氯铝酸室温离子液体介质中Blanc氯甲基化反应的研究

在卤化1－烷基吡啶，1－甲基－3－烷基咪唑季胺盐和盐酸三甲胺与无水 AlCl3构成的氯铝酸室温离子液体反应介质中，尝试了苯及其衍生物和氯甲醚的 Blanc氯甲基化反应。结果表明底物的不同对反应有较大影响，苯与氯甲醚反应主 要生成氯甲基化产物，而烷基苯与氯甲醚反应则主要生成二苯基甲烷衍生物。反应 具有适中至高的转化率和选择性，依据底物的不同，反应结束后可以和离子液体系 分层，便于产物分离。氯铝酸离子液体具有一定的重复使用性。     

复合离子液体碳四烷基化技术开发与应用

碳四烷基化油是车用汽油的理想调和组分,其在汽油中的调和比例伴随汽油质量标准的升级而不断提升.中国石油大学(北京)从2000年开始选定氯铝酸离子液体碳四烷基化研究方向,逐步完成了催化剂研发、离子液体碳四烷基化技术开发与工业示范.研究了氯铝酸离子液体的组成、结构及其催化性能之间的关系,设计合成了兼具高活性和高选择性的复合离子液体催化剂.研究了复合离子液体催化剂的失活机理,开发了催化剂再生方案以及氯铝酸离子液体Lewis酸活性的监控方法,在中试装置上进行了2个月的长周期运行试验,初步完成了复合离子液体碳四烷基化技术的工艺开发.研发了新型的静态混合反应器与旋液分离器,设计建成了包含原料处理、烷基化反应、催化剂再生、产品分离与精制4个系统的工业装置,并获得了优异的工业运行结果.复合离子液体碳四烷基化技术实现了产品和工艺的双绿色化,有着良好的应用前景和推广价值.     

Cu对离子液体异丁烷/丁烯烷基化反应选择性的影响研究

合成并表征了[BMIm]Cl-1.8AlCl3-0.5CuCl、[Et3NH]Cl-1.8AlCl3/CuAlCl4等离子液体,考察了含Cu离子液体等酸性催化剂中的异丁烷/丁烯烷基化反应,研究了Cu对离子液体烷基化选择性的影响。结果表明,Cu的引入对离子液体酸性的影响较小,不是反应选择性提高的主要原因,而烷基化过程中CuAlCl5-/CuAlCl4等配合物的存在,以及它们对2-丁烯的络合吸附是改善离子液体催化选择性的关键因素。相同反应条件下,[Et3NH]Cl-1.8AlCl3/CuAlCl4、[BMIm]Cl-1.8AlCl3/CuAlCl4等催化剂的三甲基戊烷选择性最高可达87.5%(质量分数),产物辛烷值100.5,明显优于硫酸、常规氯铝酸离子液体和复合离子液体等烷基化汽油辛烷值。     

复合离子液体催化碳四烷基化反应性的研究

合成了一种新型的酸性离子液体催化剂——复合离子液体,该离子液体的阴离子具有双金属的配位中心。同时,研究了复合离子液体催化异丁烷与丁烯烷基化反应的规律。结果表明,在搅拌速率大于1500r/min,反应低于20℃,烃酸比2∶1~3∶1,烷烯比大于15,反应停留5min~10min,使用丁烯-2为碳四烯烃反应原料下,复合离子液体催化碳四烷基化所得烷基化油的研究法辛烷值（RON）最高可达100以上,明显优于常规氯铝酸离子液体催化所得烷基化油的质量。     

基于实时直接分析质谱技术的氯铝酸及其复合离子液体分析

经氯化亚铜改性的氯铝酸复合离子液体是碳四烷基化反应的优良催化剂,具有很高的催化活性和目标产物选择性.深入解析离子液体的组成、阴阳离子的形态及改性金属对酸中心结构的影响有助于烷基化反应机理的研究及催化剂的定向设计.首先,本工作开发了实时直接分析离子化方法,实现了氯铝酸及其复合离子液体的有效电离和直接分析.其次,通过与静电场轨道阱高分辨质谱联用、同位素峰法指认、多级质谱结构解析等对离子液体组成进行了准确表征,确定了酸性阴离子的存在形态,并明确鉴别出复合离子液体中Cu(Ⅰ)-Al(Ⅲ)双金属配位中心阴离子的存在.进而,借助高能碰撞解离技术对双金属配位中心阴离子[CuAlCl_5]~-和[CuAl_2Cl_8]~-的结构进行了解析.最后,依据质谱分析结果对复合离子液体的卓越催化性能进行了构效关系分析.本研究为Cu(Ⅰ)-Al(Ⅲ)双金属配位中心对复合离子液体优异催化活性的贡献提供了可靠依据,为深入研究复合离子液体催化碳四烷基化反应机理奠定了基础.     

