Performance of solid-state hybrid supercapacitor with LiFePO4/AC composite cathode and Li4Ti5O12 as anode

We report the studies on quasi-solid battery-supercapacitor (BatCap) systems fabricated using sol–gel-prepared LiFePO₄ and its composites (LACs) with activated charcoal (AC) as hybrid cathode and Li₄Ti₅O₁₂ powder as anode separator by flexible gel polymer electrolyte (GPE) film. The GPE film comprises 1.0 M lithium trifluoromethane sulfonate (LiTf) solution in ethylene carbonate (EC)–propylene carbonate (PC) mixture, immobilized poly(vinylidene fluoride-co-hexafluoro-propylene) (PVdF-HFP), which is of high ionic conductivity (∼3.8 × 10⁻³ S cm⁻¹ at 25 °C) and electrochemical stability window (∼3 V). The effect of the addition of AC in composite electrode LACs has been analyzed using various techniques such as X-ray diffraction, porosity analysis, and electrochemical methods. The interfaces of composite LACs and GPE film not only offer high rate performance but also show high specific energy (>27.8 Wh kg⁻¹) as compared to the symmetric supercapacitors and pristine lithium iron phosphate (LiFePO₄)-based lithium ion batteries. The full BatCap systems have been characterized by cyclic voltammetry and galvanostatic charge–discharge tests. The BatCap systems with composite electrodes (LACs) offer better cyclic performance as compared to that of pristine LiFePO₄-based BatCap or LIB LiFePO₄/Li₄Ti₅O₁₂.

     

Pseudo-capacitive properties of LiCoO<Subscript>2</Subscript>/AC electrochemical capacitor in various aqueous electrolytes

LiCoO₂ particles were synthesized by a sol-gel process. X-ray diffraction analysis reveals that the prepared sample is a single phase with layered structure. A hybrid electrochemical capacitor was fabricated with LiCoO₂ as a positive electrode and activated carbon (AC) as a negative electrode in various aqueous electrolytes. Pseudo-capacitive properties of the LiCoO₂/AC electrochemical capacitor were determined by cyclic voltammetry, charge–discharge test, and electrochemical impedance measurement. The charge storage mechanism of the LiCoO₂-positive electrode in aqueous electrolyte was discussed, too. The results showed that the potential range, scan rate, species of aqueous electrolyte, and current density had great effect on capacitive properties of the hybrid capacitor. In the potential range of 0–1.4 V, it delivered a discharge specific capacitance of 45.9 Fg^–1 (based on the active mass of the two electrodes) at a current density of 100 mAg^–1 in 1 molL^–1 Li₂SO₄ aqueous electrolyte. The specific capacitance remained 41.7 Fg^–1 after 600 cycles.     

Performance evaluation of polyacrylamide/silver composite as electrode material in electrochemical capacitor

In this research, polyacrylamide/Ag composite is synthesized and used as an electrode in an electrochemical capacitor (EC). The characterization of the composite is performed by X-ray diffraction, scanning electron microscopy, and cyclic voltammetry methods. The electrochemical characterization is conducted in an electrolytic solution of KOH and an electrolytic solution of Na₂SO₄. The capacitance of the polyacrylamide/Ag composite is associated mainly with the reduction/oxidation of Ag. The specific capacitance of the EC using the KOH electrolyte is 950 Fg^?1, which is better than the capacitance in the Na₂SO₄ electrolyte. This behavior is explained by the respective physical characteristics of the two electrolytes.     

