金属配合物和一氧化碳的反应

一氧化碳是发展可持续化学经济的重要原料。人们希望能够将一氧化碳催化转变成高附加值化学品,从而减少石油等化石资源对人类的束缚。研究均相金属配合物与一氧化碳的反应能够使人们了解一氧化碳转变及利用机理,并开发新催化剂高效地利用一氧化碳资源。本文从金属配合物与一氧化碳反应的活性点出发,分别讨论不同类型的金属配合物与一氧化碳的反应,以求让人们在分子水平上了解一氧化碳的基本反应原理;并总结了该领域存在的难点问题,展望了未来,希望更多的科研工作者投入其中,从而实现利用一氧化碳合成出各种各样的化学品和材料。     

Evolution of carbonylation catalysis: no need for carbon monoxide

Progress in organometallic catalysis began with the discovery of the Roelen reaction (hydroformylation with carbon monoxide and hydrogen) in 1938 and the Reppe reaction (hydrocarboxylation with carbon monoxide and water) in 1939. Since then, carbonylation chemistry by using carbon monoxide has occupied a central position in organometallic chemistry, as it relates to organic synthesis. There is, however, the problem of using gaseous carbon monoxide (a toxic greenhouse gas) in this chemistry. Recently, some strategies that address this issue have appeared. This minireview describes carbonylation reactions that can be conducted without the direct use of carbon monoxide. These carbonylation reactions provide reliable and accessible tools for synthetic organic chemists.     

载铜活性炭吸附一氧化碳的密度泛函理论计算

应用密度泛函理论和相对论有效核势方法, 用C₁₆H₁₀, C₁₃H₉, C₁₂H₁₂原子簇模型模拟活性炭表面, 计算得到了CO在载铜活性炭上的吸附位、吸附构型和吸附能. 研究表明: 载铜活性炭吸附CO的过程, 本质上是Cu(I)通过σ-π配键与CO络合, 形成Cu—C键的过程. 载铜活性炭对CO的络合吸附能在50～60 kJ/mol之间, 远大于活性炭对CO的物理吸附能(9.15 kJ/mol), 因而络合吸附更稳定, 选择性也更高. Cu(I)选择吸附在活性炭表面的顶位和桥位, 一个Cu(I)至多可以吸附一个到两个CO分子, 但吸附一个CO比吸附两个CO稳定.     

镍铝催化剂吸附动力学参数的非线性动态分析

在推导出适应于甲烷化反应体系非线性动态分析不同吸附物种动力学参数模型的基础上，采用计算优化出工业镍铝甲烷化催化剂上可逆吸附氢和可逆吸附一氧化碳的吸附速率常数和吸附平衡常数。结果表明，镍铝催化剂上吸附可逆氢要比吸附一氧化碳快２．２倍左右。该结果为镍铝催化剂上甲烷化产物的生成主要依赖于一氧化碳的吸附这一判断提供了理论依据。由于镍铝催化剂上甲烷化是可逆吸附氢与不可逆吸附一氧化碳共同作用的结果，且不可逆吸     

铜锌催化剂上吸附动力学参数的非线性动态分析

本文得到了适应于一氧化碳加氢加压体系非线性动态分析不同吸附物种动力学参数的模型，并优化出工业铜锌催化剂上合成甲醇反应中可逆吸附氢和可逆吸附一氧化碳的吸附速率常数及吸附平衡常数。结果表明：铜锌催化剂上吸附可逆氢比吸附一氧化碳快７倍左右。由于铜锌催化剂上甲醇的生成是可逆吸附氢与可逆吸附一氧化碳共同作用的结果，且铜锌催化剂 可逆吸一氧化碳的表面浓度随气相一氧化碳分压的增加而增加，因而加压将有利于合成甲醇     

A rapid spectrophotometric method for the determination of carbon monoxide in ambient air

A sensitive spectrophotometric method for the determination of carbon monoxide is described, based on the reduction of palladium(II) by carbon monoxide. The resulting elemental palladium is reacted with iodate in acidic medium in the presence of chloride, to produce an ICl(-)(n) species that is readily extracted as an ion-pair with Pyronine-G into benzene. Measurement of the absorbance of the extract at 535 nm permits the determination of carbon monoxide down to 1 mul/l. in air. The effect of interfering gases is discussed. The method is suitable for determination of carbon monoxide in motor vehicle exhaust gases and ambient air.     

