Hyperbranched polyesters: End group modification and properties

Several hyperbranched polyesters have been prepared in a one-pot polycondensation reaction. Molecular weights, viscosities and rheological behavior of these polymers have been characterized. The influence of their terminal groups on the properties and their behavior in blends will be discussed.     

Hyperbranched bisphosphinoamine ligands: synthesis,characterization and application in ethylene oligomerization

Two hyperbranched bisphosphinoamine (PNP) ligands and chromium complexes were synthesized in good yield with 1.0 generation (1.0 G) hyperbranched macromolecules, chlorodiphenylphosphine (Ph₂PCl) and CrCl₃(THF)₃ as raw materials. The hyperbranched PNP ligands and chromium complexes were characterized by FT-IR, ¹H NMR, ³¹P NMR, UV and ESI-MS. Comparing with the chromium complexes, the hyperbranched PNP ligands, in combination with Cr(III), and activation by methylaluminoxane (MAO) in situ generated species with better catalytic performance for ethylene oligomerization. The effect of solvent, chromium source, ligand/Cr molar ratio, reaction temperature, Al/Cr molar ratio and reaction pressure on the catalytic activity and product selectivity were studied. The results showed that with increase of ligand/Cr molar ratio, reaction temperature and Al/Cr molar ratio, the catalytic activity increased at first and then decreased. However, the catalytic activity continuously increased with increase of reaction pressure. Under the optimized conditions, the catalytic system of hyperbranched PNP/Cr(III)/MAO led to catalytic activity of 2.68 × 10⁵ g/(mol Cr·h) and 37.71% selectivity for C₆ and C₈.     

Hyperbranched macromolecules bridged salicylaldimine cobalt complexes: synthesis,characterization and ethylene oligomerization studies

A series of novel 1.0 generation (1.0G) hyperbranched macromolecules bridged salicylaldimine cobalt complexes were synthesized in high yields. The compounds were characterized by fourier transform infrared (FT-IR) spectroscopy, ultraviolet (UV) visible spectroscopy, electrospray ionization mass spectrometry (ESI–MS), elemental analysis and thermal gravimetric analysis (TGA), as well as were investigated as precatalysts for the oligomerization of ethylene. Upon activation with methylaluminoxane (MAO) and diethylaluminumchloride (DEAC), the cobalt precatalysts showed moderate catalytic activities in the range of 10⁵ g/(mol Co h) in ethylene reactivity with the high selectivity for the butenes and high carbon number olefins products. The correlation between cobalt complexes and their catalytic activities and product distribution were investigated in detail under various reaction parameters. The research results showed that the catalytic activities of precatalysts increased with the increase of ethylene pressure and Al/Co molar ratio; however, the catalytic activities firstly increased and then decreased with the increase of reaction temperature. The highest activity of 2.54 × 10⁵ g/(mol Co h) and 50.18% selectivity of high number carbon olefins was obtained under the reaction temperature of 25 °C, ethylene pressure of 0.5 MPa, and Al/Co molar ratio of 1500. In addition, the nature of solvent and co-catalyst, as well as the structure of precatalysts, significantly affected both the activity and the product distribution of the resultant catalysts.     

Self-assembly of molecular nanoball: design, synthesis, and characterization

The design and self-assembly of two new flexible supramolecular nanoballs are described. These assemblies incorporate two flexible tritopic amide and ester building blocks and were prepared in excellent yields (96-97%) via coordination driven self-assembly. The first resulted from the reaction of 4 equiv of a new tritopic ester ligand N,N',N' '-tris(4-pyridylmethyl) trimesic ester and 3 equiv of C4 symmetric Pd(NO3)2. The second analogous structure was obtained by the self-assembly of a flexible N,N',N' '-tris(3-pyridylmethyl) trimesic amide and Pd(NO3)2. The assemblies were characterized with multinuclear NMR spectroscopy, electrospray ionization mass spectroscopy, elemental analysis, and TGA. Mass spectrometry along with NMR data and TEM view confirms the existence of the two assemblies. MM2 force field simulations of the cages showed a ball shape with the diameter of the inner cavity of about 2.1 and 1.8 nm for 2a and 2b, respectively, which were also corroborated by TEM analysis.     

