Ordered nanocrystal/silica particles self-assembled from nanocrystal micelles and silicate

Ordered gold nanocrystal/silica particles were synthesized through self-assembly of nanocrystal micelles and silicate. Depending on the use of surfactants, and the kinetic conditions of silica hydrolysis and condensation, well-shaped and irregularly-shaped silica particles were formed, inside which the nanocrystals self-organized in a face-centered cubic mesostructure.     

The phase diagram of charged colloidal lipid A-diphosphate dispersions

Small-angle X-ray-scattering, light-scattering, and electron microscope experiments were used to determine the phase transitions of colloidal lipid A-diphosphate aqueous dispersions. The phases detected were a correlated liquid phase, a face-centered cubic (Fd3m) and a body-centered cubic (Im3m) colloidal crystal phase and a new glass phase. These experimentally determined phases were shown to be in accord with theoretically predicted equilibrium phases.     

Phase diagrams of colloidal spheres with a constant zeta-potential

We study suspensions of colloidal spheres with a constant zeta-potential within Poisson-Boltzmann theory, quantifying the discharging of the spheres with increasing colloid density and decreasing salt concentration. We use the calculated renormalized charge of the colloids to determine their pairwise effective screened-Coulomb repulsions. Bulk phase diagrams in the colloid concentration-salt concentration representation follow, for various zeta-potentials, by a mapping onto published fits of phase boundaries of point-Yukawa systems. Although the resulting phase diagrams do feature face-centered cubic and body-centered cubic phases, they are dominated by the (re-entrant) fluid phase due to the colloidal discharging with increasing colloid concentration and decreasing salt concentration.     

Controlling nanocrystal superlattice symmetry and shape-anisotropic interactions through variable ligand surface coverage

The assembly of colloidal nanocrystals (NCs) into superstructures with long-range translational and orientational order is sensitive to the molecular interactions between ligands bound to the NC surface. We illustrate how ligand coverage on colloidal PbS NCs can be exploited as a tunable parameter to direct the self-assembly of superlattices with predefined symmetry. We show that PbS NCs with dense ligand coverage assemble into face-centered cubic (fcc) superlattices whereas NCs with sparse ligand coverage assemble into body-centered cubic (bcc) superlattices which also exhibit orientational ordering of NCs in their lattice sites. Surface chemistry characterization combined with density functional theory calculations suggest that the loss of ligands occurs preferentially on {100} than on reconstructed {111} NC facets. The resulting anisotropic ligand distribution amplifies the role of NC shape in the assembly and leads to the formation of superlattices with translational and orientational order.     

Polymerization-induced phase separation as a one-step strategy to self-assemble alkanethiol-stabilized gold nanoparticles inside polystyrene domains dispersed in an epoxy matrix

The rational design of nanoparticle (NP)/polymer composites with advanced functional properties is based on controlling the distribution and self-assembly of NPs in the polymer matrix. In this study we report a new one-step strategy to produce the self-assembly of alkanethiol-stabilized Au NPs in one of the phases generated by polymerization-induced phase separation. The polymerization of a formulation composed of stoichiometric amounts of diglycidylether of bisphenol A (DGEBA) and m-xylylenediamine (mXDA), containing polystyrene (PS) and dodecanethiol-stabilized Au NPs as modifiers, produced the phase separation of PS and Au NPs into microdomains dispersed in the epoxy matrix. A subsequent phase separation and self-assembly of Au NPs took place inside the PS domains leading to an increase in their concentration in a region close to the interface as revealed by TEM images. SAXS spectra showed that NPs self-assembled as colloidal crystals with a body-centered cubic (bcc) structure. By an adequate selection of the amount of PS and the nature of the epoxy precursors, different morphologies of the final blend could be generated. This brings the possibility of controlling the dispersion and self-assembly of NPs in the final material.     

