DELAYED EMISSION OF CHLOROPHYLL a AGGREGATES AND RHODAMINE 6G EMBEDDED IN POLYMER MATRIX*

Delayed luminescence (in the microsecond time range) of the chlorophyll (Chl) a“dry” form as well as hydrated dimers located in a polyvinylalcohol film was measured from room temperature down to 8 K. In the same matrix the delayed luminescence of rhodamine 6G (Rhod) was investigated. The delayed emission both of Chl a and Rhod is probably due to the formation and delayed recombination of a radical pair. It seems that this process occurs without participation of triplet states, as it does not reflect their well-known sensitivity to oxygen. The temperature dependence of the delayed luminescence of vanous Chl forms is different. In the region around 678 nm (dry monomer) delayed luminescence needs a thermal activation energy of about 0.03 eV, whereas at 740 nm (wet aggregates) delayed luminescence intensity increases linearly with decreasing temperature. Its assignment as a-type delayed luminescence from the low-lying triplet state can consistently be excluded from both the weak temperature dependence of the delayed fluorescence and its large intensity as compared to the prompt fluorescence. Delayed luminescence of Rhod is almost independent of temperature between 8 K and 300 K. The dependence of delayed luminescence intensity on exciting light intensity is linear at lower intensities and tends to saturation at higher. Therefore the delayed luminescence is not related to exciton annihilation. Positions and intensities of the Chl delayed luminescence bands show that it is not phosphorescence (β-type delayed luminescence). The aggregation of both Chl and Rhod molecules strongly influences delayed luminescence since it differs in several properties if excited in the monomer or in the aggregate absorption range. Every aggregational form of dye emits its characteristic delayed luminescence band.     

Molecular weight dependence of triplet—triplet processes in poly(2-vinylnaphthalene)

Delayed fluorescence and phosphorescence spectra and decay curve measurements at 77 K are reported for samples of poly(2-vinylnaphthalene) with molecular weights determined by viscometry to be in the range 15 600 to 505 000. The intensity of delayed fluorescence relative to phosphorrescence was found to increase with molecular weight up to the highest molecular weight sample of solution polymerized material (MW ≈ 100 000) with a leveling off for the higher molecular weight bulk polymers. It is argued that these results imply a triplet exciton migration distance of up to 700 chromophore units. Decay curves imply that most mobile triplet excitons are trapped within approximately 0.3 s. The excitation dependence of the delayed emissions imply that unimolecular processes dominate the kinetics of triplet state chromophores.     

The lowest excited triplet (T1) energies of p-methoxybenzaldehyde and p-cyanobenzaldehyde vapors estimated from the temperature dependence of the T2(n,pi*) phosphorescence and the S1(n,pi*) fluorescence spectra

Invisible energy levels of the T1(pi, pi*) state of p-methoxybenzaldehyde (anisaldehyde) and p-cyanobenzaldehyde vapors have been estimated through the temperature dependence of the T2(n, pi*) --> S0 phosphorescence and the S1(n, pi*) --> S0 delayed fluorescence spectra. It is shown that the T1(pi, pi*) levels are located at 900 +/- 100 and 300 +/- 100 cm(-1) below the T2(n, pi*) levels, respectively, for p-methoxybenzaldehyde and p-cyanobenzaldehyde vapors. The estimated T1 energy levels are in good agreement with the phosphorescence origins in rigid glass at 77 K.     

Direct observation of delayed fluorescence from a remarkable back-isomerization in Cy5

The direct observations of delayed fluorescence and phosphorescence from the cyanine dye Cy5 are reported. The delayed fluorescence is generated from the S(1) state of trans-Cy5 through a reserve intersystem crossing from the cis-triplet state T(1) to the trans-singlet state S(1) via thermal activation. The lowest cis-triplet state is evidenced to be involved in the formation of the isomer. The back-isomerization from cis-triplet state to trans-singlet state crossing, a remarkably back-isomerization pathway that has not been reported before, plays a significant role in this unusual delayed fluorescence.     

