Endoperoxides Revealed as Origin of the Toxicity of Graphene Oxide

Potential biomedicinal applications of graphene oxide (GO), for example, as a carrier of biomolecules or a reagent for photothermal therapy and biosensing, are limited by its cytotoxicity and mutagenicity. It is believed that these properties are at least partially caused by GO‐induced oxidative stress in cells. However, it is not known which chemical fragments of GO are responsible for this unfavorable effect. We generated four GOs containing variable redox‐active groups on the surface, including Mn²⁺, C‐centered radicals, and endoperoxides (EPs). A comparison of the abilities of these materials to generate reactive oxygen species in human cervical cancer cells revealed that EPs play a crucial role in GO‐induced oxidative stress. These data could be applied to the rational design of biocompatible nontoxic GOs for biomedical applications.     

Graphite Oxides: Effects of Permanganate and Chlorate Oxidants on the Oxygen Composition

Research on graphene materials has refocused on graphite oxides (GOs) in recent years. The fabrication of GO is commonly accomplished by using concentrated sulfuric acid in conjunction with: a) fuming nitric acid and KClO₃ oxidant (Staudenmaier); b) concentrated nitric acid and KClO₃ oxidant (Hofmann); c) sodium nitrate for in situ production of nitric acid in the presence of KMnO₄ (Hummers); or d) concentrated phosphoric acid with KMnO₄ (Tour). These methods have been used interchangeably in the graphene community, since the properties of GOs produced by these different methods were assumed as almost similar. In light of the wide applicability of GOs in nanotechnology applications, in which presence of certain oxygen functional groups are specifically important, the qualities and functionalities of the GOs produced by using these four different methods, side‐by‐side, was investigated. The structural characterizations of the GOs would be probed by using high resolution X‐ray photoelectron spectroscopy, nuclear magnetic resonance, Fourier transform infrared spectroscopy, and Raman spectroscopy. Further electrochemical applicability would be evaluated by using electrochemical impedance spectroscopy and cyclic voltammetry techniques. Our analyses highlighted that the oxidation methods based on permanganate oxidant (Hummers and Tour methods) gave GOs with lower heterogeneous electron‐transfer rates and a higher amount of carbonyl and carboxyl functionalities compared with when using chlorate oxidant (Staudenmaier and Hofmann methods). These observations indicated large disparities between the GOs obtained from different oxidation methods. Such insights would provide fundamental knowledge for fine tuning GO for future applications.     

Surface‐Coated Thermally Expandable Microspheres with a Composite of Polydisperse Graphene Oxide Sheets

Surface‐modified thermally expandable microcapsules (TEMs) hold potential for applications in various fields. In this work, we discussed the possible surface coating mechanism and reported the properties of TEMs coated with polyaniline (PANI) and polydisperse graphene oxide sheets (ionic liquid‐graphene oxide hybrid nanomaterial (ILs‐GO)). The surface coating of PANI/ ILs‐GO increased the corresponding particle size and its distribution range. The morphologies analyzed by scanning electron microscopy indicated that no interfacial gap was observed between the microspheres ink and substrate layer during the substrate application. The thermal properties were determined by thermogravimetric and differential thermal analyses. The addition of ILs‐GO to the polyaniline coating significantly improved the thermal expansion and thermal conductivity of the microcapsules. The evaporation of hexane present in the core of TEMs was not prevented by the coating of PANI/ ILs‐GO. The printing application of TEMs showed excellent adaptability to various flexible substrates with great 3D appearance. By incorporating a flame retardant agent into TEMs coated by PANI/ILs‐GO, finally, these TEMs also demonstrated a great flame retardant ability. We expect that these TEM‐coated PANI/ ILs‐GO are likely to have the potential to improve the functional properties for various applications.     