Nano-composite LiMnPO4 as new insertion electrode for electrochemical supercapacitors

Nano-composite olivine LiMnPO₄ (nC-LMP) was found to exhibit facile pseudo-capacitive characteristics in aqueous as well as non-aqueous electrolytes. We demonstrated employing nC-LMP as positive electrode in hybrid electrochemical capacitors namely Li-Ion hybrid capacitors (LIC). Adapting a simple CVD technique, nano-crystallites of LiMnPO₄ were coated with carbon monolayers of ∼2 nm thick to circumvent its poor intrinsic electronic conductivity. The novelty is that the single crystallites were intimately covered with carbon ring and networked to the neighboring crystallites via the continuous carbon wire-like connectivity as revealed from HRTEM analysis. Single electrode faradic capacitance of 3025 Fg⁻¹ (versus standard calomel reference electrode) was deduced for carbon coated LMP, the highest reported hitherto in Li⁺ aqueous electrolytes. Employing nC-LMP as working electrode versus an activated carbon (AC), we obtained a high specific energy of 28.8 Wh kg⁻¹ with appreciable stability in aqueous electrolytes whereas in nonaqueous electrolyte there is an obvious increase in energy density (35 Wh kg⁻¹) due to wider potential window. That is, a full cell version of LIC, AC|Li⁺|LMP, was fabricated and demonstrated its facile cycling characteristics via removal/insertion of Li⁺ within nC-LMP (positive electrode) and the electrosorption of Li⁺ into mesoporous carbon (AC) (negative electrode). Such cells ensured a typical battery-like charging and EDLC-like discharging characteristics of LIC type electrochemical capacitors (ECs) which are desired to enhance safety and energy densities.     

LiFePO4在不同pH值水溶液中电化学性能表现及其衰减机理

LiFePO₄在含Li⁺水溶液中的电化学性能稳定性与水溶液的pH值密切相关,当溶液的pH值达到11后LiFePO₄在充放电循环过程中的容量衰减十分明显. 通过循环伏安测试、交流阻抗测试、电极充放电性能测试、非原位X射线衍射测试以及化学分析的方式对其容量衰减机理进行了研究. 结果表明LiFePO₄在pH=7的LiNO₃水溶液中具有相对最高的电化学稳定性,但是LiFePO₄材料在水溶液中较之其在有机电解液中依然会有较差的电化学性能表现. 认为LiFePO₄在水介质中的容量衰减现象归因于其在持续充放电过程中的Li、Fe、P溶解,同时电极表面也会附着一层沉淀物. 这些最终导致了材料晶体结构的破坏、电极极化的增大以及电极容量的衰减.     

Kinetic study on LiFePO<Subscript>4</Subscript>-positive electrode material of lithium-ion battery

LiFePO₄-positive electrode material was successfully synthesized by a solid-state method, and the effect of storage temperatures on kinetics of lithium-ion insertion for LiFePO₄-positive electrode material was investigated by electrochemical impedance spectroscopy. The charge-transfer resistance of LiFePO₄ electrode decreases with increasing the storage temperatures. This suggests that it has a high electrochemical activity at high temperature. The diffusion coefficient of lithium ion is greatly increased with increasing the storage temperatures, indicating that the kinetics of Li⁺ and electron transfer into the electrodes were much fast at high storage temperature.     

Stability of LiFePO4 in water and consequence on the Li battery behaviour

The stability of LiFePO₄ in water was investigated. Changes upon exposure to water can have several important implications for storage conditions of LiFePO₄, aqueous processing of LiFePO₄-based composite electrodes, and eventually for utilisation in aqueous lithium batteries. A Li₃PO₄ layer of a few nanometers thick was characterised at the LiFePO₄ grains surface after immersion in water, accompanied by an increase of Fe^III percentage in the grains. For first charge–discharge cycles in a lithium battery, no effect was observed on electrochemical performances for a sample of LiFePO₄ immersed for 24 h at a concentration of 50 g L⁻¹ without any pH modification. To limit the aging of LiFePO₄ during aqueous electrode processing, it is advised to reduce the immersion duration, to concentrate the LiFePO₄ suspensions, and not to modify the pH. In addition, since immersion in water mimics an accelerated exposure to air humidity, LiFePO₄ should be stored in a dry atmosphere. Paper presented at the 11th EuroConference on the Science and Technology of Ionics, Batz-sur-Mer, Sept. 9–15, 2007.     

