm发光峰观测发现,中紫外发光来源于Zn₂SiO₄壳层。正是这种同轴线的结构,使得其具备特殊的光学性质。     

纳米银颗粒掺杂铋酸盐玻璃的光谱与三阶非线性光学特性研究

采用新型的热化学还原法,制备了银纳米颗粒掺杂的铋酸盐复合玻璃材料。利用紫外-可见吸收光谱观察到了银纳米颗粒表面等离子谐振(SPR)吸收的峰值位移特性,用拉曼光谱表征了引入银纳米颗粒后玻璃的结构变化。借助飞秒激光脉冲激发下的Z扫描与光克尔闸技术,在近红外波段下研究了材料的三阶非线性光学特性。研究结果表明银纳米颗粒铋酸盐复合材料有着亚皮秒级的非线性响应时间,并且其非线性折射率γ在纳米颗粒的热电子效应以及局部场效应的影响下,较基质玻璃最高可以提升29倍。     

银纳米颗粒减反射特性的理论研究

为增强晶体硅太阳电池的光利用效率,提高光电转换效率,研究了金属银纳米颗粒的光学散射性质.基于银纳米粒子表面等离子激元效应和MIE散射理论,采用Matlab数值计算,理论分析了不同银纳米颗粒尺寸和银粒子分布密度对太阳光谱各波长的散射特性.获得了实现高的光透过率所需最佳银纳米颗粒半径范围,研究发现随着银纳米颗粒半径增加,偶极峰红移、高极峰逐渐出现.定量地给出了最佳颗粒分布密度随银粒子半径的变化规律,建立了计算减反射膜透射率的理论方法,找到了银纳米颗粒光学透过率的简单函数表达式,能为实验研究提供理论指导. 关键词： 银纳米颗粒 透过率 MIE理论 太阳电池     

掺杂LaF3:Er,Yb纳米颗粒的有机无机复合型平面光波导放大器的制备及增益测试

采用油酸修饰的铒镱共掺氟化镧纳米颗粒掺杂的有机-无机杂化材料做为光波导放大器的有源层,同时采用光学性质良好的甲基丙烯酸甲酯-甲基丙烯酸环氧丙酯共聚物制作光波导的上下包层,首先说明了芯层材料不能刻蚀制备传统矩形波导的原因,其次设计了一种倒眷结构的平面光波导放大器,并采用蒸镀铝掩膜、紫外光刻和反应离子刻蚀等工艺,制备出放大...     

用光声技术研究半导体TiO2,ZnO纳米晶粉的光学特性

应用新型的光声光谱技术,研究了不同种类和不同制备工艺条件的半导体纳米晶粉的光学特性,测量了半导体TiO2、ZnO和掺铝ZnO纳米晶粉的光声光谱,获得了这些半导体纳米晶粉的带隙和光谱吸收系数.研究结果表明,相同种类和相同颗粒形状的半导体纳米晶粉的粒径越小,光学吸收系数越大.半导体纳米晶粉的带隙与相同种类纳米颗粒形状(圆球...     

硅纳米孔柱阵列的结构和光学特性研究

采用水热腐蚀技术在单晶硅衬底上制备出一种新的硅微米／纳米结构复合体系——硅纳米孔柱阵列(Si-NPA)，并对其表面形貌、结构及光学特性进行研究.Si-NPA的结构复合性体现为 在微米和纳米两个尺度上形成了三个分明的结构层次，即微米尺度的硅柱阵列结构、硅柱上 的纳米多孔结构以及组成孔壁的硅纳米晶粒.积分光反射谱和荧光光谱测试表明，Si-NPA具 有良好的光吸收和光致发光特性.依据Si－NPA积分反射谱的实验数据，采用Kramers-Kronig 变换关系计算得到了Si-NPA的复折射率和复介电函数、吸收系数等光学常数，并由此讨论了 Si-NPA相对于单晶硅的光学特性发生显著变化的原因.最后，通过分析Si-NPA的光吸收系数 与入射光子能量之间的关系，揭示出Si-NPA具有直接带隙半导体的电子结构特征，而且理论 计算得到的Si-NPA的带隙能与其光致发光谱的峰位能很好符合. 关键词： 硅纳米孔柱阵列 光学特性 电子结构 水热腐蚀     

