白光LED用LiBaBO3:Eu2+材料发光特性研究

采用高温固相法制备了LiBaBO₃:Eu²⁺绿色发光材料.测量了Eu²⁺浓度为1mol%时样品的激发与发射光谱,其发射光谱为双峰宽谱,主峰分别为482和507nm,与理论计算值符合很好;监测482nm发射峰时,对应激发光谱的峰值为287和365nm,监测507nm发射峰时,对应的激发峰为365和405nm.研究了Eu²⁺浓度对材料发射光谱的影响,结果显示,随Eu²⁺浓度的增大,蓝、绿发射峰均发生了     

用于白光LED的单一基质白光荧光粉Ca2SiO3Cl2:Eu2+，Mn2+的发光性质

用高温固相法合成了Eu²⁺，Mn²⁺共激活的Ca₂SiO₃Cl₂高亮度白色发光材料，并对其发光性质进行了研究. 该荧光粉在近紫外光激发下发出强的白色荧光，Eu^{2+中心形成峰值为419 nm和498 nm的特征宽带，通过Eu2+中心向Mn2+中心的能量传递导致了峰值为578 nm的发射，三个谱带叠加从而在单一基质中得到了白光. 激发光谱均分布在250—415 nm的波长范围，红绿蓝三个发射带的激发谱峰值分别位于385 nm，412 nm，370 nm和396 nm处，可以被InGaN管芯产生的紫外辐射有效激发. Ca₂SiO₃Cl₂:Eu2+，Mn2+是一种很有前途的单一基质白光LED荧光粉.}     

Luminescence characteristics of Eu2+ activated Ca2SiO4 Sr2SiO4 and Ba2SiO4 phosphorsfor white LEDs

<正>This paper investigates the luminescence characteristics of Eu²⁺ activated Ca₂SiO₄,Sr₂SiO₄ and Ba₂SiO₄ phosphors. Two emission bands are assigned to the f-d transitions of Eu²⁺ ions doped into two different cation sites in host lattices,and show different emission colour variation caused by substituting M²⁺ cations for smaller cations.This behaviour is discussed in terms of two competing factors of the crystal field strength and covalence.These phosphors with maximum excitation of around 370 nm can be applied as a colour-tunable phosphor for light-emitting diodes（LEDs） based on ultraviolet chip/phosphor technology.     

Eu2+掺杂浓度对Ca2MgSi2O7∶Eu2+荧光粉发光特性的影响

采用化学共沉淀法制备了Ca_2-xMgSi₂O₇:xEu²⁺绿色荧光粉.用X射线衍射仪、荧光分光光度计及光色综合测试系统对Ca_2-xMgSi₂O₇:xEu²⁺绿色荧光粉的相结构、发光性能进行了测试.结果表明:其激发光谱分布在300–480 nm波长范围,谱峰位于389,430 nm处,可以被InGaN管芯产生的360–480 nm辐射有效激发;在波长为430 nm蓝光激发下,其发射光谱谱峰位于531 nm处.Ca_2-xMgSi₂O₇:xEu²⁺绿色荧光粉的发光强度随Eu²⁺掺杂量的增加而增强,当Eu²⁺掺杂量x为0.04时,发光强度达到最大值,而后开始降低,发生浓度猝灭.根据Dexter能量共振理论,浓度猝灭是由电偶极-电偶极相互作用引起的. 关键词： 2MgSi₂O₇∶Eu²⁺')" href="#">Ca₂MgSi₂O₇∶Eu²⁺ 绿色荧光粉 发光特性 白光发光二极管     

A white light emitting phosphor Sr1.5Ca0.5SiO4:Eu, Tb, Eu for LED-based near-UV chip: Preparation, characterization and luminescent mechanism

