Activation of the C-O bond on the surface of palladium: An <Emphasis Type="Italic">In situ</Emphasis> study by X-ray photoelectron spectroscopy and sum frequency generation

An in situ study of the adsorption of CO on atomically smooth and defect Pd(111) surfaces was performed over wide ranges of temperatures (200–400 K) and pressures (10^–6-1 mbar) by X-ray photoelectron spectroscopy and sum frequency generation. Both of the techniques indicated that CO was adsorbed as three-fold hollow, bridging, and terminal species to form well-known ordered structures on the surface. In the course of the in situ experiments, no signs of CO dissociation or of the formation of carbonyl structures (Pd(CO)_n, n > 1) were detected. The mechanism of C-O bond activation in the course of methanol decomposition on the surface of palladium was considered. It was found that the adsorption of methanol on the surface of palladium essentially depends on pressure. Along with the well-known reaction path of methanol dehydrogenation to CO and hydrogen, a slow process of methanol decomposition with C-O bond cleavage was observed at elevated pressures. In this case, the formation of carbon deposits finally resulted in the carbonization and complete deactivation of the surface. A mechanism for C-O bond activation on the surface of palladium was proposed; the geometry of adsorption complexes plays an important role in this mechanism.__________Translated from Kinetika i Kataliz, Vol. 46, No. 2, 2005, pp. 288–301.Original Russian Text Copyright © 2005 by Kaichev, Bukhtiyarov, Rupprechter, Freund.     

Mechanisms of methanol decomposition on platinum: A combined experimental and ab initio approach

The dual path mechanism for methanol decomposition on well-defined low Miller index platinum single crystal planes, Pt(111), Pt(110), and Pt(100), was studied using a combination of chronoamperometry, fast scan cyclic voltammetry, and theoretical methods. The main focus was on the electrode potential range when the adsorbed intermediate, CO(ad), is stable. At such "CO stability" potentials, the decomposition proceeds through a pure dehydrogenation reaction, and the dual path mechanism is then independent of the electrode-substrate surface structure. However, the threshold potential where the decomposition of methanol proceeds via parallel pathways, forming other than CO(ad) products, depends on the surface structure. This is rationalized theoretically. To gain insights into the controlling surface chemistry, density functional theory calculations for the energy of dehydrogenation were used to approximate the potential-dependent methanol dehydrogenation pathways over aqueous-solvated platinum interfaces.     

CO and methanol adsorption on (2 × 1)Pt(110) and ion‐eroded Pt(111) model catalysts

Methanol adsorption on ion‐sputtered Pt(111) surface exhibiting high concentration of vacancy islands and on (2 × 1)Pt(110) single crystal were investigated by means of photoelectron spectroscopy (PES) and thermal desorption spectroscopy. The measurements showed that methanol adsorbed at low temperature on sputtered Pt(111) and on (2 × 1)Pt(110) surfaces decomposed upon heating. The PES data of methanol adsorption were compared to the data of CO adsorbed on the same Pt single crystal surfaces. In the case of the sputtered Pt(111) surface, the dehydrogenation of H_xCO intermediates is followed by the CO bond breakage. On the (2 × 1)Pt(110) surface, carbon monoxide, as product of methanol decomposition, desorbed molecularly without appearance of any traces of atomic carbon. By comparing both platinum surfaces we conclude that methanol decomposition occurs at higher temperature on sputtered Pt(111) than on (2 × 1)Pt(110). Copyright © 2010 John Wiley & Sons, Ltd.     

