Preparation, Thermal Behaviour, and Crystal Structure of MgAl2F8(H2O)2

 Single crystals of MgAl₂F₈(H₂O)₂ have been obtained under hydrothermal conditions (250°C, 14 d) from a starting mixture of AlF₃ and MgAlF₅(H₂O)₂ in a 5% (w/w) HF solution. The crystal structure has been determined and refined from single crystal data (Fmmm (#69), Z = 4, a = 7.2691(7), b = 7.0954(16), c = 12.452(2) ?, 281 structure factors, 27 parameters, R(F ² > 2σ (F ²)) = 0.0282, wR(F ² all) = 0.0885). The obtained crystals were systematically twinned according to (010/100/001) as twinning matrix, reflecting the pseudo-tetragonal metric. The crystal structure is composed of perowskite-type layers built of corner sharing AlF₆ octahedra with an overall composition of AlF₄ ⁻ which are connected via common fluorine atoms of [MgF_4/2(H₂O)_2/1] octahedra. Group-subgroup relations of MgAl₂F₈(H₂O)₂ to WO₃(H₂O)_0.33 and to other M(II)M(III)₂ F₈(H₂O)₂ structures are briefly discussed. Above 570°C, MgAl₂F₈(H₂O)₂ decomposes under elimination of water into α-AlF₃, β-AlF₃, and MgF₂.     

The Thermal Dehydration of Magnesium Aluminum Pentafluoride Dihydrate: Crystal Structures of MgAlF5(H2O)2 and MgAlF5

Summary.  Small plate-like single crystals of MgAlF₅(H₂O)₂ have been obtained during hydrothermal treatment (270°C) of microcrystalline material prepared by precipitation of stoichiometric solutions of Al₂(SO₄)₃ ·  18H₂O and Mg(NO₃)₂ · 6H₂O with diluted hydrofluoric acid. The crystal structure of MgAlF₅(H₂O)₂ has been refined from single crystal data (Imma (# 74), Z = 4, a = 7.0637(7), b = 10.1308(10), c = 6.7745(7) ?, 398 structure factors, 33 parameters, R(F² > σ(F ²)) = 0.0245, wR(F² all) = 0.0525). Main features of the inverse weberite type structure are infinite chains of trans-bridged [AlF₆] octahedra which are connected via common fluorine atoms by isolated [MgF₄(H₂O)₂] octahedra. MgAlF₅(H₂O)₂ dehydrates at temperatures above 300°C to give MgAlF₅. XRPD analysis of this phase has revealed isotypism with FeAlF₅. The crystal structure of MgAlF₅ (Immm (# 71), Z = 2, a = 7.268(1), b = 6.123(2), c = 3.543(1) ?) is built of infinite chains of edge-sharing [MgF₆] octahedra and chains of corner-sharing [AlF₆] octahedra along [001]. Upon further heating to temperatures above 500°C, MgAlF₅ decomposes to MgF₂ and α − AlF₃. Received January 15, 2001. Accepted February 12, 2001     

The Thermal Dehydration of Magnesium Aluminum Pentafluoride Dihydrate: Crystal Structures of MgAlF5(H2O)2 and MgAlF5

 Small plate-like single crystals of MgAlF₅(H₂O)₂ have been obtained during hydrothermal treatment (270°C) of microcrystalline material prepared by precipitation of stoichiometric solutions of Al₂(SO₄)₃ ·  18H₂O and Mg(NO₃)₂ · 6H₂O with diluted hydrofluoric acid. The crystal structure of MgAlF₅(H₂O)₂ has been refined from single crystal data (Imma (# 74), Z = 4, a = 7.0637(7), b = 10.1308(10), c = 6.7745(7) ?, 398 structure factors, 33 parameters, R(F² > σ(F ²)) = 0.0245, wR(F² all) = 0.0525). Main features of the inverse weberite type structure are infinite chains of trans-bridged [AlF₆] octahedra which are connected via common fluorine atoms by isolated [MgF₄(H₂O)₂] octahedra. MgAlF₅(H₂O)₂ dehydrates at temperatures above 300°C to give MgAlF₅. XRPD analysis of this phase has revealed isotypism with FeAlF₅. The crystal structure of MgAlF₅ (Immm (# 71), Z = 2, a = 7.268(1), b = 6.123(2), c = 3.543(1) ?) is built of infinite chains of edge-sharing [MgF₆] octahedra and chains of corner-sharing [AlF₆] octahedra along [001]. Upon further heating to temperatures above 500°C, MgAlF₅ decomposes to MgF₂ and α − AlF₃.     

