A time-resolved lif study of the kinetics of OH(ν = 0) and OH(ν = 1) with HCl and HBr

The kinetics of OH(ν = 0) and OH(ν = 1) have been followed using pulsed photolysis of H₂O or HNO₃ to generate hydroxyl radicals, and time-resolved, laser-induced fluorescence to observe the rates of their subsequent removal in the presence of HCl or HBr. The experiments yield the following rate constants (cm³ molecule^?1 s^?1) at 298 ± 4 K: OH(ν = 0) + HCl: k_o = (6.8 ± 0.25) × 10^?13; OH(ν = 0) + HBr: k_o = (11.2 ± 0.45) × 10^?12; OH(ν = 1) + HCl: k₁ = (9.7 ± 1.0) × 10^?13; OH(gn = 1) + HBr; k₁ = (8.1 ± 1.05) × 10^?12 For OH(ν = 1), the measurements do not distinguish between loss by reaction and relaxation, and the fact that k₁ > k_o for HCl is tentatively attributed to relaxation, probably by near-resonant vibrational—vibrational energy transfer. Clearly, neither of these exothermic, low-activation-energy reactions is enhanced to any great extent, if at all, by vibrational excitation of the OH radical.ft]*|Present address: Battelle/Pacific Northwest Laboratories, P.O. Box 999, Richland, Washington 99352, USA.     

Free radical inactivation of trypsin

Reactivities of free radical oxidants, ^.OH, Br^-·₂ and Cl₃COO^. and a reductant, CO^-·₂, with trypsin and reactive protein components were determined by pulse radiolysis of aqueous solutions at pH 7, 20°C. Highly reactive free radicals, ^.OH, Br^-·₂ and CO^-·₂, react with trypsin at diffusion controlled rates, k(^.OH + trypsin) = 8.2 × 10¹⁰ M^-1 s^-1, k(Br^-·₂ + trypsin) = 2.55 × 10⁹ M^-1 s^-1 and k(CO^-·₂ + trypsin) = 2.6 × 10⁹ M^-1 s^-1. Moderately reactive trichloroperoxy radical, k(Cl₃COO^. + trypsin) = 3 × 10⁸ M^-1 s^-1, preferentially oxidizes histidine residues. The efficiency of inactivation of trypsin by free radicals is inversely proportional to their reactivity. The yields of inactivation of trypsin by ^.OH, Br^-·₂ and CO^-·₂ are low, G(inactivation) = 0.6-0.8, which corresponds to ∾ 10% of the initially produced radicals. In contrast, Cl₃COO^. inactivates trypsin with ∾ 50% efficiency, i.e. G(inactivation) = 3.2.     

Kinetics and mechanism of atmospheric reactions of partially fluorinated alcohols

Gas-phase reactions typical of the Earth’s atmosphere have been studied for a number of partially fluorinated alcohols (PFAs). The rate constants of the reactions of CF₃CH₂OH, CH₂FCH₂OH, and CHF₂CH₂OH with fluorine atoms have been determined by the relative measurement method. The rate constant for CF₃CH₂OH has been measured in the temperature range 258–358 K (k = (3.4 ± 2.0) × 10¹³exp(?E/RT) cm³ mol^?1 s^?1, where E = ?(1.5 ± 1.3) kJ/mol). The rate constants for CH₂FCH₂OH and CHF₂CH₂OH have been determined at room temperature to be (8.3 ± 2.9) × 10¹³ (T = 295 K) and (6.4 ± 0.6) × 10¹³ (T = 296 K) cm³ mol^?1 s^?1, respectively. The rate constants of the reactions between dioxygen and primary radicals resulting from PFA + F reactions have been determined by the relative measurement method. The reaction between O₂ and the radicals of the general formula C₂H₂F₃O (CF₃CH₂? and CF₃?HOH) have been investigated in the temperature range 258–358 K to obtain k = (3.8 ± 2.0) × 10⁸exp(?E/RT) cm³ mol^?1 s^?1, where E = ?(10.2 ± 1.5) kJ/mol. For the reaction between O₂ and the radicals of the general formula C₂H₄FO (? HFCH₂O, CH₂F?HOH, and CH₂FCH₂?) at T = 258–358 K, k = (1.3 ± 0.6) × 10¹¹exp(?E/RT) cm³ mol^?1 s^?1, where E = ?(5.3 ± 1.4) kJ/mol. The rate constant of the reaction between O₂ and the radicals with the general formula C₂H₃F₂O (?F₂CH₂O, CHF₂?HOH, and CHF₂CH₂?) at T = 300 K is k = 1.32 × 10¹¹ cm³ mol^?1 s^?1. For the reaction between NO and the primary radicals with the general formula C₂H₂F₃O (CF₃CH₂? and CF₃?HOH), which result from the reaction CF₃CH₂OH + F, the rate constant at 298 K is k = 9.7 × 10⁹ cm³ mol^?1 s^?1. The experiments were carried out in a flow reactor, and the reaction mixture was analyzed mass-spectrometrically. A mechanism based on the results of our studies and on the literature data has been suggested for the atmospheric degradation of PFAs.     