Hyperbranched polyesters of 3,5‐diacetoxybenzoic acid: A reinvestigation

3,5‐Diacetoxybenzoic acid was polycondensed at temperatures in the range of 200–250 °C either in the absence of a catalyst or with addition of MgO or SnCl₂. The highest molecular weight was obtained in the absence of a catalyst. The matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra revealed the formation of cyclic hyperbranched polyesters. The content of polyesters with cyclic core increased with higher conversions, and thus, with higher molecular weights. Furthermore, a loss of acetyl groups was found to be a significant side reaction. The same side reactions were found when trimethylsilyl 3,5‐bisacetoxybenzoate was polycondensed at 280 or 310 °C. Model reactions concerning the deacetylation mechanism were performed and the results are discussed. Size exclusion chromatography measurements in two different solvents proved that the high‐molecular‐weight fraction is not the result of aggregation via hydrogen bonds. Yet, the nature of the solvent, the profile of the columns, and the character of the detector had a significant influence on the shape of the elution curves and on the apparent molecular weights. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3751–3760, 2004     

Thermotropic main chain liquid crystalline polyesters containing ferrocene and phosphate units: synthesis and characterization

A new series of liquid crystalline main chain copolyesters were prepared, having ferrocene in the mesogenic segment and a methyl phosphate group along with a methylene spacer. The even numbered methylene groups were varied from two to ten. Liquid crystalline behaviour was investigated on a hot stage optical polarized microscope. Thermal properties of the polymers were analysed by TGA and DSC, revealing that the polymers yield high char products, probably caused by the formation of phosphorus and iron oxides. The glass transition (T_g) temperatures of the polymers were found to be fairly low, the result of the incorporation of bulky phosphorus and ferrocene moieties in the chain. The phase behaviour was analysed and correlated with the structure of the polymers. The liquid crystalline textures of the polymers became more transparent with increasing spacer length. Energy minimized structures for the polymer repeating units reveal that both the ferrocene and phosphorus moieties produce more molecular entanglement, thus reducing the T_g and T_m of the polymers.     

Thermotropic main chain liquid crystalline polyesters containing ferrocene and phosphate units: synthesis and characterization

A new series of liquid crystalline main chain copolyesters were prepared, having ferrocene in the mesogenic segment and a methyl phosphate group along with a methylene spacer. The even numbered methylene groups were varied from two to ten. Liquid crystalline behaviour was investigated on a hot stage optical polarized microscope. Thermal properties of the polymers were analysed by TGA and DSC, revealing that the polymers yield high char products, probably caused by the formation of phosphorus and iron oxides. The glass transition (T _g) temperatures of the polymers were found to be fairly low, the result of the incorporation of bulky phosphorus and ferrocene moieties in the chain. The phase behaviour was analysed and correlated with the structure of the polymers. The liquid crystalline textures of the polymers became more transparent with increasing spacer length. Energy minimized structures for the polymer repeating units reveal that both the ferrocene and phosphorus moieties produce more molecular entanglement, thus reducing the T _g and T _m of the polymers.     

An energy efficient and facile synthesis of high molecular weight polyesters using ketenes

A facile, ketene-based strategy for the synthesis of polyesters from stable Meldrum's acid monomers has been developed which overcomes many issues associated with traditional step-growth procedures. A significant increase in polymerization efficiency is observed with only 10 min reaction time at 220 °C being needed to obtain high molecular weight polymers.     

