A kinetic model for the ultrasound catalyzed hydrolysis of solventless TEOS-water mixtures and the role of the initial additions of ethanol

The acid and ultrasound catalyzed hydrolysis of solventless TEOS-water mixtures are studied, as a function of the initial additions of ethanol to the mixtures, by means of flux calorimetry measurements. A device was specially designed for this purpose. Under acid conditions, our proposed method has been able to resolve hydrolysis from other condensation reactions, by detecting the exothermal hydrolysis reaction heat. The process has been explained by a dissolution and reaction mechanism. Ultrasound forces the dissolution process to start the reaction. The alcohol produced in the reaction helps the dissolution process to further enhance the hydrolysis. Initial amounts of pure ethanol added to the mixtures shorten the start time of the reaction, due to an additional effect of dissolution, and diminish the reaction rate, as a result of the solvent dilution effect. Our dissolution and reaction mechanism modeling describes the main points arising from the experimental data and yields k _H =0.24 M^-1 min^-1 for the second-order hydrolysis rate constant at 39°C.     

A calorimetric study of egg white proteins

Egg white is of great interest for many culinary and industrial applications. Egg white is used for coating, gluing, thickening and so on in pasta, desserts, etc. There is thus a great interest from the industrial point of view to better know this raw material, used in very large amounts in the dessert production for example, and to obtain egg white fractions with different functional properties.Various egg white fractions prepared by selected procedures were analyzed by differential scanning calorimetry (DSC). The products resulting from a given fractionation procedure can thus be described by the thermal denaturation parameters (temperatures and enthalpies) of the egg white proteins.This work demonstrates the interest of the DSC technique and proves that the fractionation procedures selected here give the expected protein fractions.     

Two step acidic hydrolysis of dialkyl arylphosphonates

1. Download : Download high-res image (38KB)
2. Download : Download full-size image

     

A differential scanning calorimetric study on the irreversible thermal unfolding of concanavalin A

A differential scanning calorimetry study on the thermal denaturation of concanavalin A at pH 5.2 where it exists in the dimeric form was carried out. The calorimetric transitions were observed to be irreversible and the transition temperature of the protein increased with increasing scan rate, indicating that the thermal denaturation process is under kinetic control. The thermal unfolding, and its scan rate dependence could be explained according to the kinetic scheme with k as first-order kinetic constant whose change with temperature is given by the Arrhenius equation. Using this model, rate constant as a function of temperature and activation energy of the process have been calculated. The average activation energy of the kinetic process using different approaches is 129±10 kJ mol⁻¹. The differential scanning calorimetric results on transition temperatures and calorimetric enthalpies supported by intrinsic fluorescence indicate that the irreversibility in the calorimetric transitions of concanavalin A includes a combination of post-transition aggregation, chain separation and loss of cofactor.     

A DFT study of the hydrolysis of hydantoin

Density functional theory (DFT) calculations were made on the hydrolysis of hydantoin (2,4-imidazolidinedione). In the neutral hydrolysis, reacting systems composed of hydantoin and (H₂O)_n with n = 1+3, 2+3, 3+3, and 4+3 were adopted. Three water molecules (“+3”) participate in the in-plane hydrogen-bond circuit, and the n–3 = 1, 2, 3 or 4 water cluster works for the out-of-plane nucleophilic attack onto the carbonyl carbon of hydantoin. Transition states (TSs) involving bond interchanges prompted by proton transfers were determined. The reaction path with n = 3+3 containing N-carbamoyl glycine, N-carboxy glycine and three tetrahedral intermediates was found to be most likely. In the acid-catalyzed hydrolysis, a reacting system composed of hydantoin and H₃O⁺(H₂O)₇ was employed. Ten TSs and nine intermediates were obtained. N-carbamoyl glycine and N-carboxy glycine were confirmed to be detectable stable species. The product consists of glycine, carbonic acid (not CO₂), NH₄⁺, and (H₂O)₅. It has the exothermic energy, whereas the product in the neutral hydrolysis is of the endothermic one for all n values. For both neutral (n = 3+3) and acid-catalyzed hydrolyses, the rate-determining steps were calculated to be for formation of the tetrahedral intermediate, HOOC-CH₂-NH-C(OH)₂NH₂. The pattern of proton transfers along hydrogen bonds was carefully investigated.     

