Influence of the stretching in the crystallinity of biaxially oriented polypropylene (BOPP) films

Summary The production of biaxially oriented polypropylene (BOPP) films, by tenter-frame technology in its different steps, was studied to find the crystalline morphology of these films. DMA, DSC, and WAXD measurements and tensile tests were carried out for the cast film, the MDO film (the produced film in the machine direction orienter unit) and BOPP film. The obtained results suggest that the stretchings lead to a strong alignment of the crystals, producing fibers oriented in the stretching direction. This fact can be proved by WAXD, DMA, and tensile tests, moreover the DSC technique is not sensitive to detect these changes.     

Crystal structure,morphology, and mechanical properties of biaxially oriented polyamide-6 films toughened with poly(ether block amide)

Biaxially oriented polyamide-6 (BOPA) film has been widely used in many packaging applications. However, the BOPA film with excellent toughness is still required when utilizing in the field of soft-packaged lithium - ion batteries, pharmaceutical blister packaging, or frozen food packaging especially for vacuum packaging of irregular-shaped food products. The purpose of this study was to improve the toughness of BOPA films by toughening with poly(ether block amide) (PEBA) (BOPA/PEBA films) based on the simultaneous biaxial stretching technology. The crystal structure, morphology, optical properties, barrier, and mechanical properties of BOPA/PEBA films were investigated. The results showed that the incorporation of PEBA into BOPA films slightly decreased the melting temperature and crystallinity of PA6, and the BOPA/PEBA films exhibited only α-form crystals and no preferential orientation in the machine direction (MD) and transition direction (TD). The morphological observation showed that higher addition of PEBA led to the formation of microvoids due to the poor compatibility between PA6 and PEBA. As a result, the transmittance and oxygen barrier properties of the BOPA/PEBA films decreased. In addition, mechanical analysis suggested that the addition of PEBA could effectively improve the toughness of BOPA film.     

Surface orientation of polypropylene. II. Determination for uniaxially and biaxially oriented films using internal reflection spectroscopy

The major objective of this work was to develop a simple and rapid technique to quantitatively measure the macromolecular chain orientation in polypropylene surfaces. A previously described experimental design employing attenuated total reflection spectroscopy near the critical angle was applied. The infrared dichroism of the 841- and 809-cm^?1 bands of polypropylene was used to quantitatively determine a fractional orientation function of the macromolecular chains along the three major film axes (machine direction, transverse direction, and thickness or normal direction). The surface orientation of a set of polypropylene films uniaxially extended from 0 to 500% was determined using this technique. The variation of surface orientation, bulk crystallinity, and thickness with extension of these uniaxially extended films were compared. The surface orientation of an unoriented and several biaxially oriented polypropylene films was compared to the bulk orientation determined by a similar transmission infrared dichroism method. It was found that surface and bulk orientation were generally similar. It was shown that rather small orientations could be measured by the surface orientation method and that it was applicable to multilayer films and very thick samples, where the transmission method fails.     

Water vapour barrier performance of corn-zein coated polypropylene (PP) packaging films

The novel film structure of corn-zein coated on polypropylene (PP) synthetic film for packaging industry was developed to examine the feasibility of resulting coated films as an alternative water barrier performance for food packaging. The effects of coating formulation (solvent, corn-zein, plasticizer concentration and plasticizer type) on final properties of films were observed. Corn-zein is the most important protein of corn and has good film forming property. Composites structures of PP films coated with corn-zein were obtained through a simple solvent casting method. Polyethylene glycol (PEG) and glycerol (GLY) were used as plasticizer to increase film flexibility. Statistical analysis based on full factorial design was performed to observe coating formulation effects. The high water vapour barriers were obtained for films coated with coating formulation consisting of higher amounts of corn-zein plasticized by GLY. The lower glass transition temperatures (T _g) of films were obtained by plasticization of films and T _g decreased by increasing plasticizer content. The statistical analysis defined the key parameters of coating formulation that had major effects on the final properties of coated PP films as corn-zein, plasticizer concentration and plasticizer type. In conclusion, corn-zein coatings could have potential as an alternative to conventional synthetic polymers used in composite multilayer structures for food packaging applications.     

