Assembling of a novel 3D Ag(I)-MOFs with mixed ligands tactics: Syntheses,crystal structure and catalytic degradation of nitrophenol

A novel 3D Ag(I)-MOFs, [Ag₂(H₃ddcba)(dpp)₂] (1), which features pcu (4¹²·6³) topology were successfully synthesized. Complex 1 exhibits predominant catalytic activity towards the degradation of o-nitrophenol (2-NP), m-nitrophenol (3-NP) and p-nitrophenol (4-NP) in aqueous solution.     

Synthesis and properties of novel heat-resistant fluorescent conjugated polymers with bisindolylmaleimide

Novel conjugated polymers with bisindolymaleimide were synthesized via simple metal-free condensation polymerization. The polymers exhibited high glass transition temperatures and decomposition temperatures with considerable luminescent properties.     

Non-enzymatic detection of hydrogen peroxide using a functionalized three-dimensional graphene electrode

A novel three-dimensional (3D) electrochemical sensor was developed for highly sensitive detection of hydrogen peroxide (H₂O₂). Monolithic and macroporous graphene foam grown by chemical vapor deposition (CVD) served as the electrode scaffold. Using in-situ polymerized polydopamine as the linker, the 3D electrode was functionalized with thionine molecules which can efficiently mediate the reduction of H₂O₂ at close proximity to the electrode surface. Such stable non-enzymatic sensor is able to detect H₂O₂ with a wide linear range (0.4 to 660 μM), high sensitivity (169.7 μA mM^− 1), low detection limit (80 nM), and fast response (reaching 95% of the steady current within 3 s). Furthermore, this sensor was used for real-time detection of dynamic release of H₂O₂ from live cancer cells in response to a pro-inflammatory stimulant.     

Enhanced electrochemiluminescence based on Ru(bpy)32+-doped silica nanoparticles and graphene composite for analysis of melamine in milk

A sensitive electrochemiluminescence (ECL) sensor for melamine analysis was fabricated based on Ru(bpy)₃²⁺-doped silica (Ru(bpy)₃²⁺@SiO₂) nanoparticles and graphene composite. Spherical Ru(bpy)₃²⁺@SiO₂ nanoparticles with uniform size about 55 nm were prepared by the reverse microemulsion method. Since per Ru(bpy)₃²⁺@SiO₂ nanoparticle encapsulated a great deal of Ru(bpy)₃²⁺, the ECL intensity has been greatly enhanced, which resulted in high sensitivity. Due to its extraordinary electric conductivity, graphene improved the conductivity and accelerated the electron transfer rate. In addition, graphene could work as electronic channel improving the efficient luminophor amount participating in the ECL reaction, which further enhanced the ECL signal. This proposed sensor was used to melamine analysis and the ECL intensity was proportional to logarithmic melamine concentration range from 1 × 10⁻¹³ M to 1 × 10⁻⁸ M with the detect limit as low as 1 × 10⁻¹³ M. In application to detect melamine in milk, satisfactory recoveries could be obtained, which indicated this sensor having potential application in melamine analysis in real samples.     

Direct electrochemistry of myoglobin based on DNA accumulation on carbon ionic liquid electrode

Poly-anionic deoxyribonucleic acid (DNA) was accumulated on the positively charged surface of carbon ionic liquid electrode (CILE) with N-butylpyridinium hexafluorophosphate (BPPF₆) as binder, and then myoglobin (Mb) was immobilized onto the DNA film by electrostatic interaction to form Mb/DNA/CILE electrode. The direct electrochemistry of Mb was then investigated in detail. A pair of well-defined, quasi-reversible cyclic voltammetric peaks of Mb was obtained with the formal potentials (E⁰′) at ?0.304 V (vs. SCE) in phosphate buffer solution (PBS, pH 7.0). The Mb/DNA/CILE electrode showed excellent electrocatalytic activity to H₂O₂ and trichloroacetic acid (TCA) in the range of 1.0–160 μmol/L and 0.5–40.0 mmol/L, respectively. The apparent Michaelis–Menten constants (K_M) toward H₂O₂ and TCA were calculated as 0.42 and 0.82 mmol/L. So, the DNA/CILE had potential to study other proteins.     

