Mass spectrometry imaging of rat brain sections: nanomolar sensitivity with MALDI versus nanometer resolution by TOF–SIMS

Mass spectrometry imaging is becoming a more and more widely used method for chemical mapping of organic and inorganic compounds from various surfaces, especially tissue sections. Two main different techniques are now available: matrix-assisted laser desorption/ionizaton, where the sample, preliminary coated by an organic matrix, is analyzed by a UV laser beam; and secondary ion mass spectrometry, for which the target is directly submitted to a focused ion beam. Both techniques revealed excellent performances for lipid mapping of tissue surfaces. This article will discuss similarities, differences, and specificities of ion images generated by these two techniques in terms of sample preparation, sensitivity, ultimate spatial resolution, and structural analysis.     

Direct imaging of single cells and tissue at sub‐cellular spatial resolution using transmission geometry MALDI MS

The need of cellular and sub‐cellular spatial resolution in laser desorption ionization (LDI)/matrix‐assisted LDI (MALDI) imaging mass spectrometry (IMS) necessitates micron and sub‐micron laser spot sizes at biologically relevant sensitivities, introducing significant challenges for MS technology. To this end, we have developed a transmission geometry vacuum ion source that allows the laser beam to irradiate the back side of the sample. This arrangement obviates the mechanical/ion optic complications in the source by completely separating the optical lens and ion optic structures. We have experimentally demonstrated the viability of transmission geometry MALDI MS for imaging biological tissues and cells with sub‐cellular spatial resolution. Furthermore, we demonstrate that in conjunction with new sample preparation protocols, the sensitivity of this instrument is sufficient to obtain molecular images at sub‐micron spatial resolution. Copyright © 2012 John Wiley & Sons, Ltd.     

A study of gas-phase cationization in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

A specially constructed split sample probe was used to unequivocally demonstrate that gas-phase cationization occurs within the desorption plume during a matrix-assisted laser desorption/ionization experiment. Two separate samples were prepared for analysis: on side A, a mixture of poly(ethylene glycol) (PEG) 1500 analyte and 2,5-dihydroxybenzoic acid (DHB) matrix, and on side B a mixture of DHB matrix and lithium hydroxide (LiOH), the cationization reagent. Analysis of the data showed that when the ionization laser was focused on the split (so that both sides were illuminated), Li(+)-cationized PEG peaks were observed. Since the PEG analyte did not come into contact with Li(+) in either the solution or solid phase, the only possibility for the observed cationization was a reaction in the gas phase. Due to the difficulty in completely removing the adventitious cations (Na(+) and K(+)) present in DHB and on sample surfaces, gas-phase cationization could not be demonstrated to be either the only or most important mechanism operating in the MALDI experiment.     

Laser desorption/ionization mass spectrometry fingerprinting of complex hydrocarbon mixtures: application to crude oils using data mining techniques

Crude oil fingerprints were obtained from four crude oils by laser desorption/ionization mass spectrometry (LDI-MS) using a silver nitrate cationization reagent. Replicate analyses produced spectral data with a large number of features for each sample (>11,000 m/z values) which were statistically analyzed to extract useful information for their differentiation. Individual characteristic features from the data set were identified by a false discovery rate based feature selection procedure based on the analysis of variance models. The selected features were, in turn, evaluated using classification models. A substantially reduced set of 23 features was obtained through this procedure. One oil sample containing a high ratio of saturated/aromatic hydrocarbon content was easily distinguished from the others using this reduced set. The other three samples were more difficult to distinguish by LDI-MS using a silver cationization reagent; however, a minimal number of significant features were still identified for this purpose. Focus is placed on presenting this multivariate statistical method as a rapid and simple analytical procedure for classifying and distinguishing complex mixtures.     