Influence of chemisorbed carbon monoxide on hydrogen evolution at smooth platinum electrodes in sulfuric acid solution

Cathodic current—potential curves were measured potentiostatically on two smooth platinum electrodes of different shape in 0.5 M H₂SO₄ at room temperature in the presence of chemisorbed carbon monoxide. Coverages of carbon monoxide between 0 and 0.6 lead to a relatively small decrease of the current density at constant hydrogen overvoltage. Mass transport processes remain largely rate-controlling. A rapid decrease of current follows, with a further increase of the carbon monoxide coverage. A transition from mass transport to kinetic control takes place. The rapid decrease is followed by a slower decrease at coverages above 0.85. This leveling-off results from hydrogen evolution on top of the chemisorbed layer of carbon monoxide. The retarding effect of chemisorbed carbon monoxide on hydrogen evolution is compared with the similar effect on hydrogen dissolution for the same electrodes.     

Thermal degradation of polymers with phenylene units in the chain. IV. Aromatic polyamides and polyimides

The breakdown mechanism of an aromatic polyamide and four polyimides has been studied under vacuum in the temperature range of 375–620°C, by using techniques described earlier, involving collection and analysis of volatile products as well as analyses of residues at different temperatures. The decomposition of the polyamide up to 375°C yielded predominantly carbon dioxide, while between 375 and 450°C about equal amounts of carbon dioxide and carbon monoxide formed. Hydrogen is the major product between 450 and 550°C, along with hydrogen cyanide, methane, and carbon monoxide. The major reaction at the lower temperatures seems to be the cleavage of the linkage between the carbonyl group and the ring, with subsequent formation of a carbodiimide linkage via isocyanate intermediates, and liberation of carbon dioxide. Alternatively, cleavage between the carboxyl and the NH-group leads to the formation of carbon monoxide. Carbon dioxide and carbon monoxide are also the major volatile decomposition products of the polyimides at the lower temperatures. The primary cleavage reaction is believed to be the rupture of the imide ring between a carbonyl and nitrogen, with subsequent formation of isocyanate groups. The latter react with each other to form carbodiimide linkages and carbon dioxide, while the remaining benzoyl radical is the source for carbon monoxide.     

一氧化碳、氢、甲醇和正乙烷体系的分子模拟

钟炳等将超临界流体引入固定床反应器进行催化分离一体化合成甲醇的研究,取得了良好的效果［１］．对于一氧化碳加氢合成甲醇这一体系,文献报导的相平衡实验数据十分缺乏,ＤｅＬｏｏｓ［２］和Ｚａｗｉｓｚａ［３］仅对甲醇和正己烷二元体系的相行为进行了研究．对于合...     

Continuous production of mixed alcohols and acids from carbon monoxide

Continuous, steady-state fermentations using carbon monoxide gas as the sole carbon and energy source have been achieved with the CO strain ofButyribacterium methylotrophicum. Fermentation pH was found to regulate carbon monoxide metabolism over the pH range of 6.8 to 5.0. Cell growth diminished at low pH, with washout occurring at pH 5.0. As observed previously in batch culture, lower pH values favored production of butyrate over acetate. The mechanism responsible for this trend is currently being investigated by quantification of key intracellular enzyme activities. At low pH values, direct, steady-state fermentation of carbon monoxide to alcohols has been verified. Of major significance is the production of butanol from carbon monoxide in pure culture. This newly identified pathway provides a potential mechanism for direct bioconversion of synthesis gas to butanol.     

