Competitive anion transport in desalting of mixtures of organic acids by batch electrodialysis

Desalting and separation of binary and quaternary acid mixtures via batch electrodialysis are investigated in this article. A monoselective cation exchange membrane and either a non-selective or a monoselective anion exchange membrane are employed in the electrodialysis stack. The effects of current density and composition of the initial feed of the electrodialysis stack (employing a non-selective anion exchange membrane) on its performance are studied in experiments involving mixtures of acetic and succinic acids. The effect of the type of the anion exchange membrane on the process performance is examined in desalting experiments involving a mixture of acetic, formic, lactic, and succinic acids. The trends observed in the experiments are interpreted in terms of species-specific parameters (such as molar concentration, charge on ionic species, molecular weight, degree of ionization, and ionic equivalent conductivity) and characteristics of anion exchange membrane used.     

Protic cationic oligomeric ionic liquids of the urethane type

Protic oligomeric cationic ionic liquids of the oligo(ether urethane) type are synthesized via the reaction of an isocyanate prepolymer based on oligo(oxy ethylene)glycol with M = 1000 with hexamethylene-diisocyanate followed by blocking of the terminal isocyanate groups with the use of amine derivatives of imidazole, pyridine, and 3-methylpyridine and neutralization of heterocycles with ethanesulfonic acid and p-toluenesulfonic acid. The structures and properties of the synthesized oligomeric ionic liquids substantially depend on the structures of the ionic groups. They are amorphous at room temperature, but ethanesulfonate imidazolium and pyridinium oligomeric ionic liquids form a low melting crystalline phase. The proton conductivities of the oligomeric ionic liquids are determined by the type of cation in the temperature range 80–120°C under anhydrous conditions and vary within five orders of magnitude. The resulting compounds are thermally stable up to 200–270°C.     

Proton transport properties in an ionic liquid having a hydroxyl group

An ionic liquid having a hydroxyl group, choline bis(trifluoromethylsulfonyl)amide ([N(111(2OH))][N(Tf)(2)]), was synthesized to investigate the effect of hydroxyl groups on the proton transport. 1,1,1-Trifluoro-N-(trifluoromethylsulfonyl)methanesulfoneamide (HN(Tf)(2)) as a proton source was mixed with the choline derivative at various molar ratios. Their thermal properties, viscosities, and ionic conductivities were investigated. [N(111(2OH))][N(Tf)(2)] showed a melting point at 27 °C, and its thermal stability was higher than 400 °C. The viscosity of [N(111(2OH))][N(Tf)(2)]/HN(Tf)(2) mixtures increased as the acid molar fraction increased. The ionic conductivity of [N(111(2OH))][N(Tf)(2)] was 2.1 × 10(-3) S cm(-1) at 25 °C; the ionic conductivity monotonously decreased as the acid molar fraction increased. There was a clear correlation between the ionic conductivity and the viscosity for the mixtures of the choline derivative and the acid. PFG-NMR measurements were carried out to investigate the diffusion behavior of protons. Although the acid and the hydroxyl group were indistinguishable by (1)H NMR, the self-diffusion coefficient of the (1)H of the hydroxyl group and the acid was larger than those of other (1)H nuclei. This difference suggests that a fast intermolecular proton transfer exists between the hydroxyl group and the acid.     

二元混合离子液体的电导率与离子间的缔合作用

在293.15-323.15 K范围内, 测定了13种常见离子液体及其25组混合体系的电导率. 利用Vogel-Tammann-Fulcher (VTF)方程对电导率数据进行拟合, 并通过方程式中的拟合参数分析了离子液体混合后其阴阳离子间缔合作用的变化规律. 结果表明,在相同温度下, 离子液体的阳离子侧链越短,阴离子电荷越分散, 阴阳离子间的氢键作用力越弱,离子液体的电导率越大, 其中阴离子的影响比阳离子更明显.混合离子液体中离子间的缔合作用不仅与阴阳离子的种类有关,而且与混合物的组成有关.     