The analysis of industrial synthetic polymers by electrospray droplet impact/secondary ion mass spectrometry

Electrospray droplet impact (EDI)/secondary ion mass spectrometry (SIMS) is a new desorption/ionization technique for mass spectrometry in which highly charged water clusters produced from the atmospheric‐pressure electrospray are accelerated in vacuum by several kV and impact the sample deposited on the metal substrate. In this study, several industrial synthetic polymers, e.g. polystyrene (PS) and polyethylene glycol (PEG) were analyzed by EDI/SIMS mass spectrometry. For higher molecular weight analytes, e.g. PS4000 and PEG4600, EDI/SIMS mass spectra could be obtained when cationization salts are added. For the polymers of lower molecular weights, e.g. PEG300 and PEG600, they could be readily detected as protonated ions without the addition of cationization agents. Anionized PS was also observed in the negative ion mode of operation when acetic acid was added to the charged droplet. Compared to matrix‐assisted laser desorption/ionization (MALDI), ion signal distribution with lower background signals could be obtained particularly for the low‐molecular weight polymers. Copyright © 2009 John Wiley & Sons, Ltd.     

MALDI-MS imaging of features smaller than the size of the laser beam

The feasibility of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) imaging of features smaller than the laser beam size has been demonstrated. The method involves the complete ablation of the MALDI matrix coating the sample at each sample position and moving the sample target a distance less than the diameter of the laser beam before repeating the process. In the limit of complete sample ablation, acquiring signal from adjacent positions spaced by distances smaller than the sample probe enhances image resolution as the measured analyte signal only arises from the overlap of the laser beam size and the non-ablated sample surface. Image acquisition of features smaller than the laser beam size has been demonstrated with peptide standards deposited on electron microscopy calibration grids and with neuropeptides originating from single cells. The presented MS imaging technique enables approximately 25 microm imaging spatial resolution using commercial MALDI mass spectrometers having irregular laser beam sizes of several hundred micron diameters. With appropriate sampling, the size of the laser beam is not a strict barrier to the attainable MALDI-MS imaging resolution.     

Two-Photon Photochemical Reactions of Aromatic Compounds in the Gas Phase

Studies on the gas-phase two-photon photochemistry of aromatic compounds performed in the past 25 years were summarized. Photophysical and photochemical unimolecular and bimolecular reactions occurring in the gas phase on the exposure of molecular systems (aliphatic aldehydes, ketones, and alcohols; aromatic hydrocarbons and their halogen derivatives; and heteroaromatic compounds with a conjugated -electron system) to pulsed laser UV radiation were considered. Data on the kinetics and mechanisms of primary two-photon photoexcitation, photodissociation, and photoionization of aromatic molecules were systematized, and the nature of electronically excited states responsible for these processes was determined. Data on the reactivity of transient species and on the kinetics of elementary steps of laser UV photolysis (bimolecular charge transfer and heavy particle transfer reactions and termolecular association and cluster ion formation reactions) were presented. General prerequisites to the stability of aromatic compounds under non-steady-state conditions of UV photolysis were found in accordance with the electronic structure of reactants and with the donor–acceptor properties of mixture components.     

Sample exposure effects in matrix-assisted laser desorption—ionization mass spectrometry of large biomolecules

Effects of sample exposure to UV laser irradiation on the matrix-assisted laser desorption—ionization (MALDI) mass spectra of different proteins are reported. The exposure is varied by irradiating the same sample spot with a differing number of UV laser pulses. The ion yield, mass resolution and internal energy content of ejected molecular ions are monitored as a function of the sample exposure. Other parameters that influence the MALDI spectra (and related to sample exposure) such as laser fluence, sample thickness, matrix-to-protein molar ratio, total deposited amount, and molecular mass of the protein, are also examined.     

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry studies of low molecular weight dendrimers

We report the application of matrix-assisted laser desorption/ionization time-of-flight (MALDI-ToF) mass spectrometry, with delayed extraction in the reflectron mode, for the characterization of low molecular weight dendrimers. 20 dendrimer samples were measured and 4 typical dendrimers, as examples, are discussed in detail. Several factors that affect the analysis including the matrices used, the concentrations of sample, the solvents and cationization reagent used, were investigated in detail. Experimental results indicate that the type of solvent can greatly influence exact mass measurement. However, sample preparation is generally not very critical for dendrimer analysis using MALDI-ToF since many kinds of matrices and a wide range of sample concentrations can be used efficiently. In addition, the Cs(+) ion can be used to enhance the efficiency of cationization. Some reasons for this behavior are discussed on the basis of results of calculations using Gaussian94 software (a connected system of programs for performing a variety of semi-empirical and ab initio molecular orbital (MO) calculations).     

