首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Physicochemical properties of aqueous micellar solutions may change in the presence of ionic liquids (ILs). Micelles help to increase the aqueous solubility of ILs. The average size of the micellar aggregates within aqueous sodium dodecylbenzene sulfonate (SDBS) is observed by dynamic light scattering (DLS) and transmission electron microscopy (TEM) to increase in a sudden and drastic fashion as the IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) is added. Similar addition of [bmim][PF(6)] to aqueous sodium dodecyl sulfate (SDS) results in only a slow gradual increase in average aggregate size. While addition of the IL [bmim][BF(4)] also gives rise to sudden aggregate size enhancement within aqueous SDBS, the IL 1-ethyl-3-methylimidazolium tetrafluoroborate ([emim][BF(4)]), and inorganic salts NaPF(6) and NaBF(4), only gradually increase the assembly size upon their addition. Bulk dynamic viscosity, microviscosity, dipolarity (indicated by the fluorescent reporter pyrene), zeta potential, and electrical conductance measurements were taken to gain insight into this unusual size enhancement. It is proposed that bmim(+) cations of the IL undergo Coulombic attractive interactions with anionic headgroups at the micellar surface at all [bmim][PF(6)] concentrations in aqueous SDS; in aqueous SDBS, beyond a critical IL concentration, bmim(+) becomes involved in cation-π interaction with the phenyl moiety of SDBS within micellar aggregates with the butyl group aligned along the alkyl chain of the surfactant. This relocation of bmim(+) results in an unprecedented size increase in micellar aggregates. Aromaticity of the IL cation alongside the presence of sufficiently aliphatic (butyl or longer) alkyl chains on the IL appear to be essential for this dramatic critical expansion in self-assembly dimensions within aqueous SDBS.  相似文献   

2.
The phase behavior of toluene/Triton X-100 (TX-100)/1-butyl-3-methylimidazolium hexafluorophosphate([bmim][PF6]) was studied. It was demonstrated that the single-phase microemulsion area covered about 75% of the phase diagram at 25 °C. Electrical conductivities of the system with different w ([bmim][PF6]-to-TX-100 molar ratio) values were determined, and the results were used to locate the sub-regions of the single-phase microemulsion. The results showed that a transform from [bmim][PF6]-in-oil ([bmim][PF6]/O) microstructure via a bicontinuous region to an oil-in-[bmim][PF6] (O/[bmim][PF6]) microstructure occurred with the increase of Φ (weight fraction of TX-100 and [bmim][PF6] in the system). The aggregate size of the reverse microemulsions of [bmim][PF6]/O was determined using small-angle X-ray scattering. The results showed that the size of the reverse microemulsions depended markedly on the w values.  相似文献   

3.
Modification of important physicochemical properties of aqueous surfactant solutions can be achieved by addition of environmentally benign room temperature ionic liquids (ILs). While low aqueous solubility of "hydrophobic" ILs limits the amount of IL that may be added to achieve desired changes in the physicochemical properties, hydrophilic ILs do not have such restrictions associated to them. Alterations in the key physicochemical properties of aqueous solutions of a common nonionic surfactant Triton X-100 (TX100) on addition of up to 30 wt % hydrophilic IL 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) are reported. The presence of micellar aggregates in as high as 30 wt % [bmim][BF4]-added aqueous TX100 solutions is established by dynamic light scattering and fluorescence probe behavior. Increasing the concentration of [bmim][BF4] results in decrease in average micellar size and aggregation number and increase in critical micelle concentration, indicating an overall unfavorable aggregation process. Increase in the dipolarity and the microfluidity of the probe cybotactic region within the palisade layer of the micellar phase upon [bmim][BF4] addition implies increased water penetration and the possibility of TX100-[bmim][BF4] interactions. While the changes in some of the physicochemical properties indicate the role of [bmim][BF4] to be similar to a cosurfactant, the IL acts like a cosolvent as far as changes in other properties are concerned. Effectiveness of IL [bmim][BF4] in modifying physicochemical properties of aqueous TX100 is demonstrated.  相似文献   