Raman spectroscopy of the mixtures (x)1-butyl-1-methylpyrrolidinium chloride-(1 - x)TaCl5 in solid and molten states

A series of novel ionic liquids consisting of 1-butyl-1-methylpyrrolidinium chloride (Pyr14Cl) and TaCl5 were obtained in a wide range of molar compositions for electrochemical application. Raman spectroscopy was used to investigate the complex formation of tantalum(V) in the mixtures of (x)Pyr14Cl-(1 - x)TaCl5 (x = 0.80-0.30) over the temperature range 20-160 degrees C. Depending on the molar composition, different species of tantalum (V) were identified. In the basic and neutral mixtures of (x)Pyr14Cl-(1 - x)TaCl5 (x = 0.80-0.50), tantalum(V) exists in the form of octahedral [TaCl6](-) in both solid and molten states. In acidic ionic liquids (x = 0.45-0.30), [Ta2Cl10] units are the main species of tantalum(V) identified in the solid state. As the temperature rose, the gradual degradation of [Ta2Cl10] units was observed in the solid state, accompanied by the formation of [TaCl6](-) and [Ta2Cl11](-) anions. In the molten state, in the range between 130 and 160 degrees C, the latter two species exist in equilibrium and are the dominant species of tantalum(V). The formation of oxochloride species of tantalum(V) was investigated in mixtures of Pyr14Cl-TaCl5-Na2O (x = 0.65) at various O/Ta mole ratios, and the formation of the oligomeric species with Ta-O-Ta bridging bonds was determined.     

Solvents effects in the photodegradation and reactivity of the various ionic forms of haematoporphyrin

The dependence of the ionic forms of haematoporphyrin(LX) dihydrochloride (HpdiCl) on solvent composition was investigated. In 2.8 x 10(-4) M solutions of HpdiCl in apolar (C6H6) and polar (CH3CN) solvents, HpdiCl exists in dicationic form. In hydrogen-bonding solvents, such as CH3OH, HpdiCl can exist in neutral, monocationic and dicationic forms. In C6H6-CH3OH solvent mixtures, the ionic forms in which HpdiCl is present depend on the composition of the solvent and on the acidity of the solution. The rate of oxidative photodegradation of HpdiCl excitation in its Q bands (WBI) and the ability to produce free radicals are different for the different ionic species. The highest values correspond to the dicationic form of HpdiCl and the lowest values correspond to the neutral species. In the absence of oxygen, the formation of free radicals due to the reaction of 3(Hp dication) is detected in the following solvent mixtures: CH3OH-toluene, CH3OH-ethylbenzene, CH3OH-hexane. The data obtained indicate that interaction of 3(Hp dication) with methine groups is an intermediate step in the formation of free radicals. In the HpdiCl concentration range studied, the presence of a phenolic antioxidant, such as beta-naphtol, inhibits the oxidative photodegradation of the dicationic form in a treated solution, but has little effect on the oxidative photobleaching of the monocation. The rate of oxidative photodegradation of the monocationic form increases with the addition of propionic acid to the solution.     

Hydrogen bonds in protic ionic liquids and their correlation with physicochemical properties

The temperature dependence of the N-H proton chemical shift in protic ionic liquids (PILs) and FT-IR spectra of the N-H bonds indicated the presence of strong hydrogen bonds between the protonated cation and the anion, depending on the ΔpK(a) of the constituent acid and base, and their successive breaking with temperature, which may explain the characteristic properties of PILs such as relatively low ionicity and its decrease with temperature.     

Ionic liquid analogues formed from hydrated metal salts

A dark green, viscous liquid can be formed by mixing choline chloride with chromium(III) chloride hexahydrate and the physical properties are characteristic of an ionic liquid. The eutectic composition is found to be 1:2 choline chloride/chromium chloride. The viscosity and conductivity are measured as a function of temperature and composition and explained in terms of the ion size and liquid void volume. The electrochemical response of the ionic liquid is also characterised and it is shown that chromium can be electrodeposited efficiently to yield a crack-free deposit. This approach could circumvent the use of chromic acid for chromium electroplating, which would be a major environmental benefit. This method of using hydrated metal salts to form ionic liquids is shown to be valid for a variety of other salt mixtures with choline chloride.     

Open mechanistic problems of quasiliving carbocationic polymerization of olefins mediated by nucleophilic additives

