Why is Re-Re bond formation/cleavage in [Re(bpy)(CO)3]2 different from that in [Re(CO)5]2? Experimental and theoretical studies on the dimers and fragments

The Re(NN)(CO)3(THF) (NN=bpy=2,2'-bipyridine or dmb=4,4'-dimethyl-2,2'-bipyridine) radical, produced by homolysis of [Re(NN)(CO)3]2 in THF solution by visible irradiation, dimerizes with rate constants kd=20 +/- 3 and 11 +/- 4 M(-1) s(-1) for NN=dmb and bpy, respectively. The dimerization processes are strikingly slow compared to those of typical metal radicals including Re(CO)5 (kd approximately 10(9) M(-1) s(-1)). In order to explain such slow reactions, we have performed B3LYP hybrid DFT and fully ab initio RHF and MP2 calculations on several conformations of [Re(bpy)(CO)3]2 (cis, trans, skewed cis, skewed trans) and [Re(CO)5]2 (staggered) and on their constituent monomer radicals and anions. The calculations show that the most stable geometry of [Re(bpy)(CO)3]2 is skewed cis, and the experimental infrared spectrum and photochemical properties of the [Re(bpy)(CO)3]2 dimer are best described by the calculated properties of the skewed cis conformer in which there is no low-lying unoccupied orbital that is predominantly sigma(MM) in character. The Re(bpy)(CO)3(THF) ligand radical is more stable than the 5-coordinate "17-electron" metal radical, Re(bpy)(CO)3, suggesting that the extremely slow dimerization rate most likely arises from the solvent blocking the binding site (i.e., the estimated fraction of the five-coordinate monomer is 1.6 x 10(-2)). Theoretical results are consistent with our experimental results that the dimerization process proceeds via the Re centered radical, which is involved in a pre-equilibrium favoring the ligand-centered radical. Furthermore, time-dependent DFT calculations on [Re(bpy)(CO)3]2 and [Re(bpy)(CO)3]- identify the origin of UV-vis absorption in THF.     

Re(eta(5)-C5H5)(CO)3]+ family of 17-electron compounds: monomer/dimer equilibria and other reactions

The anodic electrochemical oxidations of ReCp(CO)3 (1, Cp = eta(5)-C5H5), Re(eta(5)-C5H4NH2)(CO)3 (2), and ReCp*(CO)3 (3, Cp* = eta(5)-C5Me5), have been studied in CH2Cl2 containing [NBu4][TFAB] (TFAB = [B(C6F5)4]-) as supporting electrolyte. One-electron oxidations were observed with E(1/2) = 1.16, 0.79, and 0.91 V vs ferrocene for 1-3, respectively. In each case, rapid dimerization of the radical cation gave the dimer dication, [Re2Cp(gamma)2(CO)6]2+ (where Cp(gamma) represents a generic cyclopentadienyl ligand), which may be itself reduced cathodically back to the original 18-electron neutral complex ReCp(gamma)(CO)3. DFT calculations show that the SOMO of 1+ is highly Re-based and hybridized to point away from the metal, thereby facilitating the dimerization process and other reactions of the Re(II) center. The dimers, isolated in all three cases, have long metal-metal bonds that are unsupported by bridging ligands, the bond lengths being calculated as 3.229 A for [Re2Cp2(CO)6]2+ (1(2)2+) and measured as 3.1097 A for [Re2(C5H4NH2)2(CO)6]2+ (2(2)2+) by X-ray crystallography on [Re2(C5H4NH2)2(CO)6][TFAB]2. The monomer/dimer equilibrium constants are between K(dim) = 10(5) M(-1) and 10(7) M(-1) for these systems, so that partial dissociation of the dimers gives a modest amount of the corresponding monomer that is free to undergo radical cation reactions. The radical 1+ slowly abstracts a chlorine atom from dichloromethane to give the 18-electron complex [ReCp(CO)3Cl]+ as a side product. The radical cation 1+ acts as a powerful one-electron oxidant capable of effectively driving outer-sphere electron-transfer reactions with reagents having potentials of up to 0.9 V vs ferrocene.     