4.
1-Butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) is one of the promising room-temperature ionic liquids. To test the refined force field for [bmim][BF4] proposed in our previously work (J. Phys. Chem. B, 2004, 108, 12978-12989), thermodynamic properties of mixtures of [bmim][BF4](1)+ acetonitrile (2) are presented by using molecular dynamics over the whole concentration range. The calculated densities are in good agreement with the experimental data with deviations less than 2%, indicating the force field is applicable to the mixtures. In addition, the diffusion constants, viscosities, heats of vaporization, cohesive energy densities and excess properties of the mixtures are reported. The microscopic structures are discussed in detail, corresponding to the thermodynamic properties.  相似文献   

5.
The steady-state fluorescence spectra and molecular dynamics simulations were explored to investigate the temperature dependent organization in some imidazolium ionic liquids:1-butyl-3-methylimidazolium hexafluo-rophosphate([bmim][PF6]),1-ethyl-3-methylimidazolium ethylsulfate([emim][EtSO4]) and 1-butyl-3-methylimida-zolium tetrafluoroborate([bmim][BF4]).The pure room temperature ionic liquids(ILs) exhibit a large red shift at more than an excitation wavelength of around 340 nm,which demonstrates the hetero...  相似文献   

6.
The group contribution equation of state (GC-EOS) was applied to predict the phase behavior of binary systems of ionic liquids of the homologous families 1-alkyl-3-methylimidazolium hexafluorophosphate and tetrafluoroborate with CO2. Pure group parameters for the new ionic liquid functional groups [-mim][PF6] and [-mim][BF4] and interaction parameters between these groups and the paraffin (CH3, CH2) and CO2 groups were estimated. The GC-EOS extended with the new parameters was applied to predict high-pressure phase equilibria in binary mixtures of the ionic liquids [emim][PF6], [bmim][PF6], [hmim][PF6], [bmim][BF4], [hmim][BF4], and [omim][BF4] with CO2. The agreement between experimental and predicted bubble point data for the ionic liquids was excellent for pressures up to 20 MPa, and even for pressures up to about 100 MPa, the agreement was good. The results show the capability of the GC-EOS to describe phase equilibria of systems consisting of ionic liquids.  相似文献   

7.
利用非等温、等温热重分析(TG)法,研究了高纯氮气气氛下1-丁基-3-甲基咪唑四氟硼酸盐([bmim][BF4])离子液体的热稳定性、平衡蒸汽压和标准蒸发焓.非等温热重(TG)曲线表明[bmim][BF4]的初始分解温度(Tonset)和最大分解速率对应的温度(Tm)分别为697和734K.然而长期等温TGA研究表明,[bmim][BF4]的最高可使用温度约为513K.另外,利用基于TG的蒸发技术研究了[bmim][BF4]的平衡蒸汽压(pe)与温度的关系并计算了标准蒸发焓.在503-543K温度范围内,离子液体[bmim][BF4]的pe和温度的关系是:lgpe=(16±1)+(-6.85±0.25)×103/T.[bmim][BF4]的标准蒸发焓为(131±5)kJ·mol-1.  相似文献   

8.
We have continued the study of halide nucleophilicity in ionic liquids, concentrating on the effect of changing the anion ([BF(4)](-), [PF(6)](-), [SbF(6)](-), [OTf](-), and [N(Tf)(2)](-)) when the cation is [bmim](+) (where bmim = 1-butyl-3-methylimidazolium). It was found that the nucleophilicities of all the halides were lower in all of the ionic liquids than in dichloromethane. Changing the anion affected the order of halide nucleophilicity, e.g., in [bmim][BF(4)] the order of nucleophilicity was Cl(-)>Br(-)>I(-) while in [bmim][N(Tf)(2)] the order was Cl(-)相似文献   

9.
The interaction of water with room temperature ionic liquid (RTIL) [bmim][PF6] has been studied in [bmim][PF6]/TX-100/water ternary microemulsions by solvent and rotational relaxation of coumarin 153 (C-153) and coumarin 490 (C-490). The rotational relaxation and average solvation time of C-153 and C-490 gradually decrease with increase in water content of the microemulsions. The gradual increase in the size of the microemulsion with increase in w0 (w0=[water]/[surfactant]) is evident from dynamic light scattering measurements. Consequently the mobility of the water molecules also increases. In comparison to pure water the retardation of solvation time in the RTIL containing ternary microemulsions is very less. The authors have also reported the solvation time of C-490 in neat [bmim][PF6]. The solvation time of C-490 in neat [bmim][PF6] is bimodal with time constants of 400 ps and 1.10 ns.  相似文献   

