Non-metallic gold nanoclusters for oxygen activation and aerobic oxidation

In this review, oxygen activation and their aerobic oxidation over the Au nanoclusters are presented. The size-specificity, ligand engineering, and doping effects and the proposed reactions’ mechanism and the structure-activity relationships at the atomic level are also discussed.     

Enhanced effect of plasma on catalytic reduction of CO_2 to CO with hydrogen over Au/CeO_2 at low temperature

In terms of the reaction of CO_2 reduction to CO with hydrogen, CO_2 conversion is very low at low temperature due to the limitation of thermodynamic equilibrium(TE). To overcome this limitation, plasma catalytic reduction of CO_2 to CO in a catalyst-filled dielectric barrier discharge(DBD) reactor is studied. An enhanced effect of plasma on the reaction over Au/CeO_2 catalysts is observed. For both the conventionally catalytic(CC) and plasma catalytic(PC, Pin= 15 W) reactions under conditions of 400 °C, H_2/CO_2= 1,200 SCCM, GHSV = 12,000 mL·g~(-1)cat·h~(-1), CO_2 conversions over Au/CeO_2 reach 15.4% and 25.5% due to the presence of Au, respectively, however, those over CeO_2 are extremely low and negligible. Moreover,CO_2 conversion over Au/CeO_2 in the PC reaction exceeds 22.4% of the TE conversion. Surface intermediate species formed on the catalyst samples during the reactions are determined by in-situ temperatureprogrammed decomposition(TPD) technique. Interestingly, it disclosed that in the PC reaction, the formation of formate intermediate is enhanced by plasma, and the acceleration by plasma in the decomposition of formate species is much greater than that in the formation of formate species on Au/CeO_2. Enhancement factor is introduced to quantify the enhanced effect of plasma. Lower reactor temperature, higher gas hourly space velocity(GHSV), and lower molar ratio of H_2/CO_2 would be associated with larger enhancement factor.     

In situ FT-IR and TPD-MS study of carbon monoxide oxidation over a CeO2/Co3O4 catalyst

The forming of surface species during the adsorption of carbon monoxide (CO) and CO/O₂ on a CeO₂/Co₃O₄ catalyst was investigated by in situ Fourier transform infrared (FT-IR) spectroscopy and temperature programmed desorption-mass spectroscopy (TPD-MS). When CO was adsorbed on the CeO₂/Co₃O₄ catalyst, two types of surface species were distinguishable at room temperature: carbonate and bicarbonate. Surface carbonate was adsorbed on the cerium and cobalt, while the surface bicarbonate absorbed on the CeO₂/Co₃O₄ catalyst at 1611, 1391, 1216 and 830 cm⁻¹. Furthermore, the TPD-MS profiles revealed that the CeO₂/Co₃O₄ catalyst showed a greater amount of CO₂ than CO at 373 K. The CO desorption from the CeO₂/Co₃O₄ catalyst with increasing temperature showed that the order of thermal stability was surface bicarbonate < surface carbonate < interface carbonate species. Interestingly, the residual carbonate species could remain on the interface up to 473 K. The results revealed that surface bicarbonate could promote the conversion of CO into CO₂ for CO oxidation below 50 K.     

Improved activity of SnO for the photocatalytic oxygen evolution

SnO prepared by soft chemistry exhibits a black color and semiconducting properties. The X-ray diffraction indicates a tetragonal symmetry (SG: P4/nmm) with nano crystallites of an average size of 85 nm. The forbidden band, determined from the diffuse reflectance is found to be 1.46 eV. The electrical conductivity occurs by polaron hopping and follows an Arrhenius type law with activation energy of 0.21 eV, the change in the slope at 526 K is attributed to the oxidation to SnO₂. The photo-electrochemical study shows n type conduction with a flat band potential of ?0.45 V, close to the photocurrent onset potential (?0.40 V). The electrochemical impedance spectroscopy shows the bulk contribution of SnO (R_b = 1.7 kΩ cm²) and decreases down to 1.89 kΩ cm² under illumination. The photocatalytic properties have been evaluated for the first time for to the oxygen evolution. The valence band, deriving from Sn²⁺: 5p orbital with a potential (?0.80 V_SCE/5.55 eV), is suitably positioned with respect to O₂/H₂O level (～0.6 V_SCE), leading to water oxidation under visible light. The best performance occurs at pH ～ 7 with an oxygen liberation rate of 23 µmol mL h^?1 (mg catalyst)^?1 and a quantum efficiency of 1.2%. An improvement of ～13% is observed on the system SnO/clay.     