Increased reactivity of the *Cr(CO)3(C5Me5) radical with thiones versus thiols: a theoretical and experimental investigation

2-pyridinethione (2-mercaptopyridine, H-2mp) undergoes rapid oxidative addition with 2 mol of the 17-electron organometallic radical *Cr(CO)3Cp (where Cp*=C5Me5), yielding hydride H-Cr(CO)3Cp* and thiolate (eta1-2mp)Cr(CO)3Cp*. In a slower secondary reaction, (eta1-2mp)Cr(CO)3Cp* loses CO generating the N,S-chelate complex (eta2-2mp)Cr(CO)2Cp* for which the crystal structure is reported. The rate of 2-pyridine thione oxidative addition with *Cr(CO)3Cp* (abbreviated *Cr) in toluene best fits rate=kobs[H-2mp][*Cr]; kobs(288 K)=22 +/- 4 M(-1) s(-1); DeltaH++=4 +/- 1 kcal/mol; DeltaS++=- 40 +/- 5 cal/mol K. The rate of reaction is the same under CO or Ar, and the reaction of deuterated 2-pyridine thione (D-2mp) shows a negligible (inverse) kinetic isotope effect (kD/kH=1.06 +/- 0.10). The rate of decarbonylation of (eta1-2mp)Cr(CO)3Cp* forming (eta2-2mp)Cr(CO)2Cp* obeys simple first-order kinetics with kobs (288 K)=3.1x10(-4) s(-1), DeltaH++=23 +/- 1 kcal/mol, and DeltaS++=+ 5.0 +/- 2 cal/mol K. Reaction of 4-pyridine thione (4-mercaptopyridine, H-4mp) with *Cr(CO)3Cp* in THF and CH2Cl2 also follows second-order kinetics and is approximately 2-5 times faster than H-2mp in the same solvents. The relatively rapid nature of the thione versus thiol reactions is attributed to differences in the proposed 19-electron intermediate complexes, [*(S=C5H4N-H)Cr(CO)3Cp*] versus [*(H-S-C6H5)Cr(CO)3Cp*]. In comparison, reactions of pyridyl disulfides occur by a mechanism similar to that followed by aryl disulfides involving direct attack of the sulfur-sulfur bond by the metal radical. Calorimetric data indicate Cr-SR bond strengths for aryl and pyridyl derivatives are similar. The experimental conclusions are supported by B3LYP/6-311+G(3df,2p) calculations, which also provide additional insight into the reaction pathways open to the thione/thiol tautomers. For example, the reaction between H* radical and the 2-pyridine thione S atom yielding a thionyl radical is exothermic by approximately 30 kcal/mol. In contrast, the thiuranyl radical formed from the addition of H* to the 2-pyridine thiol S atom is predicted to be unstable, eliminating either H* or HS* without barrier.     

Electrochemical scanning tunneling microscopic observation of the preoxidation process of CO on Pt(111) electrode surface

Presented are sequential images of CO on Pt(111), observed with electrochemical scanning tunneling microscopy, during its electrochemical preoxidation process. In the course of the well-known phase transition from the (2 x 2)-3CO-alpha structure to the (radical 19 x radical 19)R23.4 degrees-13CO structure, various structures were observed: (2 x 2)-3CO-beta (Chem. Comm. 2006, 2191-2193), (1 x 1)-CO, and (radical 13 x radical 13)R46.1 degrees-9CO. Based on an analysis of the populations of the structures averaged over imaging time and imaged location at the preoxidation potential range (0-0.25 V vs Ag/AgCl), the structures of CO domains changed sequentially in the order of (2 x 2)-3CO-alpha, (2 x 2)-3CO-beta, (1 x 1)-CO, (radical 13 x radical 13)R46.1 degrees-9CO, and (radical 19 x radical 19)R23.4 degrees-13CO as the potential shifted from 0 to 0.25 V. Such a sequential structural change demonstrates that the structures of (2 x 2)-3CO-beta, (1 x 1)-CO, and (radical 13 x radical 13)R46.1 degrees-9CO are transient ones during the preoxidation of CO on Pt(111). Discussed are the transient structures in terms of various aspects, such as the absence of CO in solution and the origin of compressed structures.     

Reactions of hydrated electron with various radicals: spin factor in diffusion-controlled reactions