Two Novel Er-Cr Ion-Pair Complexeswith Hydrogen Bonding Network: Syntheses, Crystal Structures, and Magnetic Properties

Summary.  Two novel Er-Cr ion-pair complexes ([Er(DMA)₃(H₂O)₄][Cr(CN)₆] and [Er(MPL)₄(H₂O)₃][Cr(CN)₆]·2H₂O; DMA = dimethylacetamide, MPL = 1-methyl-2-pyrrolidinone) have been synthesized. [Er(DMA)₃(H₂O)₄][Cr(CN)₆] crystallizes in the monoclinic system (space group P _c ) with a = 9.789(2), b = 11.263(2), c = 13.997(3)?, β = 105.66(3)°, V = 1485.9(5)?³, Z = 2; [Er(MPL)₄(H₂O)₃][Cr(CN)₆]·2H₂O crystallizes in the monoclinic system (space group P2₁) with a = 9.447(2), b = 13.881(3), c = 14.673(3)?, β = 101.85(3), V = 1883.1(7)?³, Z = 2. X-Ray crystal diffraction analyses reveal that the two complexes form a hydrogen bonding network structure through the CN group and H₂O molecules. Variable temperature susceptibilities for the two complexes indicate that weak antiferromagnetic interactions exist between cation and anion pairs through this hydrogen bonding network.     

Preparation,Thermal Behaviour,and Crystal Structure of MgAl<Subscript>2</Subscript>F<Subscript>8</Subscript>(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>

Summary.  Single crystals of MgAl₂F₈(H₂O)₂ have been obtained under hydrothermal conditions (250°C, 14 d) from a starting mixture of AlF₃ and MgAlF₅(H₂O)₂ in a 5% (w/w) HF solution. The crystal structure has been determined and refined from single crystal data (Fmmm (#69), Z = 4, a = 7.2691(7), b = 7.0954(16), c = 12.452(2) ?, 281 structure factors, 27 parameters, R(F ² > 2σ (F ²)) = 0.0282, wR(F ² all) = 0.0885). The obtained crystals were systematically twinned according to (010/100/001) as twinning matrix, reflecting the pseudo-tetragonal metric. The crystal structure is composed of perowskite-type layers built of corner sharing AlF₆ octahedra with an overall composition of AlF₄ ⁻ which are connected via common fluorine atoms of [MgF_4/2(H₂O)_2/1] octahedra. Group-subgroup relations of MgAl₂F₈(H₂O)₂ to WO₃(H₂O)_0.33 and to other M(II)M(III)₂ F₈(H₂O)₂ structures are briefly discussed. Above 570°C, MgAl₂F₈(H₂O)₂ decomposes under elimination of water into α-AlF₃, β-AlF₃, and MgF₂. Received October 29, 2001. Accepted (revised) December 6, 2001     