In this work, we report preparation, characterization and luminescent mechanism of a phosphor Sr_1.5Ca_0.5SiO₄:Eu³⁺,Tb³⁺,Eu²⁺ (SCS:ETE) for white-light emitting diode (W-LED)-based near-UV chip. Co-doped rare earth cations Eu³⁺, Tb³⁺ and Eu²⁺ as aggregated luminescent centers within the orthosilicate host in a controlled manner resulted in the white-light phosphors with tunable emission properties. Under the excitation of near-UV light (394 nm), the emission spectra of these phosphors exhibited three emission bands: one broad band in the blue area, a second band with sharp lines peaked in green (about 548 nm) and the third band in the orange-red region (588-720 nm). These bands originated from Eu²⁺ 5d→4f, Tb³⁺⁵D₄→⁷F_J and Eu³⁺⁵D₀→⁷F_J transitions, respectively, with comparable intensities, which in return resulted in white light emission. With anincrease of Tb³⁺ content, both broad Eu²⁺ emission and sharp Eu³⁺ emission increase. The former may be understood by the reduction mechanism due to the charge transfer process from Eu³⁺ to Tb³⁺, whereas the latter is attributed to the energy transfer process from Eu²⁺ to Tb³⁺. Tunable white-light emission resulted from the system of SCS:ETE as a result of the competition between these two processes when the Tb³⁺ concentration varies. It was found that the nominal composition Sr_1.5Ca_0.5SiO₄:1.0%Eu³⁺, 0.07%Tb³⁺ is the optimal composition for single-phased white-light phosphor. The CIE chromaticity calculation demonstrated its potential as white LED-based near-UV chip.     

Eu2+激活的Ca3SiO5绿色荧光粉的制备和发光特性研究

研究了Eu²⁺激活的绿色发光材料Ca₃SiO₅的制备条件和发光性质. Eu²⁺中心形成主峰值为501 nm和次峰值为570 nm的特征宽带，两峰值叠加形成发射峰值为502nm的绿色发射光谱带. 利用这些光谱结果和Van Uitert 经验公式，确认Ca₃SiO₅:Eu²⁺中存在两种性质有差异的Eu²⁺发光中心，它们分别占据基质中八配位的Ca²⁺(Ⅰ)格位和四配位的Ca²⁺(Ⅱ)格位. 其激发光谱分布在250—450 nm的波长范围，峰值位于375 nm处，可以被InGaN管芯产生的350—410 nm辐射有效激发. 关键词： 发光 荧光粉 绿色荧光粉 3SiO₅')" href="#">Ca₃SiO₅ 2+')" href="#">Eu²⁺     

A potential red-emitting phosphor CaSrAl2SiO7:Eu for near-ultraviolet light-emitting diodes

A novel red-emitting phosphor CaSrAl₂SiO₇:Eu³⁺ was firstly synthesized through the high temperature solid state reaction at 1300 °C. The structure, diffuse reflection spectra, photoluminescence spectra, color-coordinate parameters and quantum efficiencies (QE) of phosphors were investigated. The obtained CaSrAl₂SiO₇:Eu³⁺ phosphors have the same structure with that of the Ca₂Al₂SiO₇ and Sr₂Al₂SiO₇ phosphor, which have the melilite structure. Optical properties were studied as a function of Eu³⁺ concentration x, when x>0.14, the intensity of absorption of the f–f transitions of Eu³⁺ at 393 nm is stronger than that of the broad charge transfer transition band (CTB) around 254 nm, and which matches well with the output lights of NUV–LEDs, whereas, the concentration of Eu³⁺x≤0.14, the absorption of 393 nm is weaker than that of CTB. The underlying reason of Eu³⁺ concentration on their luminescent properties was investigated and discussed in detail. As a result, comparing with the commercial red phosphor Y₂O₂S:Eu³⁺, the CaSrAl₂SiO₇:xEu³⁺ (x>0.14) phosphor exhibited excellent color purity and much higher brightness and could be considered as promising red phosphors for NUV–LEDs.     

Combustion synthesis and luminescent properties of a new material Li2(Ba0.99,Eu0.01)SiO4:B for ultraviolet light emitting diodes

Using urea as fuel and boric as flux, a novel bluish green emitting phosphor Li₂(Ba_0.99,Eu_0.01)SiO₄:B³⁺ has been successfully synthesized using a combustion method. The material has potential application as the fluorescent material for ultraviolet light-emitting diodes (UV-LEDs). The dependence of the properties of Li₂(Ba_0.99,Eu_0.01)SiO₄:B³⁺ phosphors upon urea concentration, boric acid doping and initiating combustion temperature were investigated. The crystallization and particle sizes of Li₂(Ba_0.99,Eu_0.01)SiO₄:B³⁺ have been investigated by using powder X-ray diffraction (XRD) and transmission electron microscopy (TEM). Luminescence measurements showed that the phosphors can be efficiently excited by ultraviolet (UV) to visible region, emitting a bluish green light with peak wavelength of 490 nm. The results showed that the boric acid was effective in improving the luminescence intensity of Li₂(Ba_0.99,Eu_0.01)SiO₄ and the optimum molar ratio of boric acid to barium nitrate was about 0.06. The optimized phosphors Li₂(Ba_0.99,Eu_0.01)SiO₄:B_0.06³⁺ showed 160% improved emission intensity compared with that of the Li₂(Ba_0.99,Eu_0.01)SiO₄ phosphors under UV (λ_ex=350 nm) excitation.     