核壳结构CdS/ZnS纳米微粒的制备与光学特性

用微乳液法制备CdS纳米微粒 ,以ZnS对其进行表面修饰 ,得到具有核壳结构的CdS/ZnS纳米微粒 .采用X射线衍射 (XRD)、透射电镜 (TEM )表征其结构、粒度和形貌 ,紫外 可见吸收光谱 (UV)、光致发光光谱(PL)表征其光学特性 .制得的CdS近似呈球形 ,直径为 3.3nm ;以XRD和UV证实了CdS/ZnS核壳结构的实现 .研究了不同ZnS壳层厚度对CdS纳米微粒光学性能的影响 ,UV谱表明随着壳层厚度的增加纳米微粒的吸收带边有轻微的红移 ,同时短波吸收增强 ;PL谱表明壳层ZnS的包覆可减少CdS纳米微粒的表面缺陷 ,带边直接复合发光的几率增大 ,具有合适的壳层厚度时发光效率大大提高 .     

Characterization of semiconductor core-shell nanoparticles by resonant Raman scattering and photoluminescence spectroscopy

Colloidal CdSe nanoparticles (NPs), passivated with CdS and ZnS, were characterized by resonant Raman scattering and photoluminescence (PL). The effect of the passivating shell, its volume and formation procedure on optical and vibrational spectra is discussed. Analyzing the Raman peaks due to optical phonons inside the core and those related to the core-shell interface allows some understanding of the relation between the core-shell structure and its PL properties to be achieved. In particular, a compositional intermixing at the core/shell interface of the NPs was deduced from the Raman spectra, which can noticeably affect their PL intensity.     

Synthesis and characterization of ZnO-Ag core-shell nanocomposites with uniform thin silver layers

This paper presents an investigation on the synthesis and characterization of ZnO-Ag core-shell nanocomposites. ZnO nanorods were employed as core material for Ag seeds, and subsequent nucleation and growth of reduced Ag by formaldehyde formed the ZnO-Ag core-shell nanocomposites. The ZnO-Ag nanocomposites were annealed at different temperature to improve the crystallinity and binding strength of Ag nanoparticles. The morphology, microstructure and optical properties of the ZnO-Ag core-shell nanocomposites were characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, ultraviolet-visible (UV-vis) absorption and photoluminescence measurement. It was demonstrated that very small face-center-cubic Ag nanoparticles were coated on the surface of ZnO nanorods. The ultraviolet absorption and surface plasmon absorption band of ZnO-Ag core-shell nanocomposites exhibited some redshifts relative to pure ZnO nanorods and monometallic Ag nanoparticles. The coating of Ag nanocrystals onto the ZnO nanorods completely quenched the photoluminescence. These observations reflected the strong interfacial interaction between ZnO nanorods and Ag nanoparticles. The effect of Ag coating thickness on the morphology and optical properties of ZnO-Ag core-shell nanocomposites was also investigated. Moreover, the growth mechanism of ZnO-Ag core-shell nanocomposites was also proposed and discussed in detail.     

Preparation, optical properties, magnetic properties and thermal stability of core-shell structure cobalt/zinc oxide nanocomposites

Cobalt nanoparticles coated with zinc oxide can form composite spheres with core-shell structure. This coating process was based on the use of silane coupling with agent 3-mercaptopropyltrimethoxysilane (HS-(CH₂)₃Si(OCH₃)₃, MPTS) as a primer to render the cobalt surface vitreophilic, thus it renders cobalt surface compatible with ZnO. X-ray photoelectron spectroscopy (XPS) was used to gain insight into the way in which the MPTS is bound to the surface of the cobalt nanoparticles. The morphological structure, chemical composition, optical properties and magnetic properties of the product were investigated by using transmission electron microscopy (TEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), photoluminescence (PL) spectroscope and vibrating sample magnetometer (VSM). It was found that the Co/ZnO core-shell structure nanocomposites exhibited both of favorable magnetism and photoluminescence properties. Results of the thermogravimetric analysis (TGA) and differential thermal analysis (DTA) indicated that the thermal stability of cobalt/zinc oxide was better than that of pure cobalt nanoparticles.     

Stabilization and controlled association of superparamagnetic nanoparticles using block copolymers

Mixing in aqueous solutions polyelectrolyte-neutral block copolymers with oppositely charged species, spontaneously forms stable core-shell complexes, which are electrostatically driven. We report here on the structural and orientational properties of such mixed magnetic nanoclusters made of magnetic iron oxide nanoparticles (MNPs) and polyelectrolyte-neutral block copolymers. Small angle neutron scattering and transmission electron microscopy experiments allows to probe the inner-core nanoparticle organization, leading to an average interparticle distance and confirming the hierarchical internal structure of the clusters. Thanks to the MNP optical anisotropy, we also probe the under-magnetic field orientational properties of the core-shell clusters and their dynamical rotational relaxation.     