Experimental and DFT studies of the conversion of ethanol and acetic acid on PtSn-based catalysts

Reaction kinetics studies were conducted for the conversions of ethanol and acetic acid over silica-supported Pt and Pt/Sn catalysts at temperatures from 500 to 600 K. Addition of Sn to Pt catalysts inhibits the decomposition of ethanol to CO, CH4, and C2H6, such that PtSn-based catalysts are active for dehydrogenation of ethanol to acetaldehyde. Furthermore, PtSn-based catalysts are selective for the conversion of acetic acid to ethanol, acetaldehyde, and ethyl acetate, whereas Pt catalysts lead mainly to decomposition products such as CH4 and CO. These results are interpreted using density functional theory (DFT) calculations for various adsorbed species and transition states on Pt(111) and Pt3Sn(111) surfaces. The Pt3Sn alloy slab was selected for DFT studies because results from in situ (119)Sn M?ssbauer spectroscopy and CO adsorption microcalorimetry of silica-supported Pt/Sn catalysts indicate that Pt-Sn alloy is the major phase present. Accordingly, results from DFT calculations show that transition-state energies for C-O and C-C bond cleavage in ethanol-derived species increase by 25-60 kJ/mol on Pt3Sn(111) compared to Pt(111), whereas energies of transition states for dehydrogenation reactions increase by only 5-10 kJ/mol. Results from DFT calculations show that transition-state energies for CH3CO-OH bond cleavage increase by only 12 kJ/mol on Pt3Sn(111) compared to Pt(111). The suppression of C-C bond cleavage in ethanol and acetic acid upon addition of Sn to Pt is also confirmed by microcalorimetric and infrared spectroscopic measurements at 300 K of the interactions of ethanol and acetic acid with Pt and PtSn on a silica support that had been silylated to remove silanol groups.     

Methanol dehydrogenation and oxidation on Pt(111) in alkaline solutions

Adsorption, dehydrogenation, and oxidation of methanol on Pt(111) in alkaline solutions has been examined from a fundamental mechanistic perspective, focusing on the role of adsorbate-adsorbate interactions and the effect of defects on reactivity. CO has been confirmed as the main poisoning species, affecting the rate of methanol dehydrogenation primarily through repulsive interactions with methanol dehydrogenation intermediates. At direct methanol fuel cell (DMFC)-relevant potentials, methanol oxidation occurs almost entirely through a CO intermediate, and the rate of CO oxidation is the main limiting factor in methanol oxidation. Small Pt island defects greatly enhance CO oxidation, though they are effective only when the CO coverage is 0.20 ML or higher. Large Pt islands enhance CO oxidation as well, but unlike small Pt islands, they also promote methanol dehydrogenation. Perturbations in electronic structure are responsible for the CO oxidation effect of defects, but the role of large Pt islands in promoting methanol dehydrogenation is primarily explained by surface geometric structure.     

Decomposition pathways of methanol on the PtAu(111) bimetallic surface: a first-principles study

Systematic density functional studies revealed that PtAu(111) significantly alters the reaction kinetics of methanol oxidation from that on Pt(111). PtAu(111) facilitates the reaction path that starts from cleavage of the OH bond. Furthermore, it prevents CH(2)O from immediate decomposition as on the clean Pt(111) surface. This indicates that proper arrangement of Au and Pt sites offers great opportunities for non-CO(ad) paths for high H productivity in fuel cells.     

Comprehensive mechanism and structure-sensitivity of ethanol oxidation on platinum: new transition-state searching method for resolving the complex reaction network

Ethanol oxidation on Pt is a typical multistep and multiselectivity heterogeneous catalytic process. A comprehensive understanding of this fundamental reaction would greatly benefit design of catalysts for use in direct ethanol fuel cells and the degradation of biomass-derived oxygenates. In this work, the reaction network of ethanol oxidation on different Pt surfaces, including close-packed Pt{111}, stepped Pt{211}, and open Pt{100}, is explored thoroughly with an efficient reaction path searching method, which integrates our new transition-state searching technique with periodic density functional theory calculations. Our new technique enables the location of the transition state and saddle points for most surface reactions simply and efficiently by optimization of local minima. We show that the selectivity of ethanol oxidation on Pt depends markedly on the surface structure, which can be attributed to the structure-sensitivity of two key reaction steps: (i) the initial dehydrogenation of ethanol and (ii) the oxidation of acetyl (CH3CO). On open surface sites, ethanol prefers C-C bond cleavage via strongly adsorbed intermediates (CH2CO or CHCO), which leads to complete oxidation to CO2. However, only partial oxidizations to CH3CHO and CH3COOH occur on Pt{111}. Our mechanism points out that the open surface Pt{100} is the best facet to fully oxidize ethanol at low coverages, which sheds light on the origin of the remarkable catalytic performance of Pt tetrahexahedra nanocrystals found recently. The physical origin of the structure-selectivity is rationalized in terms of both thermodynamics and kinetics. Two fundamental quantities that dictate the selectivity of ethanol oxidation are identified: (i) the ability of surface metal atoms to bond with unsaturated C-containing fragments and (ii) the relative stability of hydroxyl at surface atop sites with respect to other sites.     

