We have investigated the direct electron transfer (DET) promoted by carbon nanotubes (CNTs) on an electrode containing immobilized glucose oxidase (GOx) with the aim to develop a third-generation glucose biosensor and a mediator-free glucose biofuel cell anode. GOx was immobilized via chitosan (CS) on a glassy carbon electrode (GCE) modified with multi-walled carbon nanotubes (MWCNTs). Cyclic voltammetric revealed that the GOx on the surface of such an electrode is unable to simultaneously demonstrate DET with the electrode and to retain its catalytic activity towards glucose, although the MWCNTs alone can promote electron transfer between GOx and electrode. This is interpreted in terms of two types of GOx on the surface, the distribution and properties of which are quite different. The first type exhibits DET capability that results from the collaboration of MWCNTs and metal impurities, but is unable to catalyze the oxidation of glucose. The second type maintains its glucose-specific catalytic capability in the presence of a mediator, which can be enhanced by MWCNTs, but cannot undergo DET with the electrode. As a result, the MWCNTs are capable of promoting the electron transfer, but this is without value in some mediator-free applications such as in third-generation glucose biosensors and in mediator-free anodes for glucose biofuel cells.
Graphical Abstract
Two types of glucose oxidase (GOx) are immobilized on the surface of multi-walled carbon nanotubes (MWCNTs)-modified electrode. DET (direct electron transfer)-GOx exhibits DET ability deriving from the collaboration of MWCNTs and metal impurities, is unable to electrooxidize glucose. GCA (glucose-specific catalytic activity)-GOx cannot undergo DET with the electrode. 相似文献
The authors describe a fluorescence immunoassay for galectin-4, a candidate biomarker for various cancers. Glucose oxidase was encapsulated into a zeolitic imidazolate framework to give a composite (GOx/ZIF-8 composite) that acts as a signal-transduction tag via a biomimetic mineralization process. After modification of the composite with streptavidin, it binds biotinylated antibody against galectin-4. In the immunoassay, the response to galectin-4 results from the enzymatic oxidation of glucose. This reaction produces hydrogen peroxide (H2O2) that reacts with iron(II) ions to generate hydroxy radical (?OH), which leads to the quenching of the fluorescence of gold nanoclusters (AuNCs). Accordingly, the fluorescence quenching of AuNCs depends on the concentration of target galectin-4. The GOx/ZIF-8 composite has a high loading capacity for GOx at uncompromised enzymatic activity. The fluorescence of AuNCs is sensitively quenched by ?OH radicals. Galectin-4 can be detected by this method in concentrations as low as 10 pg·mL?1. It is expected that this kind of enzyme/MOF composite-based immunoassay has a wide scope in that it may be adapted to other low-abundance proteins and biomarkers.
Graphical abstract Schematic of a fluorescence immunoassay for galectin-4, a candidate biomarker for various cancers. It is based on a composite consisting of glucose oxidase and a metal-organic framework (GOx/ZIF-8 composite) as well as gold nanoclusters (AuNC)-iron(II) system.
Carbon dots (CDs) possess unique optical properties such as tunable photoluminescence (PL) and excitation dependent multicolor emission. The quenching and recovery of the fluorescence of CDs can be utilized for detecting analytes. The PL mechanisms of CDs have been discussed in previous articles, but the quenching mechanisms of CDs have not been summarized so far. Quenching mechanisms include static quenching, dynamic quenching, Förster resonance energy transfer (FRET), photoinduced electron transfer (PET), surface energy transfer (SET), Dexter energy transfer (DET) and inner filter effect (IFE). Following an introduction, the review (with 88 refs.) first summarizes the various kinds of quenching mechanisms of CDs (including static quenching, dynamic quenching, FRET, PET and IFE), the principles of these quenching mechanisms, and the methods of distinguishing these quenching mechanisms. This is followed by an overview on applications of the various quenching mechanisms in detection and imaging.
Graphical abstract Schematic representation of the quenching mechanisms of carbon dots (CDs) which include static quenching, dynamic quenching, Förster resonance energy transfer (FRET), photoinduced electron transfer(PET), surface energy transfer (SET), Dexter energy transfer (DET) and inner filter effect (IFE). All these effects can be used to detect and image analytes.