Nanoceria Supported Gold Catalysts for CO Oxidation

Two types of CeO₂ nanocubes (average size of 5 and 20 nm, respectively) prepared via the hydrothermal process were selected to load gold species via a deposition‐precipitation (DP) method. Various measurements, including X‐ray diffraction (XRD), Raman spectra, high resolution transmission electron microscopy (HRTEM), in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS), and temperature‐programmed reduction by hydrogen (H₂‐TPR), were applied to characterize the catalysts. It is found that the sample with ceria size of 20 nm (Au/CeO₂‐20) was covered by well dispersed both Au³⁺ and Au^δ+ (0 < δ < 1). For the other sample with ceria size of 5 nm (Au/CeO₂‐5), Au³⁺ is the dominant gold species. Au/CeO₂‐20 performed better catalytic activity for CO oxidation because of the strong CO adsorption of Au^δ+ in the catalysts. The catalytic activity of Au/CeO₂‐5 was improved due to the transformation of Au³⁺ to Au^δ+. Based on the CO oxidation and in situ DRIFTS results, Au^δ+ is likely to play a more important role in catalyzing CO oxidation reaction.     

通过CeOx修饰提高金纳米颗粒在CO氧化反应中的催化活性和耐久性

CO催化氧化是一个重要的经典反应,与许多应用息息相关,包括痕量CO气体检测、汽车尾气净化和安全防护等,吸引了人们广泛的研究兴趣.负载型Au纳米颗粒在CO氧化等许多反应中有着与众不同的催化活性,具有广泛的应用前景,但依然存在着稳定性差、易团聚失活的问题.人们通过应用多孔载体隔离Au纳米颗粒,在Au纳米颗粒表面覆盖金属氧化物、二氧化硅或碳,以及对Au纳米粒子进行封装等方法解决这些问题.尤其是利用金属氧化物与Au纳米粒子间的强相互作用对其进行覆盖或封装,有效地提高了Au催化材料的稳定性.但以上策略操作流程复杂,不利于应用.本文发展了一种简单有效的方法,通过EDTA的络合作用引入CeOx对Au纳米粒子进行修饰,得到的CeOx@Au/SiO2催化剂活性和耐久性明显提升.采用X射线衍射(XRD)和高分辨透射电子显微镜(HRTEM)证明了CeOx成功地修饰在Au纳米颗粒上.且通过EDTA引入CeOx所制备的CeOx@Au/SiO2催化剂结构明显不同于直接加入纳米CeO2所得到的CeOx-Au/SiO2的结构.EDTA的络合作用能有效地连结Ce与Au物种,经焙烧消除EDTA后,加强了CeOx与Au间相互作用,最终在Au纳米粒子表面形成丰富的CeOx颗粒与原子级厚度的CeOx层.进一步应用X射线光电子能谱(XPS)和氢气程序升温还原(H2-TPR)等手段研究了CeOx修饰对Au纳米粒子的影响.XPS结果表明,CeOx@Au/SiO2催化剂带正电的Au+和Au3+的浓度明显高于一般的Au/SiO2和直接加入CeO2制备得到的CeOx-Au/SiO2催化剂.H2-TPR同样表明,CeOx修饰调变了Au纳米粒子的氧化还原性.这些均对其在CO催化氧化反应中的催化活性具有重要影响将CeOx@Au/SiO2催化剂用于CO催化氧化反应中,160°C时,CO转化率达98.8％,至180°C后实现了CO的完全转化.而一般的Au/SiO2催化剂在160°C时CO转化率仅为4.0％,CO的完全转化则需340°C.直接加入纳米CeO2所得到的CeOx-Au/SiO2催化剂,其催化活性略有提升,CO完全转化所需的温度为300°C.这充分证明了通过CeOx修饰Au纳米粒子,能有效提升其催化活性.原位漫反射红外光谱(DRIFT)结果表明,CeOx修饰促进了CO在Au表面的吸附,并能形成[Au(CO)2]δ+物种;同时还观察到大量的单齿CO32? 物种信号,反映了CeOx@Au/SiO2催化剂表面存在丰富的活性氧物种.通入O2后,观察到了大量CO32?物种信号和气相CO2,印证了催化剂表面发生的CO催化氧化过程,也表明其具有非常高的催化活性.考察了CeOx@Au/SiO2催化剂的耐久性,发现经50 h CO氧化反应,催化剂依然能有效保持活性.相比之下,Au/SiO2催化剂经10 h反应后,开始明显失活.由此可见,CeOx@Au/SiO2催化剂具有相当高的耐久性.在600°C将催化剂焙烧3 h,发现Au/SiO2催化剂中Au纳米粒子存在明显团聚现象,而CeOx@Au/SiO2催化剂的Au纳米粒子依然均匀分布在载体表面,且粒径未发生明显变化.     