Kinetic studies on the metal(II) tartarate–peroxomonosulfate reaction

The kinetics of oxidation of tartaric acid (TAR) by peroxomonosulfate (PMS) in the presence of Cu(II) and Ni(II) ions was studied in the pH range 4.05–5.20 and also in alkaline medium (pH ～12.7). The rate was calculated by measuring the [PMS] at various time intervals. The metal ions concentration range used in the kinetic studies was 2.50 × 10^?5 to 1.00 × 10^?4 M [Cu(II)], 2.50 × 10^?4 to 2.00 × 10^?3M [Ni(II)], 0.05 to 0.10 M [TAR], and µ = 0.15 M. The metal(II) tartarates, not TAR/tartarate, are oxidized by PMS. The oxidation of copper(II) tartarate at the acidic pH shows an appreciable induction period, usually 30–60 min, as in classical autocatalysis reaction. The induction period in nickel(II) tartarate is small. Analysis of the [PMS]–time profile shows that the reactions proceed through autocatalysis. In alkaline medium, the Cu(II) tartarate–PMS reaction involves autocatalysis whereas Ni(II) tartarate obeys simple first‐order kinetics with respect to [PMS]. The calculated rate constants for the initial oxidation (k₁) and catalyzed oxidation (k₂) at [TAR] = 0.05 M, pH 4.05, and 31°C are Cu(II) (1.00 × 10^?4 M): k₁ = 4.12 × 10^?6 s^?1, k₂ = 7.76 × 10^?1 M^?1s^?1 and Ni(II) (1.00 × 10^?3 M): k₁ = 5.80 × 10^?5 s^?1, k₂ = 8.11 × 10^?2 M^?1 s^?1. The results suggest that the initial reaction is the oxidative decarboxylation of the tartarate to an aldehyde. The aldehyde intermediate may react with the alpha hydroxyl group of the tartarate to give a hemi acetal, which may be responsible for the autocatalysis. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 620–630, 2011     

Kinetic study of the reaction of meso-tetrakis (p-trimethylammoniumphenyl)porphinatodiaquorhodate(II) with chloride,bromide, iodide,hexacyanocobaltate(III) and thiocyanate ions in aqueous solution

The reaction of Cl^?, Br^?, I^?, Co(CN)₆^3? and NCS^? with meso-tetrakis (p-trimethylammoniumphenyl)porphinatodiaquorhodate(III), [RhTAPP(H₂O)₂]⁵⁺, has been studied at 15, 25 and 35°C in 0.1 M [H⁺] with μ = 1.00 M (NaNO₃). The value of the acidity constant, K_al, at 25°C is 4.39 × 10^?9 M. The reactions are first order in anion concentration up to 0.9 M. The values of the stability constants, K₁, and the second order rate constants, k₁, for the reaction with Cl^?, Br^?, I^?, Co(CN)₆^3? and NCS^? are respectively 0.23 M^?1 and 2.5 × 10^?3 M^?1 s^?1, 1.1 M^?1 and 6.92 × 10^?3 M^?1 s^?1, 40.0 M^?1 and 17.0 × 10^?3 M^?1 s^?1, 550 M^?1 and 20.0 × 10^?3 M^?1 s^?1, 3400 M^?1 and 20.9 × 10^?3 M^?1 s^?1. The porphine greatly labilizes the Rh(III). There has been about a 500-fold increase in the rate constant for substitution compared to that of [Rh(NH₃)₅H₂O]³⁺. The substitution rates are however about the same as for [Rh(TPPS)(H₂O)₂]^3?, indicating that the overall charge on the complex plays only a minor role. The kinetic results indicate that dissociative activation is occurring in these reactions.     