A reagentless third generation electrochemical glucose biosensor was fabricated based on wiring the template enzyme glucose oxidase (GOx) with graphene nanoribbons (GN) in order to create direct electron transfer between the co-factor (flavin adenine dinucleotide, FAD) and the electrode. The strategy involved: (i) isolation of the apo-enzyme by separating it from its co-enzyme; (ii) preparation of graphene nanoribbons (GN) by oxidative unzipping of multi-walled carbon nanotubes; (iii) adsorptive immobilization of GNs on the surface of a screen printed carbon electrode (SPCE); (iv) covalent attachment of FAD to the nanoribbons; (v) recombination of the apo-enzyme with the covalently bound FAD to the holoenzyme; and (vi) stabilization of the bio-layer with a thin membrane of Nafion. The biosensor (referred to as GN/FAD/apo-GOx/Nafion/SPCE) is operated at a potential of +0.475 V vs Ag/AgCl/{3 M KCl} in flow-injection mode with an oxygen-free phosphate buffer (pH 7.5) acting as a carrier. The signals are linearly proportional to the concentration of glucose in the range from 50 to 2000 mg?L?1 with a detection limit of 20 mg?L?1. The repeatability (10 measurements, at 1000 mg?L?1 glucose) is ±1.4% and the reproducibility (5 sensors, 1000 mg?L?1 glucose) is ±1.8%. The biosensor was applied to the determination of glucose in human serum.
Graphical abstract Wiring of the apo-enzyme of glucose oxidase (apo-GOx) with graphene nanoribbons (GN) bound to FAD at a screen-printed carbon electrode (SPCE). Cyclic voltammetric and amperometric responses to various glucose concentrations.
A composite material consisting of multiwalled carbon nanotubes and palladium containing particles was synthesized and applied to the preparation of bulk-modified screen-printed carbon electrodes (Pd-MWCNT-SPCE) and surface-modified screen-printed carbon electrodes (Pd-MWCNT/SPCE). They were characterized by cyclic voltammetry and hydrodynamic chronoamperometry in solution of pH 7.5. Both electrodes were then modified with glucose oxidase (GOx) by drop-coating a solution of GOx and Nafion® on their surface. Glucose can be determined via enzymatically formed H2O2. In an alternative approach, gold nanoparticles (5 nm) were incorporated into the biolayer of the electrodes. The resulting electrodes of type GOx/Pd-MWCNT-SPCE and GOx-Au/Pd-MWCNT-SPCE showed acceptable analytical performance at working potentials between ?0.20 V and ?0.50 V in case of hydrodynamic chronoamperometry. Both electrodes can be operated best at a working potential of ?0.40 V vs SCE, with acceptable linearity of the methods in sub mM concentration ranges and with LOQs of 0.14 mM and 0.07 mM for glucose for the GOx/Pd-MWCNT-SPCE and GOx-Au/Pd-MWCNT-SPCE, respectively. Incorporation of gold nanoparticles prolongs the operational lifetime of the electrodes by two weeks. The GOx/Pd-MWCNT-SPCE based method was applied to the determination of glucose in multifloral honey, and the GOx-Au/Pd-MWCNT-SPCE method to the determination of glucose in blood serum. In both cases there was a good agreement with the results obtained by commercially available equipment for determination of glucose.
Graphical abstract Schematic of a screen printed carbon biosensor based on the use of multiwalled carbon nanotubes modified with palladium-containing particles and glucose oxidase. It can be applied to the amperometric determination of glucose in blood serum and multifloral honey
The authors describe enzyme based nanobiosensors for continuous monitoring of glucose, with the long term goal of using them as smart diagnostic tattoos. The method is founded on two main features: (1) The fluorescence intensity and decay times of glucose oxidase (GOx) and of GOx labeled with fluorescein (FS) or a ruthenium chelate (Ru) reversibly change during interaction with glucose; (2) The (labeled) enzyme is linked to magnetite magnetic nanoparticles (MNPs) which permits the MNPs to be physically manipulated. It is found that a stable link between MNPs and GOx is only accomplished if the number of amino groups on the GOX is artificially enlarged (to form GOxsam). Fluorescence decay data are best acquired with 8-nm MNPs where scattering is marginal; The activity of GOx is found not to be affected by immobilization on the MNPs. The various immobilized enzymes (GOxsam, GOxsam-FS and GOxsam-Ru; all on MNPs) differ only slightly in terms of linear response to glucose which ranged from 0.5 mM to at least 3.5 mM. The RSDs are about 5% (for n = 5), the detection limits are at ～50 μM, and the sensor lifetimes are >1 week.
Graphical abstract Nanobiosensors consisting of Fe3O4 magnetic nanoparticles linked to glucose oxidase, previously enriched with amino groups (GOxsam) and containing fluorescein (FS) or a ruthenium derivative (Ru), are presented as a new kind of smart tattoos for glucose monitoring.