Determination of hydrogen sulfide in gasoline by Au nanoclusters modified glassy carbon electrode

A promising hydrogen sulfide (H₂S) sensor was prepared by electrodeposition of Au nanoclusters on glassy carbon electrode (GCE) and the surface structure was characterized by SEM and EDAX. These flower-like form Au nanoclusters, which were made up of highly dense clustering Au nanorods with an average diameter of 20 nm and length up to 80 nm, had an average size about 600 nm and uniformly distributed on the GCE surface. The electrocatalytic oxidation of H₂S in gasoline was performed on this modified electrode, which had a satisfactory liner response to H₂S in the range of 1–80 ppm and a detection limit of 0.45 ppm (s/n = 3). This sensor was sensitive, selective and stable.     

Theoretical study of Au/SAPO-11 catalyst and its potential use in thiophene HDS

Quantum chemistry calculations were carried out, using ONIOM2 methodology, in order to investigate the thiophene interaction with gold supported on silicoaluminophospates molecular sieves (Au/SAPO-11) catalysts. Two models were studied, one containing one Au atom per site, and the other with two Au atoms per site. Thiophene adsorption was found to be η¹ type. This adsorption presents a ΔH of ?13.2 and ?9.7 kcal/mol, for the models with one Au atom (Au/SAPO-11), and two Au atoms (Au₂/SAPO-11), respectively. The partial hydrogenation of the thiophene–Au/SAPO-11 and thiophene–Au₂/SAPO-11 complexes gives 2,5-dihydrothiophene (DHT), with a ΔH of ?23.0 and ?36.8 kcal/mol, respectively. 2-Butene production was found in both models with further hydrogenation. Likewise the direct butadiene elimination is achieved, but only with the separated Au dimer (ΔH = ?17.5 kcal/mol).     

Oxidative homo-coupling of potassium aryltrifluoroborates catalyzed by gold nanocluster under aerobic conditions

Gold(0) nanoclusters, stabilized by poly(N-vinyl-2-pyrrolidone) (Au:PVP-n), catalyzed the oxidative homo-coupling reaction of potassium aryltrifluoroborate in water under air. Catalytic activity was dependent on the size of clusters. The smallest cluster Au:PVP-1 (d_av = 1.3 ± 0.3 nm) gave the highest activity, while Au:PVP-7 (d_av = 9.5 ± 1.0 nm) did not catalyze the homo-coupling. The catalyst was reusable for several times. Positively charged surface on the Au cluster, generated by the adsorption of molecular oxygen, would be the active site of the catalysis.     

Syngas production from ethanol dry reforming over Rh/CeO2 catalyst

Carbon dioxide reforming of ethanol over Rh/CeO₂ catalyst was deeply investigated at different reaction temperatures of 450–700 °C and reactant ratios (CO₂/ethanol from 1 to 3) under atmospheric pressure. The obtained results indicated that Rh/CeO₂ catalyst presented a promising activity and stability for syngas production from renewable bio-ethanol instead of conventional methane. Typically, CO₂-rich conditions (CO₂/ethanol = 3) were favorable for reaction process and dynamic coke cleaning, which led to remarkably stable performance over 65 h on stream. The strong redox capacity of CeO₂ support might also accelerate CO₂ activation and prevent the carbon accumulation over the catalyst surface. Additionally, tunable H₂/CO ratios were available by changing the CO₂/ethanol ratios. The results from characterization of samples before and after catalytic tests allowed to establish the relationship between textural properties and catalytic performance.     