Tryptamine: a Reactive Matrix for MALDI Mass Spectrometry

A possibility of using tryptamine as a reactive matrix for the analysis of non-polar carbonyl compounds by matrix-assisted laser desorption/ionization (MALDI) mass spectrometry has been shown. Presence of a terminal primary amine group in the tryptamine molecule predetermines the formation of Schiff bases from aliphatic and alicyclic carbonyl compounds. No additional matrix compounds are necessary to register MALDI mass spectra, because the excess of the derivatization agent plays the role of a matrix. MALDI mass spectra demonstrate high efficiency of desorption/ionization of the derivatives. To discover reactive matrices, a set of aromatic primary amines (mainly substituted anilines) has been tested, but they have not demonstrated matrix properties.     

Matrix-dependent cationization in MALDI mass spectrometry

The matrix dependence in cationization processes, the competition between cationization and protonation and the question of whether gas-phase cation transfer or attachment of free cations dominates in matrix-assisted laser desorption/ionization mass spectrometry were studied. Two different sample preparation methods were employed, the dried-droplet sample preparation and a mixture of solid matrix, analyte and salt. The latter ensures that the formation of cation adducts takes place in the gas phase. By monitoring the suppression of matrix signals for different matrices, it was found that matrices with high gas-phase metal ion binding energies require high analyte concentrations for matrix suppression to occur. By comparing the mass spectra obtained using sinapinic acid or sinapinic methyl ester as a matrix, a correlation between cationization and deprotonation of matrix molecules was found. It is also demonstrated that attachment of free gas-phase cations, rather than cation transfer from the cationized matrix, is the predominant process in cationization.     

Combining MALDI‐2 and transmission geometry laser optics to achieve high sensitivity for ultra‐high spatial resolution surface analysis

A transmission geometry optical configuration allows for smaller laser spot size to facilitate high‐resolution matrix‐assisted laser/desorption ionization (MALDI) mass spectrometry. This increase in spatial resolution (ie, smaller laser spot size) is often associated with a decrease in analyte signal. MALDI‐2 is a post‐ionization technique, which irradiates ions and neutrals generated in the initial MALDI plume with a second orthogonal laser pulse, and has been shown to improve sensitivity. Herein, we have modified a commercial Orbitrap mass spectrometer to incorporate a transmission geometry MALDI source with MALDI‐2 capabilities to improve sensitivity at higher spatial resolutions.     

Laser Desorption Ionization of Melamine and Identification of Fragmentation Channels from Ion Velocity Distribution Measurements

Fragmentation frequently accompanies intact laser desorption ionization of a parent non-volatile compound, desorption and dissociation dynamics has been a subject of intense studies over the past decade. As a preliminary lest system for future laser desorption study of energetic compounds such as explosives and propellents, we studied UV laser desorption ionization of melamine at a laser power density of approximately 4.4 MW/cm². Several gas-phase dissociation channels of the parent and fragment ions formed in UV laser desorption ionization of melamine films can be identified from their velocity distributions. A phenomenological desorption temperature of the order of 20000 K is estimated from fitting the experimental velocity distributions to Maxwellian functions.     

A high-performance bio-tissue imaging method using air flow-assisted desorption electrospray ionization coupled with a high-resolution mass spectrometer

An air flow-assisted desorption electrospray ionization (AFADESI) MSI device was combined with a highresolution mass spectrometer to optimize the system parameters and achieve more accurate spatial distribution characteristics for compounds of interest while investigating bio-tissue sections. Finally, the parameter conditions that can provide optimal ionic intensity and enhanced resolution were confirmed.     

Investigations of matrix-assisted laser desorption/ionization sample preparation by time-of-flight secondary ion mass spectrometry

Matrix-assisted laser desorption/ionization (MALDI) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) analyses are compared to gain insight into some of the details of sample preparation for MALDI analysis of synthetic polymers. ToF-SIMS imaging of MALDI samples shows segregation of the cationization agent from the matrix crystals. The amount of observed segregation can be controlled by the sample preparation technique. Electrospray sample deposition minimizes segregation. Comparing ToF-SIMS and MALDI mass spectra from the same samples confirms that ToF-SIMS is significantly more surface sensitive than MALDI. This comparison shows that segregation of the oligomers of a polymer sample can occur during MALDI sample preparation. Our data indicate that MALDI is not as sensitive to those species dominating the sample surface as to species better incorporated into the matrix crystals. Finally, we show that matrix-enhanced SIMS can be an effective tool to analyze synthetic polymers, although the sample preparation conditions may be different than those optimized for MALDI.     

