表面等离子体调制单模面发射激光器的研究

对单模面发射半导体激光器的研究随着其应用的不断扩展而引起了人们的广泛的重视,应用多种方法可以提高其输出功率并改善其模式抑制比.利用金属表面等离子体纳米结构调制的方法可以获得单模面发射激光器输出功率的提高,理论计算表明这种方法增强效应可达近50%. 关键词： 表面等离子体 单模面发射激光器 模式选择     

A low-threshold and high-power oxide-confined 850-nm AlInGaAs strained quantum-well vertical-cavity surface-emitting laser

A low-threshold and high-power oxide-confined 850-nm AlInGaAs strained quantum-well (QW) vertical-cavity surface-emitting laser (VCSEL) based on an intra-cavity contacted structure is fabricated. A threshold current of 1.5 mA for a 22 μm oxide aperture device is achieved, which corresponds to a threshold current density of 0.395 kA/cm². The peak output optical power reaches 17.5 mW at an injection current of 30 mA at room temperature under pulsed operation. While under continuous-wave (CW) operation, the maximum power attains 10.5 mW. Such a device demonstrates a high characteristic temperature of 327 K within a temperature range from -12℃ to 96℃ and good reliability under a lifetime test. There is almost no decrease of the optical power when the device operates at a current of 5 mA at room temperature under the CW injection current.     

高功率垂直外腔面发射半导体激光器增益设计及制备

垂直外腔面发射半导体激光器(vertical external cavity surface emitting laser, VECSEL)兼具高功率与良好的光束质量,是半导体激光器领域的持续研究热点之一.本文开展了光抽运VECSEL最核心的多量子阱增益区设计,对量子阱增益光谱及其峰值增益与载流子浓度及温度等关系进行系统的理论优化,并对5种不同势垒构型的量子阱增益特性进行对比,证实采用双侧GaAsP应变补偿的发光区具有更理想的增益特性.对MOCVD生长的VECSEL进行器件制备,实现了VECSEL在抽运功率为35 W时输出功率达到9.82 W,并且功率曲线仍然没有饱和;通过变化外腔镜的反射率, VECSEL的激光波长随抽运功率的漂移系数由0.216 nm/W降低至0.16 nm/W,证实外腔镜反射率会影响VECSEL增益芯片内部热效应,从而影响VECSEL激光输出功率.所制备VECSEL在两正交方向上的发散角分别为9.2°和9.0°,激光光斑呈现良好的圆形对称性.     

808nm大孔径垂直腔面发射激光器研究

垂直腔面发射激光器(VCSEL)中的载流子聚集效应使注入到有源区的工作电流只是通过边缘环形区域很窄的通道,激光功率密度分布不均匀;尤其当器件尺寸较大时,激射光斑呈现环状,环中间光强很弱.这是研制电抽运高功率大尺寸VCSEL尤为突出的技术难题.采用新型结构成功研制出808 nm波段高功率大孔径VCSEL,在注入电流为1A时,室温下连续输出功率达0.3 W. 关键词： 半导体激光器 垂直腔面发射激光器 高功率 大孔径     

表面液晶-垂直腔面发射激光器阵列的热特性

液晶与垂直腔面发射半导体激光器(VCSELs)阵列结合可实现波长可调谐、偏振精确控制等,同时液晶的引入也会改变垂直腔面发射半导体激光器阵列的热特性,本文设计了表面液晶-垂直腔面发射激光器阵列结构,并开展了阵列的热特性实验研究.对比分析了向列相液晶层对VCSEL阵列热特性的影响,实验结果表明,1×1,2×2,3×3三种表面液晶-VCSEL阵列的阈值电流温度变化率最高可降低23.6%,热阻降低26.75%;同时,激光器阵列各发光单元之间的温度均匀性显著提高,出光孔与周围温差小于0.5℃.综上所述,VCSEL阵列中液晶层的引入不仅大大加速激光器阵列单元热量扩散,而且降低了有源区结温,提高了VCSELs激光器阵列热特性,为实现高光束质量的单偏振波长可控VCSEL激光器阵列打下了良好的理论和实验基础.     

Intracavity frequency-doubled green vertical external cavity surface emitting laser

An intracavity frequency-doubled vertical external cavity surface emitting laser (VECSEL) with green light is demonstrated. The fundamental frequency laser cavity consists of a distributed Bragg reflector (DBR) of the gain chip and an external mirror. A 12-mW frequency-doubled output has been reached at 540 nm with a nonlinear crystal LBO when the fundamental frequency output is 44 mW at 1080 nm. The frequency doubling efficiency is about 30%.     

