Temperature dependence of flux pinning in YBa2Cu3Ox

Magnetization versus applied field data have been taken up to 5 T over a wide temperature range from 10 K to 77 K for polycrystalline YBa₂Cu₃O_x with x=6.98 and x=6.62. The intragrain critical current density has been calculated based on the magnetization measurements. The observed temperature dependence of the flux pinning behavior in the x=6.98 sample indicates a new pinning mechanism in the intermediate temperature region, whose strength increases linearly with the applied field above certain field values. The experimental results also suggest that the twin boundary pinning is active only in the low temperature region.     

Effects of Pb-ion irradiation on the vortex pinning in melt-textured YBa2Cu3Ox

Melt-textured YBa₂Cu₃O_x quasicrystalline samples were studied for the effects of Pb-ion irradiation on the vortex pinning. The strength of the pinning was monitored by measurements of the saturation remanent magnetization (M_R) as a detailed function of temperature from 4.2 K up to T_c (≈92 K). Our results show that M_R is greatly enhanced by the Pb-ion irradiation at all temperatures below T_c. Specifically, when compared to a similar but nonirradiated sample, the M_R of an optimally irradiated sample is raised by a factor of 3.4 at 4.2 K and, more strikingly, by 12.7 at 77 K. Contrastingly, in an earlier study of a γ-ray irradiated Bi_1.6Pb_0.4Sr₂Ca₂Cu₃O₁₀ sample, the vortex pinning was seen to be enhanced but mainly near 4.2 K, suggesting that the γ-ray irradiation produces highly localized pinning sites. Hence, our present results imply conversely that the Pb-ion irradiation creates extended structural defects that are effective as vortex pinning sites up to relatively high temperatures, including that of liquid nitrogen.     

Effects of processing variables on the magnetic properties of melt-processed YBa2Cu3Ox

Samples of YBa₂Cu₃O_x (Y123) with excess Y₂BaCuO₅ (Y211) in the molar ratio of 5:1 (Y123/Y211) were processed using the SLMG (‘solid-liquid melt growth’) technique. The effects of precursor particle size, thermal pretreatment, and substrate choice were examined. Particle size was shown to accelerate degradation of the BaCuO₂ precursor. Thermal pretreatment resulted in reduction of porosity in the samples and hence improved magnetic properties. Contamination by carbon and magnesium from the substrates was also examined and eliminated by using BaZrO₃ substrates.     

Peculiarities of the vortex dynamics in YBa2Cu3Ox single crystals as revealed by irreversible microwave absorption

We report the results of a wide experimental study of the irreversible modulated microwave absorption as a function of temperature, applied magnetic field and modulation amplitude in the YBa₂Cu₃O_x single crystals. To analyze the experimental data the model of the microwave power dissipation by the flux lines has been developed taking into account thermal fluctuations, the distributions of currents and vortices over a sample. We have obtained the information about regimes of vortex motion in the different areas of the H–T phase diagram and estimated the values of flux flow viscosity and critical current density.     

退火氧压对YBa2Cu3O7-x薄膜中的激光感生热电电压效应的影响

测量了在不同氧压下退火生长的YBa₂Cu₃O_7-x(YBCO)薄膜中的激光感生热电电压(LITV)信号,发现随退火氧压的增大可使LITV信号的峰值有2—4倍的增强,并且变化趋势与薄膜热电势的各向异性随氧含量的变化规律相同.波长在473—808nm范围内的连续激光辐照,在5000Pa的氧压下退火生长的YBCO薄膜中探测到的LITV信号最大;而紫外脉冲激光辐照时,LITV信号的最大值出现在退火氧压为10⁵Pa 关键词： 2Cu₃O_7-x薄膜')" href="#">YBa₂Cu₃O_7-x薄膜 激光感生热电电压 各向异性的Seebeck系数 氧含量     

Magnetic levitation of YBa2Cu3Oy single crystals

By using an ordinary electric balance, we are able to measure the magnetic levitation forces acting on a superconducting YBa₂Cu₃O_y (YBCO) single crystal. It is found that when the external magnetic field is parallel to the c-axis of the single crystal, the hysteretic levitation curve is similar to that of a melt-processed YBCO superconducting sample. However, when the external magnetic field is perpendicular to the c-axis of the YBCO single crystal, the levitation forces are too small to be measured by our equipment. Also, we have introduced a simple model with the Bean's approximations to explain the levitation forces. The critical current density derived from this model by fitting with experimental data is quite close to the value obtained from magnetization measurements.     