The reactions of hydrated electron (eaq-) with various radicals have been studied in pulse radiolysis experiments. These radicals are hydroxyl radical (*OH), sulfite radical anion (*SO3-), carbonate radical anion (CO3*-), carbon dioxide radical anion (*CO2-), azidyl radical (*N3), dibromine radical anion (Br2*-), diiodine radical anion (I2*-), 2-hydroxy-2-propyl radical (*C(CH3)2OH), 2-hydroxy-2-methyl-1-propyl radical ((*CH2)(CH3)2COH), hydroxycyclohexadienyl radical (*C6H6OH), phenoxyl radical (C6H5O*), p-methylphenoxyl radical (p-(H3C)C6H4O*), p-benzosemiquinone radical anion (p-OC6H4O*-), and phenylthiyl radical (C6H5S*). The kinetics of eaq- was followed in the presence of the counter radicals in transient optical absorption measurements. The rate constants of the eaq- reactions with radicals have been determined over a temperature range of 5-75 degrees C from the kinetic analysis of systems of multiple second-order reactions. The observed high rate constants for all the eaq- + radical reactions have been analyzed with the Smoluchowski equation. This analysis suggests that many of the eaq- + radical reactions are diffusion-controlled with a spin factor of 1/4, while other reactions with *OH, *N3, Br2*-, I2*-, and C6H5S* have spin factors significantly larger than 1/4. Spin dynamics for the eaq-/radical pairs is discussed to explain the different spin factors. The reactions with *OH, *N3, Br2*-, and I2*- have also been found to have apparent activation energies less than that for diffusion control, and it is suggested that the spin factors for these reactions decrease with increasing temperature. Such a decrease in spin factor may reflect a changing competition between spin relaxation/conversion and diffusive escape from the radical pairs.     

The carbonate radical: its reactivity with oxygen, ammonia, amino acids, and melanins

The carbonate radical (CO 3 (*-)) is of importance in biology and chemistry. We used pulse radiolysis to generate the CO 3 (*-) radical and show there is no reaction with oxygen. However, in the presence of ammonia the CO 3 (*-) radical is removed by NO (*), which itself arises from the scavenging of NH 2 (*) by oxygen, and the mechanism of this process is reported. The CO 3 (*-) radical shows complex decay patterns in the presence of ammonia, which can be understood as a balance between the radical-radical reaction CO 3 (*-) + CO 3 (*-) and CO 3 (*-) + NH 2 (*) (the amino radical). Also, we report reactivity with glycine and alanine and with melanin models. The CO 3 (*-) reacts with both dopa-melanin (DM, a model of black eumelanin) and with cysteinyl-dopa-melanin (CDM, a model of red/blond phaeomelanin). However, the reaction rate constant is much higher with CDM than with DM.     

Spectroscopic detection and theoretical confirmation of the role of Cr2(CO)5(C5R5)2 and .Cr(CO)2(ketene)(C5R5) as intermediates in carbonylation of N=N=CHSiMe3 to O=C=CHSiMe3 by .Cr(CO)3(C5R5) (R = H, CH3)

Conversion of N=N=CHSiMe3 to O=C=CHSiMe3 by the radical complexes .Cr(CO)3C5R5 (R = H, CH3) derived from dissociation of [Cr(CO)3(C5R5)]2 have been investigated under CO, Ar, and N2 atmospheres. Under an Ar or N2 atmosphere the reaction is stoichiometric and produces the Cr[triple bond]Cr triply bonded complex [Cr(CO)2(C5R5)]2. Under a CO atmosphere regeneration of [Cr(CO)3(C5R5)]2 (R = H, CH3) occurs competitively and conversion of diazo to ketene occurs catalytically as well as stoichiometrically. Two key intermediates in the reaction, .Cr(CO)2(ketene)(C5R5) and Cr2(CO)5(C5R5)2 have been detected spectroscopically. The complex .Cr(13CO)2(O=13C=CHSiMe3)(C5Me5) has been studied by electron spin resonance spectroscopy in toluene solution: g(iso) = 2.007; A(53Cr) = 125 MHz; A(13CO) = 22.5 MHz; A(O=13C=CHSiMe3) = 12.0 MHz. The complex Cr2(CO)5(C5H5)2, generated in situ, does not show a signal in its 1H NMR and reacts relatively slowly with CO. It is proposed to be a ground-state triplet in keeping with predictions based on high level density functional theory (DFT) studies. Computed vibrational frequencies are also in good agreement with experimental data. The rates of CO loss from 3Cr2(CO)5(C5H5)2 producing 1[Cr(CO)2(C5H5)]2 and CO addition to 3Cr2(CO)5(C5H5)2 producing 1[Cr(CO)3(C5H5)]2 have been measured by kinetics and show DeltaH approximately equal 23 kcal mol(-1) for both processes. Enthalpies of reduction by Na/Hg under CO atmosphere of [Cr(CO)n(C5H5)]2 (n = 2,3) have been measured by solution calorimetry and provide data for estimation of the Cr[triple bond]Cr bond strength in [Cr(CO)2(C5H5)]2 as 72 kcal mol(-1). The complex [Cr(CO)2(C5H5)]2 does not readily undergo 13CO exchange at room temperature or 50 degrees C implying that 3Cr2(CO)5(C5H5)2 is not readily accessed from the thermodynamically stable complex [Cr(CO)2(C5H5)]2. A detailed mechanism for metalloradical based conversion of diazo and CO to ketene and N2 is proposed on the basis of a combination of experimental and theoretical data.     