Three-dimensional packing structure and electronic properties of biaxially oriented poly(2,5-bis(3-alkylthiophene-2-yl)thieno[3,2-b]thiophene) films

We use a systematic approach that combines experimental X-ray diffraction (XRD) and computational modeling based on molecular mechanics and two-dimensional XRD simulations to develop a detailed model of the molecular-scale packing structure of poly(2,5-bis (3-tetradecylthiophene-2-yl)thieno[3,2-b]thiophene) (PBTTT-C(14)) films. Both uniaxially and biaxially aligned films are used in this comparison and lead to an improved understanding of the molecular-scale orientation and crystal structure. We then examine how individual polymer components (i.e., conjugated backbone and alkyl side chains) contribute to the complete diffraction pattern, and how modest changes to a particular component orientation (e.g., backbone or side-chain tilt) influence the diffraction pattern. The effects on the polymer crystal structure of varying the alkyl side-chain length from C(12) to C(14) and C(16) are also studied. The accurate determination of the three-dimensional polymer structure allows us to examine the PBTTT electronic band structure and intermolecular electronic couplings (transfer integrals) as a function of alkyl side-chain length. This combination of theoretical and experimental techniques proves to be an important tool to help establish the relationship between the structural and electronic properties of polymer thin films.     

Fabrication and properties of thermosensitive organic/inorganic hybrid hydrogel thin films

We report on a facile method for fabricating thermosensitive organic/inorganic hybrid hydrogel thin films from a cross-linkable organic/inorganic hydrid copolymer, poly[ N-isopropylacrylamide- co-3-(trimethoxysilyl)propylmethacrylate] [P(NIPAm- co-TMSPMA)]. Fourier transform infrared (FT-IR) spectra confirmed the formation of hybrid hydrogel thin films after hydrolysis of the methoxysilyl groups (Si-O-CH 3) and subsequent condensation of the silanol groups (Si-OH). Atomic force microscopy (AFM) images revealed that the surface morphology of the hydrogel thin films depended on the supporting substrates. Microdomains were observed for the hydrogel thin films on a gold surface, which can be attributed to inhomogeneous network structures. The thermoresponsive swelling-deswelling behavior and the viscoelastic properties of the hydrogel thin films were investigated as a function of temperature (25-45 degrees C) by using a quartz crystal microbalance (QCM) operated in water. The high frequency shear modulus of the P(NIPAm- co-TMPSMA) hydrogel thin films was several hundred kilopascals.     

Structure and electrical properties of undoped oriented poly(phenylene vinylene) films

The influence of anisotropic structure on the electrical properties of undoped oriented poly(phenylene vinylene) (PPV) films was investigated with impedance spectroscopy and structural characterization. The oriented structure of the stretched PPV films was studied with wave-guide coupling and infrared dichroism. It was found that the unstretched PPV film had a highly planar structure, and one-way stretching converted the planar structure into a uniaxial structure. The impedance of undoped PPV thin films was measured along three different directions: through the film thickness direction, parallel to the stretch direction in the film plane, and perpendicular to the stretch direction in the film plane. Two relaxations were observed, one corresponding to the bulk behavior in the high-frequency range and the other to an interfacial contact polarization in the low-frequency range. From equivalent circuit modeling, it was found that the bulk conductivity through the film thickness direction decreased with increasing orientation, whereas the high-frequency dielectric constant through the film direction remained constant. In addition, the conductivities measured in the film plane were at least two orders of magnitude higher than the conductivity in the direction normal to the film surface. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 98–116, 2004     

Synthesis, characterization and photovoltaic properties of a low-bandgap platinum(II) polyyne functionalized with a 3,4-ethylenedioxythiophene-benzothiadiazole hybrid spacer

The synthesis, characterization and optical spectroscopy of a deep blue platinum(II) polyyne functionalized with the (3,4-ethylenedioxythiophene)-benzothiadiazole hybrid spacer (P1) and its dinuclear platinum molecular model complex (M1) are described. This metalated polymer P1 exhibits good thermal stability and possesses a narrow bandgap of 1.76 eV. Optical spectroscopic measurements of these materials reveal a substantial donor-acceptor interaction along the rigid backbone of the organometallic polyynes through the interaction of metal center and the conjugated tricyclic ligand. Preliminary study shows that P1: methanofullerene acceptor blend can be used as an active layer of bulk-heterojunction polymer solar cells. Photoexcitation of this blend layer in some yet-to-be optimized cells results in a photo-induced electron transfer from the π-conjugated metallopolyyne electron donor to [6,6]-phenyl C₆₁-butyric acid methyl ester with a power conversion efficiency (PCE) close to 0.30% under air mass (AM1.5) simulated solar illumination. The power dependencies of the solar cell parameters (including the short-circuit current density, open-circuit voltage, fill-factor and PCE) were also studied.     