The stepwise formation of complexes in the uranyl/azide system in aqueous medium

The use of an indirect potentiometric method with the glass electrode in a ₃?/HN₃/UO₂2+ solution leads to ligand number $\text{n}\text{?}$, at several azide concentrations, at 2.0M ionic strength (NaClO₄), aqueous medium and 25.0±0.1°C. The analysis of data under conditions where hydrolysis is avoided leads to the six overall stepwise constants: β₁ = 1.39 × 10²M^?1; β₂ = 8.26 × 10³M^?2; β₃ = 4.9 × 10⁵M^?3; β₄ = 7.1 × 10⁵M^?4; β₅ = 2.3 × 10⁶M^?5; β₆ = 1.2 × 10⁷M^?6.     

Crystal structure of Na6[(UO2)3O(OH)3(SeO4)2]2 · 10H2O

The complex Na₆[(UO₂)₃O(OH)₃(SeO₄)₂]₂ · 10H₂O (I) is synthesized and studied by X-ray diffraction. The compound crystallizes in the orthorhombic crystal system with the unit cell parameters: a = 14.2225(7) Å, b = 18.3601(7) Å, c = 16.5406(6) Å, V = 4319.2(3) ų, Z = 4, space group Cmcm, R ₁ = 0.0406. Compound I is found to be a representative of the crystal-chemical group A₃M³M² ₃T³ ₂ (A = UO²⁺ ₂, M³ = O^2?, M² = OH^?, T³ = SeO^2? ₄) of the uranyl complexes; it contains layer uranium-containing groups [(UO₂)₃O(OH)₃(SeO₄)₂]^3?. These layers linked to form a three-dimensional cage through bonds formed by the sodium atoms with the oxygen atoms of the uranyl ions and SeO₄ groups that belong to different layers.     

Synthesis of ultra-high-molecular-weight polyacrylonitrile by anionic polymerization

The anionic polymerization of acrylonitrile in DMF initiated by lithium 1,2-bis(diethylamino)-2-oxoethanolate in the range ?60 to 0°C has been studied. The initiator efficiency at low temperatures (?60 to ?40°C) is 2–6%; it remains nearly invariable with conversion owing to the associated state of the initiator. The low concentration of growing active centers is constant throughout the process; as a result, polymers with M > 3 × 10⁵ are produced. The polymers are characterized by a narrow molecular-mass distribution, M _w/M _n = 1.3–1.6, and contain insignificant amounts of low-molecular-mass fractions. It has been shown that controlled polymerization processes can be carried outat moderately low temperatures (?30 to 0°C), and experimental conditions for freezing of polymerization and its recommencement have been ascertained. Optimum conditions for the synthesis of a high-molecular-mass polyacrylonitrile with M > 3 × 10⁵ have been established, and the method for preparing polymers with M = (6.50–8.5) × 10⁵ on an enlarged scale using high concentrations of the monomer has been developed.     