Hyperbranched polycarbosiloxane with dendritic boron cores: Synthesis,characterization, and structure regulation

The synthesis, characterization, and structure regulation of hyperbranched polycarbosiloxane with dendritic boron cores were realized in this paper. First, dendritic boron core was synthesized via hydroboration with borane dimethylsulfide and bis(allyloxy)dimethylsilane. Then, the hyperbranched polycarbosiloxanes with dendritic boron cores were synthesized via hydrosilylation with AB₂ type monomer of bis(allyloxy)methylsilane and dendritic boron cores. The molecular structures of the dendritic boron core and resulting hyperbranched polymers were characterized by using Fourier transform infrared spectroscopy, ¹H nuclear magnetic resonance, and ¹³C nuclear magnetic resonance spectroscopies. Size exclusion chromatography/multiangle laser light scattering analysis reveals that the structures of hyperbranched polycarbosiloxane can be regulated effectively by incorporation of functional dendritic boron cores. Compared with hyperbranched polycarbosiloxane of the same molecular weight level, the hyperbranched polycarbosiloxane with dendritic boron cores presents narrower molecular weight distribution as well as much smaller hydrodynamic radius and intrinsic viscosity. Thermalgravimetric analyzer analysis indicates that both the decomposition temperature and ceramic yields are increased as the results of the incorporation of dendritic boron cores into hyperbranched polycarbosiloxane. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3930–3941, 2006     

Discrete half-sandwich Ir, Rh-based organometallic molecular boxes: synthesis, characterization, and their properties

The treatment of binuclear complexes [Cp*(2)M(2)(μ-QA)Cl(2)] (M = Ir, 2a; M = Rh, 2b) (H(2)QA = 1,4-dihydroxyanthraquinone) with pyrazine or bifuncational pyridyl-based ligands (4,4'-dipyridine (bpy), E-1,2-bis(4-pyridyl)ethene (bpe), 2,5-bis(4-pyridyl)-1,3,4-oxadiazole (bpo), and 2,5-bis(4-pyridyl)-1,3,4-thiadiazol (bpt)) in the presence of AgOTf (OTf = CF(3)SO(3)) in CH(3)OH, gave the corresponding tetra-nuclear complexes, with a general formula of [Cp*(4)M(4)(μ-QA)(2)(μ-L)(2)](OTf)(4) (M = Ir, 3a-7a; M = Rh, 3b-7b), respectively. The molecular structure of [Cp*(4)Ir(4)(μ-QA)(2)(μ-pyrazine)(2)](OTf)(4) (3a) has been determined by single-crystal X-ray analysis, revealing that the metal centers were connected by pyrazine and bis-bidentate QA(2-) ligands to construct a rectangular cavity with the dimension of 7.30 × 8.41 × 6.92 ?. Complexes 3a and 3b were found to exhibit selective trapping of halocarbons properties.     

Photoactive,liquid‐crystalline,hyperbranched benzylidene polyesters: Synthesis and characterization

A novel photoactive, liquid‐crystalline, hyperbranched benzylidene polyester (PAHBP) was synthesized from a dilute solution of an A₂ photoactive monomer [bis(4‐hydroxybenzylidene)‐4‐phenyl cyclohexanone] and a B₃ monomer (1,3,5‐benzene tricarboxylic acid chloride) by the solution polycondensation method in the presence of pyridine as a condensing agent. PAHBP was thoroughly characterized by Fourier transform infrared, ¹H and ¹³C NMR, ultraviolet–visible spectrometry, and gel permeation chromatography. The inherent viscosity of the polymer was 0.35 dL/g in tetrahydrofuran. The degree of branching was 0.53, which confirmed the branched architecture of the polymer. Furthermore, thermogravimetric analysis, differential scanning calorimetry, and polarized optical microscopy were used to examine the thermal stability and thermotropic liquid‐crystalline properties of the hyperbranched polyester. The polymer exhibited a nematic mesophase over a wide range of temperatures. The photoreactivity of PAHBP was studied by photolysis under ultraviolet light. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 53–61, 2006     

Methylene-bridged aromatic polyesters. Synthesis,characterization, and radiation-induced crosslinking