Crystal Structures of Na3PO2S2 · 11H2O and Na3POS3 · 11H2O

Summary.  Single crystals of sodium dithiophosphate undecahydrate (Na₃PO₂S₂ · 11H₂O) and sodium trithiophosphate undecahydrate (Na₃POS₃ · 11H₂O) were grown from aqueous solution. The crystal structures of Na₃PO₂S₂ · 11H₂O (P2₁2₁2₁; a = 1248.1(1), b = 945.2(1), c = 1383.1(1) pm; R ₁ = 0.0202, wR ₂ = 0.0502) and Na₃POS₃ · 11H₂O (Pna2₁; a = 1262.0(2), b = 947.6(2), c = 1431.5(2) pm; R ₁ = 0.0720, wR ₂ = 0.1371) are related to each other in a sense that all constituting units are arranged in similar positions and with similar orientations. The geometries of the anions were determined with high accuracy; thus, the structural parameters of the POS³⁻ ₃ anion were measured for the first time. Received September 25, 2001. Accepted January 21, 2002     

Analysis of photocurrent spectra at polybithienyl film coated on Pt

Photoelectrochemical measurements have been performed at a polybithienyl (PBT) film (doping level of 1 × 10¹⁸/cm³) deposited on a platinum electrode. The cathodic photocurrents and negative slope of the Mott-Schottky plot indicate that the PBT film has the features of a p-type semiconductor. The cathodic photocurrents are interpreted in terms of the Gaertner-Butler model on the basis of the theory of the semiconductor|solution interface. The (i _ph hν)^2/n vs. hν plots taken from the photocurrent spectra show two linearities for n=1 in the wavelength range from 460 nm to 490 nm and for n=4 in the wavelength range λ > 490 nm. The band gaps of the PBT film were determined to be 2.05 ± 0.05 eV for n=1 and 1.55 ± 0.05 eV for n=4. The flat-band potential is 0.33 V (vs SCE). From the slope of the Mott-Schottky plot at the modulation frequency of 3 kHz, the dielectric constant ɛ of the film and the thickness of the depletion layer W ₀ of the PBT film were determined to be 7.4 and 0.29 μm, respectively. Received: 6 January 1999 / Accepted: 6 June 1999     

Thermochemistry of Microhydration of Sodiated and Potassiated Monosaccharides

The thermochemical properties ΔH ^o _n , ΔS ^o _n , and ΔG ^o _n for the hydration of sodiated and potassiated monosaccharides (Ara = arabinose, Xyl = xylose, Rib = ribose, Glc = glucose, and Gal = galactose) have been experimentally studied in the gas phase at 10 mbar by equilibria measurements using an electrospray high-pressure mass spectrometer equipped with a pulsed ion beam reaction chamber. The hydration enthalpies for sodiated complexes were found to be between −46.4 and −57.7 kJ/mol for the first, and −42.7 and −52.3 kJ/mol for the second water molecule. For potassiated complexes, the water binding enthalpies were similar for all studied systems and varied between −48.5 and −52.7 kJ/mol. The thermochemical values for each system correspond to a mixture of the α and β anomeric forms of monosaccharide structures involved in their cationized complexes.     

Synthesis,Crystal Structure and Raman Spectrum of Hydrazinium(+2) Fluoroarsenate(III) Fluoride,N<Subscript>2</Subscript>H<Subscript>6</Subscript>AsF<Subscript>4</Subscript>F

Summary.  Hydrazinium(+2) fluoroarsenate(III) fluoride was prepared by the reaction of hydrazinium(+2) fluoride and liquid arsenic trifluoride. N₂H₆AsF₄F is stable at 273 K, but decomposes slowly at room temperature. N₂H₆AsF₄F crystallizes in the orthorhombic space group Pnn2 with a = 774.0(2) pm, b = 1629.2(4) pm and c = 436.6(1) pm; V = 0.5506(3) nm³, Z = 4 and d _c  = 2.461 g cm⁻³. The structure consists of N₂H₆ ²⁺ cations, AsF₄ ⁻ anions, and F⁻ anions and is interconnected by a hydrogen bonding network. Distorted trigonal-bipyramidal AsF₄ ⁻ units are very weakly interconnected and form chains along the b axis. Bands in the Raman spectrum are assigned to the vibrations of N₂H₆ ⁺² cations and AsF₄ ⁻ anions. Corresponding author. E-mail: adolf.jesih@ijs.si Received April 18, 2002; accepted July 15, 2002     

