Enhanced electrochemical performance of SnS nanoparticles/CNTs composite as anode material for sodium-ion battery

SnS/CNTs composite as anode for SIBs exhibits high reversible capacity, good cyclability as well as rate performance, which is superior to that of pure SnS. The enhanced electrochemical performance can be attributed to the adding of CNTs as a flexible and conductive structure supporter and the formation of SnS nanoparticles with small diameter.     

Bismuth oxide nanoflake@carbon film: A free-standing battery-type electrode for aqueous sodium ion hybrid supercapacitors

An efficient strategy is developed to fabricate binder-free Bi₂O₃@C nanoflake film anode, which is utilized to assemble a high-performance aqueous sodium ion hybrid supercapacitor.     

Reticular Sn nanoparticle-dispersed PAN-based carbon nanofibers for anode material in rechargeable lithium-ion batteries

Reticular tin nanoparticle-dispersed carbon (Sn/C) nanofibers were fabricated by stabilization of electrospun SnCl₄/PAN composite fibers and subsequent carbonization at different temperatures. These Sn/C composite nanofibers used as anode materials for rechargeable lithium-ion batteries (LIBs) show that the Sn/C nanofibers at 700 and 850 °C present much higher charge (785.8 and 811 mA h g^?1) and discharge (1211.7 and 993 mA h g^?1) capacities than those at 550 and 1000 °C and the as-received CNFs at 850 °C, corresponding to coulombic efficiencies of 64.9% and 81.7%, respectively. The superior electrochemical properties of the intriguing Sn/C nanofibers indicate a promising application in high performance Li-ion batteries.     

Natural nanomaterial as hard template for scalable synthesizing holey carbon naonsheet/nanotube with in-plane and out-of-plane pores for electrochemical energy storage

By tuning the structure of hard template kaolinite, we have achieved a template directed synthesis of holey carbon nanosheet/nanotube material. This carbon nanomaterial with in-plane and out-of-plane pores has shown promising electrochemical energy storage capacity.     

Low-temperature performance of LiFePO4/C cathode in a quaternary carbonate-based electrolyte

The low-temperature performance of LiFePO₄/C cathode in a quaternary carbonate-based electrolyte (1.0 M LiPF₆/EC+DMC+DEC+EMC (1:1:1:3, v/v)) was studied. The discharge capacities of the LiFePO₄/C cathode were about 134.5 mAh/g (20 °C), 114 mAh/g (0 °C), 90 mAh/g (−20 °C) and 69 mAh/g (−40 °C) using a 1C charge–discharge rate. Cyclic voltammetry measurements show obviously sluggish of the lithium insertion–extraction process of the LiFePO₄/C cathode as the operation temperature falls below −20 °C. Electrochemical impedance analyses demonstrate that the sluggish of charge-transfer reaction on the electrolyte/LiFePO₄/C interface and the decrease of lithium diffusion capability in the bulk LiFePO₄ was the main performance limiting factors at low-temperature.     

Flexible asymmetric supercapacitor based on MnO2 honeycomb structure

By controlling the electroplating time of solution containing Mn(Ac)₂, the MnO₂ nanosheets were self-assembled to the honeycomb structure and showed an excellent electrochemical performance in 1 mol/L Na₂SO₄ electrolyte. Via pairing with activated carbon as negative electrode, the capacitor could deliver a maximum energy density of 43.84 Wh/kg and a maximum power density of 6.62 kW/kg.     

Graphene supported Sn–Sb@carbon core-shell particles as a superior anode for lithium ion batteries

This paper reports the preparation and Li-storage properties of graphene nanosheets(GNS), GNS supported Sn–Sb@carbon (50–150 nm) and Sn–Sb nanoparticles (5–10 nm). The best cycling performance and excellent high rate capabilities were observed for GNS-supported Sn–Sb@carbon core-shell particles, which exhibited initial capacities of 978, 850 and 668 mAh/g respectively at 0.1C, 2C and 5C (1C = 800 mA/g) with good cyclability. Besides the GNS support, the carbon skin around Sn–Sb particles is believed to be a key factor to improve electrochemical properties of Sn–Sb.     

Nano-LiCoO2 as cathode material of large capacity and high rate capability for aqueous rechargeable lithium batteries

Crystalline nanoparticles of LiCoO₂ are prepared by a sol–gel method at 550 °C and characterized by X-ray diffraction. Their electrochemical behaviors were characterized by cyclic voltammograms, capacity measurement and cycling performance. Results show that the reversible capacity of the nano-LiCoO₂ can be up to 143 mAh/g at 1000 mA/g and still be 133 mAh/g at 10,000 mA/g (about 70C) in 0.5 mol/l Li₂SO₄ aqueous electrolyte. In addition, their cycling behavior is also very satisfactory, no evident capacity fading during the initial 40 cycles. These data present great promise for the application of aqueous rechargeable lithium batteries.     

