Mesoporous tubular graphene electrode for high performance supercapacitor

Mesopores tubular graphene, synthesized by template method, have unique bi-directional ions transfer channel in unstack graphene layers and high mesopore ratio, exhibiting excellent capacitance performance in the EDLC using ionic liquid electrolyte at 4 V.     

Mesoporous carbon material as cathode for high performance lithium-ion capacitor

The mesoporous carbon material with large pore volume and high surface area by a simple situ MgO template method is synthesized, which is utilized as cathode to assemble a high performance lithium ion capacitor.     

Laser processed micro-supercapacitors based on carbon nanotubes/manganese dioxide nanosheets composite with excellent electrochemical performance and aesthetic property

A laser processed micro-supercapacitor (LPMS) based on carbon nanotubes/manganese dioxide composite is fabricated through slurry dispensing and laser scribing techniques. This device presents superior electrochemical performance and aesthetic property.     

Ordered mesoporous silicon carbide-derived carbon for high-power supercapacitors

Micro/mesoporous carbon was prepared by chlorination of ordered mesoporous silicon carbide derived from magnesio-thermal reduction of templated carbon-silica precursors. These materials were then used as active materials for electrochemical capacitors and characterized in 1.5 M NEt₄BF₄/AN. The electrodes showed outstanding rate capability (90% of capacity retention at 1 V/s and time constant of 1 s) with high specific areal capacitance (0.5 F/cm² of electrode), that makes such hierarchical porous carbons promising for high power and energy density supercapacitors.     

Polyimide-derived carbon nanofiber membranes as anodes for high-performance flexible lithium ion batteries

Heteroatoms-doped carbon nanofiber membranes with flexible features were prepared by electrospinning with heterocyclic polyimide (PI) structures containing biphenyl and pyrimidine rings. The products with optimized treatment could achieve 695 mAh/g at 0.1 A/g and retain 245 mAh/g at 1.5 A/g after 300 cycles when used as anode for Li-ion batteries.     

Preparation of activated carbon from Turbinaria turbinata seaweeds and its use as supercapacitor electrode materials

Turbinaria turbinata brown seaweeds were tested as carbon electrode material in symmetric, electrochemical supercapacitors. The electrochemical properties of the carbon materials were characterised for their application as supercapacitors using cyclic voltammetry, galvanostatic charge/discharge method and electrochemical impedance spectroscopic analyses. Our initial results showed that the optimal behaviour was obtained for the sample prepared by pyrolysis at 800 °C. The average surface area of the carbon was 812 m²/g. Electrochemical tests with an organic electrolyte gave the following interesting results: a capacitance of 74.5 F/g, a specific series resistance of 0.5 Ω cm² and an ionic resistivity of 1.3 Ω cm². These results show the promising capacitive properties of carbon derived from seaweeds and their application in electrochemical supercapacitors.     

Paper-based all-solid-state flexible asymmetric micro-supercapacitors fabricated by a simple pencil drawing methodology

A simple and novel methodology was developed for manufacturing interdigitated asymmetric all-solid-state flexible micro-supercapacitors (MSCs) by a facile pencil drawing process followed by electrodepositing MnO₂ on one of the as-drawn graphite electrode as anode and the other as cathode.     

Vertical crosslinking MoS2/three-dimensional graphene composite towards high performance supercapacitor

The vertical crosslinking MoS₂/three-dimensional graphene composite has been prepared by hydrothermal method, which delivered a superior and stable electrochemical capacitive performance.     

Flexible asymmetric supercapacitor based on MnO2 honeycomb structure

By controlling the electroplating time of solution containing Mn(Ac)₂, the MnO₂ nanosheets were self-assembled to the honeycomb structure and showed an excellent electrochemical performance in 1 mol/L Na₂SO₄ electrolyte. Via pairing with activated carbon as negative electrode, the capacitor could deliver a maximum energy density of 43.84 Wh/kg and a maximum power density of 6.62 kW/kg.     

Metallic impurity free carbon nanotube paste electrodes

Electrodes modified with carbon nanomaterials find wide ranging applications in electrochemistry such as in energy generation and storage through to applications in electroanalysis. A substantial limitation is the presence of metallic impurities which vary between batches and can produce erroneous results. Consequently we have explored the electrochemical properties of metallic impurity free carbon nanotube paste electrodes using potassium ferrocyanide and hydrogen peroxide as model compounds. In terms of the latter utilising cyclic voltammetry, a linear range from 0.75 to 3 mM with a limit of detection of 0.19 mM is possible using the electrochemical oxidation of hydrogen peroxide while using the electrochemical reduction of the target analyte, a linear range from 0.5 to 249 mM is possible with a detection limit of 0.43 mM.The ultra-small size of the carbon nanotubes and fabrication methodology result in a tightly bound carbon nanotube electrode surface which does not exhibit thin-layer behaviour resulting in highly reproducible electrodes with the %RSD found to be 5.5%. These analytical ranges, detection limits and reproducibility are technologically useful.The carbon nanotubes utilised are completely free from metallic impurities and do not require lengthy processing to remove impurities and consequently have no variation in the purity of the nanomaterial between batches as is commonly the case for other available carbon nanotube material. The impurity free nature of this nanomaterial allows for highly reproducible and intelligent sensors based on carbon nanotubes to be understood and realised for the first time.     