The reaction of phenyl radical with molecular oxygen: a G2M study of the potential energy surface

Ab initio G2M calculations have been performed to investigate the potential energy surface for the reaction of C6H5 with O2. The reaction is shown to start with an exothermic barrierless addition of O2 to the radical site of C6H5 to produce phenylperoxy (1) and, possibly, 1,2-dioxaspiro[2.5]octadienyl (dioxiranyl, 8) radicals. Next, 1 loses the terminal oxygen atom to yield the phenoxy + O products (3) or rearranges to 8. The dioxiranyl can further isomerize to a seven-member ring 2-oxepinyloxy radical (10), which can give rise to various products including C5H5 + CO2, pyranyl + CO, o-benzoquinone + H, and 2-oxo-2,3-dihydrofuran-4-yl + C2H2. Once 10 is produced, it is unlikely to go back to 8 and 1, because the barriers separating 10 from the products are much lower than the reverse barrier from 10 to 8. Thus, the branching ratio of C6H5O + O against the other products is mostly controlled by the critical transition states between 1 and 3, 1 and 8, and 8 and 10. According to the calculated barriers, the most favorable product channel for the decomposition of 10 is C5H5 + CO2, followed by pyranyl + CO and o-benzoquinone + H. Since C6H5O + O and C5H5 + CO2 are expected to be the major primary products of the C6H5 + O2 reaction and thermal decomposition of C6H5O leads to C5H5 + CO, cyclopentadienyl radicals are likely to be the major product of phenyl radical oxidation, and so it results in degradation of the six-member aromatic ring to the five-member cyclopentadienyl ring. Future multichannel RRKM calculations of reaction rate constants are required to support these conclusions and to quantify the product branching ratios at various combustion conditions.     

Kinetics and thermodynamics of H. transfer from (eta5-C5R5)Cr(CO)3H (R = Ph,Me, H) to methyl methacrylate and styrene

The rates of H/D exchange have been measured between (a) the activated olefins methyl methacrylate-d(5) and styrene-d(8), and (b) the Cr hydrides (eta(5)-C(5)Ph(5))Cr(CO)(3)H (2a), (eta(5)-C(5)Me(5))Cr(CO)(3)H (2b), and (eta(5)-C(5)H(5))Cr(CO)(3)H (2c). With a large excess of the deuterated olefin the first exchange goes to completion before subsequent exchanges begin, at a rate first order in olefin and in hydride. (Hydrogenation is insignificant except with styrene and CpCr(CO)(3)H; in most cases, the radicals arising from the first H. transfer are too hindered to abstract another H. .) Statistical corrections give the rate constants k(reinit) for H. transfer to the olefin from the hydride. With MMA, k(reinit) decreases substantially as the steric bulk of the hydride increases; with styrene, the steric bulk of the hydride has little effect. At longer times, the reaction of MMA or styrene with 2a gives the corresponding metalloradical 1a as termination depletes the concentration of the methyl isobutyryl radical 3 or the alpha-methylbenzyl radical 4; computer simulation of [1a] as f(t) gives an estimate of k(tr), the rate constant for H. transfer from 3 or 4 back to Cr. These rate constants imply a DeltaG (50 degrees C) of +11 kcal/mol for H. transfer from 2a to MMA, and a DeltaG (50 degrees C) of +10 kcal/mol for H. transfer from 2a to styrene. The CH(3)CN pK(a) of 2a, 11.7, implies a BDE for its Cr-H bond of 59.6 kcal/mol, and DFT calculations give 58.2 kcal/mol for the Cr-H bond in 2c. In combination the kinetic DeltaG values, the experimental BDE for 2a, and the calculated DeltaS values for H. transfer imply a C-H BDE of 45.6 kcal/mol for the methyl isobutyryl radical 3 (close to the DFT-calculated 49.5 kcal/mol), and a C-H BDE of 47.9 kcal/mol for the alpha-methylbenzyl radical 4 (close to the DFT-calculated 49.9 kcal/mol). A solvent cage model suggests 46.1 kcal/mol as the C-H BDE for the chain-carrying radical in MMA polymerization.     