Novel 2,5-disubstituted-1,3,4-oxadiazole derivatives induce apoptosis in HepG2 cells through p53 mediated intrinsic pathway

A series of novel 1,3,4-oxadiazole derivatives (OSD, OCOD, ONOD, OPD, COD, PMOD, and PCOD) were synthesized and characterized. Their structures were confirmed on the basis of IR, NMR and mass spectroscopy and molecular weights were found in the range 300–325 g/mol. Cancerous cell lines (MCF-7, HepG2) and non-cancerous cell lines (Chang liver cells) were treated with these compounds for 48 h, which caused dose dependent decrease in the cell viability. From the seven derivatives, OSD was found to be most potent with IC₅₀ value close to 50 μM on all tested cell lines. Hence, this compound was selected for mechanistic study on HepG2 cell lines. Fluorescent cell staining and DNA fragmentation study of 50 μM OSD on HepG2 cells, showed events marked by apoptosis such as nuclear fragmentation, cytoplasm shrinkage and DNA damage. Further, the cells with same treatment were quantified for apoptosis using annexin V-PI flow cytometric technique. The percentage of apoptotic cells was significantly higher (p < 0.05) after OSD treatment compared to control cells. OSD induced a significant increase (p < 0.05) in the expression of the tumor suppressor p53 in HepG2 cells. The constitutive expression of anti-apoptotic protein Bcl-2 significantly decreased (p < 0.05) after treatment, while the expression of proapoptotic protein Bax significantly increased (p < 0.05). The change in Bax to Bcl-2 ratio suggested involvement of Bcl-2 family in induction of apoptosis. Furthermore, the levels of caspase-9 and caspase-3 were significantly (p < 0.05) up regulated in HepG2 cells after OSD treatment. The data suggest that 1,3,4-oxadiazole derivatives induce apoptosis mediated by intrinsic pathway of apoptosis. The findings strengthen the potential of the 1,3,4-oxadiazole scaffold OSD, as an agent with chemotherapeutic and cytostatic activity in human hepatocellular carcinoma in vitro.     

Electrochemical behaviors of nicotine and its interaction with DNA

The studies of the interaction between nicotine and DNA on the solid electrode were proposed for the first time. The electrochemical behaviors of nicotine and its interaction with DNA were explored by differential pulse voltammetry (DPV) at the DNA modified glassy carbon electrode (DNA/GCE). In 0.05 M Na₂C₂O₄ (pH 4.24), nicotine at DNA/GCE showed an irreversible reductive behavior in the range of ?1.6 to ?1.1 V. The presence of DNA led to the decrease in the peak current of nicotine and the negative shift in the potential, indicating that nicotine could interact with DNA by electrostatic mode. The binding ratio between nicotine and DNA was calculated to be 2:1 and the binding constant was 8.31(±0.36) × 10². The interaction between nicotine and DNA could be further verified by UV–vis spectroscopy.     

Novel strategy of constructing fluorescent probe for MAO-B via cascade reaction and its application in imaging MAO-B in human astrocyte

A novel strategy was developed to detect MAO-B and image MAO-B in human astrocyte by constructing coumarin via cascade reaction and intramolecular cyclization.     

Nanospace geometry-sensitive molecular assembly

Interaction of a molecule with micropore walls strongly depends on the micropore width. Molecules confined in the micropore tend to form an intermolecular structure inherent to each molecule/pore system in order to lower the whole molecular energy. Supercritical NO is adsorbed in micropores of zolite or activated carbon fiber in the form of a dimer at 303 K. The NO dimerization varies with the micropore width. CCl₄ molecules only in pore of pore width =1.0 nm at 303 K form a plastic crystalline structure which is observed at 246–250 K in the bulk phase. H₂O molecules are associated with each other to form an ordered assembly in carbon micropores at 303 K; the smaller the pore width, the more ordered the assembly structure. The presence of preadsorbed H₂O noticeably enhances adsorption of supercritical CH₄ in carbon micropores at 303 K due to methane nanohydrate formation, which has an optimum pore width of 1 nm.     