Topological structures of tetrahedral (Td and T) fullerenes with hexagonal and triangular faces and their vibration and NMR spectra

On analyzing the topological structures of the three types of tetrahedral fullerenes (which consist only of triangles and hexagons), (1) C _n (T _d ,n=12h ²; h=1,2,…), (2) C _n (T _d ,n=4h ²;h=1,2,…), and (3) C _n (T,n=4(h ²+hk+k ²);h>k,h,k=1,2,…), we have obtained theoretically the Infrared and Raman active modes by means of the derived formulas for the decomposition of their nuclear motions into irreducible representations, and the ¹³C NMR spectra with natural abundance for ¹³C by using the distribution functions for all of the tetrahedral (T _d and T) fullerenes, respectively. Received: 25 May 1998 / Accepted: 30 July 1998 / Published online: 23 November 1998     

Cage Structure Formation of Singly Doped Aluminum Cluster Cations Al<Subscript><Emphasis Type="BoldItalic">n</Emphasis></Subscript><Emphasis Type="BoldItalic">TM</Emphasis><Superscript>+</Superscript> (<Emphasis Type="BoldItalic">TM</Emphasis> = Ti,V, Cr)

Structural information on free transition metal doped aluminum clusters, Al _n TM ⁺ (TM = Ti, V, Cr), was obtained by studying their ability for argon physisorption. Systematic size (n = 5 – 35) and temperature (T = 145 – 300 K) dependent investigations reveal that bare Al _n ⁺ clusters are inert toward argon, while Al _n TM ⁺ clusters attach one argon atom up to a critical cluster size. This size is interpreted as the geometrical transition from surface-located dopant atoms to endohedrally doped aluminum clusters with the transition metal atom residing in an aluminum cage. The critical size, n _crit , is found to be surprisingly large, namely n _crit = 16 and n _crit = 19 – 21 for TM = V, Cr, and TM = Ti, respectively. Experimental cluster–argon bond dissociation energies have been derived as function of cluster size from equilibrium mass spectra and are in the 0.1–0.3 eV range.     

Kinetic Determination of Iodide Based on its Effect on the Hydrogen Peroxide Oxidation of Triflupromazine

Summary.  A new selective, sensitive, and simple kinetic method is developed for the determination of trace amounts of iodide. The method is based on the catalytic effect of iodide on the reaction of triflupromazine (TFP) with H₂O₂. The reaction is followed spectrophotometrically by tracing the oxidation product at 498 nm within 1 min after addition of H₂O₂. The optimum reaction conditions are TFP (0.4 × 10⁻³ M), H₂SO₄ (1.0M), H₃PO₄ (2.0M), and H₂O₂ (1.6M) at 30°C. Following this procedure, iodide can be determined with a linear calibration graph up to 4.5 ng ċ cm⁻³ and a detection limit of 0.04 ng ċ cm⁻³, based on the 3 S_b criterion. The method can also be applied to the determination of iodate and periodate ions. Determination of as little as 0.2, 1.0, 2.0, and 4.0 ng ċ cm⁻³ of I⁻, IO₃ ^-, or IO₄ ^- in aqueous solutions gave an average recovery of 98% with relative standard deviations below 1.6% (n = 5). The method was applied to the determination of iodide in Nile river water and ground waters as well as in various food samples after alkaline ashing treatment. The method is compared with other catalytic spectrophotometric procedures for iodide determination. Received January 19, 2001. Accepted (revised) March 12, 2001     

Structural, Spectroscopic, and Thermal Behaviour of Bis -(thiosaccharinate)-aqua-cadmium(II)

 The crystal structure of the title complex, [Cd(tsac)₂(H₂O)], has been determined by single crystal X-ray diffraction methods. It crystallizes in the monoclinic space group C2/c (a = 12.236(3), b = 8.919(3), c = 16.655(3) ?, β = 96.18(2)°, Z = 4). The molecular structure was solved from 1705 independent reflections with I > σ(I) and refined to R ₁ = 0.0489. Infrared and Raman spectra of the complex were recorded and are briefly discussed. Its thermal behaviour was investigated by thermogravimetry and differential thermal analysis.     