Ca2SiO4:Dy3+材料的制备及其发光特性

采用高温固相法制备了Ca₂SiO₄:Dy³⁺发光材料.在365nm紫外光激发下,测得Ca₂SiO₄:Dy³⁺材料的发射光谱为一多峰宽谱,主峰分别位于486nm,575nm和665nm处;监测575nm发射峰,测得材料的激发光谱为一多峰宽谱,主峰分别位于331nm,361nm,371nm,397nm,435nm,461nm和478nm处.研究了Dy³⁺掺杂浓度对Ca₂SiO₄:Dy³⁺材料发射光谱及发光强度的影响,结果显示,随Dy³⁺浓度的增大,黄、蓝发射峰强度比(Y/B)逐渐增大,利用Judd-Ofelt理论解释了其原因;随Dy³⁺浓度的增大,Ca₂SiO₄:Dy³⁺材料发光强度先增大,在Dy³⁺浓度为4 mol%时到达峰值,而后减小,根据Dexter理论其浓度猝灭机理为电偶极-电偶极相互作用.研究了电荷补偿剂Li⁺,Na⁺和K⁺对Ca₂SiO₄:Dy³⁺材料发射光谱的影响,结果显示,不同电荷补偿剂下,随电荷补偿剂掺杂浓度的增大,Ca₂SiO₄:Dy³⁺材料发射光谱强度的演化趋势相同,即Ca₂SiO₄:Dy³⁺材料发射峰强度先增大后减小,但不同电荷补偿剂下,材料发射峰强度最大处对应的补偿剂浓度不同,对应Li⁺,Na⁺和K⁺时,浓度分别为4mol%,4mol%和3mol%. 关键词： 白光LED 2SiO₄:Dy³⁺')" href="#">Ca₂SiO₄:Dy³⁺ 发光特性 电荷补偿     

Eu$lt;sup$gt;2+$lt;/sup$gt;的掺杂浓度对BaAl$lt;sub$gt;2$lt;/sub$gt;Si$lt;sub$gt;2$lt;/sub$gt;O$lt;sub$gt;8$lt;/sub$gt;：Eu$lt;sup$gt;2+$lt;/sup$gt;荧光粉发光特性的影响

采用化学共沉淀法一次煅烧工艺合成了BaAl₂Si₂O₈：Eu²⁺蓝色荧光粉.用X射线衍射仪和荧光分光光度计等对BaAl₂Si₂O₈：Eu²⁺蓝色荧光粉的相结构、发光性能进行了测试.结果表明：化学共沉淀法一次煅烧工艺合成的BaAl₂Si₂O₈：Eu²⁺蓝色荧光粉为单相;其激发光谱分布在240—410 nm的波长范围,峰值位于320 nm处,可以被InGaN管芯产生的350—410 nm辐射有效激发;在365 nm近紫外光的激发下,测得其发射光谱是位于465 nm附近的宽带峰.BaAl₂Si₂O₈：Eu²⁺蓝色荧光粉的发光强度随Eu²⁺浓度的增大逐渐加强,当Eu²⁺掺杂的摩尔分数为3.5%时,发光强度达到最大值,而后随掺杂浓度的增加而减小,发生浓度猝灭;根据Dexter能量共振理论,该浓度猝灭是由于Eu²⁺的离子间交换相互作用引起的. 关键词： 2Si₂O₈：Eu²⁺')" href="#">BaAl₂Si₂O₈：Eu²⁺ 发光特性 蓝色荧光粉 化学共沉淀法     

Spherical Zn2SiO4:Eu@SiO2 phosphor particles in core-shell structure: Synthesis and characterization

Spherical SiO₂ particles have been coated with Zn₂SiO₄:Eu³⁺ phosphor layers by a Pechini sol-gel process. The microstructure and luminescent properties of the obtained Zn₂SiO₄:Eu³⁺@SiO₂ particles were well characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), photoluminescence (PL) spectra, and lifetime. The results demonstrate that the Zn₂SiO₄:Eu³⁺@SiO₂ particles, which have regular and uniform spherical morphology, emitted an intensive red light emission at 613 nm under excitation at 395 nm. Besides, the effects of the Eu³⁺ concentration, annealing temperature and charge compensators of Li⁺ ions on the PL emission intensities were investigated in detail.     