改性氧化石墨烯稳定Pickering乳液法制备高导热相变整体材料

采用表面引发原子转移自由基聚合法(SI-ATRP)改性氧化石墨烯(GO), 并用其稳定Pickering高内相乳液, 一步成型制得高导热氧化石墨烯/石蜡复合整体相变材料. 通过SI-ATRP方法, 在氧化石墨烯表面引入分子刷, 提高GO的分散性, 实现了低GO含量下优异的导热强化效果. 当GO添加量仅为相变复合材料整体的0.4%(质量分数)时, 其热导率(3.968 W?m^-1?K^-1)比纯石蜡的热导率(0.608 W?m^-1?K^-1)有较大提升. 通过测试发现, 在1000次循环后相变材料的泄漏率仅为1.1%~1.3%, 表现出良好的形状稳定性和热可靠性. 制备的新型形状稳定相变材料在温控、 储能应用中具有潜在的用途.     

Controllable synthesis of graphene sheets with different numbers of layers and effect of the number of graphene layers on the specific capacity of anode material in lithium-ion batteries

High quality graphene sheets are synthesized through efficient oxidation process followed by rapid thermal expansion and reduction by H₂. The number of graphene layers is controlled by tuning the oxidation degree of GOs. The higher the oxidation degree of GOs is getting, the fewer the numbers of graphene layers can be obtained. The material is characterized by elemental analysis, thermo-gravimetric analysis, scanning electron microscopy, atomic force microscopy, transmission electron microscopy and Fourier transform infrared spectroscopies. The obtained graphene sheets with single, triple and quintuplicate layers as anode materials exhibit a high reversible capacity of 1175, 1007, and 842 mA h g⁻¹, respectively, which show that the graphene sheets with fewer layers have higher reversible capacity.     

Highly Hydrogenated Graphene through Microwave Exfoliation of Graphite Oxide in Hydrogen Plasma: Towards Electrochemical Applications

Hydrogenated graphenes exhibit a variety of properties with potential applications in devices, ranging from a tunable band gap to fluorescence, ferromagnetism, and the storage of hydrogen. We utilize a one‐step microwave‐irradiation process in hydrogen plasma to create highly hydrogenated graphene from graphite oxides. The procedure serves the dual purposes of deoxygenation and concurrent hydrogenation of the carbon backbone. The effectiveness of the hydrogenation process is investigated on three different graphite oxides (GOs), which are synthesized by using the Staudenmaier, Hofmann, and Hummers methods. A systematic characterization of our hydrogenated graphenes is performed using UV/Vis spectroscopy, SEM, AFM, Raman spectroscopy, FTIR spectroscopy, X‐ray photoelectron spectroscopy (XPS), combustible elemental analysis, and electrical conductivity measurements. The highest hydrogenation extent is observed in hydrogenated graphene produced from the Hummers‐method GO, with a hydrogen content of 19 atomic % in the final product. In terms of the removal of oxygen groups, microwave exfoliation yields graphenes with very similar oxygen contents despite differences in their parent GOs. In addition, we examine the prospective application of hydrogenated graphenes as electrochemical transducers through a cyclic voltammetry (CV) study. The highly hydrogenated graphenes exhibit fast heterogeneous electron‐transfer rates, suggestive of their suitability for electrochemical applications in electrodes, supercapacitors, batteries, and sensors.     

Electron Transfer to Decorated Graphene Oxide Particles

Graphene oxides (GOs) are popular catalyst supports for precious metals in nanoparticle form. The hydrogen oxidation reaction (HOR) and the hydrogen evolution reaction (HER) on individual GO platelets decorated with Pd nanoparticles (Pd/GOs) were investigated. The results suggest that the catalytic activity is confined to the zone physically close to the point of electrical contact between platelet and electrode with just a fraction of the platelet active.     