Synthesis of spherical LiFePO4/C via Ni doping

Spherical LiFePO₄/C powders were synthesized by the conventional solid-state reaction method via Ni doping. Low-cost asphalt was used as both the reduction agent and the carbon source. An Ni-doped spherical LiFePO₄/C composite exhibited better electrochemical performances compared to an un-doped one. It presented an initial discharge capacity of 161 mAhg⁻¹ at 0.1 C rate (the theoretical capacity of LiFePO₄ with 5 wt% carbon is about 161 mAhg⁻¹). After 50 cycles at 0.5 C rate, its capacity remained 137 mAhg⁻¹ (100% of the initial capacity) compared to 115 mAhg⁻¹ (92% of the initial capacity) for an un-doped one. The electrochemical impedance spectroscopy analysis and cyclic voltammograms results revealed that Ni doping could decrease the resistance of LiFePO₄/C composite electrode drastically and improve its reversibility.     

Electrochemical behavior of Mg-doped 7LiFePO4–Li3V2(PO4)3 composite cathode material for lithium-ion batteries

Mg-doping effects on the electrochemical property of LiFePO₄–Li₃V₂(PO₄)₃ composite materials, a mutual-doping system, are investigated. X-ray diffraction study indicates that Mg doping decreases the cell volume of LiFePO₄ in the composite. The cyclic voltammograms reveal that the reversibility of the electrode reaction and the diffusion of lithium ion is enhanced by Mg doping. Mg doping also improves the conductivity and rate capacity of 7LiFePO₄–Li₃V₂(PO₄)₃ composite material and decreases the polarization of the electrode reaction. The discharge capacity of the Mg-doped composite was 93 mAh?g^?1 at the current density of 1,500 mA?g^?1, and Mg-doped composite has better discharge performance than the original 7LiFePO₄–Li₃V₂(PO₄)₃ composite at low temperature, too. At ?30 °C, the discharge capacity of Mg-doped LFVP is 89 mAh?g^?1, higher than that of the original composite. Electrochemical impedance spectroscopy study shows that Mg²⁺ doping could enhance the electrochemical activity of 7LiFePO₄–Li₃V₂(PO₄)₃ composite. Mg doping has a positive influence on the electrochemical performance of the LiFePO₄–Li₃V₂(PO₄)₃ composite material.     

Electrochemical and electrical properties of Nb- and/or C-containing LiFePO4 composites

A study of LiFePO₄-based electrodes prepared through various synthesis conditions is presented. From X-Ray diffraction, high resolution transmission electron microscopy, electrochemical Li⁺ extraction/insertion and electrical conductivity data we conclude that the use of starting precursors such as Li₂CO₃, FeC₂O₄·2H₂O and/or Nb(OC₆H₅)₅ produces LiFePO₄-based composites containing significant amounts of carbon. We never succeeded in doping LiFePO₄ with Nb to yield Li_1−xNb_xFePO₄ but produced, instead, crystalline β-NbOPO₄ and/or an amorphous (Nb, Fe, C, O, P) “cobweb” around LiFePO₄ particles which is responsible for superior electrochemical activity. AC-conductivity measurements conclude to a total electrical conductivity of ∼10^− 9 S cm^− 1 at 25 °C with an activation energy of ca. 0.65 eV for pure LiFePO₄ and LiFePO₄/β-NbOPO₄ composites. C-containing LiFePO₄ samples, including those that were tentatively but unsuccessfully doped with Nb, are much more conductive (up to 1.6 · 10^− 1 S cm^− 1) with an activation energy ΔE∼0.08 eV.     

Performance studies on composite gel polymer electrolytes for rechargeable magnesium battery application

Effect of micron-sized MgO particles dispersion on poly(vinylidenefluoride-co-hexafluoropropylene) (PVdF–HFP) based magnesium-ion (Mg²⁺) conducting gel polymer electrolyte has been studied using various electrical and electrochemical techniques. The composite gel films are free-standing and flexible with enough mechanical strength. The optimized composition with 10 wt% MgO particles offers a maximum electrical conductivity of ∼6×10⁻³ S cm⁻¹ at room temperature (∼25°C). The Mg²⁺ ion conduction in gel film is confirmed from cyclic voltammetry, impedance spectroscopy and transport number measurements. The applicability of the composite gel electrolyte to a rechargeable battery system has been examined by fabricating a prototype cell consisting of Mg (or Mg–MWCNT composite) and V₂O₅ as negative and positive electrodes, respectively. The rechargeability of the cell has been improved, when Mg metal was substituted by Mg–MWCNT composite as negative electrode.     