Equilibrium,kinetics, and mechanism of the malonic acid–iodine reaction

The equilibrium constant for the reaction CH₂(COOH)₂ + I₃^? ? CHI(COOH)₂ + 2I^? + H⁺, measured spectrophotometrically at 25°C and ionic strength 1.00M (NaClO₄), is (2.79 ± 0.48) × 10^?4M². Stopped-flow kinetic measurements at 25°C and ionic strength 1.00M with [H⁺] = (2.09-95.0) × 10^?3M and [I^?] = (1.23-26.1) × 10^?3M indicate that the rate of the forward reaction is given by (k₁[I₂] + k₃[I₃^?]) [HOOCCH₂COO^?] + (k₂[I₂] + k₄[I₃^?]) [CH(COOH)₂] + k₅[H⁺] [I₃^?] [CH₂(COOH)₂]. The values of the rate constants k₁-k₅ are (1.21 ± 0.31) × 10², (2.41 ± 0.15) × 10¹, (1.16 ± 0.33) × 10¹, (8.7 ± 4.5) × 10^?1M^?1·sec^?1, and (3.20 ± 0.56) × 10¹M^?2·sec^?1, respectively. The rate of enolization of malonic acid, measured by the bromine scavenging technique, is given by k_en[CH₂(COOH)₂], with k_en = 2.0 × 10^?3 + 1.0 × 10^?2 [CH₂(COOH)₂]. An intramolecular mechanism, featuring a six-member cyclic transition state, is postulated to account for the results on the enolization of malonic acid. The reactions of the enol, enolate ion, and protonated enol with iodine and/or triodide ion are proposed to account for the various rate terms.     

Kinetic Study of the Reduction of Bromate Ion by Tris(1,10-Phenanthroline)Iron(II) and Aquoiron(II) Ions — Implication for the Bromate-Gallic Acid Oscillating Reaction

The kinetics of the bromate oxidation of tris(1,10-phenanthroline)iron(II) (Fe(phen)₃²⁺) and aquoiron(II) (Fe²⁺ (aq)) have been studied in aqueous sulfuric acid solutions at μ = 1.0M and with Fe(II) complexes in great excess. The rate laws for both reactions generally can be described as -d [Fe(II)]/6dt = d[Br^?]/dt = k[Fe(II)] [BrO^?₃] for [H⁺]₀ = 0.428–1.00M. For [BrO^?₃]₀ = 1.00 × 10^?4M. [Fe²⁺]₀ = (0.724–1.45)x 10^?2 M, and [H⁺]₀ = 1.00M, k = 3.34 ± 0.37 M^?1s^?1 at 25°. For [BrO^?₃]₀ = (1.00–1.50) × 10^?4M, [Fe²⁺]₀ = 7.24 × 10^?3M ([phen]₀ = 0.0353M), and [H⁺]₀ = 1.00M, k = (4.40 ± 0.16) × 10^?2 M^?1s^?1 at 25°. Kinetic results suggest that the BrO^?₃-Fe²⁺ reaction proceeds by an inner-sphere mechanism while the BrO^?₃-Fe(phen)₃²⁺ reaction by a dissociative mechanism. The implication of these results for the bromate-gallic acid and other bromate oscillators is also presented.     

Stability constants of D(−)-ribose complexes with calcium in diluted aqueous and methanolic solutions

The study of D(?)-ribose complexing with calcium in aqueous solutions less than 1.64 × 10^?1M by potentiometric measurements with a calcium selective electrode afforded the value of K₁ = 1.70 liters × mole^?1 (SD = 1.05 × 10^?3). Numerical analysis indicated that complex species with 1:1 and 1:2 calcium to D(-)-ribose ratios are present simultaneously: k₁ = 1.13 liters × mole^?1 and K₂ = 8.47 liters × mole^?1 (SD = 0.95 × 10^?3).In methanolic medium 1.24 × 10^?2M with regard to calcium chloride both stoichiometric proportions were evidenced. A large error accompanying the stability constant K₁ = 28 kg × mole^?1 (RSD = 82%) renders unreasonable the K₂ value obtained from the product K₁ × K₂ = 96.5 kg² × mole^?2.The results are discussed with respect to the data published for more concentrated (1.27 M) aqueous solutions obtained on the basis of ₁H-NMR spectroscopic investigations.     

Interaction of tris(2,2′-bipyrazine)ruthenium(2+) ion with radiolytically-generated radicals in aqueous solution. Reactivity of Ru(bpz)+3 toward electron relays