Spin crossover behavior in two-dimensional bimetallic coordination polymer FeII(3-bromo-4-picoline)2[AuI(CN)2]2: Synthesis,crystal structures,and magnetic properties

A new novel 2D network bimetallic Fe^IIAu^I spin crossover coordination compound based on 3-bromo-4-picoline and bridged cyano ligands, {Fe^II(3-bromo-4-picoline)₂[Au^I(CN)₂]₂}_n (1), has been synthesized and characterized by elemental analyses and IR, using single-crystal X-ray analysis at 293 K and at 90 K and magnetic measurements. The Fe^II ions in 1 have octahedral FeN₆ coordination geometries, which are linked by a [Au^I(CN)₂]^? unit at the equatorial plane to form a polymeric 2D sheet architecture. The two pyridine rings coordinate at the axial positions. The structure of 1 comprises parallel 2D arrays and the layers interact by pairs, defining bilayers with strong binuclear aurophilic Au?Au interactions. Furthermore, intermolecular Au?Br and Br?Br distances in 1 are significantly smaller than the sums of the van der Waals radii. Variable-temperature (2–300 K) magnetic susceptibility measurements of 1 have been performed to determine behaviors of spin transition. The susceptibility data of 1 indicates that about 50% of the HS states are changed to LS states at 75 K. The Fe–N bond distances at 90 K show that ratio of high spin states agree with the SQUID data.     

Nano Au enhanced upconversion in dichroic Nd3+:Au–antimony glass nanocomposites

Dichroic Nd³⁺:Au–antimony glass (K₂O–B₂O₃–Sb₂O₃) nanocomposites (NCs) have been synthesized by single-step melt-quench thermochemical reduction process. The UV–Vis–NIR spectra show surface plasmon resonance (SPR) band of Au⁰ nanoparticles (NPs) and absorption peaks of Nd³⁺ ions. XRD and SAED results indicate growth of Au⁰ NPs along (200) plane. TEM image reveals elliptical Au⁰ NPs having sizes 12–21 nm (aspect ratio ～1.2) responsible for the dichroic behavior. Photoluminescent upconversion under excitation at 805 nm exhibit two emission bands of Nd³⁺ ions at 540 (green) and 650 (red) nm due to ⁴G_7/2 → ⁴I_9/2 and ⁴G_7/2 → ⁴I_13/2 transitions respectively. Both bands undergo maximum 8 and 11 fold intensity enhancements respectively at 0.03 wt% Au⁰ (4.1 × 10¹⁸ atoms/cm³). Local field enhancement (LFE) induced by Au⁰ SPR and energy transfer (ET) from Au⁰ → Nd³⁺ is found to be responsible for enhancement while ET from Nd³⁺ → Au⁰ and optical re-absorption due to Au⁰ SPR for quenching.     

An oxidovanadium(IV) complex having a perrhenato ligand: An efficient catalyst for aerobic oxidation reactions of benzylic and propargylic alcohols

An oxidovanadium(IV) complex having a perrhenato ligand [VO(ReO₄)(4,4′-^tBubpy)₂][0.25SO₄·0.5ReO₄] (4,4′-^tBubpy = 4,4′-di-tert-butyl-2,2′-bipyridine) efficiently catalyzes not only dehydrogenative oxidation of benzylic and propargylic mono-alcohols but also oxidative CC bond cleavage of meso-1,2-diaryl-1,2-ethanediols under atmospheric molecular oxygen, affording the corresponding carbonyl compounds in good yield.     

Photocatalysis of Au25-modified TiO2 under visible and near infrared light

Visible light-driven photocatalysis of Au₂₅-modified TiO₂ was investigated. It induces oxidation of phenol derivates and ferrocyanide and reduction of Ag⁺, Cu²⁺ and dissolved oxygen. Thermodynamically uphill reactions such as oxidation of phenol accompanied by reduction of Cu²⁺ are also driven. The photocatalysis, which is based on the excitation of Au₂₅, is observed even under 860 nm light.     