Low-cost,porous carbon current collector with high sulfur loading for lithium–sulfur batteries

Li–S batteries with a porous carbon current collector (PCCC), high sulfur loading (2.3 mg cm^− 2, equal to 80 wt.% sulfur content), high capacity, and long cycle life have been fabricated with a simple one-step paste absorption method. The intimate contact between the insulating sulfur and the embedded conductive matrix allows high active material loading. The high absorptivity of electrolyte by the PCCC facilitates efficient retention of soluble polysulfides within the PCCC, so the 3D cathode architecture stabilizes the electrochemical reaction within the porous space.     

Nanostructured NiMoO4 as active electrocatalyst for oxygen evolution

Hydrothermally synthesized NiMoO₄ nanorods exhibit considerable electrocatalytic properties for the oxygen evolution in alkaline condition. The performance enhancement of ternary NiMoO₄ over binary oxide NiO and MoO₃ is attributed to the inclusion of Mo that promotes the pre-redox reaction of Ni to form active Ni species.     

Synthesis of nickel selenide thin films for high performance all-solid-state asymmetric supercapacitors

As a significant semiconductor, nickel selenide shows enormous potential and extensive application prospects in the field of sensor, photocatalysis and supercapacitor. In this paper, nickel selenide (Ni₃Se₂, NiSe) thin films were successfully fabricated on stainless-steel sheet using a facile, effective electrodeposition technique. The morphologies, microstructures and chemical compositions of the thin films are characterized systematically. Electrochemical tests exhibit that the Ni₃Se₂ and NiSe possess high specific capacitance of 581.1 F/g and 1644.7 F/g, respectively. A flexible, all-solid-state asymmetric supercapacitor is assembled by utilizing NiSe film as positive electrode and activated carbon as negative electrode. The solid device delivers a high areal capacitance of 27.0 mF/cm² at the current density of 0.7 mA/cm². The maximum volumetric energy density and power density of the NiSe//AC asymmetric SCs can achieve 0.26 mWh/cm³ and 33.35 mW/cm³, respectively. The device shows robust cycling stability with 84.6% capacitance retention after 10,000 cycles, outstanding flexibility and satisfactory mechanical stability. Moreover, two devices in series can light up a red light-emitting diode, which displayed great potential applications for energy storage.     

Ultrafine molybdenum carbide nanoparticles supported on nitrogen doped carbon nanosheets for hydrogen evolution reaction

Nitrogen doped carbon nanosheets supported molybdenum carbides nanoparticles (Mo_xC/NCS) have been synthesized by tuning the mass ratio of melamine and ammonia molybdate. The Mo₂C/NCS-10 exhibits superior electrocatalytic performance and stability for HER, which was attributed to N-doped carbon nanosheets, small particle size, mesoporous structure, and large electrochemical active surface area.     

A non-aqueous Li/organosulfur semi-solid flow battery

A non-aqueous Li/organosulfur semi-solid flow battery is constructed. The battery with a high cell voltage of 3.36 V achieves coulombic efficiency of 99%, voltage efficiency of 73% and energy efficiency of 72% at the current density of 5 mA/cm².     

Boron and nitrogen dual-doped carbon as a novel cathode for high performance hybrid ion capacitors

A high performance hybrid ion capacitors has been developed by using B, N dual-doped 3D superstructure carbon cathode and prelithiated graphite anode.     

Co1-xS embedded in porous carbon derived from metal organic framework as a highly efficient electrocatalyst for oxygen evolution reaction

Here, we report a two-step conversion method to fabricate a composite of Co_1-xS embedded in porous carbon framework (Co_1-xS@C) derived from metal organic frameworks (MOFs). The as-prepared porous dodecahedron Co_1-xS@C composite catalyst exhibits excellent electrocatalytic performance towards oxygen evolution reaction (OER).     

Hydrogen bubble dynamic template synthesis of porous gold for nonenzymatic electrochemical detection of glucose

Gold (Au) films with open interconnected macroporous walls and nanoparticles have been successfully sculptured using the hydrogen bubble dynamic template synthesis followed by a galvanic replacement reaction. Copper (Cu) films with open interconnected macroporous walls and nanoparticles were synthesized using the electrochemically generated hydrogen bubbles as a dynamic template. Then through a galvanic replacement reaction between the porous Cu sacrificial templates and KAu(CN)₂ in solution, the porous Cu films were converted to porous Au films with the similar morphologies. Additional electrochemical dealloying process was introduced to remove the remaining Cu from the porous Au films. X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), Energy-dispersive X-ray (EDX), X-ray diffraction (XRD) and electrochemical methods were adopted to characterize the porous Au films. The resulted porous Au films show excellent catalytic activity toward the electrooxidation of glucose. A nonenzymatic glucose sensor based on those Au film electrodes shows a linear range from 2 to 10 mM with a sensitivity of 11.8 μA cm⁻² mM⁻¹, and a detection limit of 5 μM.     

Protection of Li metal anode by surface-coating of PVDF thin film to enhance the cycling performance of Li batteries

The PVDF thin film on the surface of the lithium metal can highly suppress the lithium dendrites.     

Electrochemical characterization on cobalt sulfide for electrochemical supercapacitors

High capacitance at a high charge–discharge current density of 50 mA/cm² for a new type of electrochemical supercapacitor cobalt sulfide (CoS_x) have been studied for the first time. The CoS_x was prepared by a very simply chemical precipitation method. The electrochemical capacitance performance of this compound was investigated by cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic charge–discharge tests with a three-electrode system. The results show that CoS_x has excellent electrochemical capacitive characteristic with potential range −0.3 ∼ 0.35 V (versus SCE) in 6 M KOH solution. Charge–discharge behaviors have been observed with the highest specific capacitance values of 475 F/g at the current density of 5 mA/cm², even at the high current density of 50 mA/cm², CoS_x also shows the high specific capacitance values of 369 F/g.