The Toxicity of Graphene Oxides: Dependence on the Oxidative Methods Used

Graphene, a class of two‐dimensional carbon nanomaterial, has attracted extensive interest in recent years, with a significant amount of research focusing on graphene oxides (GOs). They have been primed as potential candidates for biomedical applications such as cell labeling and drug delivery, thus the toxicity and behavior of graphene oxides in biological systems are fundamental issues that need urgent attention. The production of GO is generally achieved through a top‐down route, which includes the usage of concentrated H₂SO₄ along with: 1) concentrated nitric acid and KClO₃ oxidant (Hoffmann); 2) fuming nitric acid and KClO₃ oxidant (Staudenmaier); 3) concentrated phosphoric acid with KMnO₄ (Tour); or 4) sodium nitrate for in‐situ production of nitric acid in the presence of KMnO₄ (Hummers). It has been widely assumed that the properties of these four GOs produced by using the above different methods are roughly similar, so the methods have been used interchangeably. However, several studies have reported that the toxicity of graphene‐related nanomaterials in biological systems may be influenced by their physiochemical properties, such as surface functional groups and structural defects. In addition, considering how GOs are increasingly used in the field of biomedicine, we are interested to see how the oxygen content/functional groups of GOs can impact their toxicological profiles. Since in‐vitro testing is a common first step in assessing the health risks related with engineered nanomaterials, the cytotoxicity of the GOs prepared by the four different oxidative treatments was investigated by measuring the mitochondrial activity in adherent lung epithelial cells (A549) by using commercially available viability assays. The dose–response data was generated by using two assays, the methylthiazolyldiphenyl‐tetrazolium bromide (MTT) assay and the water‐soluble tetrazolium salt (WST‐8). From the viability data, it is evident that there is a strong dose‐dependent cytotoxic response resulting from the four GO nanomaterials tested after a 24 h exposure, and it is suggested that there is a correlation between the amounts of oxygen content/functional groups of GOs with their toxicological behavior towards the A549 cells.     

Surface Modification of Graphene Oxides by Plasma Techniques and Their Application for Environmental Pollution Cleanup

Graphene oxides (GOs) have come under intense multidisciplinary study because of their unique physicochemical properties and possible applications. The large amount of oxygen‐containing functional groups on GOs leads to a high sorption capacity for the removal of various kinds of organic and inorganic pollutants from aqueous solutions in environmental pollution cleanup. However, the lack of selectivity results in difficulty in the selective removal of target pollutants from aqueous solutions in the presence of other coexisting pollutants. Herein, the surface grafting of GOs with special oxygen‐containing functional groups using low‐temperature plasma techniques and the application of the surface‐modified GOs for the efficient removal of organic and inorganic pollutants in environmental pollution are reviewed. This paper gives an account of our research on the application of GO‐based nanomaterials in environmental pollution cleanup, including: (1) the synthesis and surface grafting of functional groups on GOs, summarizing various types of low‐temperature plasma techniques for the synthesis of graphene/GOs; and (2) the application of graphene/GOs and their composites for the efficient removal of organic and inorganic pollutants from aqueous solutions, including the interaction mechanism according to recently published results.     

Processing micrometer-sized particles in crumpled graphene network for freestanding membrane enabled by freeze casting

Graphene oxide(GO)is widely used in the construction and application of various 2 D membrane-based materials due to its unique colloidal structure.Herein,we demonstrate that micrometer-sized particles can make up freestanding membranes enabled by the extraordinary amphiphilic and polymer-like properties of graphene oxide through freeze casting.The 2 D macromolecule,GO could well wrap the particles for better uniformity and stability in either dispersion or membrane.Importantly,freeze casting plays an important role in avoiding the severe aggregation of micrometer-sized particles in the solventremoving process.After reduction,the membrane exhibits good electrical conductivity while maintaining its integral structure,which can be directly used as a freestanding binder-free electrode.This work provides a universal approach to fabricate freestanding membranes with various micrometersized materials for energy storage.     

Ozonated Graphene Oxide Film as a Proton‐Exchange Membrane

Graphene oxide (GO) contains several chemical functional groups that are attached to the graphite basal plane and can be manipulated to tailor GO for specific applications. It is now revealed that the reaction of GO with ozone results in a high level of oxidation, which leads to significantly improved ionic (protonic) conductivity of the GO. Freestanding ozonated GO films were synthesized and used as efficient polymer electrolyte fuel cell membranes. The increase in protonic conductivity of the ozonated GO originates from enhanced proton hopping, which is due to the higher content of oxygenated functional groups in the basal planes and edges of ozonated GO as well as the morphology changes in GO that are caused by ozonation. The results of this study demonstrate that the modification of dispersed GO presents a powerful opportunity for optimizing a nanoscale material for proton‐exchange membranes.     