利用光学薄膜模型研究垂直腔面发射激光器的光学特性

可以把垂直腔面发射激光器看作是多层光学薄膜,应用光学薄膜原理对其光学薄膜的特性进行了研究。计算分析了布拉格反射镜和谐振腔模的反射谱受器件结构变化的影响。通过利用菲涅耳系数矩阵法计算,得到了光在垂直腔面发射激光器器件结构中形成的驻波场分布。结果表明,利用菲涅耳系数矩阵法设计垂直腔面发射激光器的光学薄膜是一种快捷准确的方法。     

InGaAs/GaAs应变量子阱结构在1 054 nm激光器中的应用

采用金属有机物化学气相淀积(MOCVD)方法生长了InGaAs/GaAs应变量子阱,通过优化生长条件和采用应变缓冲层结构获得量子阱,将该量子阱结构应用于1 054 nm激光器的制备。经测试该器件具有9 mA低阈值电流和0.4 W/A较高的单面斜率效率,在驱动电流为50 mA时测得该应变量子阱光谱半宽为1.6nm,发射波长为1 054 nm。实验表明:通过优化工艺条件和采用应变缓冲层等手段,改善了应变量子阱质量,该结果应用于1 054 nm激光器的制备,取得了较好的结果。     

高速调制响应垂直腔面发射激光器中的微腔效应

应用微腔物理和量子阱物理，计算了量子阱垂直腔面发射激光器的自发发射谱和自发发射寿命，通过对半导体激光器传输函数的研究，发现缩短自发发射寿命是垂直腔面发射激光器实现高速调制响应的主要原因.     

光注入和光电反馈联合作用下垂直腔表面 发射激光器的动力学特性研究

基于自旋反转模型, 研究了垂直腔表面发射激光器(VCSEL) 在光注入和光电反馈共同作用下的动力学特性. 研究结果表明: 一个受到主VCSEL光注入的副VCSEL, 在同时存在光电正反馈时, 其输出的两个线偏振模式(X和Y偏振模) 可呈现周期、 倍周期、 多周期、 混沌等丰富的动力学状态, 且两偏振模动力学态的演化路径存在差异. 各动力学状态在由反馈强度f与注入强度η 所构成的参数空间的分布区域随着主、 副VCSEL 的频率失谐Δν(Δν=ν_m-ν_s, ν_m, ν_s 分别为主、 副VCSEL自由运行时的振荡频率) 的变化而发生改变. 当Δν为正失谐时, 呈现混沌的区域相比零失谐和负失谐时有明显的扩展, 即副VCSEL能在更大的参数范围内实现混沌输出. 对于特定的频率失谐, 分析了光电正反馈强度f和光注入强度η对混沌输出带宽的影响. 通过合理选择反馈强度以及注入强度, 可使副VCSEL混沌输出带宽显著增加.     

基于单向注入垂直腔面发射激光器系统的密钥分发

随机源对于信息理论安全的密钥分发至关重要,本文提出了一种基于单向注入垂直腔面发射激光器系统的密钥分发方案.首先基于单向注入的方式产生无时延特征的激光混沌信号,并通过单向注入驱动两个从激光器产生带宽增强的混沌同步信号.然后经过采样、量化以及异或等后处理,生成密钥流.数值仿真结果表明,在单阈值情况下,合法用户之间的误比特率低至1%左右,合法用户与窃听者之间的误比特率都高于10%;在双阈值情况下,误比特率可以低至10^-6.最后,对生成的密钥流进行了NIST随机性测试.该方案有效地增强了密钥分发的安全性.     

Modelocked quantum dot vertical external cavity surface emitting laser

We report the first successful modelocking of a vertical external cavity surface emitting laser (VECSEL) with a quantum dot (QD) gain region. The VECSEL has a total of 35 QD-layers with an emission wavelength of about 1060 nm. In SESAM modelocked operation, we obtain an average output power of 27.4 mW with 18-ps pulses at a repetition rate of 2.57 GHz. This QD-VECSEL is used as-grown on a 450 μm thick substrate, which limits the average output power.     

Polarization switching and synchronization of mutually coupled vertical-cavity surface-emitting semiconductor lasers

Polarization switching (PS) dynamics and synchronization performances of two mutually coupled vertical-cavity surface-emitting lasers (VCSELs) are studied theoretically in this paper. A group of dimensionless rate equations is derived to describe our model. While analysing the PS characteristics, we focus on the effects of coupling rate and frequency detuning regarding different mutual injection types. The results indicate that the x-mode injection defers the occurrence of PS, while the y-mode injection leads the PS to occur at a lower current. Strong enough polarization-selective injection can suppress the PS. Moreover, if frequency detuning is considered, the effects of polarization-selective mutual injection will be weakened. To evaluate the synchronization performance, the correlation coefficients and output dynamics of VCSELs with both pure mode and mixed mode polarizations are given. It is found that performance of complete synchronization is sensitive to the frequency mismatch but it is little affected by mixed mode polarizations, which is opposite to the case of injection-locking synchronization.     