Alternating Copolymers Consisting of Arylalkyl Methacrylates III: Phosphorescence of Poly(arylalkyl methacrylate-alt-styrene) in a Rigid Solution

Delayed emission was observed for alternating and random copolymers of 9-phenanthrylmethyl methacrylate and 2-(9-carbazolyl)ethyl methacrylate with styrene in a rigid solution at 77 K. All the copolymers showed monomeric phosphorescence and delayed fluorescence, indicating the absence of deep trap sites in either the excited singlet or triplet states. The delayed fluorescence was more pronounced for the random copolymers with higher chromophore contents than that for the alternating copolymers. Hence, the interchromophore distance is crucial for efficient triplet-state energy migration. © 1997 John Wiley & Sons, Ltd.     

Photophysical processes in quinoxaline vapor at low pressure

Excitation and pressure dependence of fluorescence and phosphorescence quantum yields has been reinvestigated in detail for quinoxaline in the static vapor phase at pressure range from 10(-3) to 10(-1) Torr. It is shown that the ratio of the nonradiative rate from T(1)(pi, pi*) to the rate of the S(1)(n, pi*) approximately -->T(1)(pi, pi*) intersystem crossing decreases with increasing the excitation energy in the S(0)-->S(1) excitation region. The phosphorescence quantum yield measured as a function of the excitation energy at low pressure shows an abrupt decrease on going the excitation from S(0)-->S(1) to S(0)-->S(2), indicating the slow vibrational energy redistribution between the S(1) levels optically populated and those populated through the internal conversion from S(2) to S(1).     

Emission spectra and electronic energy levels of the rotational isomers of pyridinecarboxaldehyde vapors

Emission and excitation spectra of 2-, 3- and 4-pyridinecarboxaldehyde (2-, 3- and 4-PCA, respectively) vapors have been measured at different temperatures and compared to one another. The emission spectra of these vapors are shown to consist of the T(1)(n, pi) --> S(0) phosphorescence accompanied by the weak thermally activated S(1)(n, pi) --> S(0) delayed fluorescence. Two peaks originating from the two rotamers (syn and anti) have been identified in the fluorescence, phosphorescence and excitation spectra of 3-PCA vapor. Analyses of the temperature dependence and vibrational structure of the spectra of 3-PCA vapor provide the syn-anti energy difference of 190 +/- 30 cm(-1) in the T(1) (n, pi) state, 200 +/- 30 cm(-1) in the S(1)(n, pi) state, and 290 +/- 35 cm(-1) in the ground state. The ground-state energy difference is in agreement with the result of density functional theory (DFT) calculation for 3-PCA vapor. DFT calculation demonstrated also that the syn rotamer exists as a less stable isomer in the ground state for 2- and 3-PCA vapors.     

Metal-enhanced phosphorescence: interpretation in terms of triplet-coupled radiating plasmons

We report our detailed metal-enhanced phosphorescence (MEP) findings using Rose Bengal at low temperature. Silver Island Films (SiFs) in close proximity to Rose Bengal significantly enhance the phosphorescence emission intensity. In this regard, a 5-fold brighter phosphorescence intensity of Rose Bengal was observed from SiFs as compared to a glass control sample at 77 K. In addition, several factors affecting MEP, such as distance dependence and silver film morphology, were also investigated. Our findings suggest that both singlet and triplet states can couple to surface plasmons and enhance both fluorescence and phosphorescence yields. This finding suggests that MEP can be used to promote triplet-based assays, such as those used in photodynamic therapy.     

Sensitized phosphorescence of benzil-doped ladder-type methyl-poly(para-phenylene)

The delayed luminescence and phosphorescence of ladder-type methyl-poly(para-phenylene) (MeLPPP) doped with benzil at a concentration of 20% by weight has been measured. The introduction of benzil leads to a dramatic reduction of the polymer singlet emission. At the same time, a new band with maximum at 611 nm appears, corresponding to the phosphorescence of MeLPPP. The phosphorescence decay on the short time scale is close to an exponential law with a time decay of 15 ms. This indicates that benzil can efficiently sensitize the phosphorescence of the polymer. In addition, a broad and featureless emission is observed in the delayed luminescence spectra of benzil-doped MeLPPP, which is attributed to an exciplex formed between the polymer host and the dopant. We further observe that the delayed fluorescence is enhanced by the addition of benzil. It is concluded that the delayed fluorescence of benzil-doped MeLPPP is mainly due to the annihilation of triplet excitons on the polymer. Finally, efficient triplet-triplet energy transfer from the benzil-doped polymer to the red-emitting phosphorescent dye Pt(II)octaethylporphyrin is established.     