This study is a comprehensive overview of the open problems and the existing views on the mechanism of quasiliving carbocationic polymerizations (QLCP) of olefins mediated by nucleophilic additives. The fundamental and general aspects of ideal living and quasiliving polymerizations involving other mechanisms, such as free radical, group transfer, ring-opening metathesis, ring-opening cationic and anionic processes, have been also analyzed and summarized. Quasiliving carbocationic polymerization of olefins in the presence of nucleophiles, which form complexes with the Lewis acid coinitiators, occur By reversible termination. Four different mechanisms have been discussed in this study: (1) reactivity leveling by nucleophiles (“electron donors”); (2) propagation by species with decreased ionicity (“stretched polarized bonds”) mediated by Lewis acid-nucleophile complexes (LA-Nu); (3) propagation by classical ion pair and free ion species; (4) proton scavenging by nucleophiles and 2,6-di-teri-butylpyridine proton trap. It is shown that mechanisms No. 1, 3 and 4 cannot explain all the existing findings, and although the experimental results can be interpreted with mechanism No. 2, the existence of “stretched polarized bonds” can be questionable. It is also concluded that compared to nonliving carbocationic polymerization, kinetic analysis indicates that the propagating species cannot be the same in quasiliving carbocationic polymerizations and in chain transfer dominated classical carbocationic polymerizations with ion pairs and free ions.     

Effect of interactions between the adsorbed species on the properties of single and mixed-surfactant monolayers at the air/water interface

Experimental data on surface tension available from the literature and generated in the present study are analyzed to estimate the applicability of adsorption models, based on the Frumkin equation, to nonionic and ionic surfactants and their mixtures. Optimization programs based on the least-squares method in media of Delphi V and Pascal VII are used. The effect of interactions between the adsorbed species on surface tension is considered in all cases. The results are compared to those obtained with the simpler Szyszkowski equation, employed in numerous studies of nonionic surfactants, when interactions are neglected. Cases where the Frumkin model can be successfully employed with ionic surfactants and mixtures are presented and the conditions of its applicability are analyzed. Related characteristic quantities (maximum adsorption, standard free energy of surfactant adsorption, energy of interaction between adsorbed species, standard free energy of counterion adsorption, degree of coverage by surfactant/counterion associates) are established as a function of: The properties of an adsorption layer from a mixture of nonionic and ionic surface-active species are compared to those of the single surfactants.     

Synthesis and characterization of partially disulfonated hydroquinone‐based poly(arylene ether sulfone)s random copolymers for application as proton exchange membranes

Partially disulfonated hydroquinone (HQ)‐based poly(arylene ether sulfone) random copolymers were synthesized and characterized for application as proton exchange membranes. The copolymer composition was varied in the degree of disulfonation. The copolymers were characterized by ¹H NMR, Differential Scanning Calorimetry (DSC), and other analytical techniques. The copolymer with a 25% degree of disulfonation showed the best balance between water uptake and proton conductivity. The copolymers showed substantially reduced methanol permeability compared with Nafion® and satisfactory direct methanol fuel cell performance. The methanol selectivity improved significantly in comparison to Nafion® 117. At a given ionic composition, the HQ‐based system showed higher water uptake and proton conductivity than the biphenol‐based (BPSH‐xx) poly(arylene ether sulfone)s copolymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 384–391, 2009     

Resolution of a nonionic surfactant oligomeric mixture by means of DOSY with inverse micelle assistance

DOSY is a recognized, efficient technique in the analysis of mixtures. It relies on the differences in self-diffusion coefficients, which are determined by the molecular size. Nowadays, efforts are directed towards devising matrices able to interact with the components of the mixture with differential affinity, and therefore capable to interfere with the diffusion processes and to display resolving power towards species of close, or even equal molecular weight, like isomers. Usually, commercial nonionic surfactants are mixtures of oligomeric species, since the head group, which is a short polyoxyehtylene chain, is somewhat polydisperse. The embedment of Igepal CA-520, 5 polyoxyethylene iso-octylphenyl ether, in an inverse microemulsion led to the separation of (1)H signals of the various oligomeric components. This ensued from the differential partitioning between the oil and the surface of the inverse micelles, which depends on the ethyleneoxide number (EON) of the head groups. Thus, it was possible to ascertain that the length distribution of the polyethyleneoxide chains is ingood agreement with the Poisson distribution theoretically predicted for the polymerization of ethylene oxide. The DOSY spectrum contributed to the assignment of the signals and afforded the partition degree, between the two environments, for each individual oligomeric species, providing further insight into nonionic inverse microemulsions, at present widely employed reaction media in the nanotechnological syntheses.     

COMPLEXES OF Al(III) WITH HYDROXYAROMATIC LIGANDS

Abstract

In order to assess the aluminium binding ability of humic and fulvic acids, important organic soil constituents, a pH-potentiometric study was made of the proton and aluminium(III) complexes of various bi-, tri- and tetradentate catechol and salicylic acid derivatives at 25°C and at an ionic strength of 0.20moldm^?3 (KC1). The stability data revealed that at low pH the salicylate function, and at high pH the catecholate function, is preferentially bound to the aluminium ion. In the intermediate pH range, mixed hydroxo complexes and other di/oligomeric species are also formed. With an increase of the number of available coordinating sites in the molecule, the tendency to oligomeric complex formation increases, while the tendency to metal ion hydrolysis decreases.     