Reduced graphene oxide (RGO) was used to construct a bienzyme biosensor containing horseradish peroxidase (HRP) and glucose oxidase (GOx). A poly(toluidine blue) (pTB) film containing RGO acted as both enzyme immobilization matrix and electron transfer mediator. The bienzyme biosensor was characterized by electrochemical techniques and displays a highly sensitive amperometric response to glucose and hydrogen peroxide (H2O2) at a potential as low as −0.1 V (vs. SCE). It is shown that use of RGO causes a strong enhancement on the amperometric responses. H2O2 formed by the action of GOx in the presence of oxygen can be further reduced by HRP in the pTB film contacting the RGO modified electrode. In the absence of oxygen, glucose oxidation proceeds by another mechanism in which electron transfer occurs from GOx to the electrode and with pTB acting as the mediator. Amperometric responses to glucose and H2O2 follow Michaelis-Menten kinetics. The experimental conditions were optimized, and under these conditions glucose can be determined in the 80 μM to 3.0 mM range with a detection limit of 50 μM. H2O2, in turn, can be quantified in up to 30.0 μM concentration with a detection limit of 0.2 μM. The bienzyme biosensor is reproducible, repeatable and stable. Finally, it has been successfully applied to the determination of glucose in plasma samples.
Schematic representation of glocuse detection at GCE/RGO/pTB-HRP-GOx.
We have studied the direct electrochemistry of glucose oxidase (GOx) immobilized on electrochemically fabricated graphite nanosheets (GNs) and zinc oxide nanoparticles (ZnO) that were deposited on a screen printed carbon electrode (SPCE). The GNs/ZnO composite was characterized by using scanning electron microscopy and elemental analysis. The GOx immobilized on the modified electrode shows a well-defined redox couple at a formal potential of −0.4 V. The enhanced direct electrochemistry of GOx (compared to electrodes without ZnO or without GNs) indicates a fast electron transfer at this kind of electrode, with a heterogeneous electron transfer rate constant (Ks) of 3.75 s−1. The fast electron transfer is attributed to the high conductivity and large edge plane defects of GNs and good conductivity of ZnO-NPs. The modified electrode displays a linear response to glucose in concentrations from 0.3 to 4.5 mM, and the sensitivity is 30.07 μA mM−1 cm−2. The sensor exhibits a high selectivity, good repeatability and reproducibility, and long term stability.
Graphical representation for the fabrication of GNs/ZnO composite modified SPCE and the immobilization of GOx
A method is described for the synthesis of a nanocomposite containing FeOOH and N-doped carbon nanosheets. The nanocomposite was synthesized by a hydrothermal method using a Fe3O4/chitosan nanocomposite as the precursor. The nanocomposite displays peroxidase-like activity and catalyzes the oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) by H2O2. This results in the formation of a blue colored product with an absorption maximum at 652 nm in the UV-vis spectra. Based on these findings, colorimetric assays were worked out for both hydrogen peroxide and glucose. The H2O2 assay works in the 5 to 19 μM concentration range, and the limit of detection is 5 nM. The glucose assay works in the 8 μM to 0.8 mM concentration range and has a 0.2 μM detection limit. The method was successfully applied to the determination of glucose in human urine.
Graphical abstract Schematic of the hydrothermal synthesis of a FeOOH/N-doped carbon nanocomposite. It was used to replace peroxidase enzyme for the catalytic oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) in a visual colorimetric test for glucose in human urine.
This paper describes a CdTe quantum dot-based fluorescence resonance energy transfer (FRET) based assay for the detection of the breast cancer biomarker microRNA. The method relies on energy transfer between DNA-templated silver nanoclusters (AgNCs) and CdTe QDs. Interaction between double strand oligonucleotide and QDs can be detected qualitatively through gel analysis and quantitatively by the signal amplification from AgNCs to QDs via FRET, best measured at an excitation wavelength of 350 nm and at emission wavelengths of 550 and 590 nm. Three microRNAs (microRNA-21, microRNA-155 and Let-7a) were quantified to verify the feasibility of the method, and a high sensitivity for microRNAs was achieved. Fluorescence intensity increases linearly with the log of the concentration of microRNA 155 in the 5.0 pM to 50 nM range, with a 1.2 pM detection limit.
Graphical abstract Schematic presentation of a quantum dot-based (QD-based) fluorescence resonance energy transfer technique for the detection of microRNA (miRNA). The method relies on energy transfer between DNA-templated silver nanoclusters (AgNCs) and QDs.