Nanostructured diamine-fullerene derivatives: computational density functional theory study and experimental evidence for their formation via gas-phase functionalization

Nanostructure derivatives of fullerene C(60) are used in emerging applications of composite matrices, including protective and decorative coating, superadsorbent material, thin films, and lightweight high-strength fiber-reinforced materials, etc. In this study, quantum chemical calculations and experimental studies were performed to analyze the derivatives of diamine-fullerene prepared by the gas-phase solvent-free functionalization technique. In particular, the aliphatic 1,8-diamino-octane and the aromatic 1,5-diaminonaphthalene, which are diamines volatile in vacuum, were studied. We addressed two alternative mechanisms of the amination reaction via polyaddition and cross-linking of C(60) with diamines, using the pure GGA BLYP, PW91, and PBE functionals; further validation calculations were performed using the semiempirical dispersion GGA B97-D functional which contains parameters that have been specially adjusted by a more realistic view on dispersion contributions. In addition, we looked for experimental evidence for the covalent functionalization by using laser desorption/ionization time-of-flight mass spectrometry, thermogravimetric analysis, and atomic force microscopy.     

Development of a dual-spray electrospray deposition system for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

A new method of matrix-assisted laser desorption/ionization (MALDI) sample preparation using a dual-spray electrospray deposition system is demonstrated and employed for the investigation of gas-phase cationization reactions in the MALDI plume. The dual-spray electrospray system is found to increase the homogeneity of the sample similarly to that of a conventional single-spray electrospray system. The dual-spray electrospray system allows for intimate mixing of separately prepared sample components and results in improved quantitative results. The development of this device also leads to the possibility of mixing sample components prepared in different solvents without the need to be concerned with solvent miscibility.     

Evaluation of a new multiple-layer spotting technique for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry of synthetic polymers

A new multiple-layer matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) sample-spotting technique is described. This fast and easy technique was evaluated with poly(ethylene glycol) (PEG) standards and optimized conditions for these synthetic polymers were obtained. PEGs up to 35 kDa were detectable with this approach and single monomer resolution was observed up to 20 kDa. The spotting was performed using a multiple-layer approach, which offers the capability of complex sample preparation without the requirement of premixing the different matrix, analyte and doping salt solutions. The technique reduces the time required for sample preparation and offers high flexibility with respect to sample composition and solvents utilized for the crystallization of the compounds. The technique is thus perfectly suited for applications in combinatorial material research.     

High-resolution atmospheric pressure infrared laser desorption/ionization mass spectrometry imaging of biological tissue

An atmospheric pressure laser desorption/ionization mass spectrometry imaging ion source has been developed that combines high spatial resolution and high mass resolution for the in situ analysis of biological tissue. The system is based on an infrared laser system working at 2.94 to 3.10 μm wavelength, employing a Nd:YAG laser-pumped optical parametrical oscillator. A Raman-shifted Nd:YAG laser system was also tested as an alternative irradiation source. A dedicated optical setup was used to focus the laser beam, coaxially with the ion optical axis and normal to the sample surface, to a spot size of 30 μm in diameter. No additional matrix was needed for laser desorption/ionization. A cooling stage was developed to reduce evaporation of physiological cell water. Ions were formed under atmospheric pressure and transferred by an extended heated capillary into the atmospheric pressure inlet of an orbital trapping mass spectrometer. Various phospholipid compounds were detected, identified, and imaged at a pixel resolution of up to 25 μm from mouse brain tissue sections. Mass accuracies of better than 2 ppm and a mass resolution of 30,000 at m/z?=?400 were achieved for these measurements.

Electron ionization and field desorption mass spectrometry of some macrocyclic crown ether-lactones

The electron impact (ED mass spectra of fourteen macrocyclic crown ether-lactone (involving aliphatic and aromatic groups) were reported, and some typical EI fragmentation patterns were discussed in detail with the aid of exact mass measurement, linked scan and defocussing technique. The features of the field desorption (FD) mass spectra of ten compounds were also summarized.