Internal mobilities and diffusion in an ionic liquid mixture

The internal mobility gives the rate at which one ionic species moves relative to the other species present in an ionic mixture, it mirrors the differential strength of the interactions between different ionic species. In this work we examine the dependence of the internal mobilities of the Li(+) and K(+) ions on the composition in molten mixtures of LiF and KF. We compare them to the behaviour of the individual diffusion coefficients and the self-exchange velocities, which measure the rate at which an ion separates from its nearest-neighbour coordination shell. The examination is made using molecular dynamics simulations with polarizable, first-principles parameterised interaction potentials which are shown to reproduce the limited available experimental data on the transport properties of these mixtures extremely well. The results confirm that the composition-dependence of the internal mobilities in LiF/KF follows the unusual type-II behaviour, which is not reflected in that of the diffusion coefficients or the self-exchange velocities.     

Reactive Oligomeric Protic Cationic Linear Ionic Liquids with Different Types of Nitrogen Centers

Reactive linear oligo(ethylene oxides) containing terminal secondary hydroxyl groups and secondary amino groups combined with nitrogen heterocyclic fragments are synthesized by the reaction of oligo(oxyethylene glycol) α,ω-diglycidyl ether (М = 1.0 × 10³) with 1-(3-aminopropyl)imidazole, 2-aminopyridine, or 2-amino-3-methylpyridine. Protonation of the synthesized compounds by ethanesulfonic acid and p-toluenesulfonic acid at their different ratios is studied. This process makes it possible to obtain oligomeric linear protic cationic ionic liquids capable of condensation. The proton conductivity of oligomeric ionic liquids is investigated under anhydrous conditions in the temperature range of 40–120°С. The highest conductivity (1.36 × 10^–3 S/cm) is attained in the case of methylpyridinium ethanesulfonate oligomeric ionic liquid at 120°С. These compounds are thermally stable to a temperature of 250–290°С. They show promise for the synthesis of polymeric analogs of block ionic liquids suitable in the production of electrochemical devices for various purposes.     

Photoreduction of 4,4'-bipyridine by amines in acetonitrile-water mixtures: influence of H-bonding on the ion-pair structure and dynamics

The photoreduction of 4,4'-bipyridine (44BPY) by diazabicyclo[2.2.2]octane and triethylamine (TEA) is investigated by using picosecond transient absorption and time-resolved resonance Raman spectroscopy in various acetonitrile-water mixtures. The results are interpreted on the basis of a preferential solvation effect resulting from the presence of a specific interaction between 44BPY and water by hydrogen bonding. Below 10% water, the free 44BPY species is dominant and leads upon photoreduction to a contact ion pair that undergoes efficient intrapair proton transfer if TEA is the amine donor. Above 10% water, most of the 44BPY population is H-bonded and leads upon photoreduction to a hydrated ion pair in which the intrapair proton transfer is inhibited. Instead, the 44BPY(-*) species is protonated by water through the hydrogen bond with a rate constant that increases by more than 3 orders of magnitude on going from 10% to 100% water. The dependence of this rate constant on the solvent mixture composition suggests that the reaction of intracomplex proton transfer is controlled by the hydration of the residual OH(-) species by three molecules of water, leading to a trihydrated HO(-)(H(2)O)(3) species.     

Interaction of giant extracellular Glossoscolex paulistus hemoglobin (HbGp) with zwitterionic surfactant N-hexadecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (HPS): effects of oligomeric dissociation

