Serendipitous synthesis of 1,1-bisfuryl-1- [5-(tri-2-furylmethyl)]furylmethane by the reaction of tri-2-furylmethane with n-butyllithium

[reaction: see text] In an experiment designed to synthesize the tricarboxaldehyde 2 from tri-2-furylmethane, we observed the serendipitous formation of 1,1-bisfuryl-1-[5-(tri-2-furylmethyl)]furylmethane 3, presumably via the intermediacy of the tri-2-furylmethyl radical.     

One-pot synthesis of 7-bromo-1-[4-(1-cyano-1-methylethyl)]-phenyl-[1,2,4]-triazole-[4,3-a]-quinoxalin

[1,2,4]-Triazole-[4,3-a]-quinoxaline is an important component of many drugs. The yield of the reported methods for triazole cyclization step was usually as low as 20%. In this article, the triazole cyclization step was successfully done by using microwave method with a high yield of 75% for the first time.     

Alkyne haloallylation [with Pd(II)] as a core strategy for macrocycle synthesis: a total synthesis of (-)-haterumalide NA/(-)-oocydin A

The rarely used haloallylation reaction, first described by Kaneda and Teranishi in 1974, employs a Pd(II) catalyst to join an alkyne with an allylic halide to produce a 1-halo-1,4-diene subunit. It is shown here that functionalized and tertiary allylic chlorides perform well as substrates in this reaction under the action of PdCl2(PhCN)2 in THF solution. When the alkyne is added slowly to the reaction mixture, the two reactants can be used in a nearly equimolar ratio. This fact means (i) that reasonably complex pairs of alkyne and allylic halide substrates are tolerated and, therefore, (ii) that an intramolecular version of the reaction is suitable as a core strategy for complex molecule construction. The latter is demonstrated in the macrocyclization of 2b to 17b, which is the central step in the total synthesis of (-)-haterumalide NA/(-)-oocydin A (1) that is reported. The final key to the completion of the synthesis was the choice of the acid-labile PMB ester of 1 as the penultimate intermediate.     

Diastereoselective synthesis of enantiopure 5-[2-(alkoxyalkyl)-1-(hydroperoxypropyl)]-3-alkoxycarbonyl-2-alkyl furans

The diastereoselective approach to enantiomerically pure furyl hydroperoxides of general type 1 has been accomplished starting from (S)-(−)-ethyl lactate. In the first part of the synthesis the alkylating reagents 7a,b were efficiently produced to be used in the second part for a 4-step known methodology to obtain furyl hydroperoxides. The most relevant transformation of the synthesis is the first reported diastereoselective iodoenoletherification of 2-acetyl-4-heptenoate esters 8a,b possessing a φ-chiral center. Furthermore, the final radical oxidation performed on (E)-5-alkylidene-4,5-dihydrofurans 11a,b led to formation of hydroperoxides (S,S)-12a,b in a diastereocontrolled manner due to 1,2-asymmetric induction.     

A kinetic study of the electron-transfer in the reaction of tribenzylchlorotin with[CoW_(12)O_(40)]~(5-)

A kinetic study of the electron-transfer in the reaction of tribenzylchlorotin with potassium 12-tungsto cobalt(Ⅲ) ate ion, K_5[CoW_(12)O_(40)],abbreviated as Co(Ⅲ)W,has been performed in different solvents.The studies were carried out in methanol, ethanol,acetonitrile and acetic acid/water.The rate constants,reaction rates and activation parameters were calculated. Our findings show that the rate of disappearance of the Co(Ⅲ) is pseudo-first order.The kinetic data is strongly affected by used solvents.T...     