10.
王冠石  王小永 《化学通报》2017,80(8):777-782,771
添加离子液体会对表面活性剂在水溶液中的聚集行为产生重要影响。本文研究了吐温-20在中低浓度离子液体四氟硼酸1-丁基-3-甲基咪唑鎓([bmim][BF_4])中的胶束化行为。随着[bmim][BF_4]浓度(cIL)从0增加到0.2mol·L~(-1),吐温-20的临界胶束浓度逐渐增大。相比cIL0.05mol·L~(-1),在cIL0.05mol·L~(-1)时加入[bmim][BF_4]使吐温-20临界胶束浓度增大得更加显著。吐温-20胶束聚集数随着离子液体浓度的增加而逐渐减小,这一结果也说明加入离子液体会对吐温-20胶束的生成有抑制作用。吐温-20胶束化热力学研究表明,吐温-20在不同浓度离子液体中的胶束化是熵、焓共同驱动,并具有熵-焓补偿性。随着离子液体浓度的增加,吐温-20胶束平均粒径和胶束微粘性均表现出先增大后减小的变化,在cIL=0.05mol·L~(-1)时达到最大值。  相似文献   

11.
Modifying physicochemical properties of aqueous surfactant solutions in favorable fashion by addition of environmentally benign room-temperature ionic liquids (ILs) has enormous future potential. Due to its unusual properties, an IL may demonstrate a unique role in altering the properties of aqueous surfactant solutions. Changes in the properties of aqueous sodium dodecyl sulfate (SDS), an anionic surfactant, upon addition of a common and popular "hydrophilic" ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF4] are presented. Addition of low concentrations of [bmim][BF4] (i.e., 相似文献   

12.
Modifying properties of aqueous surfactant solutions by addition of external additives is an important area of research. Unusual properties of ionic liquids (ILs) make them ideal candidates for this purpose. Changes in important physicochemical properties of aqueous zwitterionic N-dodecyl- N, N-dimethyl-3-ammonio-1-propanesulfonate (SB-12) surfactant solution upon addition of hydrophilic IL 1-butyl-3-methylimidazolium tetrafluoroborate, [bmim][BF 4], are reported. Dynamic light scattering results indicate a dramatic reduction in the average micellar size in the presence of [bmim][BF 4]; micellar (or micelle-like) aggregation in the presence of as high as 30 wt % [bmim][BF 4] is confirmed. Responses from fluorescence probes are used to obtain critical micelle concentration (cmc), aggregation number ( N agg), and dipolarity and microfluidity of the micellar pseudophase of aqueous SB-12 in the presence of [bmim][BF 4]. In general, increasing the amount of [bmim][BF 4] to 30 wt % results in decrease in N agg and increase in cmc. Increase in the dipolarity and the microfluidity of the probe cybotactic region within the micellar pseudophase is observed on increasing [bmim][BF 4] concentration in the solution. It is attributed to increased water penetration into the micellar pseudophase as [bmim][BF 4] is added to aqueous SB-12. It is proposed that IL [bmim][BF 4] behaves similar to an electrolyte and/or a cosurfactant when present at low concentrations and as a polar cosolvent when present at high concentrations. Electrostatic attraction between cation of IL and anion of zwitterion, and anion of IL and cation of zwitterion at low concentrations of [bmim][BF 4] is evoked to explain the observed changes. Presence of IL as cosolvent appears to reduce the efficiency of micellization process by reducing the hydrophobic effect.  相似文献   

