(Pd-Cu)/C上苯乙烯氧化羰化合成肉桂酸甲酯的研究

在常压130℃下研究了Pd-Cu催化剂组成,反应温度,少量添加剂和原料气中O_2含量等对苯乙烯氧化羰化合成肉桂酸甲酯的影响,并对催化剂的形、相态进行表征.发现O_2有双重作用;O_2不仅使Pd-Cu之间的价态循环,而且能抑制反应过程中饱和苯丙酸甲酯的生成.指出催化反应中Pd-Cu之间的催化协同效应促进了产物的生成.初步讨论了本反应的机理.     

Selectivity tuning of cyclodextrin derivatives by specific substitution

A new, highly enantioselective cyclodextrin derivative combining the properties of heptakis(6‐O‐tert‐butyldimethylsilyl‐2,3‐di‐O‐methyl)‐β‐cyclodextrin and heptakis(2,3‐di‐O‐acetyl‐6‐O‐tert‐butyldimethylsilyl)‐β‐cyclodextrin was prepared by exchanging a methyl group for an acetyl substituent in a single glucose unit of heptakis(6‐O‐tert‐butyldimethylsilyl‐2,3‐di‐O‐methyl)‐β‐cyclodextrin. A comparative evaluation of the separation capabilities showed that the enantioselectivity of both “parent” cyclodextrin derivatives is transferred to the new chiral stationary phase.     

The separation of enantiomers on modified cyclodextrin columns: Measurements and molecular modeling

The enantiomers of 2-chloropropionic acid methyl ester, cis-pinane, 2-bromoethylbenzene, 2-bromobutane, 2-hydroxybutane trifluoroacetyl ester, and styrene oxide have been resolved on an octakis-(3-O-butyryl-2,6-di-O-pentyl)-γ-cyclo-dextrin capillary column, and the separation of the styrene oxide enantiomers has also been studied on columns coated with octakis-(3-O-trifluoroacetyl-2,6-di-O-pentyl)-cyclodextrin, octakis-(2,3,6-tri-O-pentyl)-γ-cyclodextrin, heptakis-(3-O-trifluoroacetyl-2,6-di-O-pentyl)-β -cyclodextrin, and heptakis-(2,3,6-tri-O-methyl)-β-cyclodextrin. Thermodynamic parameters (ΔG, ΔH, and ΔS) were determined from variable temperature measurements. The inclusion complexes containing styrene oxide were also studied by molecular modeling techniques. It has been found that a combined molecular mechanics–molecular dynamics approach may be a valuable tool for rationalizing the qualitative trends observed in the experimental separation factors. For the inclusion complexes considered here it is shown that the orientation of the guest relative to the cyclodextrin host is determined by the size and polarity of the cyclodextrin.     

Efficient transport of saccharides through a liquid membrane mediated by a cyclodextrin dimer

A new efficient system for transporting saccharides through a liquid membrane has been constructed. The transport rates of saccharides were accelerated greatly by the cyclodextrin dimer 2; by contrast, the corresponding cyclodextrin monomer 1 was not effective at mediating saccharide transport. The transport rate of D-ribose through a chloroform liquid membrane was 17 times faster when the cyclodextrin dimer 2 was used as the transporter than when the cyclodextrin monomer 1 was used. Similarly the transport rate of methyl D-galactopyranoside was 16 times faster by 2 than by 1.     

Environmentally friendly procedure for the aqueous oxidation of benzyl alcohols to aldehydes with dibromodimethylhydantoin (DBDMH) and cyclodextrin: Scope and mechanistic insights

Reported herein is an environmentally friendly procedure for the oxidation of benzyl alcohols to aldehydes using an inexpensive, commercially available reagent, 1,3-dibromo-5,5-dimethylhydantoin (DBDMH), and a variety of cyclodextrin additives under fully aqueous solvent conditions. This reaction proceeds with moderate to good yields for a broad scope of benzyl alcohol substrates, with the cyclodextrin acting to enhance the desired reactivity and limit undesired aromatic bromination side products. The reported experiments provide substantial mechanistic insight that will drive further reaction optimization and have broad-reaching applications.     

Palladium–dppb–borate‐catalyzed regioselective synthesis of cinnamate esters by alkoxycarbonylation of phenylacetylene

The regioselective alkoxycarbonylation of phenylacetylene into various cinnamate esters was achieved with a catalyst system formed from palladium (II), 1,4‐bis(diphenylphosphino) butane (dppb) and salicylborate complex in acetonitrile as a solvent. The influence of various parameters on the overall conversion of phenylacetylene and the selectivity of the reaction were studied systematically by varying the type of palladium complex, acids promoter, CO pressure, temperature and the reaction time. This investigation allowed us to obtain the predominant formation of cinnamate esters with excellent selectivity (90–96%). Copyright © 2008 John Wiley & Sons, Ltd.     