Demetallation of methemoglobin in cellulose nanofibril–TiO2 nanoparticle composite membrane electrodes

Porous composite films containing cellulose nanofibrils (from sisal) and TiO₂ nanoparticles (ca. 6 nm diameter) are obtained in a layer-by-layer assembly process. Each layer consists of ca. 0.18 μg cellulose nanofibrils and ca. 0.72 μg TiO₂ (determined by QCMB) and adds a thickness of ca. 16 nm (by AFM) to the uniform deposit. The TiO₂ nanophase is creating conducting pathways for electrons in a relatively open cellulose structure (ca. 82% open pores) potentially suitable for the immobilization of large redox proteins such as methemoglobin.Methemoglobin is shown to readily adsorb into the cellulose–TiO₂ film. However, electrochemical responses for the immobilized methemoglobin in aqueous 0.1 M phosphate buffer at pH 5.5 suggest that facile demetallation occurs. Experiments with Fe³⁺ in the absence of protein result in voltammetric responses indistinguishable from those observed for immobilized methemoglobin. In the presence of ethylenediamine tetraacetic acid (EDTA) the voltammetric signals for the Fe³⁺ immediately disappear. Complementary experiments conducted in 0.1 M acetate buffer at pH 5.5 demonstrate that methemoglobin can indeed be immobilized in electrochemically active form and without demetallation loss of the voltammetric signal in the presence of EDTA. Demetallation appears to occur (i) in the presence of phosphate, (ii) at pH 5.5, (iii) and in the presence of a charged surface.     

Palladium(II) complex taken as a model of an antitumour agent: Synthesis and equilibrium investigation involving biologically relevant ligands

Pd(DHP)Cl₂ and Pd(DHP)(CBDCA) complexes (DHP = 1,3-diamino-2-hydroxopropane and CBDCA = 1,1-cyclobutanedicarboxylate), were synthesized and characterized by elemental analysis, IR and NMR spectral measurements. The coordination of [Pd(DHP)(H₂O)₂]²⁺ with some selected bio-relevant ligands, containing different functional groups was investigated. The ligands used are amino acids, peptides, DNA constituents and dicarboxylic acids. Stoichiometry and stability constants of the complexes formed are reported at 25 °C and 0.1 M ionic strength. The results show the formation of 1:1 complexes with amino acids and dicarboxylic acids. DNA constituents form 1:1 and 1:2 complexes. Peptides form both 1:1 complexes and the corresponding deprotonated amide species. The effect of chloride ion concentration and dioxane on the acid dissociation constants of 1,1-cyclobutane dicarboxylic acid (CBDCAH₂) and the formation constant of its complex with Pd(DHP)²⁺ was reported. The equilibrium constants for the displacement of coordinated ligands as uracil, glycine or methionine by cysteine are calculated. The results are expected to contribute to the chemistry of antitumour agents.     

Fluorescence and DNA-binding spectral studies of neodymium(III) complex containing 2,2′-bipyridine, [Nd(bpy)2Cl3·OH2]

The interaction of [Nd(bpy)₂Cl₃·OH₂], where bipy is 2,2′-bipyridine, with DNA has been studied by absorption, emission, and viscosity measurements. [Nd(bpy)₂Cl₃·OH₂] showed absorption decreasing in charge transfer band with increasing of DNA. The binding constant, K_b has been determined by absorption measurement and found to be (1.5 ± 0.1) × 10⁵ M^?1. The fluorescent of [Nd(bpy)₂Cl₃·OH₂] has been investigated in detail. The interaction was also studied by fluorescence quenching technique. The results of fluorescence titration revealed that DNA had the strong ability to quenching the intrinsic fluorescence of Nd(III) complex at 327 nm. The binding site number n, apparent binding constant K_b and the Stern–Volmer quenching constant K_SV have been determined. Thermodynamic parameters have been calculated according to relevant fluorescent data and Van’t Hoff equation. Characterization of bonding mode has been studied. The results suggested that the major interaction mode between [Nd(bpy)₂Cl₃·OH₂] and DNA was groove binding.     

