Facile synthesis of mesophase pitch/exfoliated graphite nanoplatelets nanocomposite and its application as anode materials for lithium-ion batteries

Mesophase pitch (MP)/exfoliated graphite nanoplatelets (GNPs) nanocomposite has been prepared by an efficient method with an initiation of graphite intercalation compounds (GIC). X-ray diffraction, optical microscopy, high-resolution transmission electron microscopy and scanning electron microscopy analysis techniques are used to characterize the samples. It is observed that GIC has exfoliated completely into GNPs during the formation of MP/GNPs nanocomposite and the GNPs are distributed uniformly in MP matrix, which represent a conductive path for a movement of electrons throughout the composites. Electrochemical tests demonstrate that the carbonized MP/GNPs nanocomposite displays higher capacity and better cycle performance in comparison with the pure carbonized MP. It is concluded that such a large improvement of electrochemical performance within the nanocomposite may in general be related to the enhanced electronic conductivity, which is achieved by good dispersion of GNPs within MP matrix and formation of a 3D network of GNPs.     

Methods for enhancing the capacity of electrode materials in low-temperature lithium-ion batteries

Lithium-ion batteries(LIBs) have evolved into the mainstream power source of ene rgy sto rage equipment by reason of their advantages such as high energy density,high power,long cycle life and less pollution.With the expansion of their applications in deep-sea exploration,aerospace and military equipment,special working conditions have placed higher demands on the low-temperature performance of LIBs.However,at low temperatures,the severe polarization and inferior electrochemical activity of electrode materials cause the acute capacity fading upon cycling,which greatly hindered the further development of LIBs.In this review,we summarize the recent important progress of LIBs in low-temperature operations and introduce the key methods and the related action mechanisms for enhancing the capacity of the various cathode and anode materials.It aims to promote the development of high-performance electrode materials and broaden the application range of LIBs.     

Superior cycle performance of Sn@C/graphene nanocomposite as an anode material for lithium-ion batteries

A novel anode material for lithium-ion batteries, tin nanoparticles coated with carbon embedded in graphene (Sn@C/graphene), was fabricated by hydrothermal synthesis and subsequent annealing. The structure and morphology of the nanocomposite were characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The size of the Sn@C nanoparticles is about 50-200 nm. The reversible specific capacity of the nanocomposite is ∼662 mAh g⁻¹ at a specific current of 100 mA g⁻¹ after 100 cycles, even ∼417 mAh g⁻¹ at the high current of 1000 mA g⁻¹. These results indicate that Sn@C/graphene possesses superior cycle performance and high rate capability. The enhanced electrochemical performances can be ascribed to the characteristic structure of the nanocomposite with both of the graphene and carbon shells, which buffer the volume change of the metallic tin and prevent the detachment and agglomeration of pulverized tin.     

Reduced graphene oxide wrapped hollow molybdenum trioxide nanorod for high performance lithium-ion batteries

Reduced graphene oxide wrapped hollow molybdenum trioxide nanorods have been fabricated as a high performance anode material for lithium batteries.     

High reversible capacity and rate capability of ZnCo2O4/graphene nanocomposite anode for high performance lithium ion batteries

A facile and straightforward method was adopted to synthesize ZnCo₂O₄/graphene nanocomposite anode. In the first step, pure ZnCo₂O₄ nanoparticles were synthesized using urea-assisted auto-combustion synthesis followed by annealing at a low temperature of 400 °C. In the second step, in order to synthesize ZnCo₂O₄/graphene nanocomposite, the obtained pure ZnCo₂O₄ nanoparticles were milled with 10 wt% reduced graphene nanosheets using high energy spex mill for 30 s. The ZnCo₂O₄ nanoparticles, with particle sizes of 25–50 nm, were uniformly dispersed and anchored on the reduced graphene nanosheets. Compared with pure ZnCo₂O₄ nanoparticles anode, significant improvements in the electrochemical performance of the nanocomposite anode were obtained. The resulting nanocomposite delivered a reversible capacity of 1124.8 mAh g⁻¹ at 0.1 C after 90 cycles with 98% Coulombic efficiency and high rate capability of 515.9 mAh g⁻¹ at 4.5 C, thus exhibiting one of the best lithium storage properties among the reported ZnCo₂O₄ anodes. The significant enhancement of the electrochemical performance of the nanocomposite anode could be credited to the strong synergy between ZnCo₂O₄ and graphene nanosheets, which maintain excellent electronic contact and accommodate the large volume changes during the lithiation/delithiation process.     