EPR and DFT studies of the structure of phosphinyl radicals complexed by a pentacarbonyl transition metal

Paramagnetic complexes M(CO)5P(C6H5)2, with M = Cr, Mo, W, have been trapped in irradiated crystals of M(CO)5P(C6H5)3 (M = Cr, Mo, W) and M(CO)5PH(C6H5)2 (M = Cr, W) and studied by EPR. The radiolytic scission of a P-C or a P-H bond, responsible for the formation of M(CO)5P(C6H5)2, is consistent with both the number of EPR sites and the crystal structures. The g and 31P hyperfine tensors measured for M(CO)5P(C6H5)2 present some of the characteristics expected for the diphenylphosphinyl radical. However, compared to Ph2P*, the 31P isotropic coupling is larger, the dipolar coupling is smaller, and for Mo and W compounds, the g-anisotropy is more pronounced. These properties are well predicted by DFT calculations. In the optimized structures of M(CO)5P(C6H5)2 (M = Cr, Mo, W), the unpaired electron is mainly confined in a phosphorus p-orbital, which conjugates with the metal d(xz) orbital. The trapped species can be described as a transition metal-coordinated phosphinyl radical.     

Characterization and reactions of previously elusive 17-electron cations: electrochemical oxidations of (C(6)H(6))Cr(CO)(3) and (C(5)H(5))Co(CO)(2) in the presence of [B(C(6)F(5))(4)](-)

The electrochemical oxidations of (C6H6)Cr(CO)3, 1, and (C5H5)Co(CO)2, 2, when carried out in CH2Cl2/[NBu4][B(C6F5)4], allow the physical or chemical characterization of the 17-electron cations 1+ and 2+ at room temperature. The generation of 1+ on a synthetic time scale permits an electrochemical "switch" process involving facile substitution of CO by PPh3 as a route to (C6H6)Cr(CO)2PPh3. The radical 2+ undergoes a second-order reaction to give a product assigned as the metal-metal bonded dimer dication [Cp2Co2(CO)4]2+. The new anodic chemistry of these often-studied 18-electron compounds is made possible by increases in the solubility and thermal stability of the cation radicals in media containing the poorly nucleophilic anion [B(C6F5)4]-, TFAB.     

Thermal decomposition mechanisms of the methoxyphenols: formation of phenol, cyclopentadienone, vinylacetylene, and acetylene

The pyrolyses of the guaiacols or methoxyphenols (o-, m-, and p-HOC(6)H(4)OCH(3)) have been studied using a heated SiC microtubular (μ-tubular) reactor. The decomposition products are detected by both photoionization time-of-flight mass spectroscopy (PIMS) and matrix isolation infrared spectroscopy (IR). Gas exiting the heated SiC μ-tubular reactor is subject to a free expansion after a residence time of approximately 50-100 μs. The PIMS reveals that, for all three guaiacols, the initial decomposition step is loss of methyl radical: HOC(6)H(4)OCH(3) → HOC(6)H(4)O + CH(3). Decarbonylation of the HOC(6)H(4)O radical produces the hydroxycyclopentadienyl radical, C(5)H(4)OH. As the temperature of the μ-tubular reactor is raised to 1275 K, the C(5)H(4)OH radical loses a H atom to produce cyclopentadienone, C(5)H(4)═O. Loss of CO from cyclopentadienone leads to the final products, acetylene and vinylacetylene: C(5)H(4)═O → [CO + 2 HC≡CH] or [CO + HC≡C-CH═CH(2)]. The formation of C(5)H(4)═O, HCCH, and CH(2)CHCCH is confirmed with IR spectroscopy. In separate studies of the (1 + 1) resonance-enhanced multiphoton ionization (REMPI) spectra, we observe the presence of C(6)H(5)OH in the molecular beam: C(6)H(5)OH + λ(275.1?nm) → [C(6)H(5)OH ?] + λ(275.1nm) → C(6)H(5)OH(+). From the REMPI and PIMS signals and previous work on methoxybenzene, we suggest that phenol results from a radical/radical reaction: CH(3) + C(5)H(4)OH → [CH(3)-C(5)H(4)OH]* → C(6)H(5)OH + 2H.     

The solvent cage effect: is there a spin barrier to recombination of transition metal radicals?

This investigation explored whether there is a spin barrier to recombination of first- and second-row transition metal-centered radicals in a radical cage pair. To answer this question, the recombination efficiencies of photochemically generated radical cage pairs (denoted as FcP) were measured in the presence and absence of an external heavy atom probe. Two methods were employed for measuring the cage effect. The first method was femtosecond pump-probe transient absorption spectroscopy, which directly measured FcP from reaction kinetics, and the second method (referred to herein as the "steady-state" method) obtained FcP from quantum yields for the radical trapping reaction with CCl4 as a function of solvent viscosity. Both methods generated radical cage pairs by photolysis (lambda = 515 nm for the pump probe method and lambda = 546 nm for the steady-state method) of Cp'2Mo2(CO)6 (Cp' = eta(5)-C5H4CH3). In addition, radical cage pairs generated from Cp'2Fe2(CO)4 and Cp*2TiCl2 (Cp* = eta(5)-C5(CH3)5) were studied by the steady-state method. The pump-probe method used p-dichlorobenzene as the heavy atom perturber, whereas the steady-state method used iodobenzene. For both methods and for all the radical caged pairs investigated, there were no observable heavy atom effects, from which it is concluded there is no spin barrier to recombination.     