Grafting of [Mn(CH2tBu)2(tmeda)] on silica and comparison with its reaction with a silsesquioxane

The reaction of [Mn(CH2tBu)2(tmeda)] (1) and a silica partially dehydroxylated at 700 degrees C (SiO(2/700)) yields a single surface species [([triple bond]SiO)Mn(CH2tBu)(tmeda)] (2a; tmeda = tetramethylethylendiamine), while a mixture of 2a and [([triple bond]SiO)2Mn(tmeda)] (2b) is obtained by using SiO(2/200), SiO(2/300), or SiO(2/500) as evidenced by mass balance analysis, and IR and EPR spectroscopy. The reaction of 1 and (c-C5H9)7Si7O12SiOH (3), a soluble silanol that is a molecular model for a silica support, generates the bis-siloxy complex 4, [[(c-C5H9)7Si7O12SiO]2Mn(tmeda)2], in a quantitative yield; compound 4 was characterized by single-crystal X-ray diffraction. These reactions exemplify the limitation of considering molecular silanol derivatives as straightforward and reliable homogeneous models for silica, and address the need for thorough characterization of surface species by the use of surface-science techniques. These studies show the possibility of preparing coordinatively and geometrically unique surface species that would be difficult to prepare by solution chemistry methods; insights into the chemical and physical properties of these surface species are also gained.     

New cyanometalate building units: synthesis and characterization of [Re(CN)(7)]3- and [Re(CN)(8)]3-

Two new cyanorhenate complexes of potential utility in constructing magnetic and photomagnetic materials are reported. Reaction of (Bu4N)CN with [ReCl6]2- in acetonitrile affords yellow (Bu4N)3[Re(CN)7] (1), featuring the pentagonal bipyramidal complex [Re(CN)7]3-. The spectral and magnetic properties of 1 indicate that the complex has an S = 1/2 ground state with considerable anisotropy in the g tensor. In aqueous solution, 1 reacts with Mn2+ ions to generate the three-dimensional cyano-bridged solid [fac-Mn(H2O)3][cis-Mn(H2O)2][Re(CN)7].3H2O (2) containing diamagnetic [Re(CN)7]4-. Addition of KIO4 to the reaction solution, originally intended to prevent reduction of the rhenium during solid formation, instead yields white (Bu4N)3[Re(CN)8] (3). As crystallized in K3[Re(CN)8].2MeCN (4.2MeCN), the diamagnetic [Re(CN)8]3- complex adopts a nearly perfect square antiprismatic coordination geometry. In solution, this species behaves analogously to the isoelectronic [M(CN)8]4- (M = Mo, W) complexes, apparently converting to a dodecahedral geometry and photooxidizing under UV radiation to give paramagnetic [Re(CN)8]2-.     

The synthesis and characterization of 2,4,6-tris(3,4-dihydroxybenzimino)-1,3,5-triazine and its [salen/salophenFe(III)] and [salen/salophenCr(III)] capped complexes

Four new trinuclear Fe(III) and Cr(III) complexes involving tetradentate Schiff bases N,N′-bis(salicylidene)ethylenediamine-(salenH₂) or bis(salicylidene)-o-phenylenediamine-(salophenH₂) with 2,4,6-tris(3,4-dihydroxybenzimino)-1,3,5-triazine have been synthesized and characterized by means of elemental analysis, ¹H N.M.R., FT-IR spectroscopy, thermal analyses and magnetic susceptibility measurements. The complexes have also been characterized as low-spin distorted octahedral Fe(III) and Cr(III) bridged by catechol group.     

Speciation of nitrogen - [N(3-)] and [N(2)(2-)] - in binary compounds

The nitrogen content of the binary compounds SrN = Sr(4)[N](2)[N(2)], Sr[N(2)], and Ba[N(2)] (prepared by high-pressure syntheses) was determined analytically by using the carrier gas hot extraction method. For handling of the air- and moisture-sensitive samples, a transfer chamber was constructed to protect the compounds against decomposition before being analyzed. Additionally, it was necessary to develop a method allowing controlled and variable heating of the electrode furnace to get analytical results with high precision and accuracy. By means of a suitable temperature program it was possible not only to verify the existence but also to quantify the two different nitrogen species ([N(3-)] and [N(2)(2-)]), and thus confirm the results of recent neutron diffraction studies.     