Mechanical and conducting properties of polypropylene fibers filled with carbon nanotubes with functionalized surface

A procedure for functionalization of the surface of multiwall carbon nanotubes, based on treatment of the nanofiller with a strong oxidant and 1-hexadecylamine and aimed to improve the compatibility of nanotubes with a polypropylene matrix, was examined. Variation of the mechanical and electrical properties of the composite fiber based on polypropylene in relation to the concentration of the modified nanotubes was studied.     

Thermal and fire stability of cotton fabrics coated with hybrid phosphorus-doped silica films

Hybrid phosphorus-doped silica films have been prepared through sol?Cgel processes to enhance the thermal and fire stability of cotton. To this aim, 3-aminopropyltriethoxysilane and N,N,N??,N??,N??,N??-hexakis-methoxymethyl-[1,3,5]triazine-2,4,6-triamine have been reacted with diethylphosphatoethyltriethoxysilane. FT-IR spectroscopy was exploited for assessing the formation of the silica skeleton on the cotton surface and for evaluating the interactions between the cellulosic fibres and the doped film. The effect of the concurrent presence of Si, P and N on cotton has been investigated by thermogravimetric analyses and the flammability behaviour has been assessed by vertical flammability tests, as well. The sol?Cgel treatments in the presence of phosphorus and nitrogen turned out to play a protective role on the degradation of the cotton fibres, hindering the formation of volatile species that fuel the further degradation and favouring the formation of a carbonaceous structure.     

Synthesis and characterization of amino functionalized ladder-like polysilsesquioxanes and their hybrid films with polyimide

Ladder-like polysilsesquioxanes (LPSQs) with different amino contents have been synthesized by controlling of the dosage of Pd/C catalyst. The concentration and activity of amino groups were investigated by Fourier transform infrared spectroscopy. Polyimide (PI)/LPSQ hybrid films have been prepared by incorporating of the obtained LPSQs with different amino contents into PI matrix, respectively. The interfacial interactions between PI matrix and LPSQ were studied with scanning electron microscopy and X-ray photoelectron spectroscopy, meanwhile the thermal and mechanical properties of the hybrid films were studied using dynamic mechanical analysis and tensile tests. The results indicate that the functionality of LPSQ has great effects on the interfacial interactions and the properties of hybrid films. With the increase of amino content, both the interfacial interactions and the cross-linking density of hybrids enhanced, which results in the decline of surface silicon concentration, increase of Young’s modulus and drop of elongation at break. Excessive amino content makes the hybrid films brittle and leads to incomplete imidization.     

Fabrication and photoluminescence of hybrid organized molecular films of a series of gemini amphiphiles and europium(III)-containing polyoxometalate

Organic/inorganic hybrid monolayers, consisting of an oval decatungstoeuropate (EuW10) with photoluminescence and a series of gemini-type amphiphiles with various lengths of the flexible hydrophobic spacers, were formed through electrostatic interaction at the air/water interface. The ultrathin hybrid multilayer films could be fabricated through the horizontal transfer of the monolayers onto the solid substrates. The characteristic absorption band of EuW10 in the UV spectra of the hybrid films showed a slight red shift in comparison with that in solution, indicating the ordered arrangement of EuW10 in the hybrid films. FT-IR spectra of the hybrid films presented characteristic bands of EuW10, indicating that the structure of the cluster was kept in the films. X-ray diffraction measurements of the films revealed that the well-defined layer structures were formed in these multilayer films and the EuW10 cluster ions were orientated with their short axis parallel to the film surface. Typical photoluminescence of the 5D0 --> 7F2 and 5D0 --> 7F1 transitions of EuW10 was observed in the hybrid films. Interestingly, the relative intensity of the two emission bands varied with the spacer length of the gemini amphiphiles in the films. A size matching between EuW10 and the gemini amphiphile with a hexamethylene spacer was observed, which showed the lowest ratio of the emission intensity of 5D0 --> 7F2 to that of 5D0 --> 7F1. Circular nanoparticles were observed in the AFM images for all these hybrid films. In addition, the size of the formed nanoparticles showed a dependence on the spacer length.     