13.
The amino induced elimination of benzisoxazole into the relevant o-cyanophenolate ion (Kemp elimination) has been studied in [bmim][BF 4] solution at 298 K. To have information about the interactions between reactants and ionic liquid, the reaction has been carried out at different temperatures (293-313 K). Several primary, secondary, and tertiary amines have been used to study the effect of amine structure on the reaction rate. The collected data show that the amine structure seems to have a crucial role in determining the reaction rate. Furthermore, as different cation or anion structures of an ionic liquid can significantly affect its properties, the title reaction has been performed in four different ionic liquids ([bmim][PF6], [bmim][NTf 2], [bm 2im][NTf 2], and [bmpyrr][NTf 2]), using pyrrolidine and piperidine as model amines. An H-donor negative solvent (MeOH and [bmim][NTf 2]) effect on reaction rate was detected. Finally, a narrow range of activation parameters was calculated both for the reaction induced by different amines and for pyrrolidine and piperidine, in the presence of different ILs. This fact suggests the occurrence of an "early" transition state.  相似文献   

14.
The kinetics of the nucleophilic aromatic substitution of some 2-L-5-nitrothiophenes (para-like isomers) with three different amines (pyrrolidine, piperidine, and morpholine) were studied in three room-temperature ionic liquids ([bmim][BF4], [bmim][PF6], and [bm(2)im][BF4], where bmim = 1-butyl-3-methylimidazolium and bm(2)im = 1-butyl-2,3-dimethylimidazolium). To calculate thermodynamic parameters, a useful instrument to gain information concerning reagent-solvent interactions, the reaction was carried out over the temperature range 293-313 K. The reaction occurs faster in ionic liquids than in conventional solvents (methanol, benzene), a dependence of rate constants on amine concentration similar to that observed in methanol, suggesting a parallel behavior. The above reaction also was studied with 2-bromo-3-nitrothiophene, an ortho-like derivative able to give peculiar intramolecular interactions in the transition state, which are strongly affected by the reaction medium.  相似文献   

15.
Synthesis of trans-aconitic acid molecularly imprinted polymers in [bmim][BF4] and [bmim][PF6] under photochemical (5 degrees C, AIBN) and thermal (60 degrees C, AIBN) conditions gave polymer micro-spheres (<200 nm), under bulk and precipitation polymerisation conditions, and higher selectivity indices (100% improvement) relative to the more traditional precipitation polymerisation (CH3CN, high solvent volumes) approach.  相似文献   

16.
利用纳秒级激光光解瞬态吸收光谱研究了联苯甲酰(BZ)在离子液体1-丁基-3-甲基咪唑四氟硼酸盐([bmim][BF4])与乙腈(MeCN)混合体系中的光化学反应行为. 考察了探针分子BZ存在下[bmim][BF4]/MeCN比例对体系中化学反应动力学的影响. 实验发现: 在N2饱和条件下, BZ溶液经激光辐照后产生的激发三线态3BZ*遵循一级反应动力学规律衰减. 离子液体(IL)相对比例增加对3BZ*瞬态吸收峰的位置和强度没有产生明显影响. 但离子液体体积分数VIL的变化对[bmim][BF4]/MeCN混合溶剂中光诱导电子转移的影响却非常显著, 总体上电子转移产生的自由基的表观生成速率常数kgr随[bmim][BF4]的VIL增大而减小. 在[bmim]BF4]比例足够大的情况下, 3BZ*与三乙胺或四甲基对苯二胺之间的电子转移被抑制.  相似文献   

17.
Novel microemulsions: ionic liquid-in-ionic liquid   总被引:2,自引:0,他引:2  
The hydrophobic IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) can be dispersed in hydrophilic IL propylammonium formate (PAF) with the aid of surfactant AOT, and [bmim][PF(6)]-in-PAF microemulsions are formed.  相似文献   