The authors describe a method for the preparation of orange-red emissive carbon dots (CDs) with excitation/emission peaks at 520/582 nm. The CDs were hydrothermally prepared by a one-pot strategy from trimesic acid and 4-aminoacetanilide. The fluorescence of the CDs is strongly quenched by hydrogen peroxide. The oxidation of glucose by glucose oxidase (GOx) produces H2O2 that quenches the fluorescence via static quenching. Based on this phenomenon, a fluorometric method was established for the determination of glucose. Under the optimum conditions, response is linear in the 0.5 to 100 μM glucose concentration range, with a 0.33 μM limit of detection. The method is selective for glucose over its analogues and was successfully applied to the determination of glucose in diluted human serum and in urine from diabetics and healthy individuals. Recoveries from spiked samples range from 98.7 to 102.5%.
The authors report that carbon nitride quantum dots (CN QDs) exert a strong enhancing effect on the Cu(II)/H2O2 chemiluminescent system. Chemiluminescence (CL) intensity is enhanced by CN QDs by a factor of ~75, while other carbon nanomaterials have a much weaker effect. The possible mechanism of the effect was evaluated by recording fluorescence and CL spectra and by examining the effect of various radical scavengers. Emitting species was found to be excited-state CN QDs that produce green CL peaking at 515 nm. The new CL system was applied to the sensitive detection of H2O2 and glucose (via glucose oxidase-catalyzed formation of H2O2) with detection limits (3σ) of 10 nM for H2O2 and 100 nM for glucose. The probe was employed for glucose determination in human plasma samples with satisfactory results.
Graphical abstract The effect of carbon nitride quantum dots (CN QDs) on Cu(II)-H2O2 chemiluminescence reaction was studied and the new CL system was applied for sensitive detection of glucose based on the glucose oxidase (GOx)-catalyzed formation of H2O2.
The authors describe a fluorometric glucose assay that is based on the use of MnO2 nanosheets and copper nanoclusters (CuNCs) acting as nanoprobes. The CuNCs were synthesized by using bovine serum albumin as a template by chemical reduction of copper(II) sulfate. On addition of MnO2 nanosheets to a colloidal solution of CuNCs, the fluorescence of CuNCs (measured at excitation/emission wavelengths of 335/410 nm) is quenched. However, in the presence of enzymatically generated H2O2, the MnO2 nanosheets are reduced to form Mn(II) ions. As a result, fluorescence intensity recovers. The glucose assay is based on the enzymatic conversion of glucose by glucose oxidase to generate H2O2 and glucuronic acid. The calibration plot is linear in the 1 μM to 200 μM glucose concentration range, and the detection limit is 100 nM. The method was successfully applied to the determination of glucose in spiked human serum samples.
Graphical abstract A sensitive fluorescent bioassay is reported for the detection of glucose based on the hydrogen peroxide-induced decomposition of a quencher system composed of MnO2 nanosheets and copper nanoclusters (CuNCs).
In this work we present a strategy for the covalent immobilization of periodate oxidized glucose oxidase () to aminated silica nanoparticles (ASNPs) modified on gold electrodes. Silica nanoparticles greatly enhanced the catalytic
ability of GOx toward the oxidation of glucose and improved the electron transfer between the GOx and the electrode surface.
ASNPs of varying size—that is 100, 80, 60, and 30 nm—were prepared, and they were used to fabricate biosensors. Electrochemical
impedance spectroscopy (EIS) of ferrocyanide followed the assembly process and verified the successful immobilization of on ASNPs modified on gold electrodes. From the analysis of catalytic signals of biosensors using different sizes of ASNPs
under the same conditions, the surface concentration of electrically wired enzyme (ΓET) was estimated and was found to increase with decreasing ASNPs size. Therefore, the sensitivity of biosensors using smaller
ASNPs was higher than that using larger particles. Specifically, we utilized the ASNPs with optimal size (30 nm) to fabricate
the glucose biosensor. The resulting electrodes showed a wide linear response to glucose at least to 6 mM and reached 95%
of the steady-state current in less than 4 s with a sensitivity of 5.02 μA mM−1 cm−2 and a detection limit of 0.01 mM. The biosensor also showed excellent stability and good reproducibility.
Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users. 相似文献
This review (with 35 references) summarizes the various strategies used in biosensors for galactose, and their analytical performance. A brief comparison of the enzyme immobilization methods employed and the analytical performance characteristics of a range of galactose biosensors are first summarized in tabular form and then described in detail. Selected examples have been included to demonstrate the various applications of these biosensors to real samples. Following an introduction into the field that covers the significance of sensing galactose in various fields, the review covers biosensors based on the use of galactose oxidase, with a discussion of methods for their immobilization (via cross-linking, adsorption, covalent bonding and entrapment). This is followed by a short section on biosensors based on the use of galactose dehydrogenase. The conclusion section summarizes the state of the art and addresses current challenges.