Synthesis, structure, and thermochemistry of the formation of the metal-metal bonded dimers [Mo(mu-TeAr)(CO)3(PiP3)]2 (Ar = phenyl, naphthyl) by phosphine elimination from *Mo(TePh)(CO)3(PiPr3)2

The complexes (*TeAr)Mo(CO)3(PiPr3)2 (Ar = phenyl, naphthyl; iPr = isopropyl) slowly eliminate PiPr3 at room temperature in a toluene solution to quantitatively form the dinuclear complexes [Mo(mu-TeAr)(CO)3(PiPr3)]2. The crystal structure of [Mo(mu-Te-naphthyl)(CO)3(PiPr3)]2 is reported and has a Mo-Mo distance of 3.2130 A. The enthalpy of dimerization has been measured and is used to estimate a Mo-Mo bond strength on the order of 30 kcal mol-1. Kinetic studies show the rate of formation of the dimeric chalcogen bridged complex is best fit by a rate law first order in (*TeAr)Mo(CO)3(PiPr3)2 and inhibited by added PiPr3. The reaction is proposed to occur by initial dissociation of a phosphine ligand and not by radical recombination of 2 mol of (*TeAr)Mo(CO)3(PiPr3)2. Reaction of (*TePh)Mo(CO)3(PiPr3)2, with L = pyridine (py) or CO, is rapid and quantitative at room temperature to form PhTeTePh and Mo(L)(CO)3(PiPr3)2, in keeping with thermochemical predictions. The rate of reaction of (*TeAr)W(CO)3(PiPr3)2 and CO is first-order in the metal complex and is proposed to proceed by the associative formation of the 19 e- radical complex (*TePh)W(CO)4(PiPr3)2 which extrudes a *TePh radical.     

The Complexed 1,3‐Diphospha‐2‐Arsaallyl Radical and Its Cationic and Anionic Derivatives

Photolysis of [Cp*As{W(CO)₅}₂] ( 1 a ) in the presence of Mes*P?PMes* (Mes*=2,4,6‐tri‐tert‐butylphenyl) leads to the novel 1,3‐diphospha‐2‐arsaallyl radical [(CO)₅W(μ,η²:η¹‐P₂AsMes*₂)W(CO)₄] ( 2 a ). The frontier orbitals of the radical 2 a are indicative of a stable π‐allylic system that is only marginally influenced by the d orbitals of the two tungsten atoms. The SOMO and the corresponding spin density distribution of the radical 2 a show that the unpaired electron is preferentially located at the two equivalent terminal phosphorus atoms, which has been confirmed by EPR spectroscopy. The protonated derivative of 2 a , the complex [(CO)₅W(μ,η²:η¹‐P₂As(H)Mes*₂)W(CO)₄] ( 6 a ) is formed during chromatographic workup, whereas the additional products [Mes*P?PMes*{W(CO)₅}] as the Z‐isomer ( 3 ) and the E‐isomer ( 4 ), and [As₂{W(CO)₅}₃] ( 5 ) are produced as a result of a decomposition reaction of radical 2 a . Reduction of radical 2 a yields the stable anion [(CO)₅W(μ,η²:η¹‐P₂AsMes*₂)W(CO)₄]^? in 7 a , whereas upon oxidation the corresponding cationic complex [(CO)₅W(μ,η²:η¹‐P₂AsMes*₂)W(CO)₄][SbF₆] ( 8 a ) is formed, which is only stable at low temperatures in solution. Compounds 2 a , 7 a , and 8 a represent the hitherto elusive complexed redox congeners of the diphospha‐arsa‐allyl system. The analogous oxidation of the triphosphaallyl radical [(CO)₅W(μ,η²:η¹‐ P₃Mes*₂)W(CO)₄] ( 2 b ) also leads to an allyl cation, which decomposes under CH activation to the phosphine derivative [(CO)₅W{μ,η²:η¹‐P₃(Mes*)(C₅H₂tBu₂C(CH₃)₂CH₂)}W(CO)₄] ( 9 ), in which a CH bond of a methyl group of the Mes* substituent has been activated. All new products have been characterized by NMR spectrometry and IR spectroscopy, and compounds 2 a , 3 , 6 a , 7 a , and 9 by X‐ray diffraction analysis.     