3d-Transition metal doped spinels as high-voltage cathode materials for rechargeable lithium-ion batteries

Finding appropriate positive electrode materials for Li-ion batteries is the next big step for their application in emerging fields like stationary energy storage and electromobility. Among the potential materials 3d-transition metal doped spinels exhibit a high operating voltage and, therefore, are highly promising cathode materials which could meet the requirements regarding energy and power density to make Li-ion batteries the system of choice for the above mentioned applications. The compounds considered here include substituted Mn-based spinels such as LiM_0.5Mn_1.5O₄ (M = Ni, Co, Fe), LiCrMnO₄ and LiCrTiO₄. In this review, the recent researches conducted on these spinel materials are summarized. These include different routes of synthesis, structural studies, electrode preparation, electrochemical performance and mechanism of Li-extraction/insertion, thermal stability as well as degradation mechanisms. Note that even though the Ni-, Co-, and Fe-doped materials share the same chemical formula, the oxidation state distributions as well as the operating voltages are different among them. Furthermore, apart from the initial structural similarity, the Li-intercalation takes place through different mechanisms in different materials. In addition, this difference in mechanism is found to have considerable influence on the long-term cycling stability of the material. The routes to improve the electrochemical performance of some of the above candidates are discussed. Further emphasis is given to the parameters that limit their application in current technology, and strategies to overcome them are addressed.     

Novel composite anode materials for lithium ion batteries with low sensitivity towards humidity

Graphitic anode materials for lithium ion batteries processed under high humidity conditions show severe performance losses. The sensitivity of these materials towards humidity can be significantly reduced by adsorbing metal ions like silver or copper ions, with subsequent heat treatment of these composites. Results of X-ray photoelectron spectroscopy, high-resolution electron microscopy, thermogravimetry, and differential thermal analysis indicate that the deposited metals exist in metallic and carbide, M_xC (M=Cu or Ag), forms. They remove or cover (i.e. deactivate) active hydrophilic sites at the surface of the graphite. These composites absorb less water during processing. The electrochemical performance, including reversible capacity, coulombic efficiency in the first cycle, and cycling behavior, is markedly improved. This approach provides a potentially powerful method to manufacture lithium ion batteries under less demanding conditions.Presented at the 3rd International Meeting on Advanced Batteries and Accumulators, 16–20 June 2002, Brno, Czech Republic     

Effects of microwave irradiation on the electrochemical performance of manganese-based cathode materials for lithium-ion batteries

Microwave-assisted synthesis has continued to be adopted for the preparation of high-performance manganese-based cathode materials for lithium-ion batteries. The technique is fast, energy-efficient and has significant positive impacts on the general physico-chemical properties of the cathode materials: LiMn₂O₄, LiMn_1.5Ni_0.5O₄, and lithium nickel manganese cobalt oxides. Despite the advantages of microwave-assisted synthesis, this review reveals that the application is still limited. In our opinion, increased basic knowledge of the microwave process and availability of safe and reliable instrumentation could be a great opportunity for the commercial realization of low-cost and energy-dense Mn-based cathode materials for the next-generation lithium-ion batteries.     

Porous nanocomposite derived from Zn,Ni-bimetallic metal-organic framework as an anode material for lithium-ion batteries

A highly stable and Zn, Ni-bimetallic porous composite was synthesized via a one-step pyrolysis of a bimetal-organic framework as an efficient anode material for lithium-ion batteries. Remarkably the obtained composite shows 1105.2 mAh/g at a current density of 5000 mA/g after 400 cycles which makes it a promising candidate to improve the volumetric energy density.     

Co1−xFe2+xO4 (x = 0.1, 0.2) anode materials for rechargeable lithium-ion batteries

