Modified solid electrodes for stripping voltammetric determination of tin

The paper describes the determination of tin by ASV using modified thick film electrodes. Three different types of electrodes were developed: One modified with a mixture of Nafion and mercury(II)acetate, one modified with diethyldithiocarbamate (DDC) or pyrrolidinedithiocarbamate (PDC) and mercury(II)acetate, and one modified with calomel. The analyte was accumulated on the electrode surface after special electrochemical pretreatment of the modified electrode. After recording the voltammogram the electrodes were electrochemically regenerated. By virtue of their lifetime and their measurement reproducibility, we preferred the DDC and PDC modified electrodes. They can be used for months without changing their chemical characteristics. The linear range for tin determination with these electrodes is between 1 and 100 μg/L; the detection limit was calculated as 0.9 μg/L. The electrodes were applied to the direct determination of tin in different canned fruit juices without special sample pretreatment. Received: 20 December 1996 / Revised: 11 March 1997 / Accepted: 13 March 1997     

Modified solid electrodes for stripping voltammetric determination of tin

The paper describes the determination of tin by ASV using modified thick film electrodes. Three different types of electrodes were developed: One modified with a mixture of Nafion and mercury(II)acetate, one modified with diethyldithiocarbamate (DDC) or pyrrolidinedithiocarbamate (PDC) and mercury(II)acetate, and one modified with calomel. The analyte was accumulated on the electrode surface after special electrochemical pretreatment of the modified electrode. After recording the voltammogram the electrodes were electrochemically regenerated. By virtue of their lifetime and their measurement reproducibility, we preferred the DDC and PDC modified electrodes. They can be used for months without changing their chemical characteristics. The linear range for tin determination with these electrodes is between 1 and 100 μg/L; the detection limit was calculated as 0.9 μg/L. The electrodes were applied to the direct determination of tin in different canned fruit juices without special sample pretreatment. Received: 20 December 1996 / Revised: 11 March 1997 / Accepted: 13 March 1997     

Amperometric sensors based on poly(3,4-ethylenedioxythiophene)-modified electrodes: discrimination of white wines

The voltammetric responses on selected white wines of different vintages and origins have been systematically collected by three different modified electrodes, in order to check their effectiveness in performing blind analysis of similar matrices. The electrode modifiers consist of a conducting polymer, namely poly(3,4-ethylenedioxythiophene) (PEDOT) and of composite materials of Au and Pt nanoparticles embedded in a PEDOT layer. Wine samples have been tested, without any prior treatments, with differential pulse voltammetry technique. The subsequent chemometric analysis has been carried out both separately on the signals of each sensor, and on the signals of two or even three sensors as a unique set of data, in order to check the possible complementarity of the information brought by the different electrodes. After a preliminary inspection by principal component analysis, classification models have been built and validated by partial least squares-discriminant analysis. The discriminant capability has been evaluated in terms of sensitivity and specificity of classification; in all cases quite good results have been obtained.     

Electronic tongue based on an array of metallic potentiometric sensors

An electronic tongue system based on the array of six metallic potentiometric sensors (metallic wires) was developed and utilized for discrimination of foodstuffs: several types of vinegar and fruit juices. Copper, tin, iron, aluminum, brass and stainless steel wires were included in the array and supplemented by pH glass electrode. The response of potentiometric metallic sensors towards various organic acids has been studied and possible sensitivity mechanisms were discussed. Overall potential changes of metallic sensors were exanimate as complex mixed signals influenced by several components presenting in analyte employing chemometric approach. The multisensor array of such a type can be useful for several applications since of simplicity in handling, low cost of sensors and easy measure procedure.     

A potentiometric hydrazine sensor: para-Ni-tetraaminophenylporphyrin/Co-cobaltite/SNO2:F modified electrode

Three glass electrodes covered with Co-cobaltite/SnO₂:F (to obtain conducting glass electrodes) modified with p-Ni-tetraaminophenylporphyrin are described. In one electrode the porphyrin was absorbed on the electrode surface at room temperature, in another the porphyrin was electropolymerized on the electrode surface by cyclic voltammetry, and in the third the bare electrode was immersed in DMF containing the porphyrin and refluxed 6?h at 150°C. The three electrodes were tested as electrocatalysts for the oxidation of hydrazine and as potentiometric sensors of this chemical. The electrode modified by refluxing showed good electrocatalytic behavior as well as a linear relationship between its open circuit potential and the concentration of hydrazine in a concentration range from 0.16 to 12?µM, with fast response. These characteristics indicate that the conducting glass electrode of Co-cobaltite/SnO₂:F covered with p-Ni-tetraaminophenylporphyrin by the reflux method is a good potentiometric sensor of hydrazine. The active site is probably the ligand that changes its electron density by formation of a supramolecular system.     