Facile synthesized Cu-SnO2 anode materials with three-dimensional metal cluster conducting architecture for high performance lithium-ion batteries

A novel Cu-SnO₂ anode material derived from Cu₆Sn₅ alloy, retaining high conductivity of Cu and high theoretical capacity of SnO₂ with a facile synthesizing process by oxidation and reduction method. The novel Cu structure penetrates in the composite particles inducing high conductivity and spaceconfined SnO₂, which restrict the pulverization of SnO₂ during lithiation/delithiation process.     

Preparation of activated carbon from Turbinaria turbinata seaweeds and its use as supercapacitor electrode materials

Turbinaria turbinata brown seaweeds were tested as carbon electrode material in symmetric, electrochemical supercapacitors. The electrochemical properties of the carbon materials were characterised for their application as supercapacitors using cyclic voltammetry, galvanostatic charge/discharge method and electrochemical impedance spectroscopic analyses. Our initial results showed that the optimal behaviour was obtained for the sample prepared by pyrolysis at 800 °C. The average surface area of the carbon was 812 m²/g. Electrochemical tests with an organic electrolyte gave the following interesting results: a capacitance of 74.5 F/g, a specific series resistance of 0.5 Ω cm² and an ionic resistivity of 1.3 Ω cm². These results show the promising capacitive properties of carbon derived from seaweeds and their application in electrochemical supercapacitors.     

Hydrothermal synthesis of carbon nanotube/cobalt oxide core-shell one-dimensional nanocomposite and application as an anode material for lithium-ion batteries

Carbon nanotube/cobalt oxide core-shell one-dimensional nanostructures were prepared via a hydrothermal synthesis method, in which nanosize cobalt oxide crystals were homogeneously coated on the surface of carbon nanotubes. The morphologies and crystal structures of the as-prepared core-shell nanocomposites were analysed by X-ray diffraction, field emission gun scanning electron microscopy, and transmission electron microscopy. When applied as anodes in lithium-ion cells, carbon nanotube/cobalt oxide core-shell nanostructures exhibited an initial lithium storage capacity of 1250 mAh/g and a stable capacity of 530 mAh/g over 100 cycles. The good electrochemical performance could be attributed to the nanocrystalline cobalt oxide and the unique core-shell one-dimensional nanostructures.     

Synthesis of MXene-supported layered MoS2 with enhanced electrochemical performance for Mg batteries

In this paper, the petal-like MoS₂/MXene composite has been successfully synthesized by one-step hydrothermal method. With the combination of few-layer MoS₂ nanosheets and the high conductive MXene substrate, the composite exhibits enhanced capacities and rate performance as cathode material of Mg batteries.     

A non-aqueous Li/organosulfur semi-solid flow battery

A non-aqueous Li/organosulfur semi-solid flow battery is constructed. The battery with a high cell voltage of 3.36 V achieves coulombic efficiency of 99%, voltage efficiency of 73% and energy efficiency of 72% at the current density of 5 mA/cm².     

Protection of Li metal anode by surface-coating of PVDF thin film to enhance the cycling performance of Li batteries

The PVDF thin film on the surface of the lithium metal can highly suppress the lithium dendrites.     

Electrospun nano-vanadium pentoxide cathode

Nanocrystallites of vanadium pentoxide were synthesized by the hydrothermal treatment of electrospun composite nanofibers. Each crystallite of dimension ?100 nm was found to be a single crystal of δ-phase H_xV₄O₁₀ · nH₂O. The crystallinity and morphology was maintained on heating to 500 °C when V₂O₅ was formed. The electrochemical capacity of the nano-V₂O₅ in a lithium cell was found to be above 350 mAh/g. The columbic efficiency is close to 100% when small amounts of lithium bis(oxalato)borate is added to the LiPF₆ electrolyte.     

Ultrafine molybdenum carbide nanoparticles supported on nitrogen doped carbon nanosheets for hydrogen evolution reaction

Nitrogen doped carbon nanosheets supported molybdenum carbides nanoparticles (Mo_xC/NCS) have been synthesized by tuning the mass ratio of melamine and ammonia molybdate. The Mo₂C/NCS-10 exhibits superior electrocatalytic performance and stability for HER, which was attributed to N-doped carbon nanosheets, small particle size, mesoporous structure, and large electrochemical active surface area.     