焦炭反应性与反应过程中CO气体成分相关性的探讨

焦炭反应性试验过程中二氧化碳与焦炭反应生成一氧化碳和残余的二氧化碳。因而反应过程中一氧化碳的含量与反应中消耗的焦炭（焦炭反应性）有必然的联系。通过对反应性试验过程中一氧化碳气体含量的测定,结果表明：反应中一氧化碳气体含量(y)与焦炭反应性结果(x)的曲线几乎平行,两者之间存在较强的相关性,并判定出y=kx+b(k、b为常数)。以此来提前预知焦炭反应性,结果较为满意。     

Simple thermometric appratus for the estimation of carbon monoxide in air

A simple, inexpensive apparatus is described for estimating the amount of carbon monoxide in air over a range of concentration from 0.01 to 0.1% or higher, with an accuracy of 0.005 to 0.01%. Thc carbon monoxide is oxidised by passing through a layer of Hopcalite catalyst at room temperature, and the rise in temperature of the air stream due to the heat of combustion is measured with a thermometer. About 60% of the theoretically possible temperature rise is actually observed with the apparatus. By means of a calibration chart, the concentration of carbon monoxide present is read as a function of the temperature increase.     

Formation of carbon oxides during tobacco combustion: Pyrolysis studies in the presence of isotopic gases to elucidate reaction sequence

During the combustion of tobacco, carbon monoxide is formed by the thermal decomposition of tobacco with primary products such as carbon dioxide and water. These three processes occur in parallel and are interdependent. The temperature ranges over which each process occurs, and their relative importance have been assessed by pyrolysing tobacco in the presence of various isotopically labelled gases. Non-isothermal pyrolyses were conducted at a heating rate of 1.6 K s^?1 up to 1000°C, with the products analysed by mass spectrometer.Pyrolysis in the presence of oxygen-18 indicates that combustion of tobacco starts at 180°C. Carbon dioxide and water are formed by combustion at 180°C, while carbon monoxide is not formed as a combustion product until 460°C. The quantities of carbon monoxide and dioxide formed by thermal decomposition of tobacco above 400°C are significantly reduced by the occurrence of combustion.Pyrolysis in the presence of carbon-13 dioxide or carbon dioxide-18 shows that its major reaction, endothermic reduction to form carbon monoxide begins at 450°C. Pyrolysis in an oxygen-18/carbon-13 dioxide atmosphere has shown that this endothermic reduction of carbon dioxide occurs in parallel with the strongly exothermic oxidising reactions. 30% of the total carbon monoxide formed was produced by thermal decomposition of the tobacco. 36% was produced by combustion of the tobacco, and at least 23% was produced via carbon dioxide. The remainder was produced by an interaction of the carbon dioxide reduction and the oxidation. Similar proportion would be expected inside the reaction zone of a burning cigarette.Pyrolysis in the presence of heavy water has shown that the major reaction of the water is to quantitatively produce carbon monoxide and hydrogen above 600°C. Considerable isotopic exchange reactions also occur. Pyrolysis in the presence of carbon monoxide-18 has shown that carbon monoxide reacts with tobacco to a small extent at temperatures above 220°C mainly to abstract oxygen combined in the tobacco and produce carbon dioxide.A sequence of general chemical steps for the production of the carbon oxides and water during tobacco combustion has been deduced. This is based on the present work together with considerations of previously published studies on graphite and coal reactions.     

氢气存在下一氧化碳偶联反应的化学和性能

实验研究了在氢气存在下，一氧化碳与亚硝酸乙酯偶联合成草酸二乙酸反应体系在典型操作条件下的化学反应和反应性能，结果表明氢气只与反应体系中的亚硝酸乙酯反应生成乙醇。由于氢气与一氧化碳在催化剂表面竞争吸附，并且氢的存在打破了生成草酸二乙酯所必需的正常的氧化还原过程：Pd^0→Pd^2 →Pd^0，因此氢的引入使一氧化碳转化率及草酸二乙酯选择性下降。此外，化学吸附测试结果表明氢气和一氧化碳是在催化剂表面同一活性中心上吸附。     

Effect of CO on surface oxidation of uranium metal

The surface reactions of uranium metal with carbon monoxide at 25 and 200 °C have been studied by X-ray photoelectron spectroscopy (XPS); respectively. Adsorption of carbon monoxide on the surface layer of uranium metal leads to partial reduction of surface oxide and results in U4f photoelectron peak shifting to the lower binding energy. The content of oxygen in the surface oxide is decreased and O1s/O4f ratio decreases with increasing the exposure of carbon monoxide. The investigation indicates the surface layer of uranium metal has resistance to further oxidation in the atmosphere of carbon monoxide.     