A density functional theory study of gold clusters supported on layered double hydroxides

The geometrical structure and electronic properties of a series of Au _N (N = 1–8) clusters supported on a Mg²⁺, Al³⁺-containing layered double hydroxides (MgAl–LDH) are investigated using density functional theory. The Au clusters are supported on two typical crystal faces of the LDH platelet, the basal {0001} and the lateral $ \{ 10\,\bar{1}\,0\} $ crystal face, respectively, corresponding to the top and edge site of monolayer MgAl–LDH lamella for the sake of simplicity. It is revealed that an increase in the charge transfer from the LDH lamella to the Au _N clusters at the edge site rather than clusters on the top surface, demonstrating a preferential adsorption for Au _N clusters at the edge of LDH lamella. Moreover, the calculated adsorption energy of the Au _N clusters on the LDH lamella increases with the cluster size, irrespective of the adsorption site. The investigation on the interaction between O₂ and Au _N clusters on the LDH lamella is further carried out for understanding the catalytic oxidation properties of the LDH-supported Au catalyst. The formation of reactive O₂ ^? species, a necessary prerequisite in catalytic oxidation of CO, by O₂ bridging two Au atoms of Au _N clusters indicates that the LDH-supported Au catalyst has the required characteristics of a chemically active gold catalyst in CO oxidation.     

Bioelectrocatalytic formate oxidation and carbon dioxide reduction at high current density and low overpotential with tungsten-containing formate dehydrogenase and mediators

We show a great possibility of mediated enzymatic bioelectrocatalysis in the formate oxidation and the carbon dioxide (CO₂) reduction at high current densities and low overpotentials. Tungsten-containing formate dehydrogenase (FoDH1) from Methylobacterium extorquens AM1 was used as a catalyst and immobilized on a Ketjen Black-modified electrode. For the formate oxidation, a high limiting current density (j_lim) of ca. 24 mA cm^− 2 was realized with a half wave potential (E_1/2) of only 0.12 V more positive than the formal potential of the formate/CO₂ couple (E°′_CO2) at 30 °C in the presence of methyl viologen (MV^2 +) as a mediator, and j_lim reached ca. 145 mA cm^− 2 at 60 °C. Even when a viologen-functionalized polymer was co-immobilized with FoDH1 on the porous electrode, j_lim of ca. 30 mA cm^− 2 was attained at 60 °C with E_1/2 = E°′_CO2 + 0.13 V. On the other hand, the CO₂ reduction was also realized with j_lim ≈ 15 mA cm^− 2 and E_1/2 = E°′_CO2 − 0.04 V at pH 6.6 and 60 °C in the presence of MV^2 +.     

Quasi-reversible two-electron reduction of oxygen at gold electrodes modified with a self-assembled submonolayer of cysteine

The electrochemical reduction of molecular oxygen (O₂) has been performed at gold electrodes modified with a submonolayer of a self-assembly (sub-SAM/Au) of a thiol compound (typically cysteine (CYST)) in O₂-saturated 0.5 M KOH. At bare gold electrode O₂ reduction reaction proceeds irreversibly, while this reaction is totally hindered at gold electrodes with a compact structure of CYST over its surface. The partial reductive desorption of the compact CYST monolayer was achieved by controlling the potential of the CYST/Au electrode, leading to the formation of a submonolayer coverage of the thiol compound over the Au electrode surface (sub-SAM/Au), at which the CYST molecules selectively block the Au(1 0 0) and Au(1 1 0) fractions (the so-called rough domains) of the polycrystalline Au while the Au(1 1 1) component (the so-called smooth domains) remains bare (i.e., uncovered with CYST). This sub-SAM/Au electrode extraordinarily exhibits a quasi-reversible two-electron reduction of molecular oxygen (O₂) in alkaline medium with a peak separation (ΔE_p) between the cathodic and anodic peak potentials (E_p^c,E_p^a) of about 60 mV. The ratio of the anodic current to the cathodic one is close to unity. The formal potential (E^o′) of this reaction is found to equal −150 mV vs. Ag/AgCl/KCl(sat.).     