The influence of detergentless microemulsion on the kinetics of hydrolysis of di(p-nitrophenyl) methylphosphonate catalyzed by amines

The influence of the detergentless water/oil microemulsion formed in then-hexane-water-2-propanol system on the kinetics of the hydrolysis of di(p-nitrophenyl) methylphosphonate under the conditions of general base catalysis by primary, secondary, and tertiary aliphatic amines was investigate. The leveling of the catalytic rate constants and basicities of the amines was found for this reaction in a microemulsion. The catalytic rate constants for the amines containing hydrophilic groups increase in microemulsions as compared to those in an aqueous medium, while the catalytic constants for the amines containing hydrophobic groups decrease. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1339–1342, July, 1998.     

AC calorimetric study of phase transitions in phosphatidylcholine-cholesterol systems

Using an ac calorimetric method, detailed behaviour of the heat capacity in dipalmitoyl-phosphatidylcholine-cholesterol system was studied in the cholesterol concentration less than 5 mol%. It was revealed that the heat capacity near the main transition was composed of at least four anomalies, i.e., multipeak took place in the heat capacity. This fact indicates that a simple theory explaining coexistence of two phases in two component systems does not work in the multipeak region. Then, relation between the multipeak heat capacity and the change of the ripple structure with the cholesterol concentration should be taken into account, when we consider thermodynamical behaviour of the systems.

---

Zusammenfassung Mittels AC-Kalorimetrie wurde bei Cholesterol-Konzentrationen von weniger als 5 mol% das Verhalten der Wärmekapazität im System Dipalmitoylphosphatidylcholin-Cholesterol untersucht. Es wurde gezeigt, daß sich die Wärmekapazität in der Nähe der Hauptumwandlung aus mindestens vier Anomalien zusammensetzt, d.h. bei der Wärmekapazität kann ein Multipeak beobachtet werden. Diese Tatsache zeigt, daß eine einfache Theorie, welche die Koexistenz zweier Phasen in einem Zweikomponenten-System erklärt, für die Multipeakregion nicht geeignet ist. Weiterhin sollte bei Überlegungen zum thermodynamischen Verhalten von Systemen eine Beziehung zwischen der Multipeak-Wärmekapazität bzw. der Welligkeitsstruktur und der Cholesterol-Konzentration berücksichtigt werden.

     

Sol-gel kinetics for the synthesis of multi-component glass materials

Attenuated Total Reflectance (ATR) FTIR has been used to follow sol-gel synthesis kinetics for tetraethylorthosilicate (TEOS), ethanol, and water solutions yielding pure silicate materials. Aluminosilicates have also been made using TEOS:ethanol:water solutions doped with Al(III). Effective rate constants have been fitted to a kinetic model suggested by the literature for pure silicate materials. This model has been extended to include the effect of Al(III) on the rate constants. The effects of solution pH, temperature, and varying TEOS/Ethanol mole ratios have been investigated. Reliable effective rate constants for metal doped sol-gel solutions will lead to better control of the morphological and chemical properties of multi-component glass materials.     

Copper(II) ion hydrolysis in aqueous solution

A copper(II) ion-selective-electrode potentiometric method was used to determine the first and second hydrolysis constants of Cu²⁺. Special techniques prevented copper(II) hydroxide precipitation, and copper(II) carbonate and cipper(II) organic complexation during the titration of the experimental solution over the pH range 6.8–8.4. The large change in the total copper concentration during the titration due to adsorption of copper onto the vessel walls was accounted for by measuring the total copper concentration at each pH by atomic absorption spectrophotometry. The two hydrolysis constants were determined at 25°C in 0.7 and 0.05m NaClO₄ media. The measured stability constants are independent of the copper concentration and yield similar zero ionic strength values. Also, the stepwise equilibrium constants decrease as the ligand number increases.     

A calorimetric study of spontaneous polymerization in acrylamide systems containing metal nitrates

A calorimetric study of the kinetics of spontaneous polymerization of acrylamide in systems containing Cr(III) and Er(III) nitrates has been carried out. At 20–25 °C, the process is characterized by a considerable induction period (20–40 min), a fast increase of the polymerization rate, up to its maximum value (5–10 min), and its subsequent slow decrease to insignificant values. It has been established that the composition of the reaction mixture significantly affects the recorded polymerization rates, and practically does not change the time parameters and the integral degrees of conversion of the process, which are 20 and 80 % for the nitrates of Cr(III) and Er(III), respectively. The effect of the addition of water or inhibitors of radical reactions on the process has been studied.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1070–1074, June, 1993.     