Concentration technique for determination of air pollutants at sub-micro level. A new technique for concentration of carbon monoxide.

The advantages, scope and limitations of a step-wise technique for concentrating permanent gases, particularly carbon monoxide, up to 2000 times before gas chromatographic, spectrophotometric or mass spectrometric determination are described. Determination of less than 0.01 ppm of carbon monoxide has been carried out with an error of +/-10% by using this pre-concentration technique, followed by gas chromatography, with catalytic conversion of the carbon monoxide into methane before flame ionisation detection. The system used without pre-concentration could not detect less than 1 ppm of carbon monoxide.     

Coupling of Carbon Monoxide with Nitrogen Monoxide at a Frustrated Lewis Pair Template

Coupling of carbon monoxide with nitrogen monoxide was achieved at a frustrated Lewis pair template. This unique reaction uses hydride as an auxiliary, which reductively activates carbon monoxide at the frustrated Lewis pair. The CO/NO coupling reaction then takes place through a pathway involving a radical reaction in which the hydrogen atom auxiliary is eventually removed again.     

An Operando FTIR Spectroscopic and Kinetic Study of Carbon Monoxide Pressure Influence on Rhodium‐Catalyzed Olefin Hydroformylation

The influence of carbon monoxide concentration on the kinetics of the hydroformylation of 3,3‐dimethyl‐1‐butene with a phosphite‐modified rhodium catalyst has been studied for the pressure range p(CO)=0.20–3.83 MPa. Highly resolved time‐dependent concentration profiles of the organometallic intermediates were derived from IR spectroscopic data collected in situ for the entire olefin‐conversion range. The dynamics of the catalyst and organic components are described by enzyme‐type kinetics with competitive and uncompetitive inhibition reactions involving carbon monoxide taken into account. Saturation of the alkyl–rhodium intermediates with carbon monoxide as a cosubstrate occurs between 1.5 and 2 MPa of carbon monoxide pressure, which brings about a convergence of aldehyde regioselectivity. Hydrogenolysis of the acyl intermediate is fast at 30 °C and low pressure of p(CO)=0.2 MPa, but is of minus first order with respect to the solution concentration of carbon monoxide. Resting 18‐electron hydrido and acyl complexes that correspond to early and late rate‐determining states, respectively, coexist as long as the conversion of the substrate is not complete.     

Matrix isolation spectroscopic and theoretical study of carbon dioxide activation by titanium oxide molecules

The reactions of titanium monoxide and dioxide molecules with carbon dioxide were investigated by matrix isolation infrared spectroscopy. It was found that the titanium monoxide molecule is able to activate carbon dioxide to form the titanium dioxide-carbon monoxide complex upon visible light excitation via a weakly bound TiO(η(1)-OCO) intermediate in solid neon. In contrast, the titanium dioxide molecule reacted with carbon dioxide to form the titanium monoxide-carbonate complex spontaneously on annealing. Theoretical calculations predicted that both activation processes are thermodynamically exothermic and kinetically facile.     

Energy characteristics of poly(olefin ketone) surfaces at different interfaces

The energy characteristics of surfaces of new polymers belonging to the class of poly(olefin ketone)s at the interfaces with air and polar (water) and nonpolar (octane) liquids were determined by the ?ontact angle method. The objects of the study were binary copolymer (propyl-ene—carbon monoxide, PCO) and ternary copolymers (propylene—carbon monoxide—ethyl-ene—carbon monoxide, PECO; but-1-ene—carbon monoxide—ethylene—carbon monoxide, BECO). It was shown that the ternary copolymers can be recommended for further medicobio-logical tests as a base for the development of hemocompatible materials. The equilibrium values of the interfacial energy of poly(olefin ketone)s at the interfaces with water and octane make it possible to predict their adhesion properties for designing composite materials.