Multifunctional particles: Magnetic nanocrystals and gold nanorods coated with fluorescent dye-doped silica shells

Multifunctional colloidal core-shell nanoparticles of magnetic nanocrystals (of iron oxide or FePt) or gold nanorods encapsulated in silica shells doped with the fluorescent dye, Tris(2,2′-bipyridyl)dichlororuthenium(II) hexahydrate (Rubpy) were synthesized. The as-prepared magnetic nanocrystals are initially hydrophobic and were coated with silica using a microemulsion approach, while the as-prepared gold nanorods are hydrophilic and were coated with silica using a Stöber type of process. Each approach yielded monodisperse nanoparticles with uniform fluorescent dye-doped silica shells. These colloidal heterostructures have the potential to be used as dual-purpose tags—exhibiting a fluorescent signal that could be combined with either dark-field optical contrast (in the case of the gold nanorods), or enhanced contrast in magnetic resonance images (in the case of magnetic nanocrystal cores). The optical and magnetic properties of the fluorescent silica-coated gold nanorods and magnetic nanocrystals are reported.     

Structural control of nanocrystal superlattices using organic guest molecules

We report a host-guest chemistry approach to controlling the structures of nanocrystal superlattices through a molecular inclusion process. Upon addition of an appropriate amount of guest molecules such as squalane, polyisoprene, and 4-cyano-4'-pentylbiphenyl into a nanocrystal suspension, the resulting nanocrystal superlattices adopted non-close-packed structures (e.g., from face-centered cubic to body-centered cubic) and changed their morphologies to form superparticles. Our mechanistic studies revealed that these guest molecules can strongly tailor the kinetic process in superlattice formation, resulting in the formation of non-close-packed nanocrystal superlattices. The insights gained in this study are not only important for making nanocrystal superlattices with desirable architectures but also open a new way of synthesizing novel organic/inorganic composite materials.     

Melting temperature of colloidal crystals of monodisperse silica spheres in ethanol-water and ethylene glycol-water mixtures

The melting temperature (T _m) of colloidal crystals of monodisperse silica spheres in ethanol-water and ethylene glycol-water suspensions has been measured by reflection spectroscopy. A sphere of 110 nm in diameter and 0.041 in monodispersity index is used after purification and deionization processes. Transformation from the body-centered cubic lattice to the face-centered cubic lattice subphases is observed as the suspension temperature rises, which is similar to the purely aqueous suspension of the same sphere. A phase diagram including liquid-like and crystal-like structures is obtained in the presence of ion-exchange resins coexisted. The data ofT _m are analyzed successfully with the theory of Williams, Crandall, and Wojtowicz. The heat of melting decreases by the addition of ethanol or ethylene glycol in the mixtures.     

Impact of film thickness on the morphology of mesoporous carbon films using organic-organic self-assembly

Mesoporous polymer and carbon thin films are prepared by the organic-organic self-assembly of an oligomeric phenolic resin with an amphiphilic triblock copolymer template, Pluronic F127. The ratio of resin to template is selected such that a body-centered cubic (Im3m) mesostructure is formed in the bulk. However, well-ordered mesoporous films are not always obtained for thin films (<100 nm), and this behavior is found to be directly correlated with the initial phenolic resin to template ratio. Furthermore, the symmetry of ordered phases is highly dependent on the number of layers of spheres in the film: Monolayers and bilayers are characterized by hexagonal close-packed (HCP) symmetry, while films with approximately 5 layers of spheres exhibit a mixture of HCP and face-centered orthorhombic (FCO) structures. Ultrathick films having more than 30 layers of spheres are similar to the bulk body-centered cubic symmetry with a preferential orientation of the closest-packed (110) plane parallel to the substrate. Film thickness and initial composition of the carbonizable precursors in the template are critical factors in determining the morphology of mesoporous carbon films. These results provide insight into why difficulties have been reported in producing ultrathin ordered mesoporous carbon films using cooperative organic-organic self-assembly.     