Aromatic polyesters connected by methylene groups were synthesized. Two pairs of aromatic diacid chlorides, 3,3′-methylenedibenzoyl chloride and 4,4′-methylenedibenzoyl chloride were each polymerized via interfacial polycondensation with 2,2-bis(4-hydroxyphenyl)propane (bisphenol A), 3,3′-methylenediphenol, and 4,4′-methylenediphenol. For comparison, 3,3′-carbonyldibenzoyl chloride and 4,4′-carbonyldibenzoyl chloride were similarly polymerized with bisphenol A. Substitution of meta,meta' oriented phenylene groups for para,para' oriented phenylene groups had a significant and cumulative effect in reducing the glass transition temperatures of the polymers, thereby enhancing their processability. In air the methylene groups of the polyesters undergo oxidation and crosslinking at elevated temperatures. Electron beam irradiation of thin films of the methylene-linked polyesters at room temperature resulted in some chain extension and crosslinking, as evidenced by increased solution viscosity and gel formation. Irradiation at a temperature near or above the glass transition temperatures of the polymers greatly enhanced the tendency for the polymers to crosslink.     

Hyperbranched aromatic poly(ether imide)s: Synthesis,characterization, and modification

The synthesis and characterization of hyperbranched aromatic poly(ether imide)s are described. An AB₂ monomer, which contained a pair of phenolic groups and an aryl fluoro moiety activated toward displacement by the attached imide heterocyclic ring, was prepared. The nucleophilic substitution of the fluoride with the phenolate groups led to the formation of an ether linkage and, subsequently, to the hyperbranched poly(ether imide), which contained terminal phenolic groups. A similar one‐step polymerization involving a monomer that contained silyl‐protected phenols yielded a hyperbranched poly(ether imide) with terminal silylated phenols. The degree of branching of these hyperbranched polymers was approximately 55%, as determined by a combination of model compound studies and ¹H NMR integration experiments. End‐capping reactions of the terminal phenolic groups were readily accomplished with a variety of acid chlorides and acid anhydrides. The nature of the chain‐end groups significantly influenced physical properties, such as the glass‐transition temperature and the solubility of the hyperbranched poly(ether imide)s. As the length of the acyl chain of the terminal ester groups increased, the glass‐transition temperature value for the polymer decreased, and the solubility of the polymer in polar solvents was reduced, becoming more soluble in nonpolar solvents. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2536–2546, 2001     

Design,synthesis, and characterization of main‐chain,aromatic polyesters based on 3,4‐ethylenedioxythiophene

A series of new thermoplastic polyesters based on 3,4‐ethylenedioxythiophene (EDOT) with flexible aliphatic spacers have been synthesized and characterized for the first time. The thermal properties of these polyesters based on EDOT are comparable to those of conventional polyesters based on the 1,4‐phenyl unit, indicating that EDOT is a viable replacement for the phenyl units. The glass‐transition and melting‐transition temperatures decrease monotonically with an increase in the spacer length. Theoretical calculations have revealed that the core angle for EDOT is comparable to that of unsubstituted thiophene and hence should be compatible with the formation of the mesophase. This has been confirmed experimentally by the synthesis of a main‐chain, thermotropic, liquid‐crystalline polyester based on EDOT that exhibits fluid birefringence. In fact, this is the first report in which a main‐chain, liquid‐crystalline polymer based on 3,4‐disubstituted thiophene has been successfully designed and synthesized. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3479–3486, 2006     

NMR characterization of biodegradable polyesters

Biodegradable polyesters obtained by fermentation of Alcaligenes eutrophus are characterized with the aid of H, D, C NMR spectroscopy. Copolymers of 3-hydroxybutyrate and 3-hydroxyvalerate are Bernoullian or mixture of two Bernoullian copolymers depending on fermentation conditions. The reverse reaction was found in the reaction catalyzed by beta-ketothiolase during biosynthetic pathway. The fractional population of gauche and trans conformers around the skeletal CH-CH₂ bond is 0.6:0.4 for both poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in chloroform. This result suggests the possibility of formation of isomorphic crystals between copolymers with different composition ratios.     

Facile synthesis of aliphatic hyperbranched polyesters based on diethyl malonate and their irreversible molecular encapsulation

Synthesis of diethyl malonate based wholly aliphatic hyperbranched polyesters having suitable polar matrix for irreversible molecular encapsulation is carried out for the first time.     