The present work focuses on the interaction between the zwitterionic surfactant N-hexadecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (HPS) and the giant extracellular hemoglobin of Glossoscolex paulistus (HbGp). Electronic optical absorption, fluorescence emission and circular dichroism spectroscopy techniques, together with Gel-filtration chromatography, were used in order to evaluate the oligomeric dissociation as well as the autoxidation of HbGp as a function of the interaction with HPS. A peculiar behavior was observed for the HPS–HbGp interaction: a complex ferric species formation equilibrium was promoted, as a consequence of the autoxidation and oligomeric dissociation processes. At pH 7.0, HPS is more effective up to 1 mM while at pH 9.0 the surfactant effect is more intense above 1 mM. Furthermore, the interaction of HPS with HbGp was clearly less intense than the interaction of this hemoglobin with cationic (CTAC) and anionic (SDS) surfactants. Probably, this lower interaction with HPS is due to two factors: (i) the lower electrostatic attraction between the HPS surfactant and the protein surface ionic sites when compared to the electrostatic interaction between HbGp and cationic and anionic surfactants, and (ii) the low cmc of HPS, which probably reduces the interaction of the surfactant in the monomeric form with the protein. The present work emphasizes the importance of the electrostatic contribution in the interaction between ionic surfactants and HbGp. Furthermore, in the whole HPS concentration range used in this study, no folding and autoxidation decrease induced by this surfactant were observed. This is quite different from the literature data on the interaction between surfactants and tetrameric hemoglobins, that supports the occurrence of this behavior for the intracellular hemoglobins at low surfactant concentration range. Spectroscopic data are discussed and compared with the literature in order to improve the understanding of hemoglobin–surfactant interaction as well as the acid isoelectric point (pI) influence of the giant extracellular hemoglobins on their structure–activity relationship.     

The acid-base equilibrium constants of some azine compounds in various aqueous-organic solvent mixtures

The acid dissociation constants of the protonated form of some azine compounds (acridine, acridine orange and neutral red, BH+) were determined pH-metrically at 25 degrees C and at the constant ionic strength I = 0.1 mol l(-1) (KNO3) in pure water as well as in various aqueous mixtures having different proportions (w/w%) of organic solvents. The organic solvents used are methanol, ethanol (as amphiprotic solvents), N,N-dimethylformamide, dimethylsulfoxide (as dipolar aprotic solvents) and acetonitrile (as a low basic solvent). The results obtained indicated that the pKa values decrease as the content of the organic solvent in the medium is increased. It is deduced that, the major effect responsible for this behaviour is the differences in stabilization of the free base (B) by dispersion forces and of the proton by its interaction with solvent and water molecules in aqueous-organic solvent mixtures (ion-solvent interaction). Moreover, it is concluded that the ability of the solvent to accept hydrogen bond from the protonated form (BH+) contributes significantly to the deprotonation process of the compounds.     

A new method of calculation of the melting temperatures of crystals of Group 1A metal halides and francium metal

A new method of calculation of melting temperatures of binary ionic crystals has been suggested. The method is based on finding a matrix relation between the ionic radii (the lattice energy U) and melting temperature of ionic crystals of the MX type, where M is a Group 1A metal, and X is a halogen. From the equation for the lattice energy U, a new equation has been derived for calculation of the melting temperature of ionic crystals with the use of only the ionic radii and the degree of bond ionicity ?: T _m = f(U, ?). The average error of determination of T _m for alkali-metal halides is 2.80%. The melting temperatures of francium halides and alkali-metal astatides (including FrAt) have been calculated. It has been shown that the accuracy of calculation of the melting temperature of ionic crystals depends on the degree of bond ionicity: the error increases with an increase in the covalent contribution. On the basis of the melting temperatures of metal halide crystals, a method has been developed for the calculation of the melting temperatures of corresponding metals. The melting temperature of francium has been calculated to be 24.861 ± 0.517°C.     

Relative volatilities of ionic liquids by vacuum distillation of mixtures

The relative volatilities of a variety of common ionic liquids have been determined for the first time. Equimolar mixtures of ionic liquids were vacuum-distilled in a glass sublimation apparatus at approximately 473 K. The composition of the initial distillate, determined by NMR spectroscopy, was used to establish the relative volatility of each ionic liquid in the mixture. The effect of alkyl chain length was studied by distilling mixtures of 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids, or mixtures of N-alkyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ionic liquids, with different alkyl chain lengths. For both classes of salts, the volatility is highest when the alkyl side chain is a butyl group. The effect of cation structure on volatility has been determined by distilling mixtures containing different types of cations. Generally speaking, ionic liquids based on imidazolium and pyridinium cations are more volatile than ionic liquids based on ammonium and pyrrolidinium cations, regardless of the types of counterions present. Similarly, ionic liquids based on the anions [(C2F5SO2)2N](-), [(C4F9SO2)(CF3SO2)N](-) , and [(CF3SO2)2N](-) are more volatile than ionic liquids based on [(CF3SO2)3C](-) and [CF3SO3](-), and are much more volatile than ionic liquids based on [PF6](-).