Coordination chemistry of gold(II) with amidinate,thiolate and ylide ligands

Various reagents such as Cl₂, Br₂, I₂, benzoyl peroxide and CH₃I add to the dinuclear gold(I) amidinate complex [Au₂(2,6-Me₂Ph-form)₂] to form oxidative-addition gold(II) metal–metal bonded complexes. The gold–gold distance in the dinuclear complex decreases upon oxidative-addition with halogens from 2.7 to 2.5 Å, similar to observations made with dithiolate and ylide ligands. The sodium salt of the guanidinate Hhpp ligand, Hhpp = 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidine reacts with (THT)AuCl in THF or CH₂Cl₂ to form a Au(II) complex, [Au₂(hpp)₂Cl₂], either by solvent oxidation or disproportionation of the Au(I) to Au(II) and the metal. Density functional theory (DFT) and MP2 calculations on [Au₂(hpp)₂Cl₂] find that the highest occupied molecular orbital (HOMO) is predominately hpp and chlorine-based with some Au–Au δ* character. The lowest unoccupied molecular orbital (LUMO) has metal-to-ligand (M–L) and metal-to-metal (M–M) σ* character (approximately 50% hpp/chlorine, and 50% gold). The charge-transfer character of the deeply colored solutions is observed in all the oxidative-addition products of the dinuclear gold(II) nitrogen ligands. This contrasts with the colors of the gold(II) ylide oxidative-addition products which are pale yellow. The colors of the crystalline gold(II) nitrogen complexes are dark orange to brown. This review will focus on the chemistry of gold(II) with nitrogen ligands and compare this with the well reviewed chemistry of gold(II) thiolate and ylide complexes.     

Synthesis,spectroscopic, structural and thermal characterizations of [(C7H6NO4)2TeBr6·4H2O]

Tellurium (IV) complexes with pyridine-2,6-dicarboxylate ligand were synthesized by slow evaporation from aqueous solutions yielding a new compound: [(C₇H₆NO₄)₂TeBr₆·4H₂O]. The structure of this compound was solved and refined by single-crystal X-ray diffraction. The compound is centrosymmetric P2₁/c (N°: 14) with the parameters a = 8.875(5) Å, b = 15.174(5) Å, c = 10.199(5) Å, β = 94.271° (5) and Z = 2. The structure consists of isolated H₂O, isolated [TeBr₆]^2? octahedral anions and (pyridine-2,6-dicarboxylate) [C₇H₆NO₄]⁺ cations. The stability of the structure was ensured by ionic and hydrogen bonding contacts (N–H?Br and O–H?Br) and Van-Der Walls interaction. The thermal decomposition of the compound was studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The FTIR and Raman spectroscopy at different temperatures confirm the existence of vibrational modes that correspond to the organic, inorganic and water molecular groups. Additionally, the UV–Vis diffuse reflectance spectrum was recorded in order to investigate the band gap nature. The measurements show that this compound exhibits a semiconducting behavior with an optical band gap of 2.66 eV.     

Partial oxidation of ethane to syngas in an oxygen-permeable membrane reactor

A perovskite-type oxide of Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3−δ (BSCFO) with mixed electronic and oxygen ionic conductivity at high temperatures was used as an oxygen-permeable membrane. A tubular membrane of BSCFO made by extrusion method has been used in the membrane reactor to exclusively transport oxygen for the partial oxidation of ethane (POE) to syngas with catalyst of LiLaNiO/γ-Al₂O₃ at temperatures of 800–900 °C. After only 30 min POE reaction in the membrane reactor, the oxygen permeation flux reached at 8.2 ml cm⁻² min⁻¹. After that, the oxygen permeation flux increased slowly and it took 12 h to reach at 11.0 ml cm⁻² min⁻¹. SEM and EDS analysis showed that Sr and Ba segregations occurred on the used membrane surface exposed to air while Co slightly enriched on the membrane surface exposed to ethane. The oxygen permeation flux increased with increasing of concentration of C₂H₆, which was attributed to increasing of the driving force resulting from the more reducing conditions produced with an increase of concentration of C₂H₆ in the feed gas. The tubular membrane reactor was successfully operated for POE reaction at 875 °C for more than 100 h without failure, with ethane conversion of ∼100%, CO selectivity of >91% and oxygen permeation fluxes of 10–11 ml cm⁻² min⁻¹.