Anti‐Interferent Properties of Oxidized Nickel Based on Layered Double Hydroxide in Glucose Amperometric Biosensors

An amperometric biosensor based on Pt electrodes modified with a thin film of a Ni, Al layered double hydroxide (LDH), submitted to a preliminary oxidative treatment in order to have the nickel centers at the oxidation state +4, and glucose oxidase (GOx) is presented. The oxidized LDH acts both as a system to support the enzyme and as a barrier to anions since it acquires an overall negative charge, as demonstrated by electrochemical impedance spectroscopy. Even if the biosensor response is due to the detection of H₂O₂ at anodic potentials, glucose can be accurately determined in the presence of ascorbic acid or other interferences, commonly present in real matrices in anionic form, since they can not reach the electrode surface. The effectiveness of the developed biosensor has been demonstrated by measuring glucose in samples of fruit juices containing ascorbic acid at high levels.     

New supramolecular interactions for electrochemical sensors development: different cucurbit[8]uril sensing platform designs

Three different strategies for cucurbit[8]uril immobilization on a glassy carbon electrode have been assayed. The electrochemical properties of the resulting modified electrodes in solutions containing neutral, positively and negatively charged potential cucurbit[8]uril guests were investigated by cyclic voltammetry and electrochemical impedance spectroscopy. The comparison of the electrochemical behaviour exhibited by the unmodified electrodes against various probes, with respect to that of each modified electrode, resulted in an appropriate method to choose among different strategies for the development of electrochemical sensors. These sensors are based on the incorporation of the cucurbit[8]uril molecular selection properties that depend on the chemical characteristics of the potential analytes. Furthermore, atomic force microscopy was employed for the characterization of the different surfaces developed.     

Characterization and Potential Applications of Immobilized Glucose Oxidase and Polyphenol Oxidase

Pyrrole functionalized polystyrene (PStPy) was copolymerized with pyrrole to obtain a conducting copolymer, P(PStPy‐co‐Py) which is used as the immobilization matrix. Glucose oxidase and polyphenol oxidase enzymes were immobilized via the entrapment method by electrochemical polymerization. Enzyme electrodes were prepared by electrolysis at a constant potential using sodium dodecyl sulfate (SDS) as the supporting electrolyte during the copolymerization of PStPy with pyrrole. Maximum reaction rates (V_max) and enzyme affinities (Michaelis‐Menten constants, K_m) were determined for the enzyme entrapped both in polypyrrole (PPy) and P(PStPy‐co‐Py) matrices. Optimizations of enzyme electrodes were done by examining the effects of temperature and pH on enzymes' activities along with the shelf life and operational stability investigations. Glucose oxidase enzyme electrodes were used for human serum analysis and glucose determination in two brands of orange juices. Polyphenol oxidase enzyme electrodes were used for the determination of phenolics in red wines of Turkey.     

Electrochemical behavior of riboflavin immobilized on different matrices

The electrochemical behavior of riboflavin (RF) adsorbed on different surfaces of inorganic matrices was investigated using modified carbon paste electrodes. Silica gel and sol-gel silica modified with niobium oxide were denominated as (SN) and (SN(sol-gel)), respectively. These materials were treated with a H3PO4 solution to graft phosphate groups and were denominated as (SNP) and (SNP(sol-gel)). The immobilization of RF on these materials indicated a high electrode stability, avoiding leaching out of the electroactive species (RF) from the electrode surface. The values of formal potential (E0') of the adsorbed RF on the different matrices changed from -283 (SNRF) up to -165 mV (SNPRF(sol-gel)) vs SCE in 0.1 moll(-1) NaNO3 solution at pH 7.0. Compared to the E0' for soluble RF, the values are shifted 183 up to 305 mV toward more positive potentials. The stability of the electrodes and the formal potential of the adsorbed RF on different matrices remained constant upon changing the solution pH from 3 to 8. Some kinetic parameters were estimated; indicating that all systems studied presented a good electron transfer rate.     

Extending the dynamic range of electrochemical sensors using multiple modified electrodes

Multiple electrodes, combined with a chemometric strategy to calibrate the measurement response, have been used for the determination of an analyte across a broader dynamic range than is possible with a single electrode. The model system used for the detection of copper comprised electrodes modified with a self-assembled monolayer. The electrodes were modified with the copper-complexing species (3-mercaptopropionic acid, thioctic acid, and the peptides cysteine and Gly-Gly-His) and copper was determined over concentrations ranging from nanomolar to millimolar using voltammetric analysis. We have demonstrated that by combining the calibration functions from the four electrodes a better estimate (i.e. with smaller variance) of the concentration of the analyte is obtained. Measurement uncertainty is expressed for independently prepared electrodes, which allows the possibility of commercial production and factory calibration. The principles of using multiple electrodes modified with recognition elements with different affinities for the target analyte to extend the dynamic range of sensors is a general one that could be applied to other analytes.     