Specifics of deactivation processes of excited states of thiacarbocyanine dyes adsorbed on cellulose

Spectral and kinetic study on deactivation processes of electronically excited states of molecules of cationic (Dye1, Dye2 and anionic (Dye3–Dye5) thiacarbocyanine dyes adsorbed on cellulose was performed. Adsorption of the dyes leads to an increase in the concentration of dimers. The dimers of adsorbates of Dye3–Dye5 exhibit only phosphorescence, whereas the monomers of the adsorbates are capable of both phosphorescence and delayed fluorescence. Adsorbates of Dye3–Dye5 prepared from water and methanol exhibit phosphorescence of cis-monomers. Adsorbates of Dye1 from water and ethanol as well as adsorbates of Dye2–Dye5 from chloroform exhibit delayed fluorescence of trans-monomers. Phosphorescence and delayed fluorescence are observed at room temperature in the presence of air oxygen.     

Luminescence Properties and Analytical Figures of Merits of Benzo(a)Pyrene Guanosine Adduct Adsorbed on α- β- and γ-Cyclodextrin/NaCl,and Trehalose/NaCl Solid Matrices

Abstract

Several cyclodextrin/NaCl and trehalose/NaCl mixtures were investigated as solid matrices for obtaining room-temperature luminescence from a benzo(a)pyrene (B(a)P) guanosine adduct. Room-temperature fluorescence (RTF) and room-temperature phosphorescence (RTP) intensities from the B(a)P-guanosine adduct were compared for different solid matrices. These results showed that 25% trehalose/NaCl, 1% α-cyclodextrin/NaCl, and 1% γ-cyclodextrin/NaCl solid matrices yielded strong fluorescence signals and moderately strong phosphorescence signals at room temperature from the B(a)P-guanosine adduct. In addition, the luminescence properties of pyrene, guanosine, guanosine 3′ -monophosphate free acid and guanosine 3′-monophosphate sodium salt on 1% α-, β-, and γ- cyclodextrin/NaCl solid matrices were obtained.     

Thermally Activated Delayed Fluorescence and Phosphorescence Quenching in Iminophosphonamide Copper and Zinc Complexes

The synthesis of copper and zinc complexes of four variably substituted iminophosphonamide ligands is presented. While the copper complexes form ligand-bridged dimers, the zinc compounds are monomeric. Due to different steric demand of the ligand the arrangement of the ligands within the dimeric complexes varies. Similar to the structurally related iminophosphonamide complexes of alkali metals and calcium, the steady-state and time-resolved photoluminescence (PL) of four of the seven compounds studied here as solids in a temperature range of 5–295 K can be described within the scheme of thermally activated delayed fluorescence (TADF). Accordingly, they exhibit bright blue-green phosphorescence at low temperatures (<100 K), which turns into delayed fluorescence by increasing the temperature. However, unusually, the fluorescence is practically absent in two copper complexes which otherwise still conform to the TADF scheme. In these cases, the excited singlet states decay essentially non-radiatively and their thermal population from the corresponding low-lying triplet states efficiently quenches PL (phosphorescence). Three other copper and zinc complexes only exhibit prompt fluorescence, evidencing a wide variation of photophysical properties in this class of compounds. The excited states of the copper complex with especially pronounced phosphorescence quenching were also investigated by low-temperature time-resolved infrared spectroscopy and quantum chemical calculations.     