Infrared absorption of gaseous benzoyl radical C6H5CO recorded with a step-scan Fourier-transform spectrometer

A step-scan Fourier-transform infrared spectrometer coupled with a multipass absorption cell was utilized to monitor the gaseous transient species benzoyl radical, C(6)H(5)CO. C(6)H(5)CO was produced either from photolysis of acetophenone, C(6)H(5)C(O)CH(3), at 248 nm or in reactions of phenyl radical (C(6)H(5)) with CO; C(6)H(5) was produced on photolysis of C(6)H(5)Br at 248 nm. One intense band at 1838 ± 1 cm(-1), one weak band at 1131 ± 3 cm(-1), and two extremely weak bands at 1438 ± 5 and 1590 ± 10 cm(-1) are assigned to the C═O stretching (ν(6)), the C-C stretching mixed with C-H deformation (ν(15)), the out-of-phase C(1)C(2)C(3)/C(5)C(6)C(1) symmetric stretching (ν(10)), and the in-phase C(1)C(2)C(3)/C(4)C(5)C(6) antisymmetric stretching (ν(7)) modes of C(6)H(5)CO, respectively. These observed vibrational wavenumbers and relative IR intensities agree with those reported for C(6)H(5)CO isolated in solid Ar and with values predicted for C(6)H(5)CO with the B3LYP/aug-cc-pVDZ method. The rotational contours of the two bands near 1838 and 1131 cm(-1) simulated according to rotational parameters predicted with the B3LYP/aug-cc-pVDZ method fit satisfactorily with the experimental results. Additional products BrCO, C(6)H(5)C(O)Br, and C(6)H(5)C(O)C(6)H(5) were identified in the C(6)H(5)Br/CO/N(2) experiments; the kinetics involving C(6)H(5)CO and C(6)H(5)C(O)Br are discussed.     

Ion-Pair Charge Transfer Photochemistry in Rhenium(I) Borate Salts

The photophysics and photochemistry of the salt [(bpy)Re(CO)(3)(py)(+)][BzBPh(3)(-)] (ReBo, where bpy = 2,2'-bipyridine, py = pyridine, Bz = C(6)H(5)CH(2) and Ph = C(6)H(5)) has been investigated in THF and CH(3)CN solutions. UV-visible absorption and steady-state emission spectroscopy indicates that in THF ReBo exists primairly as an ion-pair. A weak absorption band is observed for the salt in THF solution that is assigned to an optical ion-pair charge transfer transition. Stern-Volmer emission quenching studies indicate that BzBPh(3)(-) quenches the luminescent dpi (Re) --> pi (bpy) metal-to-ligand charge transfer excited state of the (bpy)Re(CO)(3)(py)(+) chromophore. The quenching is attributed to electron transfer from the benzylborate anion to the photoexcited Re(I) complex, (bpy(-)(*))Re(II)(CO)(3)(py)(+) + BzBPh(3)(-) --> (bpy(-)(*))Re(I)(CO)(3)(py) + BzBPh(3)(*). Laser flash photolysis studies reveal that electron transfer quenching leads to irreversible reduction of the Re(I) cation to (bpy(-)(*))Re(I)(CO)(3)(py). Photoinduced electron transfer is irreversible owing to rapid C-B bond fragmentation in the benzylboranyl radical, PhCH(2)BPh(3)(*) --> PhCH(2)(*) + BPh(3)(*). Quantitative laser flash photolysis experiments show that the quantum efficiency for production of the reduced complex (bpy(-)(*))Re(I)(CO)(3)(py) is unity, suggesting that C-B bond fragmentation in the benzylboranyl radical occurs more rapidly than return electron transfer within the geminate radical pair that is formed by photoinduced electron transfer.     

Synthesis and P-P cleavage reactions of [P(X)X']2; X-ray structures of [Co[P(X)X'](CO)3] and P4[P(X)X']2[X = N(SiMe3)2, X'= NPri2

Treatment of P(X)(X')Cl with KC8 gave the crystalline diphosphine [P(X)X']2 (1) which dissociated reversibly into the phosphinyl radical *P(X)X' (2), a plausible intermediate in the reaction of with [Cr(CO)6], [Co(NO)(CO)3] or P4, yielding [Cr[P(X)X']2(CO)3] (3), [Co[P(X)X'](CO)3] (4), or 1,4-P4[P(X)X']2 (5); the P(X)X' substituent is pyramidal at P in but planar in [X = N(SiMe3)2, X'= NPri2].     