Nanostructures of gold coated iron core-shell nanoparticles and the nanobands assembled under magnetic field

Pure metal iron nanoparticles are unstable in the air. By a coating iron on nanoparticle surface with a stable noble metal, these air-stable nanoparticles are protected from the oxidation and retain most of the favorable magnetic properties, which possess the potential application in high density memory device by forming self-assembling nanoarrays. Gold-coated iron core-shell structure nanoparticles (Fe/Au) synthesized using reverse micelles were characterized by transmission electron microscopy (TEM). The average nanoparticle size of the core-shell structure is about 8 nm, with about 6 nm diameter core and 1∼2 nm shell. Since the gold shell is not epitaxial growth related to the iron core, the morié pattern can be seen from the overlapping of iron core and gold shell. However, the gold shell lattice can be seen by changing the defocus of TEM. An energy dispersive X-ray spectrum (EDS) also shows the nanoparticles are air-stable. The magnetic measurement of the nanoparticles also proved successful synthesis of gold coated iron core-shell structure. The nanoparticles were then assembled under 0.5 T magnetic field and formed parallel nanobands with about 10 μm long. Assembling two dimensional ordered nanoarrays are still under going. Received 29 November 2000     

CdSe/ZnSe核-壳结构纳米粒子合成新方法

报道用“一步”合成新方法制备了CdSe/ZnSe核-壳结构的发光纳米粒子.该方法是将锌的前驱体注入表面Se富集的CdSe发光纳米粒子溶液中,通过Zn²⁺与Se共价键结合,从而在CdSe发光纳米粒子的表面形成ZnSe壳.分别通过X射线粉末衍射、光电子能谱、透射电镜、紫外-可见吸收光谱和光致发光光谱,对核-壳结构的发光纳米粒子的结构及光学性质进行了表征.结果表明,以较宽带隙的ZnSe在较窄带隙的CdSe纳米粒子表面形成的壳层有效地钝化了CdSe纳米粒子的表面缺陷,明显地提高了室温下CdSe纳米粒子的光致发光效率.X射线粉末衍射表明随着Zn²⁺的不断注入,CdSe/ZnSe的衍射峰逐渐移向ZnSe衍射峰.光电子能谱数据显示,Zn2p的双峰分别位于1020,1040eV附近,通过与体材料ZnO相比,确定为Zn²⁺的光电子发射,说明Zn是以共价键形式存在于CdSe纳米粒子的表面.透射电镜照片显示纳米粒子具有良好的单分散性,核-壳结构的发光纳米粒子直径较CdSe核的直径明显增加.     

Fabrication and optical study of Ag@SnO<Subscript>2</Subscript> core-shell structure nanoparticle thin films

Ag@SnO₂ core-shell nanoparticles dispersed in poly-(vinyl) alcohol films were fabricated on glass substrate by employing a dip-coating technique. Synthesis of Ag@SnO₂ nanoparticles with core-shell morphology is carried out by a soft-chemical technique in aqueous phase at 60°C. Formation of core-shell structure is monitored by the red-shift of the surface plasmon band of Ag nanoparticles (from 390 to 410 nm) in the UV-visible spectrum. These nanoparticles are deposited on the glass substrate. The structure and morphology of these films were investigated by X-ray diffraction technique and field-emission transmission electron microscopy, respectively. Optical properties of these pseudo-solids were studied by UV-visible spectroscopy. Surface plasmon spectrum of the core-shell nanoparticles film remained unaltered with increase in the number of layers. However, silver nanoparticles films have shown peak broadening and development of additional peaks with increase in the number of layers. Our investigations showed that the surface plasmon band of the silver nanoparticles could be preserved by controlled deposition of the tin dioxide shell.     

Shell-driven magnetic stability in core-shell nanoparticles

The magnetic properties of ferromagnetic-antiferromagnetic Co-CoO core-shell nanoparticles are investigated as a function of the in-plane coverage density from 3.5% to 15%. The superparamagnetic blocking temperature, the coercivity, and the bias field radically increase with increasing coverage. This behavior cannot be attributed to the overall interactions between cores. Rather, it can be semiquantitatively understood by assuming that the shells of isolated core-shell nanoparticles have strongly degraded magnetic properties, which are rapidly recovered as nanoparticles come into contact.