Vibrational spectroscopy on platinum single-crystal electrodes: Part I. In-situ infrared spectroscopic studies of the adsorption and oxidation of CO on Pt (111) in sulphuric acid

Platinum single-crystal electrodes of 5 mm diameter were prepared for in situ infrared spectroscopic measurements by melting platinum wires. The linear potential sweep voltammograms of hydrogen adsorption/desorption on Pt (111), (110) and (100) in 0.5 M sulphuric acid are in excellent agreement with those observed on smaller platinum single-crystal surfaces.The adsorption and oxidation of CO on Pt (111) in 0.5 M sulphuric acid was studied by in situ polarization modulated infrared reflection absorption spectroscopy. The effects of the initial adsorption potential and surface reconstruction on the nature and oxidation mechanism of the adsorbed CO layer are reported.     

Competitive paths for methanol decomposition on Pt(111)

Periodic, self-consistent, Density Functional Theory (PW91-GGA) calculations are used to study competitive paths for the decomposition of methanol on Pt(111). Pathways proceeding through initial C-H and C-O bond scission events in methanol are considered, and the results are compared to data for a pathway proceeding through an initial O-H scission event [Greeley et al. J. Am. Chem. Soc. 2002, 124, 7193]. The DFT results suggest that methanol decomposition via CH(2)OH and either formaldehyde or HCOH intermediates is an energetically feasible pathway; O-H scission to CH(3)O, followed by sequential dehydrogenation, may be another realistic route. Microkinetic modeling based on the first-principles results shows that, under realistic reaction conditions, C-H scission in methanol is the initial decomposition step with the highest net rate. The elementary steps of all reaction pathways (with the exception of C-O scission) follow a linear correlation between the transition state and final state energies. Simulated HREELS spectra of the intermediates show good agreement with available experimental data, and HREELS spectra of experimentally elusive reaction intermediates are predicted.     

A reflection absorption infrared spectroscopy and density-functional theory investigation of methanol dehydrogenation on Rh(111)V alloy surfaces

The dehydrogenation reaction of methanol on a Rh(111) surface, a Rh(111)V subsurface alloy, and on a Rh(111)V islands surface has been studied by thermal-desorption spectroscopy, reflection absorption infrared spectroscopy, and density-functional theory calculations. The full monolayer of methanol forms a structure with a special geometry with methanol rows, where two neighboring molecules have different oxygen-rhodium distances. They are close enough to form a H-bonded bilayer structure, with such a configuration, where every second methanol C-O bond is perpendicular to the surface on both Rh(111) and on the Rh(111)V subsurface alloy. The Rh(111)V subsurface alloy is slightly more reactive than the Rh(111) surface which is due to the changes in the electronic structure of the surface leading to slightly different methanol species on the surface. The Rh(111)V islands surface is the most reactive surface which is due to a new reaction mechanism that involves a methanol species stabilized up to about 245 K, partial opening of the methanol C-O bond, and dissociation of the product carbon monoxide. The latter two reactions also lead to a deactivation of the Rh(111)V islands surface.     