Complexation of morin with three kinds of cyclodextrin. A thermodynamic and reactivity study

Properties of inclusion complexes between morin (M) and beta-cyclodextrin (betaCD), 2-hydroxypropyl-beta-cyclodextrin (HPbetaCD) and Heptakis (2,6-O-di methyl) beta-cyclodextrin (DMbetaCD) such as aqueous solubility and the association constants of this complex have been determined. The water solubility of morin was increased by inclusion with cyclodextrins. The phase-solubility diagrams drawn from UV spectral measurements are of the A(L)-type. Also ORAC(FL) studies were done. An increase in the antioxidant reactivity is observed when morin form inclusion complex with the three cyclodextrin studied. Finally, thermodynamics studies of cyclodextrin complexes indicated that for DMbetaCD the inclusion is primarily enthalpy-driven process meanwhile betaCD and HPbetaCD are entropy-driven processes. This is corroborated by the different inclusion geometries obtained by 2D-NMR.     

Electrochemical bromination of cyclic and acyclic enes using biphasic electrolysis

A simple method of electrochemical bromination of a series of cyclic and acyclic enes (styrene and substituted styrenes, stilbene, indene, and cyclooctene) in a biphasic water–chloroform mixture mediated by bromide/bromine redox system is reported. Aqueous 25% NaBr/H₂SO₄ is used as the electrolyte. Regio- and stereoselective dibromination of enes is achieved. Moderate to excellent yields of the product (83–98%) is obtained depending on the substrate. Electrolyte reuse has also been demonstrated successfully using HBr in the dibromination of styrene.     

1,3-Dipolar Cycloaddition of 5-Substituted-1-Methyl-3-Oxidopyridiniums

5-Methoxy- and 5-dimethylamino-1-methyl-3-oxidopyridiniums were shown to give the 1,3-dipolar cycloadducts widely with methyl acrylate, acrylonitrile, N-phenylmaleimide, styrene, phenylacetylene, cyclopentadiene, cyclopentene, diethyl azodicarboxylate and singlet oxygen.     

Self-assembled cyclodextrin nanoparticles and drug delivery

Drug/cyclodextrin complexes self-assemble in aqueous solutions to form nanosized aggregates or nanoparticles. These complex aggregates are responsible for many of the physicochemical and biological properties of cyclodextrin complexes. Due to the aggregate formation aqueous drug/cyclodextrin solutions can behave more like dispersed nanoscale systems, such as nano-suspensions and liposomes, rather than true solutions. The aggregation can result in enhanced cyclodextrin solubilization of poorly soluble lipophilic drugs; they can serve as building blocks for ternary or higher order complexes; they can be developed into nano- and microparticulated drug carriers for targeted drug delivery to, for example, hair follicles; they can be developed into sustained drug delivery systems; and they can possible be used as mucus-penetrating drug delivery vectors. All of this can be obtained without chemical modifications of the cyclodextrin monomers.     

Chiral conformations induced by cyclodextrin

Studies of chiroptical properties need separation or at least enrichment of enantiomers. The separation is difficult with chiral conformers of molecules with very low barriers of internal rotation. However, in association with cyclodextrin, these labile molecules can exhibit a strong Cotton effect in solution: one chiral conformer is favoured by complexation. The cyclodextrins have the advantage to yield inclusion complex in solution as well as crystalline clathrates. Therefore, the absolute configuration of the guest can be obtained by determining the structure of the cyclodextrin. In this work, the first CD spectrum of 4-helicene is recorded and crystal structures of several clathrates of labile molecules are studied.     