Electrospun zirconia-embedded carbon nanofibre for high-sensitive determination of methyl parathion

Carbon nanofibers embedded with ultrafine zirconia nanoparticles (ZrO₂-CNFs) are fabricated via a new methodology. Polyvinylpyrrolidone (PVP) and polymethylmethacrylate (PMMA) binary polymers containing zirconium n-butoxide are first dissolved in dimethylformamide, and the resulting solution is electrospun and heat-treated. The tetragonal zirconia nanoparticles formed, with a size of 5 ± 2 nm in diameter, are uniformly distributed in the carbon nanofibres. Using Nafion as an additive, ZrO₂-CNFs are drop-cast onto the glassy carbon electrode (ZrO₂-CNF/GCE) and the modified electrode is then applied to detect methyl parathion (MP) using differential pulse voltammetry. Two linear relationships are found at the concentration ranges of 1 × 10^− 9–2 × 10^− 8 g/L and 2 × 10^− 8–2 × 10^− 7 g/L, with a detection limit of 3.4 × 10^− 10 g/L (S/N > 3). The electrospun-based ZrO₂-CNF is a very promising coating material for electrochemical sensing of organophosphorus compounds.     

Ferrocene-modified Fe3O4@SiO2 magnetic nanoparticles as building blocks for construction of reagentless enzyme-based biosensors

A novel amperometric glucose biosensor was developed by entrapping glucose oxidase (GOD) in chitosan (CS) composite doped with ferrocene monocarboxylic acid-modified magnetic core-shell Fe₃O₄@SiO₂ nanoparticles (FMC-AFSNPs). It is shown that the obtained magnetic bio-nanoparticles attached to the surface of a carbon paste electrode (CPE) with the employment of a permanent magnet showed excellent electrochemical characteristics and at the same time acted as mediator to transfer electrons between the enzyme and the electrode. Under optimal conditions, this biosensor was able to detect glucose in the linear range from 1.0 × 10⁻⁵ to 4.0 × 10⁻³ M with a detection limit of 3.2 μM (S/N = 3). This immobilization approach effectively improved the stability of the electron transfer mediator and is promising for construction of biosensor and bioelectronic devices.     

Thermodynamic study of the system (LiCl + CaCl2 + H2O)

Solubility isotherms of the ternary system (LiCl + CaCl₂ + H₂O) were elaborately determined at T = (283.15 and 323.15) K. Several thermodynamic models were applied to represent the thermodynamic properties of this system. By comparing the predicted and experimental water activities in the ternary system, an empirical modified BET model was selected to represent the thermodynamic properties of this system. The solubility data determined in this work at T = (283.15 and 323.15) K, as well as those from the literature at other temperatures, were used for the model parameterization. A complete phase diagram of the ternary system was predicted over the temperature range from (273.15 to 323.15) K. Subsequently, the Gibbs free energy of formation of the solid phases CaCl₂ · 4 H₂O_(s), CaCl₂ · 2 H₂O_(s), LiCl · 2H₂O_(s), and LiCl · CaCl₂ · 5H₂O_(s) was estimated and compared with the literature data.     

Sensing characteristics of aged zirconia-based hydrogen sensor utilizing Zn–Ta-based oxide sensing-electrode

We report here the enhanced sensing characteristics to H₂ for a potentiometric sensor using an yttria-stabilized zirconia (YSZ) solid electrolyte and a ZnO(+ 84 wt.% Ta₂O₅) sensing electrode (SE) after aging at 500 °C. The emf response toward 400 ppm H₂ was found to gradually increase up to − 800 mV after 40 days operation (aging) and was stabilized at this value until the 90th day. The aged and stabilized sensor exhibited highly sensitive response to H₂, with minor responses toward other examined gases such as NOx and HCs. The 90% response time toward 100 ppm H₂ was approximately 70 s. The H₂ sensitivity of the stabilized sensor was hardly affected by changes in water vapor as well as O₂ concentration, with repeatable and reproducible responses to H₂.     

Thermodynamic evaluation and optimization of the (NaCl + KCl + MgCl2 + CaCl2 + MnCl2 + FeCl2 + CoCl2 + NiCl2) system

A complete critical evaluation of all available phase diagram and thermodynamic data has been performed for all condensed phases of the (NaCl + KCl + MgCl₂ + CaCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) system, and optimized model parameters have been found. The (MgCl₂ + CaCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) subsystem has been critically evaluated in a previous article. The model parameters obtained for the binary subsystems can be used to predict thermodynamic properties and phase equilibria for the multicomponent system. The Modified Quasichemical Model was used for the molten salt phase, and the (MgCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) solid solution was modeled using a cationic substitutional model with an ideal entropy and an excess Gibbs free energy expressed as a polynomial in the component mole fractions. Finally, the (Na,K)(Mg,Ca,Mn,Fe,Co,Ni)Cl₃ and the (Na,K)₂(Mg,Mn,Fe,Co,Ni)Cl₄ solid solutions were modeled using the Compound Energy Formalism.     