18.
The behavior of the ionic liquid (IL) 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][Tf(2)N]) entrapped in two reverse micelles (RMs) formed in an aromatic solvent as dispersant pseudophase: [bmim][Tf(2)N]/benzyl-n-hexadecyldimethylammonium chloride (BHDC)/chlorobenzene and [bmim][Tf(2)N]/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/chlorobenzene, was investigated using dynamic light scattering (DLS), FT-IR and (1)H NMR spectroscopies. DLS results reveal the formation of RMs containing [bmim][Tf(2)N] as a polar component since the droplet size values increase as the W(s) (W(s) = [[bmim][Tf(2)N]]/[surfactant]) increases. Furthermore, it shows that the RMs consist of discrete spherical and non-interacting droplets of [bmim][Tf(2)N] stabilized by the surfactants. Important differences in the structure of [bmim][Tf(2)N] entrapped inside BHDC RMs, in comparison with the neat IL, are observed from the FT-IR and (1)H NMR measurements. The electrostatic interactions between anions and cations from [bmim][Tf(2)N] and BHDC determine the solvent structure encapsulated inside the nano-droplets. It seems that the IL structure is disrupted due to the electrostatic interaction between the [Tf(2)N](-) and the cationic BHDC polar head (BHD(+)) giving a high ion pair degree between BHD(+) and [Tf(2)N](-) at a low IL content. On the other hand, for the AOT RMs there is no evidence of strong IL-surfactant interaction. The electrostatic interaction between the SO(3)(-) group and the Na(+) counterion in AOT seems to be stronger than the possible [bmim](+)-SO(3)(-) interaction at the interface. Thus, the structure of [bmim][Tf(2)N] encapsulated is not particularly disrupted by the anionic surfactant at all W(s) studied, in contrast to the BHDC RM results. Nevertheless, there is evidence of confinement in the AOT RMs because the [bmim](+)-[Tf(2)N](-) interaction is stronger than in bulk solution. Thus, the IL is more associated upon confinement. Our results reveal that the [bmim][Tf(2)N] structure can be modified in a different manner inside RMs by varying the kind of surfactant used to create the RMs and the IL content (W(s)). These facts can be very important if these media are used as nanoreactors because unique microenvironments can be easily created by simply changing the RM components and W(s).  相似文献   

19.
The nucleophilic aromatic substitution of some activated aryl or heteroaryl halides has been performed in ionic liquid solution, using the 1-butyl-3-methylimidazolium azide as a nucleophile. The reaction course was studied varying the structures of both substrates and ionic liquids. In particular, in the latter case, the reaction of 2-bromo-5-nitrothiophene was carried out in five different ionic liquids ([bmim][BF 4], [bmim][PF 6], [bmim][NTf 2], [bm 2im][NTf 2], and [bmpyrr][NTf 2]). Finally, for all the substrates considered, a comparison with data obtained in MeOH solution in the presence of NaN 3 was also performed. Data collected indicate that in some cases it is possible to obtain aromatic or heteroaromatic azide derivatives in satisfactory yield by means of a S NAr reaction using [bmim][N 3] as the nucleophile.  相似文献   

20.
咪唑基离子液体的物理化学性质估算及预测(英文)   总被引:1,自引:0,他引:1  
根据经验和半经验方程及空隙模型理论,可以估算及预测离子液体在298.15K的物理化学性质.本文讨论了离子液体的分子体积,密度,标准熵,晶格能,表面张力,等张比容,摩尔蒸发焓,空隙体积,空隙率和热膨胀系数.通过实验测得的三种离子液体1-乙基-3-甲基咪唑硫酸乙酯([C2mim][EtSO4)]),1-丁基-3-甲基咪唑硫酸辛酯([C4mim][OcSO4])和1-乙基-3-甲基咪唑双三氟甲磺酰亚胺盐([C2mim][NTf2])的密度和表面张力估算了它们的其它物理化学性质.由这三种离子液体的分子体积及等张比容预测了同系列中其它离子液体[Cnmim][EtSO4],[Cnmim][OcSO4]和[Cnmim][NTf2](n=1-6)的分子体积及等张比容,由此计算出它们的密度及表面张力.进而预测了它们的物理化学性质.将预测的离子液体[C4mim][NTf2]和[C2mim][OcSO4]的密度值与文献报导的实验值进行比较,其偏差在实验误差范围内.最后,将由Kabo经验方程计算的七个离子液体[C2mim][EtSO4]、[C4mim][OcSO4]、[C2mim][NTf2]、[C4mim][NTf2]、丁基三甲基铵双三氟甲磺酰亚胺盐([N4111][NTf2])、甲基三辛基铵双三氟甲磺酰亚胺盐([N8881][NTf2])和1-辛基-3-甲基吡啶四氟硼酸盐([m3opy][BF4])的摩尔蒸发焓与由Verevkin简单规则预测的摩尔蒸发焓进行比较,发现两者符合很好.因此,在缺乏密度和表面张力实验数据的情况下,可以用Verevkin简单规则来预测离子液体的摩尔蒸发焓.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号