Temperature, pH, and ionic strength induced changes of the swelling behavior of PNIPAM-poly(allylacetic acid) copolymer microgels

The volume phase transition of colloidal microgels made of N-isopropylacrylamide (NIPAM) is well-studied and it is known that the transition temperature can be influenced by copolymerization. A series of poly( N-isopropylacrylamide- co-allylacetic acid) copolymers with different contents of allylacetic acid (AAA) was synthesized by means of a simple radical polymerization approach. The thermoresponsive behavior of these particles was studied using dynamic light scattering (DLS). Further characterization was done by employing transmission electron microscopy (TEM) and zeta potential measurements. TEM observations reveal the approximately spherical shape and low polydispersity of the copolymer particles. In addition, the measured zeta potentials provide information about the relative surface charge. Since these copolymers are much more sensitive to external stimuli such as pH and ionic strength than their pure PNIPAM counterparts, the volume phase transition was investigated at two different pH values and various salt concentrations. At pH 10 for the copolymer microgels with the highest AAA content, a significant shift of the volume phase transition temperature toward higher values is found. For higher AAA content, a change in pH from 8 to 10 can induce a change in radius of up to 100 nm making the particles interesting as pH controlled actuators.     

Visualizing the interaction between poly-L-lysine and poly(acrylic acid) microgels using microscopy techniques: effect of electrostatics and peptide size

The interaction between lightly cross-linked poly(acrylic acid) (pAA) microgels (50-150 microm in diameter) and poly-L-lysine (pLys) was studied as a function of pH, ionic strength, peptide size, and concentration. The swelling response and distribution of polypeptides within microgel particles was monitored by micromanipulator-assisted light microscopy and confocal laser scanning microscopy, while binding isotherms of pLys in the microgels were determined spectrophotometrically. Conformational changes of pLys were investigated by circular dichroism. The molecular weight of pLys was found to influence the degree of peptide-induced microgel deswelling, largely due to limitation of peptides larger than the effective network mesh size to penetrate the entire gel. Large peptides were concentrated within a surface layer of the gel particles, and at low ionic strength this dense surface layer was shown to act as a largely steric barrier for further penetration of compounds into the gel core. Small peptides, however, distributed evenly throughout the microgel particles and were able to create large microgel volume reductions. The deswelling of microgels increased with decreasing pH, while the uptake of pLys was significantly reduced at low pH. The effect of ionic strength on the interactions of pLys and oppositely charged pAA microgels was moderate and only pronounced for deswelling of gels at high pH. A significant increase in the alpha-helix content of pLys interacting with the oppositely charged microgels was observed for high molecular weight peptides, and the extent of alpha-helix formation was as expected more pronounced at high pH, i.e., at high charge density of the microgels but reduced charge density of the peptides.     

Synthesis strategies to incorporate acrylic acid into N‐vinylcaprolactam‐based microgels

Two different synthesis strategies were used to synthesize N‐vinylcaprolactam (VCL)‐acrylic acid (AA)‐based temperature‐ and pH‐sensitive microgels under the adequate conditions to avoid possible hydrolysis of VCL due to the presence of carboxylic groups provided by AA. Polymeric and colloidal features of the microgels were analyzed: the partial conversion evolutions of each comonomer were determined by ¹H NMR and the swelling/deswelling behavior by means of Photon Correlation Spectroscopy. Considering that microgels are porous soft nanoparticles, conductimetric titrations at the swollen state were carried out to calculate the volumetric charge density. The results indicate that the addition of AA after 30 minutes of reaction time helped to incorporate higher amounts of AA into microgels and as a result, to obtain both temperature‐ and pH‐sensitive nanoparticles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of charged polystyrene-acrylic acid latex particles

Novel, monodisperse charged colloidal particles of polystyrene cross linked with divinylbenzene and surface-grafted with acrylic acid were synthesized by emulsion polymerization and were characterized by estimating the dissociable surface charge by conductivity titration, the particle effective charge by conductivity verses particle concentration, and the particle size by dynamic light scattering and atomic force microscopy. The structural ordering and dynamics were investigated as a function of the volume fraction of the particles using static and dynamic light scattering, respectively. Furthermore, from the electrophoresis measurements, these particles are found to have a high salt tolerance due to increases in charge as a function of salt concentration.     