A cobalt-poor or iron rich bicomponent mixture of Co_0.9Fe_2.1O₄/Fe₂O₃ and Co_0.8Fe_2.2O₄/Fe₂O₃ anode materials have been successfully prepared using simple, cost-effective, and scalable urea-assisted auto-combustion synthesis. The threshold limit of lower cobalt stoichiometry in CoFe₂O₄ that leads to impressive electrochemical performance was identified. The electrochemical performance shows that the Co_0.9Fe_2.1O₄/Fe₂O₃ electrode exhibits high capacity and rate capability in comparison to a Co_0.8Fe_2.2O₄/Fe₂O₃ electrode, and the obtained data is comparable with that reported for cobalt-rich CoFe₂O₄. The better rate performance of the Co_0.9Fe_2.1O₄/Fe₂O₃ electrode is ascribed to its unique stoichiometry, which intimately prefers the combination of Fe₂O₃ with Co_1−xFe_2+xO₄ and the high electrical conductivity. Further, the high reversible capacity in Co_0.9Fe_2.1O₄/Fe₂O₃ and Co_0.8Fe_2.2O₄/Fe₂O₃ electrodes is most likely attributed to the synergistic electrochemical activity of both the nanostructured materials (Co_1−xFe_2+xO₄ and Fe₂O₃), reaching beyond the well-established mechanisms of charge storage in these two phases.     

Nanosized anatase titanium dioxide loaded porous carbon nanofiber webs as anode materials for lithium-ion batteries

Nanosized anatase titanium dioxide loaded porous carbon nanofibers (TiO₂/PCNFs) were prepared from electrospun TiO(OAc)₂/PAN/PMMA composite precursor fibers with different amount of PMMA porogen, which were sequentially heat-treated in different environments. Electrochemical measurement results show that these as-prepared TiO₂/PCNFs present higher cyclic reversible capacity than the TiO₂/CNFs counterpart (without PMMA porogen in its precursor fibers). Among the as-prepared TiO₂/PCNFs samples, the representative TiO₂/PCNFs (the mass ratio of PAN to PMMA is 3:1) exhibits the best high-rate performance with a high stable capacity retention about 200 mAhg^{− 1} at a current density as high as 800 mAg^{− 1}. This novel TiO₂/PCNFs composite material opens up a promising application in high-power lithium-ion batteries.     

In situ chemical synthesis of SnO2–graphene nanocomposite as anode materials for lithium-ion batteries

An in situ chemical synthesis approach has been developed to prepare SnO₂–graphene nanocomposite. Field emission scanning electron microscopy and transmission electron microscopy observation revealed the homogeneous distribution of SnO₂ nanoparticles (4–6 nm in size) on graphene matrix. The electrochemical reactivities of the SnO₂–graphene nanocomposite as anode material were measured by cyclic voltammetry and galvanostatic charge/discharge cycling. The as-synthesized SnO₂–graphene nanocomposite exhibited a reversible lithium storage capacity of 765 mAh/g in the first cycle and an enhanced cyclability, which can be ascribed to 3D architecture of the SnO₂–graphene nanocomposite.     

Scalable construction of SiO/wrinkled MXene composite by a simple electrostatic self-assembly strategy as anode for high-energy lithium-ion batteries

Available onlineSilicon monoxide(SiO) is a promising anode material fo r lithium-ion batteries(LIBs) due to its high theoretical specific capacity(～2400 mAh/g),low working potential(<0.5 V vs.Li⁺/Li),low cost,easy synthesis,nontoxicity,abundant natural source and smaller volume expansion than Si.However,low intrinsic electrical conductivity,low initial Coulombic efficiency(ICE) and inevitable volume expansion(～200%) impede its practical application.Here we fabricate SiO/wrinkled MX...     

Recent progress in lithium-ion and lithium metal batteries

Moving towards carbon-free energy and global commercialization of electric vehicles stimulated extensive development in the field of lithium-ion batteries (LIBs), and to date, many scientific and technological advances have been achieved. The number of research works devoted to developing high-capacity and stable materials for lithium- ion and lithium metal batteries (LMBs) is constantly rising. This review covers the main progress in the development of LIBs and LMBs based on research works published in 2021. One of the main goals in the recent publications is to solve the problem of instability of layered nickel-rich lithium– nickel–cobalt–manganese oxides (Ni-rich NMC) cathodes, as well as silicon anodes. Improving the stability of NMC cathodes can be achieved by doping them with cations as well as by coating the oxides’ surfaces with protective layers (organic polymers and inorganic materials). The most effective strategies for dampening volumetric changes in silicon anodes include using porous silicon structures, obtaining composites with carbon, coating silicon-containing particles with inorganic or polymeric materials, and replacing standard binder materials. Much work has been devoted to suppressing dendrite formation in LMBs by forming stable coating layers on the surface of lithium metal, preparing composite anodes and alloys, and changing the composition of electrolytes. At the same time, in the field of electrolyte development, many research works have been devoted to the search for new hybrid polymer electrolytes containing lithium-conducting inorganic materials.     