Study of properties on non-protected room temperature phosphorescence and delayed excimer fluorescence of pyrene solution

A strong and stable room temperature phosphorescence (RTP) and delayed excimer fluorescence signal located at 596 and 475 nm, respectively, can be induced for pyrene solution in the absence of any protective medium only use KI or TlNO3 as a heavy atom perturber (HAP) and Na2SO3 as a deoxygenator. Both lifetimes of RTP and the delayed fluorescence are in the order of X-ms and the intensities are changed with kind and amount of HAP, but the peak positions are same and there is a iso-luminescent point in the emission spectra corresponding to emission at 475 nm and at 596 nm. The optimum conditions and the effects of kind and amount of HAP and organic solvents on luminescence properties of pyrene solution were studies in detail, and the photophysical process in the presence of KI or TlNO3 for phosphorescence and delayed excimer fluorescence emission of pyrene solution was discussed.     

The dependence of persistent phosphorescence on annealing temperatures in CaTiO3:Pr nanoparticles prepared by a coprecipitation technique

Red emitting phosphors of CaTiO₃:Pr³⁺ nanoparticles with size ranging from 6 to 95 nm have been prepared by a coprecipitation technique and structurally characterized by X-ray diffraction, energy dispersive spectroscopy and scanning electron microscopy. The fluorescence and phosphorescence of CaTiO₃:Pr³⁺ nanoparticles as a function of annealing temperature are investigated. It is found that fluorescence intensities monotonously increase with increasing temperature. However, a maximum in phosphorescence with the increase of annealing temperature occurs for the sample prepared at 700 °C. Based on the measurement of fluorescence emission, fluorescence excitation and reflectance spectra as well as time decay patterns of fluorescence and phosphorescence, it is demonstrated that the dependence of fluorescence and phosphorescence on annealing temperature originates from the decrease of surface defects with the increase of temperature.     

Color-Tunable Dual-Mode Organic Afterglow for White-Light Emission and Information Encryption Based on Carbazole Doping

Dual-mode emission materials, combining phosphorescence and delayed fluorescence, offer promising opportunities for white-light afterglow. However, the delayed fluorescence lifetime is usually significantly shorter than that of phosphorescence, limiting the duration of white-light emission. In this study, a carbazole-based host–guest system that can be activated by both ultraviolet (UV) and visible light is reported to achieve balanced phosphorescence and delayed fluorescence, resulting in a long-lived white-light afterglow. Our study demonstrated the critical role of a charge transfer state in the afterglow mechanism, where the charge separation and recombination process directly determined the lifetime of afterglow. Simultaneously, an efficient reversed intersystem crossing process was obtained between the singlet and triplet charge transfer states, which facilitating the delayed fluorescence properties of host–guest system. As a result, delayed fluorescence lifetime was successfully prolonged to approach that of phosphorescence. This work presents a delayed fluorescence lifetime improvement strategy via doping method to realize durable white-light afterglow.     

ON THE ORIGIN OF LOW TEMPERATURE THERMOLUMINESCENCE IN NUCLEIC ACID BASES: EXCITATION AND EMISSION SPECTRAL STUDIES

Abstract. Thermoluminescence excitation spectra of adenine, guanine, thymine and 1,3-dimethyluracil were observed to be similar to their phosphorescence excitation spectra. Intensity dependence studies of thermoluminescence induced by ultraviolet light suggest that thermoluminescence could not be due to biphotonic ionisation of the molecule by UV. Evidence is presented which demonstrates that the fluorescence component observed in thermoluminescence of some compounds may not be due to triplet-triplet fusion. Further, phosphorescence and thermoluminescence measurements following excitation with monochromatic light at very low intensities and short durations have shown for both a linear dependence on excitation intensity. It thus appears that direct entry of the electrons from the traps into the singlet manifold is necessary for explaining the fluorescence component of thermoluminescence.     