A potential reddish orange emitting phosphor Ca2BO3Cl:Eu for white light-emitting diodes

A series of phosphors Ca₂BO₃Cl:Eu³⁺ were synthesized by using a high-temperature solid-state reaction technique, and their UV–vis luminescence properties were investigated. The f–f transitions of Eu³⁺ in the host lattice were assigned and discussed. The excitation and emission spectra indicate that this phosphor can be effectively excited by ultraviolet (394 nm), and exhibit reddish orange emission corresponding to the ⁵D₀→⁷F_J (J=0, 1, 2) transitions of Eu³⁺. The influence of the doping concentration and charge compensators on the relative emission intensity of Eu³⁺ was investigated, and the optimum doping concentration is 0.04. The critical distance R_c was estimated to be 17.1 Å in terms of the concentration quenching data. The present study suggests that Ca₂BO₃Cl:Eu³⁺ can be a potential candidate as an UV-convertible phosphor for white light-emitting diodes (LEDs).     

Light emitting properties of SiAlON:Eu<Superscript>2+</Superscript> green phosphor

SiAlON:Eu²⁺ green phosphor was successfully synthesized by solid-state synthesis for application to white-LED. The phase development, microstructure, photoluminescence and thermal quenching properties were investigated in detail. The prepared SiAlON:Eu²⁺ green phosphor had a rod-like morphology with a uniform particle distribution in length. The SiAlON:Eu²⁺ green phosphor absorbed a broad UV–Vis spectral region and showed a single intense broadband emission near 540 nm. The prepared SiAlON:Eu²⁺ green phosphor showed superior thermal quenching properties compared to silicate green phosphor. The light emitting properties of white-LED prepared by SiAlON:Eu²⁺ as green phosphor was investigated. The white-LED using the prepared SiAlON:Eu²⁺ green phosphor exhibited good optical stability in high driving currents compared to silicate phosphor.     

Energy transfer between activators at different crystallographic sites in Sr3SiO5:Eu

A yellow phosphor, Sr₃SiO₅:Eu²⁺, was synthesized by a high temperature solid-state method. Sr₃SiO₅:Eu²⁺ exhibits a single yellow emission under the blue radiation excitation. However, Sr₃SiO₅:Eu²⁺ shows a two-peak emission under the ultraviolet radiation excitation when Eu²⁺ doping content is less than 0.01 mol. Moreover, the blue emission disappears and the yellow emission reaches the peak value when Eu²⁺ doping content is 0.01 mol. Namely, the energy transfer takes place between the Eu²⁺ activators, which is located at two different crystallographic sites in the Sr₃SiO₅. And the energy transfer mechanism is the dipole-dipole interaction.     

A potential red phosphor LiGd(MoO4)2:Eu for light-emitting diode application

Eu³⁺-doped LiGd(MoO₄)₂ red phosphor was synthesized by solid-state reaction, and its photoluminescent properties were measured. The effect of Eu³⁺ doping concentration on PL intensity was investigated, and the optimum concentration of Eu³⁺ doped in LiGd(MoO₄)₂ was found to be 30 mol%. Compared with Y₂O₂S:0.05Eu³⁺, Na_0.5Gd_0.5MoO₄:Eu³⁺ and KGd(MoO₄)₂:Eu³⁺, the LiGd(MoO₄)₂:Eu³⁺ phosphor showed a stronger excitation band around 395 nm and a higher intensity red emission of Eu³⁺ under 395 nm light excitation. For the first time, intensive red light-emitting diodes (LEDs) were fabricated by combining phosphor and a 395 nm InGaN chip, confirming that the LiGd(MoO₄)₂:Eu³⁺ phosphor is a good candidate for LED applications.     

Photoluminescence properties of blue-emitting Li4SrCa(SiO4)2:Eu2+ phosphor for solid-state lighting

Blue-emitting Li₄SrCa(SiO₄)₂:Eu²⁺ phosphors have been synthesized by solid-state reaction. The photoluminescence (PL) excitation spectrum shows broad-band absorption and matches well with the emission of a near-UV (n-UV) chip. The PL emission spectrum exhibits a broad-band emission peaking at 430 nm, which is the characteristic emission of the f–d transition of the Eu²⁺ ion. The diffuse reflection spectra, temperature-dependent emission spectra, fluorescence decay, and mechanism of concentration quenching are also studied in detail. Li₄SrCa(SiO₄)₂:Eu²⁺ is a candidate blue phosphor for n-UV excited solid-state lighting.     