Deswelling comparison of temperature‐sensitive poly(N‐isopropylacrylamide) microgels containing functional ?OH groups with different hydrophilic long side chains

Two monomers containing functional ? OH groups with different hydrophilic long side chains (viz., triethyleneglycol methacrylate (TREGMA) and polyethyleneglycol methacrylate (PEGMA)) were selected to modify the swelling/deswelling behavior of poly(N‐isopropylacrylamide) (pNIPAM) microgels. Dynamic scattering technique, turbidimetric method, and differential scanning calorimetry (DSC) were employed to investigate the deswelling behavior of the microgels. Experimental results show that the two series of microgels are identical in that incorporation of hydrophilic chains containing ? OH groups causes the volume‐phase transition temperature (VPTT) of pNIPAM microgels to shift to higher temperature; the more hydrophilic the side chains, the more the VPTTs shift. Although PEGMA are more effective in elevating the VPTTs of pNIPAM microgels than TREGMA, p(NIPAM‐co‐TREGMA) microgels show better deswelling properties than p(NIPAM‐co‐PEGMA) microgels, i.e., they have much larger deswelling ratios (α) and display less continuous volume‐phase transition. The VPTTs of the modified microgels can be modulated to well close to the normal body temperature of human beings. These characteristics along with the functional ? OH groups they contain make the microgels competitive candidates for biomaterials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3575–3583, 2005     

基于互穿网络结构的pH/温度双重刺激响应性微凝胶的研究

室温下采用氧化-还原引发体系,以低交联密度的聚(N-异丙基丙烯酰胺)(PNIPAM)微凝胶为种子,通过种子乳液聚合法合成由PNIPAM和聚丙烯酸(PAA)形成的具有互穿聚合物网络结构的微凝胶.傅立叶变换红外光谱分析结果表明微凝胶由PNIPAM和PAA两种聚合物组成,透射电镜表征结果证实微凝胶中PNIPAM和PAA两种聚合物形成了互穿网络结构.用动态激光光散射测试不同温度或pH值水介质中微凝胶的粒径,结果发现微凝胶具有良好的pH/温度双重刺激响应性.在水介质pH值大于5.5的情况下,PAA组分对微凝胶的体积相转变温度没有影响;而在水介质pH值为4.0的情况下,由于PAA与PNIPAM之间的氢键作用,微凝胶的体积相转变温度稍微降低.微凝胶中PAA组分含量越高,其pH刺激响应性越显著.     

Synthesis and characterization of novel pH-responsive microgels based on tertiary amine methacrylates

Emulsion polymerization of 2-(diethylamino)ethyl methacrylate (DEA) in the presence of a bifunctional cross-linker at pH 8-9 afforded novel pH-responsive microgels of 250-700 nm diameter. Both batch and semicontinuous syntheses were explored using thermal and redox initiators. Various strategies were evaluated for achieving colloidal stability, including charge stabilization, surfactant stabilization, and steric stabilization. The latter proved to be the most convenient and effective, and three types of well-defined reactive macromonomers were examined, namely, monomethoxy-capped poly(ethylene glycol) methacrylate (PEGMA), styrene-capped poly[2-(dimethylamino)ethyl methacrylate] (PDMA50-St), and partially quaternized styrene-capped poly[2-(dimethylamino)ethyl methacrylate] (10qPDMA50-St). The resulting microgels were pH-responsive, as expected. Dynamic light scattering and 1H NMR studies confirmed that reversible swelling occurred at low pH due to protonation of the tertiary amine groups on the DEA residues. The critical pH for this latex-to-microgel transition was around pH 6.5-7.0, which corresponds approximately to the known pKa of 7.0-7.3 for linear PDEA homopolymer. The microgel particles were further characterized by electron microscopy and aqueous electrophoresis studies. Their swelling and deswelling kinetics were investigated by turbidimetry. The PDEA-based microgels were compared to poly[2-(diisopropylamino)ethyl methacrylate] (PDPA) microgels prepared with identical macromonomer stabilizers. These PDPA-based microgels had a lower critical swelling pH of around pH 5.0-5.5, which correlates with the lower pKa of PDPA homopolymer. In addition, the kinetics of swelling for the PDPA microgels was somewhat slower than that observed for PDEA microgels; presumably this is related to the greater hydrophobic character of the former particles.     