A first-principles study of methanol decomposition on Pt(111)

A periodic, self-consistent, Density Functional Theory study of methanol decomposition on Pt(111) is presented. The thermochemistry and activation energy barriers for all the elementary steps, starting with O[bond]H scission and proceeding via sequential hydrogen abstraction from the resulting methoxy intermediate, are presented here. The minimum energy path is represented by a one-dimensional potential energy surface connecting methanol with its final decomposition products, CO and hydrogen gas. It is found that the rate-limiting step for this decomposition pathway is the abstraction of hydroxyl hydrogen from methanol. CO is clearly identified as a strong thermodynamic sink in the reaction pathway while the methoxy, formaldehyde, and formyl intermediates are found to have low barriers to decomposition, leading to very short lifetimes for these intermediates. Stable intermediates and transition states are found to obey gas-phase coordination and bond order rules on the Pt(111) surface.     

Methanol oxidation on a Pt(111)-OH/O surface

The methanol oxidation on a hydroxylated Pt (Pt(111)-OH) surface has been investigated by means of infrared reflection absorption spectroscopy (IRAS) in ultra-high vacuum (UHV) and in acidic solution. The Pt(111)-OH surface in UHV was prepared by introducing water molecules on a Pt(111)-(2 x 2)-O surface and annealed at temperature higher than 160 K. Methanol was then, introduced to the Pt(111)-OH surface to show the dependence of the reaction intermediate on the annealing temperature. At an annealing temperature below 160 K, IR bands assignable to methanol overlayer were observed and no detectable intermediates, such as CO, formaldehyde and formate, were formed, suggesting that methanol molecules remain stable on Pt(111) surface without dissociation at this temperature region. At an annealing temperature above 160 K, on the other hand, CO and formate were observed. In addition, the oxidation of CO on Pt(111)-OH showed no sign of formate formation, indicating that formate is not derived from CO, but from a direct oxidation of methanol. Methanol oxidation was carried out in 0.1 mol dm(-3) HClO(4) solution on Pt(111) with a flow cell configuration and showed the formation of formate. These results indicate that the formate is the dominant non-CO intermediate both in UHV and in acidic solution, and the preadsorbed oxygen-containing species, in particular OH adsorbates, on Pt(111) surface plays a very important role in the formate formation process in methanol oxidation reaction.     

铂催化甲醇氧化开始步骤的研究

用ab initio和密度泛函(DFT)方法研究甲醇在铂低指数晶面的脱氢步骤. 在经典的Bagotzky模型计算的基础上提出了三种新的吸附脱氢模型, 并通过计算证明了三种模型的可行性, 计算证实了原位波谱法检测到的甲醇在铂上脱氢的三种中间体, CHOH, CH₂OH和CH₃O. 得出了甲醇脱氢的根本原因在于形成的强Pt—H键, 且在Pt不同的晶面上, 催化性能及反应历程、中间产物都不同.     

Theoretical Study on the Adsorption and Decomposition of Methanol over the Pt-Mo（111）/C Surface

The density functional theory(DFT) and self-consistent periodic calculation were used to investigate the methanol adsorption on the Pt-Mo(111)/C surface.The adsorption energies,equilibrium geometries and vibration frequencies of CH3OH on nine types of sites on the Pt-Mo(111)/C surface were predicted and the favorite adsorption site for methanol is the top-Pt site.Both sites of valence and conduction bands of doped system have been broadened,which are favorable for electrons to transfer to the cavity.The possible decomposition pathway was investigated with transition state searching and the calculation results indicate that the O-H bond is first broken,and then the methanol decomposes into methoxy.The activation barrier of O-H bond breaking with Pt-Mo catalyst is only 104.8 kJ mol-1,showing that carbon supported Pt-Mo alloys have promoted the decomposition of methanol.Comparing with the adsorption energies of CH3OH on the Pt(111)/C surface and that of CO,the adsorption energies of CO are higher,and Pt(111)/C is liable to be oxidized and loses the activity,which suggests that the catalyst Pt-Mo(111)/C is in favor of decomposing methanol and has better anti-poisoning ability than Pt(111)/C.     