Phosphorescence characteristics of acetophenone, benzophenone, p-aminobenzophenone and Michler's ketone in various environments

The phosphorescence characteristics (excitation and emission spectra and lifetimes) of acetophenone (AP), benzophenone (BP), p-aminobenzophenone (PABP) and Michler's ketone (MK) adsorbed on Whatman No. 1 filter paper were measured at various temperatures, and compared with the phosphorescence characteristics in different solvent glasses at 77 K. Both AP and BP phosphoresce on filter paper only at low temperature (208 K). The phosphorescence lifetimes of AP and BP are < 1 msec, indicating a (3)(n,pi(*)) lower triplet level for paper substrates. With PABP, the low lying triplet state in polar solvents is (3)(CT) and in non-polar solvents is (3)(n, pi(*)); PABP on filter paper results in spectral characteristics similar to those of PABP in polar solvents at 77 K. The lifetime of PABP is longer than that of BP, indicating a (3)(CT) low-lying triplet state. MK, like PABP, has strongly environment-dependent photophysical properties. MK, when adsorbed on filter paper, has an intense long-lived luminescence at room temperature, resulting in a limit of detection of 3 ng ml or 3 pg, and a linear dynamic range of over 3 orders of magnitude. MK appears to be strongly hydrogen-bonded to the filter paper. In studies in ethanol and other solvents, MK adsorbed on filter paper shows a dramatic change in its phosphorescence spectrum when the temperature is lowered from 298 K to 208 K; the phosphorescence peak moves to longer wavelengths and the intensity decreases. The temperature effect could arise from the presence of several conformers of MK or be due to different environmental sites or E-type delayed fluorescence. The low-lying triplet state of MK on filter paper is most likely a (3)(CT) state. Lowering the temperature appears to increase the phosphorescence intensity for ketones which phosphoresce in the (3)(n,pi(*)) triplet state, but affects it only slightly for analytes which phosphoresce in the (3)(pi,pi(*)) triplet state. Room-temperature phosphorescence seems to arise for aromatic ketones and aldehydes with low-lying (3)(pi, pi(*)) or (3)(CT) triplet states.     

Designing systems for a multiple use of light signals.

The photochemical and photophysical behavior of two dendrimers consisting of a benzophenone core and branches that contain dimethoxybenzene units has been investigated. Such dendrimers can undergo a variety of photochemical and photophysical processes, namely: 1) quenching of the fluorescence and phosphorescence of the dimethoxybenzene units by energy transfer to the benzophenone core (antenna effect), 2) direct and sensitized phosphorescence (and delayed fluorescence) of the benzophenone core, 3) hydrogen abstraction by the triplet excited state of the benzophenone core from solvent molecules, 4) intramolecular hydrogen abstraction by the triplet excited state of the benzophenone core from the dendrimer branches, 5) quenching of the phosphorescence and hydrogen abstraction reaction of the benzophenone core by energy transfer to terbium ions and dioxygen; 6) conversion of the UV light absorbed by the dendrimer branches into visible (Tb3+) or near infrared (O2) emission via the sequence of processes 1) and 5). The results obtained emphasize the great potential of suitably designed dendrimers for a multiple use of light signals.     

Low temperature luminescence behaviours of 7-azatryptophan, 5-hydroxytryptophan and their chromophoric moieties

The non-natural amino acids 7-azatryptophan (7AT) and 5-hydroxytryptophan (5HT) have come into significant recent prominence as novel intrinsic luminescence probes for protein structure, function and dynamics. Here, we examine the low temperature luminescence behaviours of these molecules and their respective chromophoric moieties 7-azaindole (7AI) and 5-hydroxyindole (5HI) in representative solvent media. To ascertain, in particular, the potential usefulness of 7AT and 5HT as phosphorescence probes for exploring protein environments with different hydrogen bonding characteristics, a comparison is made of the phosphorescence properties of 7AI and 5HI chromophores in frozen solutions of ethanol and ethyl acetate at 77 K. These solvent media have been chosen as representative models for polar protic and aprotic environments in proteins, respectively. Our findings indicate that one or more of the phosphorescence emission parameters (phosphorescence emission maxima, relative yield and phosphorescence lifetime) of 7AI and 5HI chromophores can serve as sensitive and discriminating probes of hydrogen bonding and related aspects of their surrounding environments. Furthermore, in a model viscous environment (glycerol at low temperatures) significant temperature dependence and red edge excitation shift (REES) effects are observed for the fluorescence emission of 7AT and its chromophoric moiety 7AI. This is consistent with pronounced dipolar relaxation properties of these molecules, and suggests interesting possibilities for exploiting REES in exploring their environmental rigidity in motionally constrained situations.