Pt-tetraethynylethene molecular scaffolding: synthesis and characterization of a novel class of organometallic molecular rods

The series of monodisperse Pt-bridged TEE oligomers 3a-f was prepared by oxidative Glaser-Hay oligomerization of monomer 7 under end-capping conditions. These novel molecular rods extend in length from 3.3 nm (monomeric 3a) to 12.1 nm (hexameric 3 f). Their isolation was achieved by high performance gel permeation chromatography (GPC), and their purification was best monitored by analytical GPC in combination with matrix-assisted laser-desorption-ionization mass spectrometry (MALDI-TOF MS). The mass spectra of each oligomer revealed the molecular ion or its sodium complex as parent ion together with a clean, highly characteristic fragmentation pattern. Delayed addition of the end-capping reagent PhC(triple bond)CH to the oligomerization mixture afforded polymer 10 with an average of approximately 32 repeat units and a remarkably narrow molecular weight distribution (Mw/Mn=1.06), which is indicative of a living polymerization process. UV/Vis spectral data as well as measurements of the second hyperpolarizability gamma by third harmonic generation (THG) revealed a nearly complete lack of pi-electron delocalization along the oligomeric backbone. The Pt atoms act as true insulating centers, and the Pt-C(sp) bonds hardly possess any pi character. The synthesis of the molecular rods 3a-f provides another demonstration of the power of oxidative acetylenic homocouplings for the preparation of unusual nanoarchitecture.     

Self-assembly of neutral and cationic PdII organometallic molecular rectangles: synthesis, characterization and nitroaromatic sensing

Design and synthesis of three novel [2 + 2] self-assembled molecular rectangles 1-3via coordination driven self-assembly of predesigned Pd(ii) ligands is reported. 1,8-Diethynylanthracene was assembled with trans-Pd(PEt(3))(2)Cl(2) in the presence of CuCl catalyst to yield a neutral rectangle 1via Pd-C bond formation. Complex 1 represents the first example of a neutral molecular rectangle obtained via C-Pd coordination driven self-assembly. A new Pd(2)(II) organometallic building block with 180° bite-angle 1,4-bis[trans-(ethynyl)Pd(PEt(3))(2)(NO(3))]benzene (M(2)) containing ethynyl functionality was synthesized in reasonable yield by employing Sonagashira coupling reaction. Self-assembly of M(2) with two organic clip-type donors (L(2)-L(3)) afforded [2 + 2] self-assembled molecular rectangles 2 and 3, respectively [L(2) = 1,8-bis(4-pyridylethynyl)anthracene; L(3) = 1,3-bis(3-pyridyl)isophthalamide]. The macrocycles 1-3 were fully characterized by multinuclear NMR and ESI-MS spectroscopic techniques, and in case of 1 the structure was unambiguously determined by single crystal X-ray diffraction analysis. Incorporation of Pd-ethynyl bonds helped to make the assemblies π-electron rich and fluorescent in nature. Complexes 1-2 showed quenching of fluorescence intensity in solution in presence of nitroaromatics, which are the chemical signatures of many commercially available explosives.     

Tetrahedranyllithium: synthesis, characterization, and reactivity

The first representative of stable tetrahedranyl anion, tris(trimethylsilyl)tetrahedranyllithium (3), has been synthesized by the reaction of tetrakis(trimethylsilyl)tetrahedrane (2) with methyllithium in tetrahydrofuran. The structural characterization of the tetrahedranyllithium has been achieved by X-ray crystallography, showing that the structure of 3.(TMEDA)1.5 represents a stretched tetrahedron. The endocyclic C(Li)-C(SiMe3) bond lengths range from 1.5408(15) to 1.5441(15) A (av 1.5425(15) A), and are longer than the endocyclic C(SiMe3)-C(SiMe3) bond lengths, which range from 1.4961(15) to 1.5009(15) A (av 1.4986(15) A). Methyl- and hydrogen-substituted tetrahedranes have also been prepared by the reaction of 3 with dimethyl sulfate and cyclopentadiene, respectively.