The electrooxidation of small organic molecules on platinum nanoparticles supported on gold: influence of platinum deposition procedure

The electrocatalytic properties of small platinum nanoparticles were investigated for the oxidation of CO, methanol, and formic acid using voltammetry, chronoamperometry, and surface-enhanced Raman spectroscopy. The particles were generated by galvanostatic deposition of platinum on a polished gold surface from an H₂PtCl₆ containing electrolyte and ranged between 10 and 20 nm in diameter for low platinum surface concentrations, 10 and 120 nm for medium concentrations, and full Pt monolayers for high concentrations. CO stripping and bulk CO oxidation experiments on the particles up to 120 nm in diameter displayed pronounced structural effects. The CO oxidation current-time transients show a current decay for low platinum coverages and a current maximum for medium and high coverages. These results were also observed in the literature for particles of 2- to 5-nm size and agglomerates of these particles. The similarities between the literature and our results, despite large differences in particle size and morphology, suggest that particle structure and morphology are also very important catalytic parameters. Surface-enhanced Raman spectroscopy data obtained for the oxidation of CO on the Pt-modified Au electrodes corroborate this conclusion. A difference in the ratio between CO adsorbed in linear- and bridge-bonded positions on the Pt nanoparticles of different sizes demonstrates the influence of the surface morphology. The oxidation activity of methanol was found to decrease with the particle size, while the formic acid oxidation rate increases. Again, a structural effect is observed for particles of up to ca. 120 nm in diameter, which is much larger than the particles for which a particle size effect was reported in the literature. The particle shape effect for the methanol oxidation reaction can be explained by a reduction in available “ensemble sites” and a reduction in the mobility of CO formed by decomposition of methanol. As formic acid does not require Pt ensemble sites, decreasing the particle size, and thus, the relative number of defects, increases the reaction rate. Dedicated to Prof. Dr. Teresa Iwasita on the occasion of her 65th birthday in recognition of her numerous contributions to interfacial electrochemistry.     

Adsorption and decomposition of cyclohexanone (C6H10O) on Pt(111) and the (2 × 2) and (√3 × √3)r30°-Sn/Pt(111) surface alloys

Adsorption and decomposition of cyclohexanone (C(6)H(10)O) on Pt(111) and on two ordered Pt-Sn surface alloys, (2 × 2)-Sn/Pt(111) and (√3 × √3)R30°-Sn/Pt(111), formed by vapor deposition of Sn on the Pt(111) single crystal surface were studied with TPD, HREELS, AES, LEED, and DFT calculations with vibrational analyses. Saturation coverage of C(6)H(10)O was found to be 0.25 ML, independent of the Sn surface concentration. The Pt(111) surface was reactive toward cyclohexanone, with the adsorption in the monolayer being about 70% irreversible. C(6)H(10)O decomposed to yield CO, H(2)O, H(2), and CH(4). Some C-O bond breaking occurred, yielding H(2)O and leaving some carbon on the surface after TPD. HREELS data showed that cyclohexanone decomposition in the monolayer began by 200 K. Intermediates from cyclohexanone decomposition were also relatively unstable on Pt(111), since coadsorbed CO and H were formed below 250 K. Surface Sn allowed for some cyclohexanone to adsorb reversibly. C(6)H(10)O dissociated on the (2 × 2) surface to form CO and H(2)O at low coverages, and methane and H(2) in smaller amounts than on Pt(111). Adsorption of cyclohexanone on (√3 × √3)R30°-Sn/Pt(111) at 90 K was mostly reversible. DFT calculations suggest that C(6)H(10)O adsorbs on Pt(111) in two configurations: by bonding weakly through oxygen to an atop Pt site and more strongly through simultaneously oxygen and carbon of the carbonyl to a bridged Pt-Pt site. In contrast, on alloy surfaces, C(6)H(10)O bonds preferentially to Sn. The presence of Sn, furthermore, is predicted to make the formation of the strongly bound C(6)H(10)O species bonding through O and C, which is a likely decomposition precursor, thermodynamically unfavorable. Alloying with Sn, thus, is shown to moderate adsorptive and reactive activity of Pt(111).     