Analytical modelling of end thermal coupling in a solid-state laser longitudinally bonded by a vertical-cavity top-emitting laser diode

The intrinsic features involving a circularly symmetric beam profile with low divergence, planar geometry as well as the increasingly enhanced power of vertical-cavity surface-emitting lasers (VCSELs) have made the VCSEL a promising pump source in direct end bonding to a solid-state laser medium to form the minimized, on-wafer integrated laser system. This scheme will generate a surface contact pump configuration and thus additional end thermal coupling to the laser medium through the joint interface of both materials, apart from pump beam heating. This paper analytically models temperature distributions in both VCSEL and the laser medium from the end thermal coupling regarding surface contact pump configuration using a top-emitting VCSEL as the pump source for the first time. The analytical solutions are derived by introducing relative temperature and mean temperature expressions. The results show that the end contact heating by the VCSEL could lead to considerable temperature variations associated with thermal phase shift and thermal lensing in the laser medium. However, if the central temperature of the interface is increased by less than 20~K, the end contact heating does not have a significant thermal influence on the laser medium. In this case, the thermal effect should be dominated by pump beam heating. This work provides useful analytical results for further analysis of hybrid thermal effects on those lasers pumped by a direct VCSEL bond.     

InGaAs/GaAs应变量子阱结构在1 054 nm激光器中的应用

采用金属有机物化学气相淀积（MOCVD）方法生长了InGaAs/GaAs应变量子阱,通过优化生长条件和采用应变缓冲层结构获得量子阱,将该量子阱结构应用于1 054 nm激光器的制备。经测试该器件具有9 mA低阈值电流和0.4 W/A较高的单面斜率效率,在驱动电流为50 mA时测得该应变量子阱光谱半宽为1.6 nm,发射波长为1 054 nm。实验表明:通过优化工艺条件和采用应变缓冲层等手段,改善了应变量子阱质量,该结果应用于1 054 nm激光器的制备,取得了较好的结果。     

Nonlinear dynamics of a directly modulated semiconductor laser with cavity detuning

A detailed numerical study of dynamical behavior of a semiconductor laser under current modulation and cavity detuning has been performed on the base of four different models of the active medium which take into account direct transitions between ground subbands, transitions with no k-selection rule between ground subbands and contribution of excited subbands in each of the above-mentioned cases. We have shown that different nonlinear regimes (period doubling, chaos, generalized bistability) can be obtained either with cavity detuning from the gain band maximum or near the laser threshold.It has been established that the shape and principal peculiarities of amplitude detuning characteristics are determined by the relation between the current modulation frequency and maximum resonance frequency of the laser.PACS numbers: 05.45.Pq, 42.55.Px, 42.65.Sf     

多横模垂直腔面发射激光器及其波长特性

基于氧化限制型内腔接触垂直腔面发射激光器(VCSEL) 结构设计, 研究了VCSEL的多横模分布及其模式波长分裂特性与氧化孔径尺寸、形状的关系. 在实验基础上, 通过建立有效折射率模型, 并利用标量亥姆霍兹方程的迭代算法理论, 分别对椭圆形氧化孔径和圆形氧化孔径VCSEL的横向模式特性进行模拟研究, 计算得到不同形状孔径的多横模光场分布情况, 同时测量得到高阶横模多频输出光谱. 研究发现, 椭圆氧化孔形状不仅影响横模分布特性, 还会导致每个模式的波长产生分裂, 分裂值可达0.037 nm. 同时, 随着氧化孔径的增大, 波长分裂影响会逐渐减小, 直至趋近于圆形氧化孔径的分布特性. 研究结果为进一步实现氧化限制型VCSEL的多横模锁定提供了有益参考和借鉴.     

各向异性光反馈注入的垂直表面发射激光器的矢量偏振模转换机理

数值研究了各向异性光反馈注入的垂直表面发射激光器(VCSEL)的矢量偏振模转换机理,研究结果表明,首先,当注入电流接近阈值电流时,由VCSEL的外部参数和偏振器控制的光反馈注入量中各偏振模的能量决定VCSEL 输出的偏振态.其次,由偏振器控制的各向异性光反馈注入引起的VCSEL输出偏振态呈周期性变化.另外,当由偏振器控制的反馈注入量中的x^偏振和y^偏振模能量相当时, x^偏振模和y^偏振模之间竞争激烈,而激光器外部微小的扰动都会打破这两种偏振模竞争 关键词： 各向异性光反馈 垂直表面发射激光器 矢量偏振模     

Rotational symmetry breaking in small-area circular vertical cavity surface emitting lasers

We investigate theoretically the dynamics of three low-order transverse modes in a small-area vertical cavity surface emitting laser. We demonstrate the spontaneous breaking of axial symmetry of the transverse field distribution in such a device. In particular, we show that if the linewidth enhancement factor is sufficiently large dynamical regimes with broken axial symmetry can exist up to very high diffusion coefficients ~ 10 μm²/ns.     

质子注入能量对垂直腔面发射激光器的阈值和功率的影响

文章研究了如何兼顾质子注入型垂直腔面发射激光器的功率和阈值性能.从模拟和实验两方面分析了质子注入能量与器件功率和阈值特性的关系.发现注入能量过高时,损伤有源区,降低了功率性能.而能量过低则会减弱对注入电流的限制,增加阈值.计算和实验结果表明,对于文中的器件结构,315 keV的注入能量是合适的.在10μm的注入孔径下获得器件的阈值为4.3 mA,功率为1.7 mW.