CO2/ SOx-sensors with different β“-aluminas as solid electrolytes

Sensors with solid electrolytes provide the possibility of correct and fast measurements of partial pressures of various gases. By modification of the solid electrolyte, sensors with specific performances may be manufactured. Layers of Na⁺-, Li⁺-, Ca²⁺- and Sr²⁺-β“-alumina on top of polycrystalline α-alumina substrates were produced by an in-situ formation process and were used as solid electrolytes for CO₂ and SO_x sensors. Carbonates and sulphates were applied as measuring electrodes and oxidic mixtures of SiO₂ and silicates were used as reference electrodes. The different performance of these sensors was investigated over a wide temperature range and the results were compared with theoretical data. Different solid electrolyte / electrode combinations were applied, which all showed different characteristic cross sensitivities against water and organic components. Paper presented at the 5th Euroconference on Solid State Ionics, Benalmádena, Spain, Sept. 13–20, 1998.     

Effects of plasticizer and nanofiller on the dielectric dispersion and relaxation behaviour of polymer blend based solid polymer electrolytes

Solid polymer electrolytes consisted of poly(ethylene oxide) (PEO) and poly(methyl methacrylate) (PMMA) blend (50:50 wt/wt%) with lithium triflate (LiCF₃SO₃) as a dopant ionic salt at stoichiometric ratio [EO + (CO)]:Li⁺ = 9:1, poly(ethylene glycol) (PEG) as plasticizer (10 wt%) and montmorillonite (MMT) clay as nanofiller (3 wt%) have been prepared by solution cast followed by melt–pressing method. The X–ray diffraction study infers that the (PEO–PMMA)–LiCF₃SO₃ electrolyte is predominantly amorphous, but (PEO–PMMA)–LiCF₃SO₃–10 wt% PEG electrolyte has some PEO crystalline cluster, whereas (PEO–PMMA)–LiCF₃SO₃–10 wt% PEG–3 wt% MMT electrolyte is an amorphous with intercalated and exfoliated MMT structures. The complex dielectric function, ac electrical conductivity, electric modulus and impedance spectra of these electrolytes have been investigated over the frequency range 20 Hz to 1 MHz. These spectra have been analysed in terms of the contribution of electrode polarization phenomenon in the low frequency region and the dynamics of cations coordinated polymer chain segments in the high frequency region, and also their variation on the addition of PEG and MMT in the electrolytes. The temperature dependent dc ionic conductivity, dielectric relaxation time and dielectric strength of the plasticized nanocomposite electrolyte obey the Arrhenius behaviour. The mechanism of ions transportation and the dependence of ionic conductivity on the segmental motion of polymer chain, dielectric strength, and amorphicity of these electrolytes have been explored. The room temperature ionic conductivity values of the electrolytes are found ∼10⁻⁵ S cm⁻¹, confirming their use in preparation of all-solid-state ion conducting devices.     

Preparation and characteristics of Li4Ti5O12 with various dopants as anode electrode for hybrid supercapacitor