Adsorbed intermediates of formaldehyde oxidation and their role in the reaction mechanism

Formaldehyde oxidation was studied on the basal planes of platinum single crystals. Electrochemical and IR spectroscopy data give new information on the mechanism of oxidation. Formaldehyde oxidation at platinum electrodes is a surface-sensitive reaction. From the three basal planes of Pt(hkl), Pt(111) is the most active one. The less active surfaces Pt(100) and Pt(110) are blocked by adsorbed carbon monoxide at the initial stages of the reaction as the formaldehyde is admitted in the solution with the electrode polarized at 0.05 V. Besides CO(ad), other adsorbed species are formed. From these, methylene glycolate, H2COO(ad), is the intermediate of the fast oxidation pathways forming CO2 and HCOOH as soluble products. According to IR data the yields of soluble products at Pt(111) were calculated at 0.6 V, giving 63% for HCOOH and 37% for CO2. At 0.05 V the Pt(111) surface becomes slowly blocked by CO(ad), as observed when the electrode was left in contact with the formaldehyde solution over a period of several minutes. The same blockage occurs during a cyclic voltammogram, which causes a lowering of activity during the second potential scan. A general scheme of the reaction is proposed.     

C-O bond scission of methoxide on Pd nanoparticles: a density functional study

C-O bond scission of methoxide species adsorbed at the surface of Pd nanoparticle was studied by DF calculations for the example of cuboctahedral Pd(79). To investigate different locations of adsorbed intermediates as well as the transition state of C-O bond scission, a substrate model was used, which allows one to consider adsorbates without any local geometry restrictions. In contrast to reaction sites on the flat Pd(111) surface and on extended facets, scission of the C-O bond of methoxide at cluster edges is exothermic by approximately 40 kJ mol(-1) and the decomposition product CH(3) is found to be stabilized there. However, the high calculated activation barrier, approximately 140 mol(-1), implies only a very slow reaction compared to dehydrogenation of CH(3)O.     

Reaction mechanism of methanol decomposition on Pt‐based model catalysts: A theoretical study

The decomposition mechanisms of methanol on five different Pt surfaces, the flat surface of Pt(111), Pt‐defect, Pt‐step, Pt(110)(1 × 1), and Pt(110)(2 × 1), have been studied with the DFT‐GGA method using the repeated slab model. The adsorption energies under the most stable configuration of the possible species and the activation energy barriers of the possible elementary reactions involved are obtained in this work. Through systematic calculations for the reaction mechanism of methanol decomposition on these surfaces, we found that such a reaction shows the same reaction mechanism on these Pt‐based model catalysts, that is, the final products are all H (H_ads) and CO (CO_ads) via O? H bond breaking in methanol and C? H bond scission in methoxy. These results are in general agreement with the previous experimental observations. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010.     

甲硫醇、甲醇在金属表面上的分解反应性能比较研究

用键级守恒-Morse势法比较了XH₃SH、CH₃OH在Ni(111)、Pt(111)和Cu(111)面上的热分解反应性能.结果表明,由Ni至Pt再至Cu,CH₃SH中C-S键断裂几率降低,而S-H键裂相对几率增加,而在Cu上仅发生S-H键裂.CH₃OH在Ni上易解离为CH₃和CH₃O-,在Pt、Cu上则较难解离.按Ni、Pt、Cu的顺序,CH₃S-选择性断裂C-S键的几率增加,而CH₃O-则选择性断裂C-H键的几率增加.CH₃XH、CH₃X-(X=O,S)解离活化能垒依Ni、Pt、Cu的顺序增加,CH₃OH在Ni上最终解离为CO,而在Cu上则解离为H₂CO.