Doubly responsive polymer-microgel composites: rheology and structure

Mixtures of alkali swellable microgels and linear PNIPAm chains exhibit doubly responsive properties both with pH and temperature. Below the lower critical solution temperature (LCST), the linear chains of PNIPAm are soluble and increase the osmotic pressure outside the microgels, which causes them to deswell. Above the LCST, the PNIPAm chains become insoluble and form spherical colloidal particles confined between the microgels that subsequently reswell. The swelling and deswelling of the microgels change the rheological properties of the composites, providing a unique way to tune the elasticity of the composites with temperature. The structure of the composites above the LCST is studied using multiple light scattering and fluorescence confocal microscopy. The phase separation of PNIPAm above the LCST is strongly affected by the confinement of the PNIPAm chains between the microgels.     

Effects of Hofmeister anions on the flocculation behavior of temperature-responsive poly(N-isopropylacrylamide) microgels

Effects of some sodium salts (NaCl, NaClO₃, and NaSCN) in the Hofmeister series on deswelling and temperature-induced aggregation behavior of microgels of poly(N-isopropylacrylamide) (PNIPAAM) and PNIPAAM-co-PAA with attached poly(acrylic acid) moieties were investigated with the aid of turbidimetry and dynamic light scattering. Addition of salt in the concentration range 0.1–0.5?M generated aggregation of the PNIPAAM microgel particles at elevated temperatures, but it was no distinct difference between chaotropic and kosmotropic anions. In contrast, the flocculation behavior at high temperatures for PNIPAAM-co-PAA revealed a prominent influence of salinity and type of anion on the formation of aggregates. The aggregation transition was shifted to the highest temperature for the most chaotropic anion (SCN^?), and the aggregation transition at the same salt concentration is consistent with the typical Hofmeister series. The turbidity results from the PNIPAAM-co-PAA microgels disclosed a two-step transition for the considered anions, and both a low and high temperature change in the turbidity data was observed. The high-temperature transition followed the Hofmeister series.     

Tunable Encapsulation of Proteins within Charged Microgels

The binding of cytochrome c to pH and thermoresponsive colloidal hydrogels was investigated using multiangle light scattering, measuring loading through changes in particle molar mass and root mean square radius. Loosely cross-linked microgels [composed of a random copolymer of N-isopropylacrylamide (NIPAm) and acrylic acid (AAc)] demonstrated a high loading capacity for protein. Encapsulation was dependent on both the charge characteristics of the network and the salinity of the medium. Under favorable binding conditions (neutral pH, low ionic strength), microgels containing the highest studied charge density (30 mol% AAc) were capable of encapsulating greater than 9.7 × 10(5) cytochrome c molecules per particle. Binding resulted in the formation of a polymer-protein complex and condensation of the polymer. Anionic microgels demonstrated a change in density ~20-fold in the presence of oppositely charged proteins. These studies of cytochrome c encapsulation represent a significant step towards direct measurement of encapsulation efficiency in complex media as we pursue responsive nanogels and microgels for the delivery of macromolecular therapeutic agents.     