Preparation and optical properties of novel symmetrical hexadecachlorinatedphthalocyaninato zinc(II) spin coated thin films

Novel symmetrical 1,4,8,11,15,18,22,25-octahexyloxy-2,3,9,10,16,17,23,24-octa-(3,5- dichlorophenoxy)phthalocyaninato zinc(II) was synthesized and characterized by ¹H NMR, ¹³C NMR, MS, UV–Vis, XRD, and IR spectrometry. The synthesized ZnPc complex is soluble in various organic solvents such as CH₂Cl₂, THF, acetone, and ethyl acetate. This property helped to obtain thin films of the new ZnPc complex by spin coating method. The surface morphology of the thin films was investigated by atomic force microscopy, AFM, and showed that the molecules grow in stacks of rows. The spectrophotometric measurements of transmittance (T) and reflectance (R) spectra were carried out in the wavelength range 190–3000 nm.     

Luminescent organoplatinum(II) complexes with functionalized cyclometalated C^N^C ligands: structures, photophysical properties, and material applications

A series of [(R'-C^N^C-R')Pt(L)] complexes with doubly deprotonated cyclometalated R'-C^N^C-R' ligands (R'-C^N^C-R'=2,6-diphenylpyridine derivatives) functionalized with carbazole, fluorene, or thiophene unit(s) have been synthesized and their photophysical properties studied. The X-ray crystal structures reveal extensive intermolecular π···π and C-H···π interactions between the cyclometalated C^N^C ligands. Compared to previously reported cyclometalated platinum(II) complexes [(C^N^C)Pt(L)], which are non-emissive in solution at room temperature, the carbazole-, fluorene- and thiophene-functionalized [(R'-C^N^C-R')Pt(L)] (L=DMSO 1-9, C≡N-Ar, 1a-9a) complexes are emissive in solution at room temperature with λ(max) at 564-619 nm and Φ=0.02-0.26. The emissions of the [(R'-C^N^C-R')Pt(L)] complexes are attributed to electronic excited states with mixed (3)MLCT and (3)IL character. The carbazole/fluorene/thiophene unit(s) allow the tuning of the electronic properties of the [(R'-C^N^C-R')Pt] moiety, with the emission maxima in a range of 564-619 nm. These are the first examples of organoplatinum(II) complexes bearing doubly deprotonated cyclometalated C^N^C ligands that are emissive in solution at room temperature. In non-degassed DMSO, the emission intensities of 6a-9a are enhanced upon exposure to ambient light. This phenomenon is caused by reacting photogenerated (1)O(2) with a DMSO molecule to form dimethyl sulfone, leading to the removal of dissolved oxygen in solution. Self-assembled nanowires and nanorods are obtained from precipitation of 3a in THF/H(2)O and 8a in DMSO/Et(2)O, respectively. The [(R'-C^N^C-R')Pt(L)] complexes are soluble in common organic solvents with a high thermal stability (>300 °C), rendering them as phosphorescent dopants for organic light-emitting diode (OLEDs) applications. Red OLEDs with CIE coordinates of (0.65±0.01, 0.35±0.01) were fabricated from 7a or 8a. A maximum external efficiency (η(Ext)) of 12.6% was obtained for the device using 8a as emitter.     

High oil-repellent poly(alkylpyrrole) films coated with fluorinated alkylsilane by a facile way

Coating of fluorinated alkylsilane on “needle”-like shaped surface of poly(alkylpyrrole) films was carried out by a facile way. The coated film showed contact angles of larger than 150° and 130° to water and salad oil, respectively. The SEM images showed that the geometrical factor of the film surface did not change during the coating. The film also showed excellent stability to heating and organic solvent treatments, in terms of the contact angles to both water and salad oil. The X-ray photospectroscopic (XPS) and infrared spectroscopic (IR) data revealed that thin layer of condensed heptadecafluorodecyltri-iso-propoxylsilane (HDFDTPS) homogeneously covered on the “needle”-like surface of the poly(alkylpyrrole) film even though without any thermal treatment.     