Functionalization of Graphene Oxide with 3‐Mercaptopropyltrimethoxysilane and Its Electrocatalytic Activity in Aqueous Medium

In this work, a highly dispersed graphene oxide (GO) was successfully functionalized with 3‐mercaptopropyltrimethoxysilane (MPTS) molecule by silanization method. The chemically generated GO and MPTS functionalized GO (MPTS‐GO) were structurally characterized by thermogravimetric analysis (TGA), X‐ray diffraction analysis (XRD), scanning electron microscope (SEM), energy dispersive X‐ray (EDAX), fourier transform infrared spectroscopy (FT‐IR) and ultraviolet visible spectroscopy (UV‐Vis) techniques. The MPTS‐GO is highly suspensable in water. The thermal and conductivity results for MPTS‐GO are significantly increased compared to GO. Moreover, glassy carbon electrode modified with MPTS‐GO hybrid (MPTS‐GO/GCE) was prepared by casting of the MPTS‐GO solution on GCE. The MPTS‐GO/GCE showed an excellent electrocatalytic activity towards methionine (Met). This was understood from the observed less positive oxidation potential and higher oxidation current when compared to bare GC electrode. The MPTS‐GO has excellent electrocatalytic activity, making it an ideal candidate for sensor applications.     

An Effective Method for Bulk Obtaining Graphene Oxide Solids

We report an effective method for bulk obtaining exfoliated graphene oxide (GO) solids from their aqueous solutions, which were prepared from nature graphite by an oxidation method. Tyndall effect proved that GO solution has a colloidal nature. Different flocculants were used to coagulate GO colloidal, and it was found that NaOH had the most obvious coagulation effect to GO. Transmission electron microscopy, X‐ray diffraction and atomic force microscopy analysis demonstrated that there were a large number of complete few‐layer GO sheets with thickness of about 0.8 nm, and the surfaces were very smooth, almost free of impurities. Liquid state ¹³C NMR and Fourier transformation infrared spectra showed the presence of abundant benzene carboxylic, hydroxyl and epoxide groups in the basal planes of GO. The graphene materials reduced from GO solids had good electrical conductivity. Our work explored a simple and effective route to extract GO from their solution, which is the most important to GO and graphene researches and applications.     

氮掺杂石墨烯的p型场效应及其精细调控

Functionalized graphene has attracted significant interest over the past decade due to its unique physical properties and potential applications. Graphene oxide (GO), a readily scaled-up product, is a basic material for further functionalization. Using reductive processes, highly conductive reduced graphene oxide (RGO) can be obtained, which exhibits electrical and optical properties analogous to those of graphene. Moreover, due to the presence of oxygen-containing functional groups, its chemical reactivity and electronic properties can be easily tailored by chemical doping with nitrogen. However, developing strategies for doping graphene is challenging and the fundamental roles of the doping atom configuration and its environment on the resulting properties of graphene remain poorly understood. These properties are important for electrical and catalytic applications of graphene. Thus, synthesizing specific configurations of nitrogen-doped graphene and consequently investigating the electrical and catalytic properties of the product is imperative. Herein, we demonstrate an approach that allows for successful production of nitrogen-functionalized RGO using Schiff base condensation between the amino groups in an o-aryl diamine compound and the carbonyl groups in GO. Three typical nitrogen-containing species including o-phenylenediamine (OPD), 2, 3-diaminopyridine (23DAP), and bis(trifluoromethyl)-1, 2-diaminobenzene (BTFMDAB) were used for functionalizing the GO samples, and the corresponding RGO derivatives (OPD-RGO, 23DAP-RGO, and BTF-RGO) were obtained by thermal annealing. Pyrazine nitrogen was successfully introduced into graphitic framework, as confirmed by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectra, thermal gravimetric analysis (TGA), Raman, and X-ray photoelectron spectroscopy (XPS). Field-effect transistors (FETs) based on the BTF-RGO exhibited hole-dominated ambipolar field-effect behavior with a Dirac point at a 9 V gate voltage and hole mobilities up to 2.5 times that of RGO. The weak p-type doping effect originated from the strongly electron-withdrawing trifluoromethyl groups. By studying the OPD-RGO and 23DAP-RGO-based FETs, containing pyrazine nitrogen and mixed pyrazine/pyridine nitrogen, respectively, we found that pyrazine nitrogen provided weak n-type doping effects, while pyridine nitrogen exhibited weak p-type doping effects due to its electron-withdrawing ability. Enhanced p-type doping effect was accompanied by the introduction of groups with stronger electron-withdrawing ability into the graphitic framework. Impressively, pyridine nitrogen in the pyrazine nitrogen-doped RGO yielded a weak p-type doped graphene due to the electron-withdrawing effect of the pyridine nitrogen. Nitrogen-doped graphene can be finely tuned from weak n-type to weak p-type doping by adjusting the electron-withdrawing ability of o-aryl diamine compounds. This study demonstrates the effect of nitrogen configuration and its surrounding environment on the electrical properties of RGOs, providing additional possible applications.     