New easy approach to the synthesis of 2,5-disubstituted and 2,4,5-trisubstituted 1,3-oxazoles. The reaction of 1-(methylthio)acetone with nitriles

The reaction of 1-(methylthio)acetone with different nitriles in the presence of triflic anhydride led to the one-pot formation of 2-substituted 5-methyl-4-methylthio-1,3-oxazoles in good yield. 1,2- and 1,4-Bisozaxolyl-substituted benzenes were obtained when the reaction was carried out using aromatic dinitriles. The methylthio group at the C4 position of the oxazole ring was easily removed with Raney nickel to form 2-substituted 5-methyl-1,3-oxazoles in good yields. 4-Methylsulfonyl derivatives were prepared by the oxidation of the MeS group with m-CPBA. The proposed mechanism for the formation of oxazoles involves an unstable 1-(methylthio)-2-oxopropyl triflate, which was detected from the low-temperature NMR spectra.     

Generation of 1,2-ethanebis(trithiocarbonic acid) dianion from 2,2′-[1,2-ethanediylbis(thio)]- bis-1,3-dithiolane and its reaction with alkyl halides

Generation of 1,2-ethanbis(trithiocarbonic acid) dianion from 2,2′-[1,2-ethanediylbis (thio)]bis-1,3-dithiolane and its reaction with alkyl halldes were investigated.     

Effect of oxidant on the reaction of [RhCl(cyclooctadiene)(phosphine)] with 1-hexene

Summary A promoting role of an oxidant, present in commercial 1-hexene, in the substitution of phosphine in the complex [RhCl(COD)(phosphine)] (1) where the phosphine is PPh₃ or 1/2 BPS-2 [bis(diphenylphosphinoethyl)tetra-methyldisiloxane] and COD=cycloocta-1,5-diene, has been detected and explained. When [oxidant]>[(1)] two reaction steps are distinguished: an oxidation of phosphine to phosphine oxide with generation of [RhCl(COD)], followed by its fast dimerization, and an oxidation of the dimer to Rh^III species. When [oxidant]<[(1)] the latter step is not observed and the reaction of [RhCl(COD)] with 1-hexene is favoured, particularly when an excess of phosphine (even at high oxidant concentration) is present. Most rate constants of the individual steps were evaluated.     

2-[2-(2,3-Dihydrobenzimidazolylidene)]- and 2-[2-(2,3-Dihydropyrido[2,3-d]imidazolylidene)]-5,5-dimethyl-1,3-cyclohexanediones

The reaction of 2-aminocarbonyl-5,5-dimethyl-1,3-cyclohexanedione with 2,3-diaminopyridine, 1,2-phenylenediamine (and its 4-methyl, 4-nitro, 4-carboxy, and 4-benzoyl derivatives), and 3,3-diaminobenzidine gave the corresponding 2-[2-(2,3-dihydrobenzimidazolylidene)]- and 2-[2-(2,3-dihydropyrido[2,3-d]imidazolylidene)]-5,5-dimethyl-1,3-cyclohexanediones. Their structure was confirmed by ¹H NMR spectroscopic data and X-ray analysis.     

Computational study of the reaction of fluorine atom with acetone

The reaction of F(2P) with acetone has been studied theoretically using ab initio quantum chemistry methods and transition state theory. The potential energy surface was calculated at the G3MP2 level using the MP2/6-311G(d,p) optimized structures. Additionally, to ensure the accuracy of the calculations, optimizations with either larger basis set (e.g., MP2/G3MP2Large) or higher level electron correlation [e.g., CCSD/ 6-311G(d,p)] were also performed. It has been revealed that the F + CH3C(O)CH3 reaction proceeds via two pathways: (1) the direct hydrogen abstraction of acetone by F gives the major products HF + CH3C(O)CH2; (2) the addition of F atom to the >C=O double bond of acetone and the subsequent C-C bond cleavage gives the minor products CH3 + CH3C(O)F. All other product channels are of no importance due to the occurrence of significant barriers. Both abstraction and addition appear to be barrierless processes. Variational transition state model and multichannel RRKM theory were employed to calculate the temperature- and pressure-dependent rate constants and branching ratios. The predicted rate constants for the abstraction channel and the yields of HF + CH3C(O)CH3 and CH3 + CH3C(O)F are both in good agreement with the experimental data at 295 K and 700 Torr. A negative temperature dependence of the overall rate constants was predicted at temperatures below 500 K.