Intense green/yellow emission in Ca8Zn(SiO4)4Cl2:Eu, Mn through energy transfer for blue-LED lighting

Eu²⁺ and Mn²⁺ co-doped Ca₈Zn(SiO₄)₄Cl₂ phosphors have been synthesized by a high temperature solid state reaction. Energy transfer from Eu²⁺ to Mn²⁺ is observed. The emission spectra of the phosphors show a green band at 505 nm of Eu²⁺ and a yellow band at 550 nm of Mn²⁺. The excitation spectra corresponding to 4f⁷-4f⁶5d transition of Eu²⁺ cover the spectral range of 370-470 nm, well matching UV and/or blue LEDs. The shortening of fluorescent lifetimes of Eu²⁺ followed by simultaneous increase of fluorescent intensity of Mn²⁺ with increasing Mn²⁺ concentrations is studied based on energy transfer. Upon blue light excitation the present phosphor can emit intense green/yellow in comparison with other chlorosilicate phosphors such as Eu²⁺ and Mn²⁺ co-doped Ca₈Mg(SiO₄)₄Cl₂ and Ca₃SiO₄Cl₂, demonstrating a potential application in phosphor converted white LEDs.     

Enhancement of Eu2+ Luminescence in BaO-SiO2 Compounds Through Composition Modification

Phosphors of Eu²⁺-doped BaO-SiO₂ compounds composed of a major BaSiO₃ phase and a minor Ba₂SiO₄ phase were synthesized by a solid-state method at 1200°C under CO atmosphere. An enhancement of the photoluminescence of Eu²⁺ up to 18 times has been achieved by mixing ZnO into the composition. The composition-optimized phosphor emits bright yellow–green luminescence with excitation between 380 and 420 nm, indicating potential of application in AlGaN-based UV-LEDs. Under the similar synthesis and measurement conditions, the emission band of the optimized phosphor is more intense and has stronger red component than that of Ba₂SiO₄:Eu²⁺. Our experimental results suggest that the addition of ZnO may retain and stabilize Eu²⁺ in BaSiO₃ crystalline lattice and thus may enhance the 5d-4f luminescence and eliminate Eu³⁺ 4f-4f transition.     

Synthesis of Eu x Si6? z Al z O z N8? z green phosphor and?its?luminescent properties

Rare-earth-doped oxynitride or nitride compounds have been reported to be photoluminescent and may then serve as new phosphors because of their good thermal and chemical stabilities. In this work, Eu²⁺-doped β-SiAlON phosphor with a composition of Eu _x Si_6−z Al _z O _z N_8−z (x=0.018, z=0.23) was prepared by gas-pressured solid state reaction. The crystallinity and particle morphology of the prepared phosphor were characterized. The Stokes shift and zero-phonon line were calculated mathematically and estimated from the spectral data. The temperature dependence of photoluminescence was measured from 25 to 250°C. The prepared Eu²⁺-doped β-SiAlON green phosphor showed superior thermal quenching property compared to silicate (SrBaSiO₄:Eu²⁺) green phosphor. The white light-emitting diode (LED) back-lighting unit (BLU) using the prepared β-SiAlON:Eu²⁺ green phosphor exhibited higher color gamut than a commercial silicate phosphor.     

Luminescence characteristics of Eu3+ activated borate phosphor for white light emitting diode

In this paper, the Sr₃Y₂ (BO₃)₄:Eu³⁺ phosphor was synthesized by high temperature solid-state reaction method and the luminescence characteristics were investigated. The emission spectrum exhibits one strong red emission at 613nm corresponding to the electric dipole ⁵D₀--⁷F₂ transition of Eu³⁺ under 365nm excitation, this is because Eu³⁺ substituted for Y³⁺ occupied the non-centrosymmetric position in the crystal structure of Sr₃Y₂ (BO₃)₄. The excitation spectrum indicates that the phosphor can be effectively excited by ultraviolet (254nm, 365nm and 400nm) and blue (470nm) light. The effect of Eu³⁺ concentration on the red emission of Sr₃Y₂ (BO₃)₄:Eu³⁺ was measured, the result shows that the emission intensities increase with increasing Eu³⁺ concentration, then decrease. The Commission Internationale del'Eclairage chromaticity (x, y) of Sr₃Y₂(BO₃)₄:Eu³⁺ phosphor is (0.640,0.355) at 15 mol% Eu³⁺.