Capillary electrophoretic enantioseparation of basic drugs using a new single‐isomer cyclodextrin derivative and theoretical study of the chiral recognition mechanism

A novel single‐isomer cyclodextrin derivative, heptakis {2,6‐di‐O‐[3‐(1,3‐dicarboxyl propylamino)‐2‐hydroxypropyl]}‐β‐cyclodextrin (glutamic acid‐β‐cyclodextrin) was synthesized and used as a chiral selector in capillary electrophoresis for the enantioseparation of 12 basic drugs, including terbutaline, clorprenaline, tulobuterol, clenbuterol, procaterol, carvedilol, econazole, miconazole, homatropine methyl bromide, brompheniramine, chlorpheniramine and pheniramine. The primary factors affecting separation efficiency, which include the background electrolyte pH, the concentration of glutamic acid‐β‐cyclodextrin and phosphate buffer concentration, were investigated. Satisfactory enantioseparations were obtained using an uncoated fused‐silica capillary of 50 cm (effective length 40 cm) × 50 μm id with 120 mM phosphate buffer (pH 2.5–4.0) containing 0.5–4.5 mM glutamic acid‐β‐cyclodextrin as background electrolyte. A voltage of 20 kV was applied and the capillary temperature was kept at 20°C. The results proved that glutamic acid‐β‐cyclodextrin was an effective chiral selector for studied 12 basic drugs. Moreover, the possible chiral recognition mechanism of brompheniramine, chlorpheniramine and pheniramine on glutamic acid‐β‐cyclodextrin was investigated using the semi‐empirical Parametric Method 3.     

Direct synthesis of novel amphiphilic cyclodextrin

A novel amphiphilic cyclodextrin derivative was obtained by controlled esterification of lauric acid chloride on the primary face of the native β-cyclodextrin in a one step synthesis. The characterization of the substitution degree and isomer structure was performed by mass and NMR spectroscopies. A specific purification procedure by sublimation was developed in order to eliminate the excess of lauric acid molecules in the reaction product. The sublimation efficiency was assessed by differential scanning calorimetry (DSC) in quantifying the remaining fatty acid. In this way the duration of the sublimation process could be optimized.     

Regio‐selective peroxybromination of poly(vinyl methyl ketone) as versatile tool for generation active ATRP initiation sites on solid surfaces

Peroxybromination or so‐called radical bromination is an environmentally friendly process which involves the use of in situ generated bromine by action of hydrogen peroxide on sodium or ammonium bromide in acid medium. The reaction takes place at room temperature without eliminating hydrobromic acid and no needs the use of elemental bromine. The reaction with poly(vinyl methyl ketone) in biphasic system was demonstrated to result in quantitative bromination exclusively at the methyne carbon of the polymer. The brominated polymer was successfully used as multifunctional macroinitiator for atom transfer radical polymerization (ATRP) of styrene and MMA to give bottlebrush polymers, as evidenced by ¹H NMR and GPC. This strategy was demonstrated to provide a means of easy bromination of solid polystyrene microspheres (210–420 μm) constituting with vinyl methyl ketone copolymer segments. Bromoalkyl groups generated (1.3 mmol g^?1) in aqueous mixture were used for surface initiated ATRP of glycidyl methacrylate and styrene monomers to give dense graft chains tethered to the surfaces with hydrolysis‐proof linkages. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3892–3900     

Photochemical reactions of 7-aminocoumarins. 7. Reaction of 3-iodo-4-methyl-7-diethylcoumarin with olefins

A number of new 7-aminocoumarins having an unsaturated substituent in the 3 position were obtained as a result of photolysis of 3-iodo-4-methyl-7-diethylaminocoumarin with olefins, viz., styrene, acrylonitrile, methyl acrylate, methyl methacrylate, 4-vinylpyridine, 2-ethoxypropene, indent, ethyl -anilinocrotonate, and 2,5-norbornadiene, as well as with phenylacetylene. Regiospecificity and stereospecificity of the investigated photoreactions were established. The spectral-luminescence characteristics of the synthesized compounds are presented.For Communication 6, see [1].Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1033–1041, August, 1990.     

Synthesis of alkyl glycosides from cyclodextrin using cyclodextrin glycosyltransferase from Paenibacillus sp. RB01

Alkyl glycosides have potential use as biodegradable detergents due to their high surface activity with low toxicity. Recent progress in the application of enzymes to the preparation of these surface-active compounds demonstrates the advantages to the chemical synthesis. In this work, alkyl glycosides were, for the first time, synthesized from cyclodextrin (CD) and various soluble alcohols by transglycosylation reaction using cyclodextrin glycosyltransferase (CGTase) from Paenibacillus sp. RB01. Several alcohols (methanol, ethanol, 1-propanol, 2-propanol, 1-butanol and 2-butanol) as glycosyl-acceptor substrates were evaluated. It was found that the reaction products which were analyzed by TLC were maximum for 30% methanol, 20?C30% ethanol, 10?C20% 1-propanol, 10% 2-propanol, 8% 1-butanol and 5?C10% 2-butanol. In addition, the increase in the yield of alkyl glycoside formation was achieved by using methanol as an acceptor. Optimal reaction conditions for methyl glycoside synthesis from CD were to incubate 1.2% (w/v) ??-CD and 240 U/mL of CGTase in a water/methanol system containing 30% (v/v) methanol, pH 6.0 and a temperature of 40???C. At least three main methyl glycoside products were formed having 1?C3 monosaccharide units attached to methanol which were in accordance with the results of MS analysis.     