The one-electron reduction of Ru(bpz)²⁺₃ by (CH₃)₂ḢOH is rapid (k = 3.5 × 10⁹ M^-1 s^-1) and quantitative. The product of the reaction, which possesses a ligand-radical coordinated to a Ru(II) center, can be written generically as Ru(bpz)⁺₃, and represented as Ru(bpz)₂(^.bpz^-)⁺ in alkaline solution and its conjugate acid [Ru(bpz)₂(^.bpzH)²⁺; pK_a = 7.1] in acidic solution. The reaction of Ru(bpz)²⁺₃ with ^.OH (k = 5.5 × 10⁹ M^-1 s^-1) yields the OH-adduct to the ring system of the ligands; Ru(bpz)₂(^.bpzOH)²⁺ is unstable toward bimolecular decay (k ∼4× 10⁸ M^-1 s^-1). Reaction with H^. (k = 3 × 10⁹ M^-1 s^-1) results in hydrogenation at a ring-carbon; this product is unstable in the time frame of seconds. No reaction is observed between Ru(bpz)²⁺₃ and Cl^-.₂. Ru(bpz)₂(^.bpz^-)⁺ reduces Co(sep)³⁺ (k = 3.3 × 10⁵ M^-1 s^-1) at pH 10, but there is no reaction at pH 4. However, Ru(bpz)₂(^.bpzH)²⁺ establishes an electron-transfer equilibrium (K_eq = 7) with Cr(bpy)³⁺₃ at pH 3.     

Kinetics and mechanism of the aquation of pentaaqua (trichloroacetato-O)-chromium(2+) ion

The kinetics of the aquation of (H₂O)₅Cr(O₂CCCl₃)²⁺ have been examined at 35–55°C and 1.00M ionic strength with [H⁺] = 0.01?1.00M. The reaction follows the rate equation -d ln [Cr_total]/dt = (a[H⁺]^?1 + b + c[H⁺])/(1 + d[H⁺]), where [Cr_total] is the stoichiometric concentration of the complex. At 45°C a = (1.41 ± 0.03) × 10^?7M/s, b = (1.66 ± 0.02) × 10^?5 s^?1, c = (7.0 ± 0.8) × 10^?5M^?1·S^?1 and d = 2.3 ± 0.3M^?1. Two mechanisms consistent with this rate law are discussed, with evidence being presented in favor of an ester hydrolysis mechanism involving steady-state intermediates. Equilibrium and activation parameters were determined.     

Synthesis,characterization, DNA-binding,and antioxidant activities of four copper(II) complexes containing N-(3-hydroxybenzyl)-amino amide ligands

Four new substituted amino acid ligands, N-(3-hydroxybenzyl)-glycine acid (HL₁), N-(3-hydroxybenzyl)-alanine acid (HL₂), N-(3-hydroxybenzyl)-phenylalanine acid (HL₃), and N-(3-hydroxybenzyl)-leucine acid (HL₄), were synthesized and characterized on the basis of ¹H NMR, IR, ESI-MS, and elemental analyses. The crystal structures of their copper(II) complexes [Cu(L₁)₂]·2H₂O (1), [Cu(L₂)₂(H₂O)] (2), [Cu(L₃)₂(CH₃OH)] (3), and [Cu(L₄)₂(H₂O)]·H₂O (4) were determined by X-ray diffraction analysis. The ligands coordinate with copper(II) through secondary amine and carboxylate in all complexes. In 2, 3, and 4, additional water or methanol coordinates, completing a distorted tetragonal pyramidal coordination geometry around copper. Fluorescence titration spectra, electronic absorption titration spectra, and EB displacement indicate that all the complexes bind to CT-DNA. Intrinsic binding constants of the copper(II) complexes with CT-DNA are 1.32?×?10^6?M^?1, 4.32?×?10^5?M^?1, 5.00?×?10^5?M^?1, and 5.70?×?10^4?M^?1 for 1, 2, 3, and 4, respectively. Antioxidant activities of the compounds have been investigated by spectrophotometric measurements. The results show that the Cu(II) complexes have similar superoxide dismutase activity to that of native Cu, Zn-SOD.     