Observation of defects and growth orientations of YBa2Cu3Ox thin films with YSZ buffer layers on Si

We have investigated defects and in-plate orientations of YBa₂Cu₃O_x thin films prepared by pulsed laser deposition (PLD) with YSZ as a buffer layer. The films showed c-axis oriented growth with the transition temperature T_co up to 87 K. Several types of defects including thermally induced cracks, grain boundaries and outgrowths were observed by scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM). The grain boundary provided a favorable path for crack propagation. The outgrowths nucleated on the YSZ surface grew with stoichiometric composition. According to X-ray diffraction (XRD) and HRTEM studies the YSZ buffer layer grew with the orientation relationship, YSZ110//Si110 and YSZ(001)//Si(001) up to the YBCO/YSZ interface. The superconducting YBCO films on top grew mainly with YBCO100//Si110 and YBCO(001)//Si(001), with some minor portions of YBCO110//Si110 and YBCO(001)//Si(001).     

Peak effect and oxygen ordering in YBa2Cu3O7−δ single crystals

We have investigated the second magnetization peak in pure YBa₂Cu₃O_7−δ single crystals with various oxygen contents (6.91<7−δ<6.97) and degrees of oxygen vacancy ordering, as achieved by low (1 bar) and high (100 bar) oxygen pressure annealing. Although the position of the peak changes drastically with oxygen stoichiometry, no dependence on the distribution of oxygen vacancies has been found for temperatures below 70 K. For T>70 K, however, ordering effects become important as demonstrated by the disappearance of the peak for the high pressure annealed samples. These results suggest that while at low temperatures, pinning of the vortex system by clusters or a more homogeneous distribution of oxygen vacancies is similar, at elevated T, the former are much stronger pinning sites leading to larger hysteresis and the presence of the peak.     

Anomalies of ultrasonic velocity in high-Tc ceramics YBa2Cu3Oy and BiSrCaCu2Oy

Ultrasonic longitudinal velocity and adsorption have been measured in ceramic superconductors YBa₂Cu₃O_y with various porosity and also in BiSrCaCu₂O_y. A velocity drop of about 400 ppm was found at T_c only in the measurements on cooling. The magnitude of the velocity drop is anomalously large compared with the value expected from the thermodynamics. A hysteresis of velocity with respect to temperature was observed in all the samples studied. It is suggested that some structural change at pore size level is responsible for this phenomenon.     

Magnetic and transport properties of YBa2Cu3Oy superconductor foams

The recently reported superconducting YBa₂Cu₃O_y (Y123) foams are highly interesting and promising for variety of applications. In this report we present first magneto-transport measurements of the superconducting properties of these foams. The investigations reveal the superconducting properties being similar to those of bulk melt processed materials. The 123 foams reveal a T_c of 92 K and have a magnetization J_c of 40,000 A/cm² at 77 K and 0 T. The measurements of magnetic hysteresis versus field show a high anisotropy of the critical current density up to J_c^ab/J_c^c7.     

The formation mechanism of Bi2Sr2Ca2Cu3Ox superconducting phase

The mechanism and dynamic model of the formation of 2223 phase are presented and verified in the paper. It reveals that with the solubilization of part of the 2212 phase, 2223 phase is formed by the reaction being carried out according to a nucleation and growth mechanism in the presence of liquid phase, which conforms to the JMA dynamics equation. The addition of a little 2223 phase as nucleator, regrinding and resintering can promote the formation of 2223 phase. But the quick formation rate of 2223 phase may lead to irregularity of the 2223 phase structure, which degrades its electric and magnetic properties, while annealing treatment can improve its superconductivity.     

Commensurate and incommensurate spin fluctuations in YBa2Cu3O6+y

We present an interpretation of the recent neutron data on the commensurate and incommensurate spin fluctuations found in YBa₂Cu₃O_6+y based on a special configuration of the electronic dispersion and intervention from the d_x²−y²-wave superconducting phase. The observed switch-over between the commensurate and incommensurate fluctuation spectra at the change of frequency or temperature is naturally accounted within this scenario.     

Properties of YBa2Cu3O7−δ/YBa2CoxCu3−xOy/YBa2Cu3O7−δ Josephson edge junctions with 0.1 x 0.3 and the effect of flux flow on their normal resistance

YBa₂Cu₃O_7−δ (YBCO) based SNS edge junctions with cobalt doped YBCO barriers were prepared and characterized. At 77 K, good junctions had RSJ-like I–V curves with excess current, magnetic suppression of I_c of about 50% or more, and clear microwave steps. The conductance values 1/R_N at 77 K of junctions with different barrier thickness and composition, were proportional to the junction areas A, but show little correlation with the thickness of the barriers t_B in the range of 15t_B100nm. The corresponding I_cR_N products were observed to scale as J^0.66±0.09_c, similar to what was found by others. At the same time, the measured values of R_N are much smaller than what is expected based on the dimensions of the junction and the resistivity of the barrier material. To explain all of this, we propose a model in which at high supercurrent densities, flux flow of Josephson vortices in the junction leads to R_N values which are lower than expected. This model predicts

Full-size image (1K)

, which fits the observed results very well.     