Solvation of small hydrophobic molecules in formamide: A calorimetric study

The solubility and enthalpy of solution of benzene, cyclohexane, hexane, and heptane in formanide have been determined from titration microcalorimetric experiments at 25°C. The solution enthalpies are significantly more endothermic than in water but still the solubility is much higher. The entropy changes in formamide are small and positive and do not vary significantly with size. The enthalpies of solution of some 1-alkanols, 1-chloro- and 1,5-dichloropentane and pentane-1,5-diol were measured as functions of concentration. The solution enthalpies for 1-alkanols from methanol to decanol increase linearly with chain length. The enthalpic interaction coefficients h_xx are small and negative in formamide while they are large and positive in water. The partial molar heat capacities C _p,2 ^o for 1-propanol, 1-pentanol, benzene and cyclohexane in formamide were determined at 25°C from drop heat capacity measurements. Values of C _p,2 ^o are only slightly larger than the molar heat capacities of the liquid solutes.     

Synthesis and calorimetric curing study of amino-terminated PEEK oligomers

Amino-terminated polyetheretherketone (PEEK) oligomers were prepared by the condensation of 4,4′-difluorobenzophenone and hydroquinone in the presence of a calculated excess of m-aminophenol endblocker. The molecular weight of the oligomer was controlled by the manipulation of the ratio of difluoride to hydroquinone with the appropriate stoichiometric amount of m-aminophenol ensuring amino termination. The thermally induced self-crosslinking of these oligomers was studied by differential scanning calorimetry (DSC). Curing was found to be quite slow, taking up to 1 h to reach completion at 668 K. Cured materials were all completely amorphous in contrast to the semi-crystalline starting material. The limiting T_g reached on curing was found to be proportional to the percentage of reactive terminal groups, as would be expected.     

Lithium-7 nuclear magnetic resonance and calorimetric study of lithium crown complexes in various solvents

Lithium-7 NMR studies have been carried out on lithium ion complexes with crown ethers 12C4, 15C5, and 18C6 in water and in several nonaqueous solvents. In all cases the exchange between the free and complexed lithium ion was fast on the NMR time scale, and a single, population average, resonance was observed. Both 1:1 and 2:1 (sandwich) complexes were observed between lithium ion and 12C4 in nitromethane solution. The stability of the complexes varied very significantly with the solvent. With the exception of pyridine, the stability varies inversely with the Gutmann donor number of the solvent. In general, the stability order of the complexes was found to be 15C5·Li⁺>12C4·Li⁺>18C6·Li⁺. Calorimetric studies on these complexes show that, in most cases, the complexes are both enthalpy and entropy stabilized.     

A calorimetric study ofN,N-dimethylformamide complexes of copper(II) in acetonitrile

Complex formation of copper(II) with N,N-dimethylformamide(DMF) has been investigated calorimetrically in acetonitrile at 25°C. Calorimetric titration curves obtained are explained in terms of formation of [Cu(dmf) _n ]²⁺ (n=1–4, 6) and their formation constants, enthalpies and entropies were determined. Formation of [Cu(dmf)₅]²⁺ is uncertain. The stepwise enthalpies S ₃ ⁰ and entropies S _n ⁰ at each consecutive step are all negative except for S ₃ ⁰ . The overall enthalpies of formation of [Cu(dmf)₆]²⁺ is –(77.8±5.4) kJ-mol^–1, which is compared with the enthalpy of transfer of copper(II) ion, H _t ^o =–79.7 kJ-mol^–1, from acetonitrile to DMF.     