Synthesis and Chemical and Electrochemical Characterization of Fe-S Carbonyl Clusters. X-ray Crystal Structures of [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)] and [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)

A reinvestigation of the redox behavior of the [Fe(3)(&mgr;(3)-S)(CO)(9)](2)(-) dianion led to the isolation and characterization of the new [Fe(5)S(2)(CO)(14)](2)(-), as well as the known [Fe(6)S(6)(CO)(12)](2)(-) dianion. As a corollary, new syntheses of the [Fe(3)S(CO)(9)](2)(-) dianion are also reported. The [Fe(5)S(2)(CO)(14)](2)(-) dianion has been obtained by oxidative condensation of [Fe(3)S(CO)(9)](2)(-) induced by tropylium and Ag(I) salts or SCl(2), or more straightforwardly through the reaction of [Fe(4)(CO)(13)](2)(-) with SCl(2). The [Fe(6)S(6)(CO)(12)](2)(-) dianion has been isolated as a byproduct of the synthesis of [Fe(3)S(CO)(9)](2)(-) and [Fe(5)S(2)(CO)(14)](2)(-) or by reaction of [Fe(4)(CO)(13)](2)(-) with elemental sulfur. The structures of [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)] and [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)] were determined by single-crystal X-ray diffraction analyses. Crystal data: for [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)], monoclinic, space group P2(1)/c (No. 14), a = 24.060(5), b = 14.355(6), c = 23.898(13) ?, beta = 90.42(3) degrees, Z = 4; for [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)], monoclinic, space group C2/c (No. 15), a = 34.424(4), b = 14.081(2), c = 19.674(2) ?, beta = 115.72(1) degrees, Z = 4. The new [Fe(5)S(2)(CO)(14)](2)(-) dianion shows a "bow tie" arrangement of the five metal atoms. The two Fe(3) triangles sharing the central Fe atom are not coplanar and show a dihedral angle of 55.08(3) degrees. Each Fe(3) moiety is capped by a triply bridging sulfide ligand. The 14 carbonyl groups are all terminal; two are bonded to the unique central atom and three to each peripheral iron atom. Protonation of the [Fe(5)S(2)(CO)(14)](2)(-) dianion gives reversibly rise to the corresponding [HFe(5)S(2)(CO)(14)](-) monohydride derivative, which shows an (1)H-NMR signal at delta -21.7 ppm. Its further protonation results in decomposition to mixtures of Fe(2)S(2)(CO)(6) and Fe(3)S(2)(CO)(9), rather than formation of the expected H(2)Fe(5)S(2)(CO)(14) dihydride. Exhaustive reduction of [Fe(5)S(2)(CO)(14)](2)(-) with sodium diphenyl ketyl progressively leads to fragmentation into [Fe(3)S(CO)(9)](2)(-) and [Fe(CO)(4)](2)(-), whereas electrochemical, as well as chemical oxidation with silver or tropylium tetrafluoroborate, in dichloromethane, generates the corresponding [Fe(5)S(2)(CO)(14)](-) radical anion which exhibits an ESR signal at g = 2.067 at 200 K. The electrochemical studies also indicated the existence of a subsequent one-electron anodic oxidation which possesses features of chemical reversibility in dichloromethane but not in acetonitrile solution. A reexamination of the electrochemical behavior of the [Fe(3)S(CO)(9)](2)(-) dianion coupled with ESR monitoring enabled the spectroscopic characterization of the [Fe(3)S(CO)(9)](-) radical monoanion and demonstrated its direct involvement in the generation of the [Fe(5)S(2)(CO)(14)](n)()(-) (n = 0, 1, 2) system.     

Kinetics of the HCCO + NO2 reaction

The kinetics of the HCCO + NO2 reaction were investigated using a laser photolysis/infrared diode laser absorption technique. Ethyl ethynyl ether (C2H5OCCH) was used as the HCCO radical precursor. Transient infrared detection of the HCCO radical was used to determine a total rate constant fit to the following expression: k1= (2.43 +/- 0.26) x 10(-11) exp[(171.1 +/- 36.9)/T] cm3 molecule(-1) s(-1) over the temperature range of 298-423 K. Transient infrared detection of CO, CO2, and HCNO products was used to determine the following branching ratios at 298 K: phi(HCO + NO + CO) = 0.60 +/- 0.05 and phi(HCNO + CO2) = 0.40 +/- 0.05.