The foam analogy: from phases to elasticity

By mapping the interactions of colloidal particles onto the problem of minimizing areas, the physics of foams can be used to understand the phase diagrams of both charged and fuzzy colloids. We extend this analogy to study the elastic properties of such colloidal crystals and consider the face-centered cubic, body-centered cubic and A15 lattices. We discuss two types of soft interparticle potentials corresponding to charged and fuzzy colloids, respectively, and we analyze the dependence of the elastic constants on density as well as on the parameters of the potential. We show that the bulk moduli of the three lattices are generally quite similar, and that the shear moduli of the two non-close-packed lattices are considerably smaller than in the face-centered cubic lattice. We find that in charged colloids, the elastic constants are the largest at a finite screening length, and we discuss a shear instability of the A15 lattice.     

Colloidal woodpile structure: three-dimensional photonic crystal with a dual periodicity

With planar photolithography and self-assembly techniques, multilayer colloidal crystals with a woodpile structure were fabricated. They represent a new kind of photonic crystals, that is, three-dimensional (3D) photonic crystals with a dual periodicity; one comes from the face-centered cubic (fcc) structure within the colloidal crystal strips and the other one results from the periodic arrangement of the colloidal crystal strips.     

Organic mediator-induced structural transformation in superlattices of monolayer-protected gold nanoparticles

N-acetylglutathione (NAG)-protected gold nanoparticles self-assemble into three-dimensional (3D) face-centered cubic (fcc)-type superlattices at an air/water interface under highly acidic conditions. To prepare the well-defined superlattices, 1month's incubation is at least necessary since the size growth of the as-prepared nanoparticles is essential. Addition of 4-pyridinecarboxyic acid (PyC), a bifunctional hydrogen-bonding mediator, promotes the formation of the superlattices, which are created for about 2weeks' storage. Interestingly, PyC-induced nanoparticle superlattices are in a body-centered tetragonal (bct) structure. The fcc-to-bct phase transformation would be due to stronger interaction between NAG and PyC than that between NAG molecules on the gold nanoparticle surfaces.     

Synthesis and magnetic properties of colloidal MnPt3 nanocrystals

The colloidal synthesis and magnetic properties of MnPt(3) nanocrystals are reported. The nanocrystal size depended on the Mn reactant used, but the Mn:Pt stoichiometry was always 1:3. As synthesized, the nanocrystals are compositionally disordered with the face-centered cubic (fcc) A1 phase. Annealing at 580 degrees C changed the MnPt(3) crystal structure to the compositionally ordered L1(2) phase (AuCu(3) structure) with higher magnetocrystalline anisotropy. Magnetization measurements showed that the A1 nanocrystals are paramagnetic and the L1(2) MnPt(3) nanocrystals are superparamagnetic.     

Assembly kinetics of nanocrystals via peptide hybridization

The assembly kinetics of colloidal semiconductor quantum dots (QDs) on solid inorganic surfaces is of fundamental importance for implementation of their solid-state devices. Herein an inorganic binding peptide, silica binding QBP1, was utilized for the self-assembly of nanocrystal quantum dots on silica surface as a smart molecular linker. The QD binding kinetics was studied comparatively in three different cases: first, QD adsorption with no functionalization of substrate or QD surface; second, QD adsorption on QBP1-modified surface; and, finally, adsorption of QBP1-functionalized QD on silica surface. The surface modification of QDs with QBP1 enabled 79.3-fold enhancement in QD binding affinity, while modification of a silica surface with QBP1 led to only 3.3-fold enhancement. The fluorescence microscopy images also supported a coherent assembly with correspondingly increased binding affinity. Decoration of QDs with inorganic peptides was shown to increase the amount of surface-bound QDs dramatically compared to the conventional methods. These results offer new opportunities for the assembly of QDs on solid surfaces for future device applications.     

Hybrid gold/silica/nanocrystal-quantum-dot superstructures: synthesis and analysis of semiconductor-metal interactions

We report on the synthesis and spectroscopic characterization of well-defined hybrid structures that consist of a gold core overcoated with a silica shell, followed by a dense monolayer of CdSe nanocrystal quantum dots (QDs). The dielectric silica spacer of a controlled thickness provides a simple means for tuning interactions between the QD emitters and the metal core. To illustrate this tunability, we demonstrate switching between QD emission quenching and enhancement by varying the silica shell thickness. Synthetic procedures developed here employ a final step of self-assembly of QDs onto the silica shell performed via simple titration of the QD solution with prefabricated core/shell Au/SiO2 particles. This approach allows us to perform an accurate quantitative analysis of the effect of the metal on the QD emission intensity. One important result of this analysis is that nonuniformity of nonradiative rates across the QD ensemble has a significant effect on both the magnitude and the shell-thickness dependence of the emission enhancement/quenching factors.     