Poly(styrene‐b‐isobutylene) multiarm star‐block copolymers

Multiarm star‐branched polymers based on poly(styrene‐b‐isobutylene) (PS‐PIB) block copolymer arms were synthesized under controlled/living cationic polymerization conditions using the 2‐chloro‐2‐propylbenzene (CCl)/TiCl₄/pyridine (Py) initiating system and divinylbenzene (DVB) as gel‐core‐forming comonomer. To optimize the timing of isobutylene (IB) addition to living PS⊕, the kinetics of styrene (St) polymerization at −80°C were measured in both 60 : 40 (v : v) methyl cyclohexane (MCHx) : MeCl and 60 : 40 hexane : MeCl cosolvents. For either cosolvent system, it was found that the polymerizations followed first‐order kinetics with respect to the monomer and the number of actively growing chains remained invariant. The rate of polymerization was slower in MCHx : MeCl (k_app = 2.5 × 10⁻³ s⁻¹) compared with hexane : MeCl (k_app = 5.6 × 10⁻³ s⁻¹) ([CCl]_o = [TiCl₄]/15 = 3.64 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M). Intermolecular alkylation reactions were observed at [St]_o = 0.93M but could be suppressed by avoiding very high St conversion and by setting [St]_o ≤ 0.35M. For St polymerization, k_app = 1.1 × 10⁻³ s⁻¹ ([CCl]_o = [TiCl₄]/15 = 1.82 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M); this was significantly higher than that observed for IB polymerization (k_app = 3.0 × 10⁻⁴ s⁻¹; [CCl]_o = [Py] = [TiCl₄]/15 = 1.86 × 10⁻³M; [IB]_o = 1.0M). Blocking efficiencies were higher in hexane : MeCl compared with MCHx : MeCl cosolvent system. Star formation was faster with PS‐PIB arms compared with PIB homopolymer arms under similar conditions. Using [DVB] = 5.6 × 10⁻²M = 10 times chain end concentration, 92% of PS‐PIB arms (M_n,PS = 2600 and M_n,PIB = 13,400 g/mol) were linked within 1 h at −80°C with negligible star–star coupling. It was difficult to achieve complete linking of all the arms prior to the onset of star–star coupling. Apparently, the presence of the St block allows the PS‐PIB block copolymer arms to be incorporated into growing star polymers by an additional mechanism, namely, electrophilic aromatic substitution (EAS), which leads to increased rates of star formation and greater tendency toward star–star coupling. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1629–1641, 1999     

Hydroxyl radical reactions with halogenated ethanols in aqueous solution: Kinetics and thermochemistry

Laser flash photolysis combined with competition kinetics with SCN^? as the reference substance has been used to determine the rate constants of OH radicals with three fluorinated and three chlorinated ethanols in water as a function of temperature. The following Arrhenius expressions have been obtained for the reactions of OH radicals with (1) 2‐fluoroethanol, k₁(T) = (5.7 ± 0.8) × 10¹¹ exp((?2047 ± 1202)/T) M^?1 s^?1, (2) 2,2‐difluoroethanol, k₂(T) = (4.5 ± 0.5) × 10⁹ exp((?855 ± 796)/T) M^?1 s^?1, (3) 2,2,2‐trifluoroethanol, k₃(T) = (2.0 ± 0.1) × 10¹¹ exp((?2400 ± 790)/T) M^?1 s^?1, (4) 2‐chloroethanol, k₄(T) = (3.0 ± 0.2) × 10¹⁰ exp((?1067 ± 440)/T) M^?1 s^?1, (5) 2, 2‐dichloroethanol, k₅(T) = (2.1 ± 0.2) × 10¹⁰ exp((?1179 ± 517)/T) M^?1 s^?1, and (6) 2,2,2‐trichloroethanol, k₆(T) = (1.6 ± 0.1) × 10¹⁰ exp((?1237 ± 550)/T) M^?1 s^?1. All experiments were carried out at temperatures between 288 and 328 K and at pH = 5.5–6.5. This set of compounds has been chosen for a detailed study because of their possible environmental impact as alternatives to chlorofluorocarbon and hydrogen‐containing chlorofluorocarbon compounds in the case of the fluorinated alcohols and due to the demonstrated toxicity when chlorinated alcohols are considered. The observed rate constants and derived activation energies of the reactions are correlated with the corresponding bond dissociation energy (BDE) and ionization potential (IP), where the BDEs and IPs of the chlorinated ethanols have been calculated using quantum mechanical calculations. The errors stated in this study are statistical errors for a confidence interval of 95%. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 174–188, 2008     

Rate constants for: OH + NO2 (+ N2) → HNO3 (+ N2) between 220 and 358 K

Rate constants have been determined for the reaction OH + NO₂ (+ N₂) → HNO₃ (+ N₂), using time-resolved resonance absorption to follow the removal of OH radicals produced by flash photolysis of HNO₃. The measurements cover the ranges: 220 ? T ? 358 K and 3.2 × 10¹⁷ ? [N₂] ? 4.0 × 10¹⁸ molecule cm^?3.     