Electro-Catalytic Oxidation of Ascorbic Acid at a Cobalt-Salen Polymer Modified Electrode and Analytical Applications

ABSTRACT

The preparation and electrochemical characteristics of electrodes modified by cobalt complexes of N, N' - bis(salicylidene)-ethane -1, 2- diamine (salen) are described. A cobalt-salen polymer film modified electrode has strong electro-catalytic effects for the oxidation of ascorbic acid. The anodic peak potential of ascorbic acid shifted negatively for 400 m V. The catalytic reaction rate constant determined by rotating disk experiments is 7.08×10⁵ mol s^?1 cm^3. The catalytic mechanism and the effect of film thickness are discussed. A sensitive voltammetric response for ascorbic acid was obtained covering a linear range from 1.0×10^?6 to 1.0×10^?3 mol-L^?1 The modified electrode showed good stability and reproducibility. The electrode was used to the determination of ascorbic acid in fruit juices and showed promising results compared with conventional methods. The electro-catalytic effect of several metal-salen complexes and a similar Schiff base derivative for ascorbic acid was compared.     

Discrimination of apple juice and herbal liqueur brands with solid-state electrodes covered with polyaniline and thiacalixarenes

Solid-contact ion-selective electrodes based on glassy carbon electrode covered with electropolymerized polyaniline and tetrasubstituted thiacalix[4]arene ionophores with hexyl and o-pyridylamido functional groups at the lower rim have been developed and examined in the discrimination of the brands of apple juices and herbal liqueurs. For this purpose, the liquids tested were diluted and spiked with a constant amount of Fe³⁺ ions. The variation of the signal toward Fe³⁺ ions was achieved due to their involvement in the reactions with the organic ligands and the antioxidants present. As was shown, the combination of the three electrodes with various receptors makes it possible to predict the brand of apple juices and herbal liqueurs using linear discriminant analysis in 95-100% cases. The discrimination procedure makes it possible to discriminate liquids within 20 min. Besides, the electrodes developed make it possible to detect individual antioxidants (ascorbic, malic, oxalic acids, hydroquinone, and quercetin) in the range from 5.0 × 10⁻⁶ to 1.0 × 10⁻² M in direct potentiometric measurements and redox titration.     

Electroredox Behavior of Novel Poly viol ogens Modified Electrodes

The electroredox behavior of novel modified electrodes coated with complexes of different polyviologens was investigated using cyclic voltammetry. The influences of compositions of electrolyte complex on the reversibility of the modified electrode and the electrochromic properties were studied also. It was found that all the ratios of integrated charges of cathodic to anodic scan (Qc/QA) are close to 1, which indicates that these modified electrodes have good reversible behavior. Repeated stepping over the first wave for 500 scans, the PSS-PX(p)V modified electrode showed excellent stability. The first reduction potential (E1), decrease of current height (Dec%), response time (tre tox) of various polyviologen modified electrodes were reported. In addition, the effect of the coverage of polyviologen on the electrode surface was also examined. The rate of electron transfer in this heterogeneous system is diffusion-controlled, consistent with the Conttrell equation.     

Diazonium salts: Stable monolayers on gold electrodes for sensing applications

The modification of gold electrodes with 4-carboxyphenyl diazonium salts to form stable layers for sensing applications is reported. Electrochemical reduction of 4-carboxyphenyl diazonium salts on gold electrodes yielded more stable layers than alkanethiol self-assembled monolayers in terms of extremes of electrode potential, sonication and with time. The application of the 4-carboxyphenyl modified electrodes for electrochemical sensing, which typically requires short chain alkanethiols on gold electrodes, is demonstrated via the covalent attachment of oligopeptides for the selective detection of Cu²⁺, Cd²⁺ and Pb²⁺. The diazonium salt/peptide modified gold electrodes not only had greater stability but also performed with lowest detected concentration to alkanethiol/peptide modified electrodes and with far greater sensitivity than the metal ion sensors when diazonium salt/peptide modified similar glassy carbon electrodes were employed.     