The volume transition in thermosensitive core-shell latex particles investigated by small-angle x-ray scattering and dynamic light scattering

We present a survey over recent studies of the volume transition in colloidal core-shell particles composed of a solid poly(styrene) core and a shell of a thermosensitive crosslinked polymer chains. The thermosensitive shell is built up from poly(N-isopropylacrylamide) chains (PNIPA) crosslinked by N,N′-methylenbisacrylamide (BIS). In addition, particles containing acrylic acid (AA) as comonomer have been synthesized and investigated. The volume transition of these particles have been studied by dynamic light scattering (DLS) and by small-angle X-ray scattering (SAXS). In all cases analyzed so far the volume transition was found to be continuous. This finding shows that the core-shell microgels behave in a distinctively different manner than ordinary thermosensitive gels: The crosslinked chains in the shell are bound to a solid boundary independent of temperature. The spatial constraint by this boundary decreases the maximum degree of swelling but also prevents a full collapse of the network above the volume transition.     

From polyelectrolyte to polyampholyte microgels: comparison of swelling properties

We report the results of comparative studies of the swelling behavior of polyelectrolyte (PE) and polyampholyte (PA) microgels in response to pH, ionic strength, temperature, and solvent composition. Polyelectrolyte microgels used were cross-linked binary copolymers of poly(N-isopropylacrylamide) (polyNIPAm) and acrylic acid (AA) or vinyl imidazole (VI). The PA microgels with an excess of either cationic or anionic groups swelled at low or high pH values, respectively, analogous to PE microgels. The PA microgels with similar amounts of AA and VI groups exhibited marked swelling at both high and low pH values. All PA microgels shrank in the intermediate range of pH due to electrostatic attraction between charged AA and VI moieties. In moderately concentrated salt solutions, PA microgels underwent swelling showing antipolyelectrolyte behavior. The extent of swelling of PA microgels increased with rise in AA content. The temperature-dependent contraction of both PE and PA microgels occurred at higher temperatures when AA and VI groups were charged and hydrophilic. Ion pairing between the AA and VI groups increased the extent of the temperature-induced deswelling in PA microgels. The solvent-dependent swelling of PE and PA microgels in ethanol–water mixtures was governed by competing electrostatic and cosolvency effects.

The volume transition in thermosensitive core–shell latex particles containing charged groups

An investigation of the volume transition in thermosensitive core–shell particles by dynamic light scattering (DLS) is presented. The core of the particles consists of polystyrene (diameter 118 nm), whereas the thermosensitive shell is composed of a network of poly (N-isopropylacrylamide) containing 2 mol% acrylic acid counits. The hydrodynamic radius of these particles as determined by DLS decreases in a continuous manner when raising the temperature. It is shown that the volume transition in the core–shell microgels remains continuous for a wide range of ionic strengths and pH values. This behavior is opposite to that of macrogels of the same chemical composition, which undergo a discontinuous volume transition. The present investigation therefore demonstrates that affixing the network to solid colloidal particles profoundly alters the volume transition of thermosensitive networks. The reason is that shrinking can take place only along the radial direction of the particles. The solid core thus exerts a strong spatial constraint onto the network, which leads to the observed behavior. Received: 29 March 1999 Accepted in revised form: 16 July 1999     

pH-induced deswelling kinetics of sterically stabilized poly(2-vinylpyridine) microgels probed by stopped-flow light scattering