Preparation of the hybrid film of poly(allylamine hydrochloride)-functionalized graphene oxide and gold nanoparticle and its application for laser-induced desorption/ionization of small molecules

Hybrid films of gold nanoparticles and graphene oxides (GOs) were prepared by directly growing gold nanoparticles on supported thin layers of GO films on a glass slide. The gold/GO nanohybrid films were thoroughly investigated using various analytical methods, including Raman spectroscopy and atomic force microscopy. The hybrid film was then applied to laser desorption/ionization (LDI) of small molecules, which enabled mass spectrometric analysis of analytes. After a series of detailed mechanistic studies and systematic investigations, we found that the gold/GO hybrid films serve as a successful LDI platform for small-molecule analysis because of the high desorption efficiency of analytes from the hybrid films without inducing significant fragmentation of analytes. We suggest that the underlying GO films may effectively dissipate excess thermal energy generated by laser irradiation of Au to prevent undesirable analyte fragmentation.     

Synthesis and characterization of bisulfonated poly(vinyl alcohol)/graphene oxide composite membranes with improved proton exchange capabilities

Composite membranes based on poly(vinyl alcohol) (PVA) and graphene oxide (GO) were prepared by solution-casting method to be used as proton exchange membranes (PEMs) in fuel cell (FC) applications. Bisulfonation was employed as a strategy to enhance the proton conductivity of these membranes. First, a direct sulfonation of the polymer matrix was accomplished by intra-sulfonation of the polymer matrix with propane sultone, followed by the inter-sulfonation of the polymer chains using sulfosuccinic acid (SSA) as a crosslinking agent. Furthermore, the addition of graphene oxide (GO) as inorganic filler was also evaluated to enhance the proton-conducting of the composite membranes. These membranes were fully characterized by scanning electron microscopy (SEM), Fourier transformed infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and tensile tests. Besides, the proton conductivity of these membranes in a fully hydrated state was also analyzed by electrochemical impedance spectroscopy (EIS). The effect of the intra- and inter-sulfonation of the polymer matrix on the structural, morphological, thermal and mechanical properties of the membranes were determined. Increasing the density of sulfonic acid groups in the membranes resulted in a trade-off between a better proton conductivity (improving from 0.26 to 1.00 mS/cm) and a decreased thermal and mechanical stability. In contrast, the incorporation of GO nanoparticles into the polymer matrix improved the thermal and mechanical stability of both bisulfonated composite membranes. The proton conductivity appreciably increased by the combination of bisulfonation and introduction of GO nanoparticles into the polymer matrix. The sPVA/30SSA/GO composite membrane exhibited a proton conductivity of 1.95 mS/cm at 25 °C. The combination of the GO nanoparticles with the chemical bisulfonation approach of PVA allows thus assembling promising proton exchange membrane candidates for fuel cell applications.     