The effect of sodium dodecyl sulfate solutions as gelation media on the formation of PES membranes

Sodium dodecyl sulfate (SDS) aqueous solutions were used as gelation media in the preparation of polyethersulfone (PES) membranes. The casting solution composition was the same for all the tested membranes. The temperatures of gelation media were 4 and 20°C. The concentration of SDS was changed from 0 to 3.0 g/l at 4°C and 0 to 1.6 g/l at 20°C.The surface tension of the gelation media was measured by drop weight method and the electrical conductivities were also determined. The membranes were characterized by transport parameters obtained from separation experiments and roughness parameters, obtained by the atomic force microscopic (AFM) technique.The molecular weight cut-off (MWCO) values of the studied membranes were found to be between 9 000 and 88 000 Da for membranes gelled at 4°C, and between 28 000 and 85 000 Da for membranes gelled at 20°C. The pore sizes were found to be between 3.04 and 10.73 nm for the membranes gelled at 4°C and between 4.48 and 10.74 nm for membranes gelled at 20°C, respectively. In general, both MWCO and pore size decreased with an increase of SDS concentration in gelation media when the concentration was below critical micelle concentration (CMC) and increased with an increase with SDS concentration when the concentration was above CMC. Images of membrane surfaces, taken by AFM, showed that the size of nodules and depressions decreased with a decrease in pore size. The roughness of membranes increased with an increase in pore size and MWCO.     

Edge-functionalized acetylene black anchoring sulfur for high-performance Li–S batteries

To date, most of the research on electrodes for lithium sulfur batteries has been focused on the nanostructured sulfur cathodes and achieves significant success. However, from the viewpoint of manufacturers, the nanostructured sulfur cathodes are not so promising, because of the low volumetric energy density and high cost. In this work, we obtained the low-cost, scalable, eco-friendly mass production of edge-functionalized acetylene black-sulfur(FAB-S) composites by high-energy ball-milling technique for lithium sulfur batteries. The as-prepared FAB-S composite can deliver a high initial discharge capacity of 1304 mAh/g and still remain a reversible capacity of 814 mAh/g after 200 cycles at a charge-discharge rate of 0.2 C in the voltage range of 1.7–2.7 V. The observed excellent electrochemical properties demonstrate that the cathodes obtained by the facile high-energy ball-milling method as the cathode for rechargeable Li-S batteries are of great potential because it used the sole conductive additive acetylene black(AB).Such improved properties could be attributed to the partially exfoliation of AB, which not only keeps the AB's inherent advantage, but also increases the specific surface area and forms chemical bonds between carbon and sulfur, resulting in the accumulation of the polysulfides intermediate through both the physical and chemical routes.     

Net-like SnS/carbon nanocomposite film anode material for lithium ion batteries

SnS particles with sizes of 5.0–6.5 nm were prepared by a facile method. Resorcinol–formaldehyde sol with addition of the as-prepared SnS nanoparticles was spin-coated on a copper foil to prepare net-like SnS/C composite thin-film electrode for lithium ion batteries after carbonization at 650 °C. The SnS/C nanocomposite thin-film electrode showed preferable first coulombic efficiency and excellent cycling stability. The discharge and charge capacities were respectively 542.3 and 531.3 mAh/g after 40 cycles. The attractive electrochemical performances were mainly ascribed to the ultra fine particle, which showed no evident aggregation in high-resolution TEM image, and the effects of 3-dimensional net-like carbon structure, which uniformly surrounded the SnS nanoparticles to guarantee the contact, acted as a buffer matrix to alleviate the volume expansion of Li–Sn alloy and provided enough paths for electrolyte to reach SnS active material during discharge–charge process.     

Poly(ether amine) and cross-linked poly(propylene oxide) diacrylate thin-film polymer electrolyte for 3D-microbatteries

This paper presents a novel thin-film electrolyte of a 2:1 blend of polyetheramine (glyceryl poly(oxypropylene)) and cross-linked oligomeric poly(propylene oxide) diacrylate with LiTFSI. The polyetheramine acts as a surfactant, and can thereby be applied as a conformal coating on complex surfaces—here demonstrated for porous LiFePO₄ cathodes—making it useful for 3D-microbatteries. The poly(propylene oxide) diacrylate blends with the surfactant and is easily UV cross-linked, thereby ensuring good mechanical stability. Electrolytes, ~ 2 μm thick, were casted onto LiFePO₄ cathodes and cycled against metallic lithium, displaying stable discharge capacities of ~ 8 mAh/g at room temperature and ~ 120 mAh/g at 60 °C. The electrolyte showed conductivities of 3.45 × 10^? 6 and 5.80 × 10^? 5 S cm^? 1 at room temperature and 60 °C, respectively.