Near-monodisperse, sterically stabilized poly(2-vinylpyridine) (P2VP) microgels were synthesized by emulsion polymerization. These particles exhibited completely reversible pH-responsive swelling/deswelling behavior in aqueous solution. Stopped-flow light scattering was employed to investigate the kinetics of pH-induced deswelling in highly dilute dispersions. Upon a pH jump from 2 to various final solution pH values (>or=5.4), the scattered light intensity of an aqueous dispersion of a 1,960 nm microgel exhibited an abrupt initial increase, followed by a gradual decrease to the final equilibrium value. The whole microgel-to-latex deswelling process occurred over time scales of approximately 0.5-1.0 s, which is much slower than the kinetics for latex-to-microgel swelling. The microgel deswelling kinetics depends on the final pH, with a higher final pH leading to a faster rate of shrinkage. Close inspection of the deswelling kinetics during the early stages (<0.2 s) revealed that initial microgel collapse occurred within approximately 50 ms, with more rapid transitions being observed when higher final pH values were targeted. Addition of external salt significantly accelerates the kinetics of deswelling. Systematic studies of the microgel-to-latex transition for a series of six near-monodisperse P2VP particles (with swollen microgel diameters ranging from 1270 to 4230 nm) has also been investigated. The characteristic deswelling time for initial microgel collapse, tau deswell, correlated fairly well with the initial swollen microgel radius, R, in agreement with the Tanaka equation. Moreover, the collective diffusion coefficient of the gel network, D, calculated from the slope of the tau deswell- R (2) curve, was of the order of 10 (-7) cm (2) s (-1).     

Swelling behavior of poly(acrylic acid) gels in aqueous ethanol – effects of counterion species and ionic strength

The swelling behavior of poly(acrylic acid) (PAA) gels in aqueous ethanol (EtOH) was investigated. These gels were prepared by γ‐irradiation and pretreated in aqueous solutions of different pH levels in order to vary the charge density. With increasing pH of the pretreating solutions, a distinct collapse was observed for a PAANa gel in 40–60 vol.‐% EtOH. This effect was less pronounced in the presence of 0.1 M NaCl. Moreover, the deswelling regions were dependent on the counterion species of the used salt solutions, i. e. NaCl or CsCl.     

Synthesis and light scattering study of microgels with interpenetrating polymer networks

Monodispersed microgels composed of poly(acrylic acid) (PAAc) and poly(N-isopropylacrylamide) (PNIPAM) interpenetrating polymer networks (IPN) were synthesized by a two-step method, first preparing PNIPAM microgel and then polymerizing acrylic acid that interpenetrates into the PNIPAM network. The growth kinetics of the IPN particle formation was obtained by measuring the turbidity and particle hydrodynamic radius (Rh) as a function of reaction time. IPN and PNIPAM microgels were characterized and compared by dynamic and static light scattering techniques. The concentrated aqueous solutions of the PNIPAM-PAAc IPN microgels exhibit an inverse thermoreversible gelation. In contrast to polymer solutions of poly(NIPAM-co-AAc) that have the inverse thermoreversible gelation, our system can self-assemble into an ordered structure, displaying bright colors. Furthermore, IPN microgels undergo the reversible volume phase transitions in response to both pH and temperature changes associated with PAAc and PNIPAM networks, respectively.     

Synthesis,Characterization, and Silver Nanoparticles Fabrication in N-isopropylacrylamide-Based Polymer Microgels for Rapid Degradation of p-Nitrophenol

Multiresponsive poly(N-isopropylacrylamide-co-methacrylic acid) microgels were synthesized by precipitation polymerization in aqueous medium. Then silver-poly(N-isopropylacrylamide-co-methacrylic acid) hybrid microgels were prepared by in-situ reduction of silver ions. Formation of microgels was confirmed by Fourier transform infrared spectroscopic analysis. pH and temperature sensitivity of microgel was studied by dynamic light scattering. Hydrodynamic radius of microgels decreases with increase in temperature at pH 8.20 and show volume phase transition temperature around 45°C. At pH 2.65, hydrodynamic radius decreases with increase in temperatures upto 35°C but further increase in temperature causes aggregation and microgel becomes unstable due to increase of hydrophobicity. With increase in pH of medium, the hydrodynamic radius of microgels increases sigmoidally. Formation of silver nanoparticles inside microgel and pH dependence of surface plasmon resonance wavelength of the hybrid microgels were investigated by ultraviolet-visible spectroscopy. The value of surface plasmon resonance band and absorbance associated with surface plasmon resonance band increases with increases in pH of the medium. The apparent rate constant of reduction of p-nitrophenol was found to be linearly dependent on volume of hybrid microgels used as catalyst. The system has a potential to be used as effective catalyst for rapid degradation of industrial pollutant.     