Graphical abstract Fabrication of a disposable screen-printed (a) electrochemical galactose biosensor (b) for real sample analysis and a dummy biosensor (c) for compensating the effect of interferences
An optical method is described for the quantitation of glucose by using oxygen-deficient α-MoO3-x nanoflakes. It is based on the use of glucose oxidase (GOx) which produces hydrogen peroxide on oxidation of glucose. Hydrogen peroxide then oxidizes the α-MoO3-x nanoflakes, and this results in a visible color change from blue to colorless. The color change can be measured photometrically at 740 nm. The method has a 68 nM detection limit.
Graphical Abstract Mechanism of glucose detection using blue colored oxygen deficient 2D α-MoO3-x nanoflakes. Hydrogen peroxide (H2O2) is formed as a by-product in the conversion of glucose to glucono-1,5-lactone by glucose oxidase (GOx). In the presence of H2O2, the oxygen vacancies in α-MoO3-x nanoflakes are filled up, and this leads to the loss of blue color of the nanoflakes because they are converted back to colorless bulk α-MoO3.
The authors describe a method for functionalization of gold nanoparticles (AuNPs) with the supramolecular host molecule, curcubit[7]uril (CB[7]) which can bind rhodamine B (RhB). The fluorescence of RhB is quenched by the AuNPs via surface energy transfer. On addition of ATP, a dimeric RhB-ATP complex is formed and RhB is pushed out of CB[7]. Hence, fluorescence increases by a factor of 8. This fluorescence recovery effect has been utilized to develop a new detection scheme for ATP. The assay, measured at fluorescence excitation and emission wavelengths of 500 nm and 574 nm respectively, works in the 0.5–10 μM concentration range and has a 100 nM detection limit. The method is not interfered by UTP, GTP, CTP, TTP, ascorbic acid and glutathione.
Graphical abstract Schematic of a method for determination of ATP in the 500 nM to 10 μM concentration range by using fluorescence recovery after surface energy transfer (SET) between rhodamine B (RhB) and gold nanoparticles capped with curcubit[7]uril (CB[7]).
We report on a sensitive and selective fluorescent assay utilizing native carbon dots (CDs) as signal transducers. The optical probes 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) or 3,3′-diaminobenzidine (DAB) were employed as substrates of horseradish peroxidase (HRP). It was found that the corresponding oxidation products (ox-ABTS or ox-DAB) quench the fluorescence of CDs, mainly via photoinduced electron transfer in case of ox-ABTS, and via aggregation and inner filter effect in case of ox-DAB. By coupling with bienzyme (glucose oxidase and HRP)-mediated biocatalytic reactions, the method was applied to the determination of hydrogen peroxide and glucose. In case of ABTS as the substrate of HRP, a wide linear range (0.05 to 100 μM) and a very low detection limit (10 nM) for glucose were attained. The method was applied to the determination of glucose in human serum and the results were found to agree well with data provided by a local hospital.
Graphical abstract In this work, a sensitive and selective fluorescent assay was developed for probing the enzymatic substrates of hydrogen peroxide and glucose which utilized native carbon dots (CDs) as signal transducer.
This review (with (318) refs) describes progress made in the design and synthesis of morphologically different metal oxide nanoparticles made from iron, manganese, titanium, copper, zinc, zirconium, cobalt, nickel, tungsten, silver, and vanadium. It also covers respective composites and their function and application in the field of electrochemical and photoelectrochemical sensing of chemical and biochemical species. The proper incorporation of chemical functionalities into these nanomaterials warrants effective detection of target molecules including DNA hybridization and sensing of DNA or the formation of antigen/antibody complexes. Significant data are summarized in tables. The review concludes with a discussion or current challenge and future perspectives.
A highly selective electrochemical sensor was fabricated based on a modified carbon paste electrode with zinc ferrite nanoparticles (ZnFe2O4 NPs). The nanocomposite has attractive properties such as high surface-to-volume ratio and good electrocatalytic activity towards the drugs acetaminophen (AC), epinephrine (EP), and melatonin (MT), best at working voltages of 0.35, 0.09 and 0.55 V (vs. Ag/AgCl), respectively. The linear ranges (and detection limits) are 6.5–135 (0.4) μmol L?1 for AC, 5–100 (0.7) μmol L?1 for EP, and 6.5–145 (3) μmol L?1 for MT.
Graphical abstract A novel electrochemical sensor based on a modified carbon paste electrode with zinc ferrite nanoparticles (ZnFe2O4) for the simultaneous detection of the acetaminophen, epinephrine and melatonin was fabricated