Modeling of Protonation Constants of Linear Aliphatic Dicarboxylates Containing -S-Groups in Aqueous Chloride Salt Solutions,at Different Ionic Strengths,Using the SIT and Pitzer Equations and Empirical Relationships

The protonation constants of ethylenedithiodiacetic, dithiodipropionic and dithiodibutyric acids were obtained from potentiometric measurements in NaCl(aq) (I≤5 mol⋅L⁻¹) and (CH₃)₄NCl(aq) (I≤3 mol⋅L⁻¹) at t=25 °C. Their dependences on ionic strength were modeled by the SIT and Pitzer approaches. The activity coefficients of the neutral species were obtained by solubility measurements. The literature values of the protonation constants of (HOOC)-(CH₂) _n -S-(CH₂) _n -(COOH) (n=1 to 3) and (HOOC)-(CH₂)-S-(CH₂) _n -S-(CH₂)-(COOH) (n=0 to 5) in NaCl(aq) and KCl(aq) (I≤3 mol⋅L⁻¹) at 18 °C were also analyzed using the above approaches. Both the log ₁₀ K _i ^H and interaction parameter values follow simple linear trends as a function of certain structural characteristics of the ligands. Examples of modeling these trends are reported. Electronic Supplementary Material The online version of this article () contains supplementary material, which is available to authorized users.     

Small-angle neutron-scattering study of bis(quaternaryammonium bromide) surfactant micelles in water. Effect of the long spacer chain on micellar structure

The microstructure of the normal micelles formed by dimeric surfactants with long spacers, [Br⁻(CH₃)₂N⁺(C _m H_{2 m +1})-(CH₂) _S  -(C _m H_{2 m +1})N⁺(CH₃)₂Br⁻, m = 10 and s = 8, 10 and 12], has been investigated by small-angle neutron scattering and compared with previously reported results for micelles of the same dimeric surfactants with shorter spacers (m = 10 and s = 2, 3, 4 and 6). It was found that for dimeric surfactants with long spacers (s = 8 and 10), both micellar growth and variation in shape occur to only a small extent, if at all, compared with dimeric surfactants with short spacers. However, for the dimeric surfactant with the longest spacer, s = 12, the extent of micellar growth and shape variation is also large. These results are due to the differences in conformation of dimeric surfactants with short spacers (s = 2–6) compared with that of the surfactants with long spacers (s = 8–12). Received: 15 June 1998 Accepted: 22 July 1998     

Structural, Spectroscopic, and Thermal Behaviour of Bis-(thiosaccharinate)-aqua-cadmium(II)

Summary.  The crystal structure of the title complex, [Cd(tsac)₂(H₂O)], has been determined by single crystal X-ray diffraction methods. It crystallizes in the monoclinic space group C2/c (a = 12.236(3), b = 8.919(3), c = 16.655(3) ?, β = 96.18(2)°, Z = 4). The molecular structure was solved from 1705 independent reflections with I > σ(I) and refined to R ₁ = 0.0489. Infrared and Raman spectra of the complex were recorded and are briefly discussed. Its thermal behaviour was investigated by thermogravimetry and differential thermal analysis. Received December 18, 2000. Accepted February 19, 2001     

tris-(Benzimidazol-2-yl-methyl)-amine as a Versatile Building Block in Ru(II) Polypyridyl Chemistry