Retardation of radical polymerization by phenylacetylene and its p-substituted derivatives

Radical polymerizations of styrene and methyl methacrylate in the presence of phenylacetylene and five of its p-substituted derivatives were carried out with the use of 2,2′-azobisisobutyronitrile as the initiator at 60°C. The initial overall rates of the polymerizations of styrene and methyl methacrylate in the presence of phenylacetylene were not proportional to the square root of the initiator concentration under the experimental conditions employed. The relationship between the overall polymerization rate and the concentration of the phenylacetylenes could be expressed by the Kice equation for the rate of a radical polymerization in the presence of a terminator. From this relationship the rate constant (k_s) of the reaction of a growing polymer radical with the phenylacetylenes and the constant C_s = (k_s/k_p), where k_p is the propagation rate constant of vinyl monomers, were determined. The C_s value thus obtained agree well with that derived from the relationship between the number-average degree of polymerization and the molar ratio of the phenylacetylenes to the vinyl monomer. Therefore the mechanism of the reaction may be considered as being one in which the growing radical reacts with the ethynyl group of the phenylacetylenes to yield a comparatively stable radical which terminates mainly by reaction with the growing radical, and so apparently the phenylacetylenes retard the vinyl polymerization. The substituent effects on the reaction were discussed on the basis of the following modified Hammett equation proposed by Yamamoto and Otsu: log [C_s(p-sub. PA)/C_s(PA)] = ρσ + γE_R where PA represents phenylacetylene, σ and E_R are the Hammett polar substituent constant and resonance substituent constant, respectively, and both ρ and γ are reaction constants. The γ value for the polymerization of both styrene and methyl methacrylate was 1.7. The ρ value was 1.0 for the polymerization of styrene and approximately zero for that of methyl methacrylate. These results demonstrate that the reactivity of the phenylacetylenes with the growing chain is influenced by both polar and resonance effects of their p-substituents in the degradative copolymerization of styrene and only by the resonance effect in that of methyl methacrylate.     

Structure of a cyclodextrin functionalized anionic clay: XRD analysis, spectroscopy, and computer simulations

Carboxy-methyl beta-cyclodextrin (CMCD) cavities have been intercalated within the galleries of anionic clay, Mg-Al layered double hydroxide (LDH). The cyclodextrin functionalized LDH has been reported to adsorb neutral and nonpolar guest molecules. X-ray diffraction, IR, and Raman vibrational spectroscopy and (13)C CPMAS NMR have been used to characterize the confined CMCD molecules, whereas molecular dynamics simulations have been used to probe the interlayer arrangement and orientation of the intercalated species. Spectroscopic measurements as well as MD simulations show that there is no significant change in the geometry of the CMCD cavity on intercalation. Within the galleries of the anionic clay, the CMCD anions are arranged as bilayers with the carboxy methyl substituents, located at the narrower opening of the bucket-like cyclodextrin toroid, anchored to the LDH sheet. This arrangement leaves the wider opening of the CMCD anion facing away from the layers allowing the interior of the cyclodextrin cavity to be accessible to guest molecules. Finally, the hydrophobicity of the anchored cyclodextrin cavity has been characterized using fluorescence from pyrene included within it.     

Analysis of styrenated methyl esters of linseed oil fatty acids by molecular distillation

The distillation of the reaction product of methyl esters of linseed oil fatty acids and gaseous styrene at 280° C in a highly efficient molecular still is described. From the specific refractions of the fractions obtained it follows that styrene has combined chemically with the esters.     

Tailoring of polymers by combination of ionic and radical controlled polymerizations

Poly(methyl methacrylate)s with terminal bromine atom, prepared by bromination of anionically polymerized MMA, were used as ATRP macroinitiators giving di- and triblock copolymers with MMA, styrene and butyl acrylate blocks. Multifunctional ATRP macroinitiators were synthesized by introducing bromomethyl or 2-bromoacyloxy groups onto the main chain of polystyrene or poly(4-methyl styrene) and used for ATRP grafting of tert-butyl acrylate leading to densely grafted copolymers with more or less uniform grafts.