Enhancement on the permeation performance of polyimide mixed matrix membranes by incorporation of graphene oxide with different oxidation degrees

Graphene oxide (GO) with different oxidation degrees were synthesized by harsh oxidation of graphite using the improved Hummers method. The GO/polyimide (PI) mixed matrix membrane was successfully fabricated by in situ polymerization of PI monomers (3,3′,4,4′‐biphenyltetracarboxylic dianhydride and 4,4′‐diaminodiphenyl ether) with GO. The structure of GO was characterized by Fourier transform infrared, transmission electron microscopy, atomic force microscopy, X‐ray diffraction, and thermal gravimetric analysis–differential thermal analysis. The performance of different GO/PI mixed matrix membranes was evaluated by permeation experiments of CO₂/N₂ gas mixture (volume ratio, 1:9). Results showed that more polar functional groups were introduced to GO with the increase in oxidation degree of GO in the preparation process, producing fewer layers and more translucent structures. GO with higher oxidation degree has significant effect on its dispersion in the N,N‐dimethylacetamide solvent and polymer matrix materials. The permeability of GO/PI hybrid membranes for CO₂ and N₂ increased. The CO₂/N₂ permeation selectivity of membranes exhibited a trend of initial increase, followed by a decrease, with the increase in oxidation degree, when the same amount of GO was added. For GO with the same oxidation degree, the permeability and permeation selectivity of hybrid membrane initially increased, and then decreased with the addition content of GO. In the case of hybrid membrane containing 1 wt% monolayer GO, the maximum permeability and permeation selectivity of hybrid membranes for CO₂ were 14.3 and 4.2 times more than that of PI membrane without GO, respectively. Copyright © 2015 John Wiley & Sons, Ltd.     

In‐Situ “molecular welding” preparation of graphene/polyimide hybrid film with superior thermal conductivity and flexibility

With the rapid development of electronic industry, thermal management has become a critical issue that severely restricts the application of portable devices. In this work, we fabricate a flexible and free‐standing graphitized‐graphene/polyimide (I‐g‐GO/PI) film via an in‐situ “molecular welding” strategy. With the help of in‐situ polymerization, PI can be well‐dispersed with GO and serves as a solder to enlarge the grain size of GO, resulting in an enhanced thermal conductivity of the film. The 7 wt % addition of PI into GO (I‐g‐GO/PI‐7%) leads to an in‐plane thermal conductivity as high as 1269.700 ± 1.498 W/m/K, which is 81.8% higher than that of the pristine graphene and also superior to that fabricated via solution blending method by 58.3%. Simultaneously, the hybrid film exhibits an excellent flexibility and survives from a 2000 cycles bending test. The large‐area hybrid film prepared by such an in‐situ “molecular welding” method provides a promising way to fabricate graphene‐based film for highly efficient thermal management. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1215–1223     

Non‐Enzymatic Electrochemical Detection of Glucose with a Gold Nanowire Array Electrode

High‐performance electrodes for in vivo electrochemical detection of glucose (GO) are highly desirable. In this work, we propose a new approach to efficiently and precisely prepare a Au nanowire array electrode (ANAE) with a line width of 78 nm and a large sensor area of 60 mm×60 mm for GO detection. In this approach three techniques, i.e., vacuum sputtering‐deposition, holography photolithography, and argon ion‐beam etching, are integrated. The fabricated ANAE exhibits good performance for GO detection. A linear amperometric response to the oxidation of GO in a concentration range of 0.4–10 mM is observed. The ANAE is characterized by its high detection sensitivity, selectivity, stability and good biocompatibility. All of these make it a promising tool for GO detection and other relevant applications.     

Probing the lower limit of lattice thermal conductivity in an ordered extended solid: Gd117Co56Sn112, a phonon glass-electron crystal system

The discovery of novel materials with low thermal conductivity is paramount to improving the efficiency of thermoelectric devices. As lattice thermal conductivity is inversely linked to unit cell complexity, we set out to synthesize a highly complex crystalline material with glasslike thermal conductivity. Here we present the structure, transport properties, heat capacity, and magnetization of single-crystal Gd(117)Co(56)Sn(112), a complex material with a primitive unit cell volume of ~6858 ?(3) and ~285 atoms per primitive unit cell (1140 atoms per face-centered cubic unit cell). The room temperature lattice thermal conductivity of this material is κ(L) = 0.28 W/(m·K) and represents one of the lowest ever reported for a nonglassy or nonionically conducting bulk solid. Furthermore, this material exhibits low resistivity at room temperature, and thus represents a true physical system that approaches the ideal phonon glass-electron crystal.