Spinel-Li₄Ti₅O₁₂ is successfully synthesized by a solid phase synthesis. The Li₄Ti₅O₁₂ powders with various dopants (Al³⁺, Cr³⁺, Mg²⁺) synthesized at 800 °C are in accordance with the Li₄Ti₅O₁₂ cubic spinel phase structure. The dopants are inserted into the lattice structure of Li₄Ti₅O₁₂ without causing any changes in structural characteristics. In order to study the effect on various dopants, the hybrid supercapacitor is prepared by using un-doped Li₄Ti₅O₁₂ and doped Li₄Ti₅O₁₂ in this work. The electrochemical performance of the hybrid supercapacitor is characterized by impedance spectroscopy and cycle performance. The results show Cr³⁺ and Mg²⁺ dopants enhance the conductivity of Li₄Ti₅O₁₂. Also, Al³⁺ substitution improves the reversible capacity and cycling stability of Li₄Ti₅O₁₂. It is found that effect of dopant on the electrochemical performance of Li₄Ti₅O₁₂ as electrode material for hybrid supercapacitor where the EDLC and the Li ion secondary battery coexist in one cell system.     

Combined XPS,electrochemical and Kelvin probe measurements of NaY zeolite

In the present study X-ray Photoelectron Spectroscopy (XPS) combined with in situ electrochemical and Kelvin probe measurements was used in order to get a deeper insight on the mechanism of the cation transport through NaY zeolite and the charge transfer through the Au electrode/zeolite interface. It is shown that by imposing a potential gradient across the NaY powder which is sandwiched between two electrodes, Na⁺ ions can be electrically transferred to or from the Au working electrode area, following the direction of the applied potential between the two electrodes. Two peaks corresponding to sodium species were detected by means of in situ XPS investigation during potential application. The first peak of Na1s photoelectrons with binding energy at 1072.2 ± 0.2 eV is attributed to Na adsorbed on the grounded Au electrode with its coverage remaining unchanged upon potential imposition. The second peak is directly associated with Na present in the zeolite and upon potential application its binding energy varies proportionally with the variation of the surface potential measured by Kelvin probe. Upon varying the potential from − 4 to + 4 V between the working and counter electrode, the Na⁺ concentration decreases by ca30% at the Au/zeolite interface. However the invariant amount of Na on the Au electrode under vacuum shows that the variation in Na⁺ concentration is not due to ionic transfer onto the Au surface but instead Na⁺ accumulation can be assumed at the Au/zeolite interface. On the other hand, current or potential application under O₂ atmosphere promotes the electrocatalytic reaction of Na⁺ towards the formation of Na₂O on the Au electrode surface.     

Carbon based double layer capacitors with aprotic electrolyte solutions: the possible role of intercalation/insertion processes

The extraordinary stability and cycle life performance of today’s electrochemical double-layer capacitors (EDLCs) are generally ascribed to the fact that charge storage in activated carbon (AC) is based on pure double-layer charging. In contrast, Faradaic charge-transfer reactions like those occurring in batteries are often connected with dimensional changes, which can affect the cycle life of these storage devices. Here we report the charge-induced height change of an AC electrode in an aprotic electrolyte solution, 1 mol/l (C₂H₅)₄NBF₄ (TEABF₄) in acetonitrile. The results are compared with those obtained for a graphite electrode in the same electrolyte. For both electrodes, we observe an expansion/contraction of several percent for a potential window of ±2 V vs. the immersion potential (ip). For the EDLC electrode, significant expansion starts at about 1 V remote from the ip and hence is well within the normal EDLC operation range. For the graphite electrode, the height changes are unambiguously caused by intercalation/deintercalation of both anions and cations. The close analogies between the graphite and the EDLC electrode suggest that ion intercalation or insertion processes might play a major role for charge storage, self discharge, cyclability, and the voltage limitation of EDLCs. PACS 82.47.Uv; 82.45.Fk; 82.45.Gj; 82.80.Fk; 81.05.Uw     

Structural and electrochemical properties of Nd-doped LiFePO4/C prepared without using inert gas