Porous Si/C composite as anode materials for high-performance rechargeable lithium-ion battery

A novel porous silicon was synthesized through a magnesiothermic reduction method of molecular sieve for the first time, the porous silicon was used as anode material, which shows a high initial specific capacity of 2018.5 mAh/g with current density of 0.1 A/g.     

Mechanochemical synthesis and electrochemical properties of nanostructured electrode materials for Li ion batteries

We focus on the synthesis by ball milling and on the electrochemical characterization of nanocrystalline bimetallic and composite materials to be employed as anodes in Li ion batteries. Ni₃Sn₄ and Ni₃Sn₂ based compounds were obtained by ball milling of three different Ni–Sn mixtures. The properties of the resulting anodes for Li ion batteries were evaluated as a function of composition. Moreover, a biphasic system is presented, with CoSn₂ and CoSn type structures, arising from the synthesis of the Sn₃₁Co₂₈C₄₁ composition. When cycled in a Li cell, this material showed a high reversible specific capacity, about 450 mA h g⁻¹, and a very good electrochemical and structural stability, making it of interest for application purposes. Contribution to the Fall Meeting of the European Materials Research Society, Symposium D: 9th International Symposium on Electrochemical–Chemical Reactivity of Metastable Materials, Warsaw, 17th–21st September, 2007.     

Facile fabrication of porous NiO films for lithium-ion batteries with high reversibility and rate capability

We report the high-rate capability and good cyclability of three-dimension nanoporous NiO films as the anodes of lithium-ion batteries. The NiO films are fabricated by immersing foam nickel substrates in an 80 °C aqueous solution containing ammonia and potassium peroxydisulfate, and subsequent heat treatment at 500 °C. At a rate of 1.0 C, the film electrodes maintain a capacity of 560 mAh g⁻¹ as well as capacity retention of 97% after 100 discharge/charge cycles. When the current density is increased to 14C, 42% of the capacity can be retained. Owing to the ease of large-scale fabrication and superior electrochemical performance, these NiO films will be promising anodes for high-energy-density lithium-ion batteries.     

Ammonia leaching mechanism and kinetics of LiCoO2 material from spent lithium-ion batteries

In this paper, the ammonia leaching process and high-energy ball milling method were adapted to recover spent LiCoO₂ material. The ammonia reduction leaching mechanism of LiCoO₂ material in the ammonia-sodium sulfite-ammonium chloride system was elucidated. Compared with untreated LiCoO₂ material, the leaching equilibrium time of LiCoO₂ after ball-milled for 5 h was reduced from 48 h to 4 h, and the leaching efficiency of lithium and cobalt was improved from 69.86% and 70.80% to 89.86% and 98.22%, respectively. Importantly, the apparent activation energy and leaching kinetic equation of the reaction was calculated by the shrinking core reaction model, indicating that the reaction was controlled by the chemical reaction.     

Interconnected sandwich structure carbon/Si-SiO2/carbon nanospheres composite as high performance anode material for lithium-ion batteries

In the present work,an interconnected sandwich carbon/Si-SiO2/carbon nanospheres composite was prepared by template method and carbon thermal vapor deposition（TVD）.The carbon conductive layer can not only efficiently improve the electronic conductivity of Si-based anode,but also play a key role in alleviating the negative effect from huge volume expansion over discharge/charge of Si-based anode.The resulting material delivered a reversible capacity of 1094 mAh/g,and exhibited excellent cycling stability.It kept a reversible capacity of 1050 mAh/g over 200 cycles with a capacity retention of 96%.     

Mesoporous Fe2O3 nanoparticles as high performance anode materials for lithium-ion batteries

This work introduces an effective, inexpensive, and large-scale production approach to the synthesis of Fe₂O₃ nanoparticles with a favorable configuration that 5 nm iron oxide domains in diameter assembled into a mesoporous network. The phase structure, morphology, and pore nature were characterized systematically. When used as anode materials for lithium-ion batteries, the mesoporous Fe₂O₃ nanoparticles exhibit excellent cycling performance (1009 mA h g^− 1 at 100 mA g^− 1 up to 230 cycles) and rate capability (reversible charging capacity of 420 mA h g^− 1 at 1000 mA g^− 1 during 230 cycles). This research suggests that the mesoporous Fe₂O₃ nanoparticles could be suitable as a high rate performance anode material for lithium-ion batteries.