浊度法表征温敏性微凝胶体积的相转变行为

以N-异丙基丙烯酰胺(NIPAM)、甲基丙烯酸(MAA)为单体,N,N-亚甲基双丙烯酰胺(MBA)为交联剂,制备了温敏性聚(N-异丙基丙烯酰胺)(PNIPAM)和具有温度、pH敏感性的聚(N-异丙基丙烯酰胺-co-甲基丙烯酸)(PNIPAM-MAA)微凝胶。通过测定不同温度和pH条件下微凝胶浊度变化,表征微凝胶的温度及pH敏感性,描述了NaCl浓度和pH对微凝胶体积相转变温度的影响。同时,测定了微凝胶的临界聚沉浓度及临界絮凝温度,表征了微凝胶的稳定性,讨论了影响微凝胶的稳定性因素。     

Transport of poly-L-lysine into oppositely charged poly(acrylic acid) microgels and its effect on gel deswelling

The interaction between poly-L-lysine (pLys) and oppositely charged poly(acrylic acid) (pAA) microgels (? approximately 80-120 microm) was studied by micromanipulator-assisted light microscopy and confocal laser scanning microscopy. The aim of this study was to investigate effects of peptide size, pH, and salt concentration on binding, transport, and distribution of pLys in pAA microgel particles and thereby also to outline the details of the gel deswelling in response to pLys binding and incorporation. Both peptide distribution and gel deswelling kinetics were found to be strongly influenced by the pLys molecular weight, originating partly from limited entry of large peptides into the gel particle core. Also pH was shown to influence both deswelling and pLys incorporation kinetics, with a decreased deswelling rate observed with increasing pH. These effects are determined by a complex interplay between the pH-dependence of both pLys and the gel network, also influencing volume transitions of the latter. Finally, salt concentration was shown to have a significant effect on both gel deswelling rate and pLys transport, with an increased electrolyte concentration resulting in decreased deswelling rate but also in an increased peptide transport rate within the microgel particles.     

Photo-, thermally, and pH-responsive microgels

Microgels with photo-, thermally, and pH-responsive properties in aqueous suspension have been synthesized and characterized using dynamic light scattering and UV-visible spectroscopy. The new route involved first preparing poly(N-isopropylacrylamide) (PNIPAM)-allylamine copolymer microgels and a spiropyran photochrome (SP) bearing a carboxylic acid group. Then the functionalized spiropyran was coupled to the microgel via an amide bond. The dark-equilibrated gel particles feature spiropyran molecules in the polar, merocyanine form. After irradiation of visible light, the particle size becomes smaller because spiropyran changes to the relatively nonpolar, closed spiro form. The PNIPAM-SP microgels undergo a volume phase transition in water from a swollen state to a collapsed state with increasing temperature under all light conditions. However, the transition temperature range of the PNIPAM-SP is much broader than that for the PNIPAM without SP. The PNIPAM-SP microgels are monodisperse and self-assemble into a crystalline lattice while in suspension. The UV-visible spectra of an aqueous suspension of PNIPAM-SP microgel in the dark-adapted, merocyanine form showed both an absorption peak around 512 nm due to the merocyanine (giving a reddish color to the suspension) and two sharp peaks from Bragg diffraction of colloidal crystallites. Upon visible irradiation, the 512-nm band bleached significantly due to spiropyran photoisomerization. The spiropyran photoisomerization and accompanying color changes of the suspension were reversible upon alternating dark, UV, and visible light irradiation. Due to the residues of amine groups, the swelling capability of PNIPAM-SP microgels reduces as the pH value is changed from 7 to 10.