Thermodynamic evaluation and optimization of the (MgCl2 + CaCl2 + MnCl2 + FeCl2 + CoCl2 + NiCl2) system

A complete critical evaluation of all available phase diagram and thermodynamic data has been performed for all condensed phases of the (MgCl₂ + CaCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) system, and optimized model parameters have been found. The model parameters obtained for the binary subsystems can be used to predict thermodynamic properties and phase equilibria for the multicomponent system. The Modified Quasichemical Model was used for the molten salt phase, and the (MgCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) solid solution was modeled using a cationic substitutional model with an ideal entropy and an excess Gibbs free energy expressed as a polynomial in the component mole fractions. This is the first of two articles on the optimization of the (NaCl + KCl + MgCl₂ + CaCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) system.     

High performance cathode-supported SOFC with perovskite anode operating in weakly humidified hydrogen and methane

A high performance cathode-supported solid oxide fuel cell (SOFC), suitable for operating in weakly humidified hydrogen and methane, has been developed. The SOFC is essentially made up by a YSZ/LSM composite supporting cathode, a thin YSZ film electrolyte, and a GDC-impregnated La_0.75Sr_0.25Cr_0.5Mn_0.5O₃ (LSCM) anode. A gas tight thin YSZ film (∼27 μm) was formed during the co-sintering of cathode/electrolyte bi-layer at 1200 °C. The cathode-supported SOFC developed in this study showed encouraging performance with maximum power density of 0.182, 0.419, 0.628 and 0.818 W cm⁻² in air/3% H₂O–97% H₂ (and 0.06, 0.158, 0.221 and 0.352 W cm⁻² in air/3% H₂O–97% CH₄) at 750, 800, 850 and 900 °C, respectively. Such performance is close to that of the cathode-supported cell (0.42 W cm⁻² vs. 0.455 W cm⁻² in humidified H₂ at 800 °C) developed by Yamahara et al. [Solid State Ionics 176 (2005) 451–456] with a Co-infiltrated supporting LSM-YSZ cathode, a (Sc₂O₃)_0.1(Y₂O₃)_0.01(ZrO₂)_0.89 (SYSZ) electrolyte of 15 μm in thickness and a SYSZ/Ni anode, indicating that the performance of the GDC-impregnated LSCM anode is comparable to that made of Ni cermet while stable in weakly humidified methane fuel.     

Quantum dot-based electrochemical DNA biosensor using a screen-printed graphite surface with embedded bismuth precursor

This work reports the development of screen-printed quantum dots (QDs)-based DNA biosensors utilizing graphite electrodes with embedded bismuth citrate as a bismuth precursor. The sensor surface serves both as a support for the immobilization of the oligonucleotide and as an ultrasensitive voltammetric QDs transducer relying on bismuth nanoparticles. The utility of this biosensor is demonstrated for the detection of the C634R mutation through hybridization of the biotin-tagged target oligonucleotide with a surface-confined capture complementary probe and subsequent reaction with streptavidin-conjugated PbS QDs. The electrochemical transduction step involved anodic stripping voltammetric determination of the Pb(II) released after acidic dissolution of the QDs. Simultaneously with the electrolytic accumulation of Pb on the sensor surface, the embedded bismuth citrate was converted in situ to bismuth nanoparticles enabling ultra-trace Pb determination. The biosensor showed a linear relationship of the Pb(II) peak current with respect to the logarithm of the target DNA concentrations from 0.1 pmol L^− 1 to 10 nmol L^− 1, and the limit of detection was 0.03 pmol L^− 1. The biosensor exhibited effective discrimination between a single-base mismatched sequence and the fully complementary target DNA. These “green” biosensors are inexpensive, lend themselves to easy mass production, and hold promise for ultrasensitive bioassay formats.