Piezoelectric properties of oriented films of poly(γ-methyl D-glutamate)

The dynamic piezoelectric stress constant e^*₂₅ of drawn films of poly(γ-methyl D -glutamate) (PMDG) cast from solutions in α-helix-promoting solvents 1,2-dichloroethane (DCE) and chloroform and from the nonhelicogenic solvent dichloroacetic acid (DCA) was measured from ?180°C to 200°C at 110 Hz. The drawn and annealed films cast from chloroform show a small peak for the real part of piezoelectric stress constant ?e′₂₅ in the temperature range of the mechanical α₂-crystalline relaxation, which is caused by the distortion motion of the backbone chain of the α-helix. On the other hand, drawn films cast from DCE show the peak of the real part of the piezoelectric stress constant, whose magnitude decreases in the range of the mechanical α₁-crystalline relaxation or the β-relaxation processes, which were previously ascribed, respectively, to mutual slipping of α-helices and to the micro-Brownian motion of disordered regions. Also, ?e′₂₅ becomes virtually zero near 180°C where the α₂-relaxation is located. These results suggest that the polarization change induced by applied strain is caused by distortion of the backbone chains in the α-helix. Near 0°C, the temperature range of the side-chain mechanical relaxation, ?e′₂₅ exhibits a marked peak both for films cast from chloroform and from DCE. The maximum value of ?e′₂₅ and the orientation function of the α-helix axis are linearly related and extrapolation of ?e′_25,max to unit orientation function gives 1.3 × 10⁴ cgs esu which corresponds to 2.4 Debye per residue. This value corresponds reasonably to the value of 3.71 Debye for the permanent dipole moment of NHCO bond if the correction for crystallinity is made. This result also indicates the piezoelectric properties of PMDG arise from distortion of the backbone chain of the α-helix induced by applied strain.     

In situ compatibilizer-reinforced interface between a flexible polymer (a functionalized polypropylene) and a rodlike polymer (a thermotropic liquid crystalline polymer)

We present an investigation of the interfacial reinforcement between a flexible folded-chain polymer (functionalized polypropylene-maleic anhydride-grafted polypropylene, MAPP) and a rodlike polymer (a themotropic liquid crystalline polymer, TCLP - poly(ester amide)). Fracture toughness was measured using an asymmetric double-cantilever beam test (ADCB). High fracture toughness at the bonding temperature of 200 degrees C indicates that a chemical reaction has occurred at the interface to provide a strong interaction between MAPP and TLCP. Despite the higher modulus of TLCP, the fracture was propagated in the TLCP phase because of inherent TLCP domain structure. An analysis on the locus of failure revealed that at constant bonding temperature the fracture toughness between MAPP and TLCP was influenced not only by the bonding temperature but also by the bonding time. The fracture toughness increased with the bonding temperature until 200 degrees C was reached and then decreased at higher bonding temperature. The fracture toughness increased with annealing time until it reached a plateau value. We ascribe the dependence of the fracture toughness on the bonding time to the progressive occurrence of two different failure mechanisms, adhesive failure and cohesive failure. The adhesive strength increased with bonding temperature whereas the cohesive strength decreased because of weaker adhesion between TLCP crystalline domains. The dependence of fracture toughness on bonding time was explained in terms of the TLCP crystalline domain structure.     