A Laser Reduced Graphene Oxide Grid Electrode for the Voltammetric Determination of Carbaryl

Laser-reduced graphene oxide (LRGO) on a polyethylene terephthalate (PET) substrate was prepared in one step to obtain the LRGO grid electrode for sensitive carbaryl determination. The grid form results in a grid distribution of different electrochemically active zones affecting the electroactive substance diffusion towards the electrode surface and increasing the electrochemical sensitivity for carbaryl determination. Carbaryl is electrochemically irreversibly oxidized at the secondary amine moiety of the molecule with the loss of one proton and one electron in the pH range from 5 to 7 by linear scan voltammetry (LSV) on the LRGO grid electrode with a scan rate of 300 mV/s. Some interference of the juice matrix molecules does not significantly affect the LSV oxidation current of carbaryl on the LRGO grid electrode after adsorptive accumulation without applied potential. The LRGO grid electrode can be used for LSV determination of carbaryl in fruit juices in the concentration range from 0.25 to 128 mg/L with LOD of 0.1 mg/L. The fabrication of the LRGO grid electrode opens up possibilities for further inexpensive monitoring of carbaryl in other fruit juices and fruits     

Introduction and Application of Electrochemical Sensors Based on Screen-Printed Technology

We report here the development of chemical sensors based on screen-printed technology in our research group to solve major analytical problems in environmental and clinical aspects. The purpose of the research is aimed at the enhancement of selectivity and sensitivity for analysis and monitoring of pollutants and analytes using novel chenically modified screen-printed electrodes. For example, an enzyme reactor coupled with a copper-plated screen-printed carbon electrode (CuSPE) was developed for glucose sensing. The electrocatalytic reduction of enzymatically produced H2O2 at the CuSPE was determined by flow injection analysis (FIA) in pH 7.4 PBS. The proposed method was applied to determine glucose content in fruit juice and clinical sample and satisfactory results with good recoveries were obtained. A thoroughly kinetics and mechanism study was also done for those systems that are verified in analytical applications.     

Electropolymerization of Metallophthalocyanines Carrying Redox Active Metal Centers and their Electrochemical Pesticide Sensing Application

In this study, modified electrodes were constructed with the electropolymerization of metallophthalocyanines (MPcs) carrying redox active metal cations and electropolymerizable substituents. Then these electrodes were tested as selective and sensitive electrochemical pesticide sensors. Incorporation of the redox active Co(II) (CoPc(MOR‐NAF)), Cl–Mn(III) (MnPc(MOR‐NAF)), and Ti(IV)O (TiOPc(MOR‐NAF)) metal cations into Pc cavity increased the redox activity of Pc ring. Moreover, redox active and electropolymerizable 5‐{[(1E)‐(4‐morpholin‐4‐ylphenyl)methylene]amino}‐1‐naphthoxy substituents (MOR‐NAF) on the Pc ring triggered coating of the complexes on the electrode surface with the electropolymerization reactions. Therefore, modified electrodes GCE/MPc(MOR‐NAF) were constructed with the electropolymerizations of MPcs. These electrodes illustrated reasonable redox activity and conductivity for the potential applications in different fields of the electrochemical technologies. Pesticide sensing measurements indicated that changing the metal center of the complexes significantly altered their sensing activities. Among the complexes, GCE/CoPc(MOR‐NAF) electrode behaved as the most sensitive and selective electrode and it sensed the parathion with good selectivity and sensitivity. GCE/CoPc(MOR‐NAF) electrode showed a wider linear range (0.075‐5.75 μmoldm⁻³) and smaller LOD (0.025 μmoldm⁻³) and higher sensitivity (3.46 Acm⁻²M⁻¹) for the parathion sensing. Although GCE/TiOPc(MOR‐NAF) electrode also sensed the parathion with a high sensitivity, its selectivity was poor and the linear range of this sensing was very narrow. Differently GCE/Cl–MnPc(MOR‐NAF) electrode only sensed eserine with reasonably sensitivity.     

Beer classification based on the array of solid-contact potentiometric sensors with thiacalixarene receptors

Potentiometric sensors based on carbon electrodes made by screen-printing and glassy carbon electrodes covered with electropolymerized polyaniline and thiacalix[4]arene receptors have been developed for discrimination of various beer brands using three sensors. The prediction was 100% true according to principal component analysis and linear discriminant analysis.     

Electrochemical oxidation of p-nitrophenol using graphene-modified electrodes, and a comparison to the performance of MWNT-based electrodes

The electrochemical oxidation of p-nitrophenol (p-NP) has been studied comparatively on a graphene modified electrode and a multiwall carbon nanotube (MWNT) electrode by using cyclic and differential pulse voltammetry. The sensors were fabricated by modifying screen-printed electrodes with graphene and MWNT nanomaterials, respectively, both dispersed in Nafion polymer. p-NP is irreversibly oxidized at +0.9?V (vs. the Ag/AgCl) in solutions of pH 7. The height and potential of the peaks depend on pH in the range from 5 to 11. In acidic media, p-NP yields a well-defined oxidation peak at +0.96?V which gradually increases in height with the concentration of the analyte. In case of differential pulse voltammetry in sulfuric acid solution, the sensitivity is practically the same for both electrodes. The modified electrodes display an unusually wide linear response (from 10???M to 0.62?mM of p-NP), with a detection limit of 0.6???M in case of the graphene electrode, and of 1.3???M in case of the MWNT electrode.