The tris(picolinate)vanadate(II) ion: Redox properties and electron transfer kinetics with cobalt(III) amines

Vanadium(II) ions form with the pyridine-2-carboxylate ligand a deep blue, tris-substituted complex absorbing at 660 nm (ε = 7.2 × 10³ M^?1) cm^?1) with a shoulder at 450 nm. Reversible spectroelectrochemistry and cyclic voltammetry were observed for this complex, with E_{$\text{1}\text{2}$} = ?0.448 V vs NHE, and ΔS_rc^θ = ?6 cal · mol^?1 · deg^?1. Electron transfer kinetics with [CO(en)₃]³⁺ led to k₁₂ = 3100 M^?1 s^?, ΔH^≠ = 12.4 kcal · mol^?1 and ΔS^≠ = ?0.9 cal · mol^?1 · deg^?1 (I = 0.10 M). For the related [Co(NH₃)₆]³⁺ complex, k₁₃ = 1.9 × 10⁴ M^?1 s^?1. The self-exchange rate constant and activation parameters were analysed in terms of relative Marcus theory.     

Formation of five-connected three-dimensional coordination polymers through the bridging function of the anions

New coordination polymers based on 3,3′,5,5′-tetramethyl-4,4′-bipyrazole (L) with the composition [M₂(L)₄A(NCS)₂] (M²⁺ = Co²⁺, Zn²⁺, Cd²⁺; A^2? = SiF ₆ ^2? , SeO ₄ ^2? ) have been synthesized and characterized by IR spectroscopy and X-ray diffraction. According to X-ray diffraction data, cobalt compounds crystallize in the orthorhombic system with the following unit cell parameters, [Co₂(L)₄SiF₆(NCS)₂] · 3CHCl₃ · CH₃OH: a = 20.568(4), b = 14.568(3), c = 22.929(5) Å, α = β = γ = 90°, V = 6870(2) ų, space group Pbca (no. 61), R(I > 2σ(I)) = 0.0514; [Co₂(L)₄SeO₄(NCS)₂] · 2CHCl₃ · 2CH₃OH · H₂O: a = 13.721(2), b = 21.539(3), c = 22.417(3) Å, α = β = γ = 90°, V = 6625(2) ų, space group P2₁2₁2₁ (no. 19), R(I > 2σ(I)) = 0.0452. The 3D structure of the coordination polymers is composed of wavelike two-dimensional coordination layers [ML₂]_n connected by bridging anions SiF ₆ ^2? , or Se O ₄ ^2? . The complexes have the same five-bonded topology but different symmetry.     

Control of the Harmful Alga Microcystis aeruginosa and Absorption of Nitrogen and Phosphorus by Candida utilis

This study is aimed at controlling eutrophication through converting the nutrients such as nitrogen and phosphorus into microbial protein and simultaneously inhibiting the growth of Microcystis aeruginosa by Candida utilis. C. utilis and M. aeruginosa (initial cell density was 2.25?×?10⁷ and 4.15?×?10⁷ cells·mL^?1) were cultured together in the absence or presence of a carbon source (glucose) during a 10-day experiment. In the absence of carbon source, the measured removal efficiencies of NH₄ ⁺–N and PO₄ ^3?–P were 41.39?±?2.19 % and 82.93?±?3.95 %, respectively, at the second day, with the removal efficiency of 67.82?±?2.29 % for M. aeruginosa at the fourth day. In contrast, the removal efficiencies of NH₄ ⁺–N and PO₄ ^3?–P were increased to 87.45?±?4.25 % and 83.73?±?3.55 %, respectively, while the removal efficiency of M. aeruginosa decreased to 37.89?±?8.41 % in the presence of the carbon source (C/N?=?2:1). These results showed that the growth of M. aeruginosa was inhibited by C. utilis. Our finding sheds light on a novel potential approach for yeast to consume nutrients and control harmful algal during bloom events.