Thermodynamic stability of hydrogen-bonded nanostructures: a calorimetric study

The self-assembly of hydrogen-bonded aggregates (rosettes) in solvent mixtures of different polarity has been studied by calorimetry. The C(50) parameter, the concentration when 50 % of the components are incorporated in the assembly, is used to compare assemblies with different stoichiometry. C(50) for the single rosette 1(3).(BuCYA)(3) (1=N,N-di(4-tert-butylphenyl)melamine; BuCYA=n-butylcyanuric acid) in 1,2-dichloroethane is 25 microM, whereas for double rosettes 2 a(3).(BuCYA)(6) and 2 b(3).(BuCYA) (2=calix[4]arene-dimelamine) it is 0.7 and 7.1 microM, respectively. DeltaG degrees, DeltaH degrees, and TDeltaS degrees values indicate that the thermodynamics of double rosettes reflect the independent assembly of two individual single rosette structures or two rosettes reinforced by additional stabilizing interactions. In more polar solvents the stability of double rosettes decreases. From the correlation of DeltaG degrees with solvent polarity it is predicted that it should be possible to assemble double rosettes in methanol or water. The assembly of 2 b(3).(BuCYA)(6) in 100 % MeOH was proven by (1)H NMR and CD spectroscopy.     

Competitive Binding of Drugs to the Multiple Binding Sites on Human Serum Albumin: A calorimetric study

A multiple-site competitive model has been developed to evaluate quantitatively the equilibrium competition of drugs that bind to multiple classes of binding sites on human serum albumin (HSA). The equations, which are based on the multiple-class binding site model, assume that competition exists at individual sites, that the binding parameters for drug or drug competitor pertain to individual sites, and also that the binding parameters for drug or competitor at any given site are independent of drug or competitor bound at other sites. For the drug-competitor pairs, ethacrynic acid (EA) -caproic acid (C6), -lauric acid (C12), and -palmitic acid (C16), the reaction heat of EA binding to HSA was measured in the absence and the presence of fatty acids at the molar ratio of 3:1 with HSA at pH 7.4 and 37°C by isothermal titration microcalorimetry. The calorimetric titration data induced by the presence of fatty acids were directly compaired to the computer simulation curves by the corresponding multiple-site competititve models, which were precedently calculated from binding parameters of EA and fatty acids. In the case of EA-C12 or -C16 competitive binding, EA binding at the first and the second classes of binding sites on HSA were instantaneously inhibited by C12 or C16, resulting that the binding constant of the first class of binding sites of EA were decreased and that the second class of binding sites on HSA entirely disappeared. In the competition between EA and C6, the first class of binding sites of EA was diminished by C6, resulting in the decrease of the binding constants and the number of binding sites in the first class of EA, whereas, the second class of binding sites was unaffected. The multiple-site competitive model assuming site-site competition could be directly comparable to the calorimetric data and be suitable to account for the competitive processes for drugs bound to the multiple-class of binding sites on HSA.This revised version was published online in November 2005 with corrections to the Cover Date.     

A comparison of calorimetric measurements by using different reaction calorimeters

For a great number of European safety groups, reaction calorimetry is the key technique for analysis of the main reaction in the risk assessment of chemical processes. A comparison of calorimetric studies of model reactions, the N-oxidation of two substituted pyridines with hydrogen peroxide, made by several European groups, can open the door to standardization of the methodologies used. However, the intrinsic experimental complexity of the model reactions, which included dosing at high temperature, a multiphase system and evaporation, and the different evaluation criteria, produced a considerable dispersion between the results obtained by the various groups.We wish to express our grateful thanks to Dr. P. Cardillo and Dr. F. Stoessel for introducting us to this subject, and to Dr. M. F. Barblan from IBB Ingenieurschule Beider Basel, Dr. M. Bollyn from Agfa Gevaert N. V., Dr. P. Cardillo from Stazione Sperimentale per i Combustibili, Dr. R. N. Landau from Sandoz Pharmaceuticals Corporation, Dr. U. Löffler from BASF AG Ludwigshafen, Prof. Dr. H.-U. Moritz from Paderborn University, Dr. R. Rogers from Zeneca FCMO, and Dr. P. W. Schneider from Schering AG for their enthusiastic and significant participation.     

A new approach to the calorimetric investigation of physical and chemical transitions

The theoretical basis for Modulated DSC is described and the additional information in can give over conventional DSC illustrated for some polymers.     

A mild hydrolysis of esters mediated by lithium salts

When treated with amine bases such as triethylamine and various lithium salts in wet solvents, esters are efficiently hydrolyzed to the corresponding acids in good yields. Esters incorporating an α- or β-heteroatom with respect to the ester carbonyl group are hydrolyzed rapidly even at room temperature. To further demonstrate the usefulness of this method, one example is provided where hydrolysis of acetylated camphorsultam is mediated by LiBr.