Polyhedral gold nanocrystals with O h symmetry: from octahedra to cubes

We report the shape and size control of polyhedral gold nanocrystals by a modified polyol process. The rapid reduction of gold precursors in refluxing 1,5-pentanediol has successfully provided a series of gold nanocrystals in the shape of octahedra, truncated octahedra, cuboctahedra, cubes, and higher polygons by incremental changes of silver nitrate concentration. All nanocrystals were obtained quantitatively and were uniform in shape and size in the range of approximately 100 nm. Smaller octahedra and cubes were also prepared by using large amounts of PVP. Silver species generated from AgNO3 seemed to determine the final nanocrystal morphology by the selective growth of {111} and/or the restriction of {100}. The shape evolution of the particles was addressed by quenching the reactions at different time intervals. The approximately 60 nm seeds were generated rapidly and grown slowly with simultaneous edge sharpening. Aging the reaction mixture focused the size and shape of the nanocrystals by Ostwald ripening. We believe that our selective growth conditions can be applied to other shapes and compositions of face-centered cubic metals.     

Effect of anionic surfactants on synthesis and self-assembly of silica colloidal nanoparticles

Effects of the anionic surfactants, sodium dodecyl sulfate and sodium oleate, on the formation and properties of silica colloidal nanoparticles were investigated. At a concentration of approximately 1 x 10(-3) M, adsorption of anionic surfactants increased particle size, monodispersity, and negative surface charge density of synthesized silica particles. As uniformity of particle size and particle-particle interactions increase, colloidal photonic crystals readily self-assemble without extensive washing of the synthesized silica nanoparticles. The photonic crystals diffract light in the visible region according to Bragg's law. The assembled colloidal particle arrays exhibit a face-centered cubic structure in dried thin films. This study offers a new approach for producing ordered colloidal silica thin films.     

Block copolymers under periodic, strong three-dimensional confinement

In this communication we study the influence of strong 3D confinement on the self-assembly of diblock copolymers containing a polyferrocenylsilane metallopolymer segment. Both silica colloidal crystals and silica inverse colloidal crystals, having nanometer-scale interconnected pore networks, are used as molds to direct the self-assembly. Unusual morphologies, such as concentric shells and branched lamellae, result from the interaction of the polymer with the high surface area topologically periodic templates.     

CdSe and CdSe/CdS nanorod solids

We demonstrate the self-organization of CdSe nanorods into nematic, smectic, and crystalline solids. Layered colloidal crystals of CdSe nanorods grow by slow destabilization of a nanocrystal solution upon allowing the diffusion of a nonsolvent into the colloidal solution of nanocrystals. The colloidal crystals of nanorods show characteristic birefringence, which we assign to specific spherulite-like texture of each nanorod assembly. To demonstrate the general character of nanorod self-assembly technique, CdSe/CdS heterostructure nanorods were organized into highly luminescent superlattices.     

Formation of porous epoxy monolith via concentrated emulsion polymerization

Step polymerization was introduced into the concentrated emulsion templating method and was illustrated with the preparation of porous epoxy monolith. A solution of diglycidyl ether of bisphenol-A (DGEBA), its curing agent low molecular weight polyamide resin, and surfactant nonyl phenol polyoxyethylene ether in 4-methyl-2-pentanon as a solvent was used as the continuous phase, an aqueous suspension of colloidal silica as the dispersed phase of the concentrated emulsion. After the continuous phase polymerized and the dispersed phase removed, a porous material is obtained. The key point in this work is to find a compromise between the rates of curing and phase separating and thus achieve a kinetic stability of the concentrated emulsion. The effects of loading of colloidal silica, the pre-curing of the epoxy precursors, and the volume fraction of the dispersed phase were systematically investigated.