To further improve the electrochemical performance of LiFePO₄/C, Nd doping has been adopted for cathode material of the lithium ion batteries. The Nd-doped LiFePO₄/C cathode was synthesized by a novel solid-state reaction method at 750 °C without using inert gas. The Li_0.99Nd_0.01FePO₄/C composite has been systematically characterized by X-ray diffraction, EDS, SEM, TEM, charge/discharge test, electrochemical impedance spectroscopy and cyclic stability. The results indicate that the prepared sample has olivine structure and the Nd³⁺ and carbon modification do not affect the structure of the sample but improve its kinetics in terms of discharge capacity and rate capability. The Li_0.99Nd_0.01FePO₄/C powder exhibited a specific initial discharge capacity of about 161 mAh g^− 1 at 0.1 C rate, as compared to 143 mAh g^− 1 of LiFePO₄/C. At a high rate of 2 C, the discharge capacity of Li_0.99Nd_0.01FePO₄/C still attained to 115 mAh g^− 1 at the end of 20 cycles. EIS results indicate that the charge transfer resistance of LiFePO₄/C decreases greatly after Nd doping.     

Characterization of solid electrolytes prepared from ionic glass and ionic liquid for all-solid-state lithium batteries

Glassy solid electrolytes were prepared by combining the 50Li₂SO₄·50Li₃BO₃ (mol%) ionic glass and the 1-ethyl-3-methyl-imidazolium tetrafluoroborate ([EMI]BF₄) ionic liquid. High-energy ball milling was carried out for the mixture of the inorganic ionic glass and the organic ionic liquid. The ambient temperature conductivity of the glass electrolyte with 10 mol% [EMI]BF₄ was 10⁻⁴ S cm⁻¹, which was three orders of magnitude higher than that of the 50Li₂SO₄·50Li₃BO₃ glass. The addition of [EMI]BF₄ to the ionic glass decreased glass transition temperature (T_g) of the glass and the decrease of T_g is closely related to the enhancement of conductivity of the glass. Morphology and local structure of the glass electrolyte was characterized. The dissolution of an ionic liquid in an ionic glass with Li⁺ ion conductivity is a novel way to developing glass electrolytes for all-solid-state lithium secondary batteries.     

Electrochemical properties of thin TiO2 electrode on Li1 + xAlxGe2 − x(PO4)3 solid electrolyte

A fabrication of all-solid-state thin-film rechargeable lithium ion batteries by sol-gel method is expected to achieve both the simplification and cost reduction for fabrication process. TiO₂ thin film electrode was prepared by PVP (polyvinylpyrrolidone) sol-gel method combined with spin-coating on Li_1 + xAl_xGe_2 − x(PO₄)₃ (LAGP) solid electrolyte which has wide electrochemical window. The thin film was composed of anatase TiO₂ that is the most active phase for Li insertion and extraction and contacted well with LAGP substrate. In the cyclic voltammogram, a redox couple was observed at 1.8 V vs. Li/Li⁺ assigned to Li insertion/extraction into/from anatase TiO₂, indicating that the thin film worked as electrode for lithium battery. The charge and discharge test in various charge and discharge rates revealed that the discharge process (delithiation) is thought to be faster than charge process (lithiation). It is attested that the sol-gel process, which derives both simplification and cost reduction for fabrication process, can be applied to thin film battery using LAGP solid electrolyte.     

A PEG-assisted rheological phase reaction synthesis of 5LiFePO<Subscript>4</Subscript>⋅Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C as cathode material for lithium ion cells

5LiFePO₄⋅Li₃V₂(PO₄)₃/C composite cathode material is synthesized by a polyethylene glycol (PEG)-assisted rheological phase method. As a surfactant and dispersing agent, PEG can effectively inhabit the aggregation of colloidal particles during the formation of the gel. Meanwhile, PEG will coat on the particles to play the role of carbon source during the sintering. The samples are characterized by X-ray diffraction (XRD), scanning electron microscopy, and electrochemical methods. XRD results indicate that the 5LiFePO₄⋅Li₃V₂(PO₄)₃/C composites are well crystallized and contain olivine-type LiFePO₄ and monoclinic Li₃V₂(PO₄)₃ phases. The composite synthesized at 650 °C exhibits the initial discharge capacities of 134.8 and 129.9 mAh g⁻¹ and the capacity retentions of 96.2 and 97.1 % after 50 cycles at 1C and 2C rates, respectively.