Summary.  tris-(Benzimidazol-2-yl-methyl)-amine, H₃ ntb, was prepared and used in the synthesis of dinuclear Ru(II) polypyridyl and polynuclear Ru(II)–Co(III) complexes of the type [Ru₂(H₂ ntb) (bpy)₄]³⁺, [Ru₂(Hntb)(phen)₄]²⁺, [(Ru₂(H₂ ntb)(bpy)₄)₂Co(en)₂]⁹⁺, and [(Ru₂(Hntb)(phen)₄)₂ Co(en)₂]⁷⁺ (bpy = 2,2′-bipyridine, phen = 1,10-phenanthroline, en = 1,2-diaminoethane). The complexes were characterized by elemental analysis as well as spectroscopic and redox data. The luminescent properties of the complexes were also studied. The complexes showed significant antitumour and anti-HIV activities. Received May 9, 2001. Accepted (revised) June 7, 2001     

Structure and stability of hypervalent NLi n Na2 (n = 1–4) and related species at density functional theory level

A number of configurations of NLi _n Na₂ (n = 1–4) species were optimized using the B3LYP–density functional theory method; the 6-31G^* basis set was used in this calculation. In order to study all possible dissociation energies, some related species such as NLi₂Na, NLi _n (n = 1–4), Li _n (n = 1, 2) and Na _n (n = 1, 2) were also considered. Optimizations of these species were followed by fundamental frequency calculations at the same level. Global minima of these species were shown to adopt C _{2 v} (NLi₄Na₂, NLi₂Na₂), D _{3 h} (NLi₃Na₂) and C _s (NLiNa₂ and NLi₂Na) configurations. All possible dissociation energies were obtained. Received: 30 November 1998 / Accepted: 15 October 1999 / Published online: 14 March 2000     

Oxygen reduction on a Ru x S y (CO) n cluster electrocatalyst in 0.5 M H2SO4

A ruthenium-sulfur carbonyl cluster electrocatalyst, Ru _x S _y (CO) _n , was synthesized by pyrolysis of Ru₃(CO)₁₂ and elemental sulfur in a sealed ampoule at 300 °C. The pyrolyzed compound was characterized by DSC, FT-IR, XRD and SEM (EDX) techniques. The electrocatalytic activity and kinetic parameters for the molecular oxygen reduction were determined by a rotating ring-disk electrode (RRDE) in a 0.5 M H₂SO₄ solution at 25 °C. The cathodic polarization indicates two Tafel slopes: −0.124 ± 0.002 V dec⁻¹ at low and −0.254 ± 0.003 V dec⁻¹ at high overpotentials, and first-order kinetics with respect to O₂ concentration. From the analysis of Levich plots and RRDE results, the oxygen reduction on Ru _x S _y (CO) _n was determined to proceed mostly via a multielectron transfer path (4e⁻) to water formation ( >94%). Received: 4 March 1999 / Accepted: 26 May 1999     

Kinetic Determination of Iodide Based on its Effect on the Hydrogen Peroxide Oxidation of Triflupromazine

 A new selective, sensitive, and simple kinetic method is developed for the determination of trace amounts of iodide. The method is based on the catalytic effect of iodide on the reaction of triflupromazine (TFP) with H₂O₂. The reaction is followed spectrophotometrically by tracing the oxidation product at 498 nm within 1 min after addition of H₂O₂. The optimum reaction conditions are TFP (0.4 × 10⁻³ M), H₂SO₄ (1.0M), H₃PO₄ (2.0M), and H₂O₂ (1.6M) at 30°C. Following this procedure, iodide can be determined with a linear calibration graph up to 4.5 ng ċ cm⁻³ and a detection limit of 0.04 ng ċ cm⁻³, based on the 3 S_b criterion. The method can also be applied to the determination of iodate and periodate ions. Determination of as little as 0.2, 1.0, 2.0, and 4.0 ng ċ cm⁻³ of I⁻, IO₃ ^-, or IO₄ ^- in aqueous solutions gave an average recovery of 98% with relative standard deviations below 1.6% (n = 5). The method was applied to the determination of iodide in Nile river water and ground waters as well as in various food samples after alkaline ashing treatment. The method is compared with other catalytic spectrophotometric procedures for iodide determination.