Transient creep of YBa2Cu3O7−x superconductor

Rapid changes of oxygen partial pressure (P_O2) between 10³ and 2.1×10⁴ Pa have been carried out during steady-state plastic deformation of polycrystalline YBa₂Cu₃O_7−x (YBCO) at temperatures between 825 and 900°C. Transient creep was observed after such P_O2 changes. The analysis of these creep transients allowed the determination of the chemical diffusion coefficient for reequilibration, which is identical to that found from thermogravimetry and electrical conductivity experiments for oxygen vacancies.     

Increase in the diamagnetic response from low-density Bi1.8Pb0.3Sr1.9Ca2Cu3Ox high-temperature superconductors and Bi1.8Pb0.3Sr1.9Ca2Cu3Ox + Ag composites

Low-density polycrystalline Bi_1.8Pb_0.3Sr_1.9Ca₂Cu₃O _x high-temperature superconductors with a foamlike microstructure and composites consisting of this superconductor and silver in an amount of 20, 25, and 30 vol % are synthesized. The microstructure, as well as the temperature and field dependences of the magnetization, M(T) and M(H), are studied. It is found that, in Bi_1.8Pb_0.3Sr_1.9Ca₂Cu₃O _x high-temperature superconductors and Bi_1.8Pb_0.3Sr_1.9Ca₂Cu₃O _x + Ag composites, the diamagnetic response is enhanced and the screening properties are improved compared with high-temperature polycrystalline superconductors with the same composition that are prepared by the standard technology. The observed effect is explained by the features of magnetic flux penetration into a porous medium.     

Co,Zn元素对YBa2Cu3O7-δ的不同的掺杂效应

对单相掺杂样品YBa₂Cu_3-xCo_xO_y (x=0.00,0.025,0.05,0.075,0.10,0.125,0.15,0.20,0.25,O.275,0.30,0.325,0.35,0.375,0.40)和YBa₂Cu_3-xZn_xO_y(x=O.025,0.05,0.075,0.10,0.15,0.20,0.30)作了室温下的 关键词：     

Zone melting of suspension spun Bi2Sr2Ca1Cu2Ox filament

Zone melting was used to enhance the J_c of suspension spun Bi₂Sr₂Ca₁Cu₂O_x filaments. By controlling the directional solidification of the molten zone, highly orientated textures were produced and a transport critical current density of more than 2 × 10⁴ A/cm² at 77 K, 0 T was achieved.     

YBa2Cu3O7-x的金属-绝缘体转变

借助于局域化的标度理论,我们对层状结构系统引进一个由电导各向异性或层间耦合决定的有效维度,认为电导的减小和有效维度的降低是YBa₂Cu₃O_7-x和其它氧化物金属-绝缘体转变的原因,同时也讨论了有限温度的标度理论以解释正常态电阻率的温度行为。 关键词：     

Anomalous changes in CuO2 plane in YBa2Cu4O8 under pressure

We report the results of an atomistic simulation study of the pressure-induced structural changes in YBa₂Cu₄O₈ from 0 to 20 GPa. It is found that the crystal has similar compressibilities in the a- and b-directions over the whole pressure range, whereas in the c-direction there are quite different compressibilities at different pressures. Our results suggest that there exists a correlation between the charge transfer and the change in the Cu(2)---O(1) bond length, but we do not support the suggestion of a direct dependence of T_c on the length of this bond. However, we predict that there are anomalous changes in the CuO₂ plane with pressure, which we propose may lead to a charge carrier redistribution on in-plane copper and in-plane oxygens, which in turn may be related to the optimum carrier concentration in the CuO₂ plane.     

Influence of oxygen pressure on critical current density and magnetic flux pinning structures in YBa2Cu3O7-x fabricated by chemical solution deposition

This paper studies the effect of oxygen partial pressure on the fabrication of YBa 2 Cu 3 O 7 x films on (00l) LaAlO 3 substrates by metalorganic deposition using trifluoroacetates (TFA-MOD).As the oxygen partial pressure increases to 1500 Pa,a great increase in the superconducting properties is observed at high magnetic fields parallel to the YBCO c axis.The cross-sectional transmission electron microscope images show that a high density of stacking faults in the size range of 10-15 nm may act as flux pinning centres to enhance the critical current density of the YBCO films