Fabrication and characterization of nanostructured titania films with integrated function from inorganic-organic hybrid materials

Nanostructured titania films are of growing interest due to their application in future photovoltaic technologies. Therefore, a lot of effort has been put into the controlled fabrication and tailoring of titania nanostructures. The controlled sol-gel synthesis of titania, in particular in combination with block copolymer templates, is very promising because of its high control on the nanostructure, easy application and cheap processing possibilities. This tutorial review gives a short overview of the structural control of titania films gained by using templated sol-gel chemistry and shows how this approach is extended by the addition of further functionality to the films. Different expansions of the sol-gel templating are possible by the fabrication of gradient samples, by the addition of a homopolymer, by the combination with micro-fluidics and also by the application of novel precursors for low-temperature processing. Moreover, hierarchically structured titania films can be fabricated via the subsequent application of several sol-gel steps or via the inclusion of colloidal templates in a one-step process. Integrated function in the block copolymer used in the sol-gel synthesis allows for the fabrication of an integrated blocking layer or an integrated hole-conductor. Both approaches grant a one-step fabrication of two components of a working solar cell, which make them very promising towards a cheap solar cell production route. Looking to the complete solar cell, the top contact is also of great importance as it influences the function of the whole solar cell. Thus, the mechanisms acting in the top contact formation are also reviewed. For all these aspects, characterization techniques that allow for a structural investigation of nanostructures inside the active layers are important. Therefore, the characterization techniques that are used in real space as well as in reciprocal space are explained shortly as well.     

Redox properties of the ferricyanide ion on electrodes coated with layer-by-layer thin films composed of polysaccharide and poly(allylamine)

Polyelectrolyte multilayer thin films were prepared by an alternate deposition of poly(allylamine hydrochloride) (PAH) and anionic polysaccharides {carboxymethylcellulose (CMC) and alginic acid (AGA)} on the surface of a gold (Au) disk electrode, and the binding of ferricyanide [Fe(CN)(6)](3)(-) and hexaammine ruthenium ions [Ru(NH(3))(6)](3+) to the films was evaluated. Poly(acrylic acid) (PAA) was also employed as a reference polyanion bearing carboxylate side chains. A quartz-crystal microbalance study showed that PAH-CMC and PAH-AGA multilayer films grow exponentially as the number of depositions increases. The thicknesses of five bilayers of (PAH-CMC)(5) and (PAH-AGA)(5) films were estimated to be 150 +/- 20 and 90 +/- 15 nm, respectively, in the dry state. The PAH/polysaccharide multilayer film-coated Au electrodes exhibited a redox response to the [Fe(CN)(6)](3)(-) ion dissolved in solution, irrespective of the sign of the surface charge of the film, suggesting the high permeability of the films to the [Fe(CN)(6)](3)(-) ion. In contrast, the PAH-PAA film-coated Au electrodes exhibited a redox response only when the outermost surface of the film was covered with a positively charged PAH layer. However, the permeation of the [Ru(NH(3))(6)](3+) cation was severely suppressed for all of the multilayer films. It was possible to confine the [Fe(CN)(6)](3)(-) ion in the films by immersing the film-coated electrodes in a 1 mM [Fe(CN)(6)](3)(-) solution for 15 min. Thus, the [Fe(CN)(6)](3)(-)-confined electrodes exhibited a cyclic voltammetric response in the [Fe(CN)(6)](3)(-) ion-free buffer solution. The loading of the [Fe(CN)(6)](3)(-) ion in the films was higher when the surface charge of the film was positive and increased with increasing film thickness. It was also found that the [Fe(CN)(6)](3)(-) ion confined in the films serves as an electrocatalyst that oxidizes ascorbic acid in solution.     

Fabrication and luminescent properties of Eu(BMPPA)3BPy complex and its functionalized silica nanocomposites

Luminescent silica nanocomposites functionalized with a Eu-complex have been prepared and characterized.The europium complex is composed of 2,2'-bipyridyl(BPy) and 2-(4-bromomethyI)-phenylpropionic acid(BMPPA),which contains highly active benzyl bromide substituents and can covalently bind with poly(4-vinylpyridine)(P4VP)-modified silica nanoparticles(nanoSiO_2P4VP) to form nanoSiO_2P4VPEuBPy composites.Microscopic images revealed that the nanoSiO_2P4VPEuBPy composites easily formed aggregates,due to an inter-particle binding caused by the benzyl bromide among the composites.The as-prepared nanocomposites showed the typical emissions of Eu(III) ions at the wavelengths from 580 nm to 750 nm designated to the ~5D_0→~7F_n transitions.Time-resolved fluorescence decay measurements revealed that the emission lifetime was approximately 0.204 ms and 0.576 ms for the nanoSiO_2EuBPy composites,a little shorter than that in the Eu(BMPPA)_3BPy complex.