氯铝酸离子液体介质中醚化反应的研究

 在1－烷基吡啶、1－甲基－3－烷基咪唑季铵盐或盐酸三甲铵与无水AlCl3构成的室温离子液体反应介质中，尝试进行了叔丁醇的醚化反应．结果表明，在中性或碱性氯铝酸离子液体中，叔丁醇与甲醇、乙醇、丙醇、丁醇或戊醇在80～140℃反应6～12h，可以得到较高的醇转化率和醚选择性，而且产物叔丁基醚和离子液体系分层，便于分离．     

离子液体催化甲苯选择性羰基化反应合成对甲基苯甲醛

 考察了卤化1-甲基-3-丁基咪唑氯铝酸盐类室温离子液体对甲苯选择性羰基化反应合成对甲基苯甲醛的催化性能. 采用乙腈探针红外光谱法测定了离子液体的酸类型(Brnsted/Lewis酸),并指示了离子液体的Lewis酸强度. 研究了离子液体的酸强度、反应温度、反应时间和CO压力的影响. 结果发现,该类离子液体对甲苯选择性羰基化反应的催化活性明显高于传统的B-L复合液体酸类和固体超强酸类催化剂; 使用离子液体催化剂显著地提高了甲苯选择性羰基化合成对甲基苯甲醛的产率,简化了产物与催化剂的分离. 当控制反应温度为50 ℃, CO压力为4.0 MPa, 反应时间为4 h时, ［bmim］Br/AlCl3催化甲苯的转化率可达96%,目标产物对甲基苯甲醛的产率达86%.     

离子液体超酸清洁催化苯的烷基化反应

研究了在具有Lewis酸性的离子液体体系中进行的苯与烯烃及卤代烃的烷基化反应.以氯化1-甲基-3-乙基咪唑(MEIC)、氯化1-丁基吡啶(BPC)、氯化l-甲基-3-丁基咪唑(MBIC)及盐酸三甲胺(TMHC)季铵盐分别与AlCl3原位合成法制备离子液体催化体系.结果表明:以上各种离子液体均有很高的催化活性,反应转化率在较短的时间内达到100%.其中TMHC-A1Cl3离子液体单烷基化选择性达98.6%.与AlCl3相比,催化活性显著提高,生成烷基化产物不溶于离子液体,因而易于分离,催化剂可重复使用.     

离子液体中1—苯基—1—二甲苯基乙烷的清洁催化合成

研究了在1-甲基-3-烷基咪唑、1-烷基吡啶及盐酸三甲胺季胺盐与无水AlCl3组成的室温离子液体系中,二甲苯与苯乙烯的烷基化反应制1-苯基-1-二甲苯基乙烷及其衍生物。对离子液体催化剂量和反应条件对产物组成级副产物数量的影响进行了考察。结果表明,离子液反应体系中存在着烷基化与异构化两个不同的反应阶段。该体系具有很好的催化性能,反应可在常温下进行,且产物易于分离、纯度高,催化剂可以重复使用。     

离子液体的酸性测定及其催化的二苯醚／十二烯烷基化反应

 采用乙腈探针红外光谱法测定了［bmim］Cl／AlCl3类离子液体的酸性．结果表明，乙腈可以区分离子液体的酸类型（Bronsted酸或Lewis酸），同时可以指示离子液体的Lewis酸强度．使用［bmim］Cl／AlCl3类离子液体催化二苯醚与十二烯的烷基化反应，研究了离子液体的酸强度、反应温度和醚烯比对反应的影响，并与AlCl3催化体系进行对比．结果发现，该离子液体对二苯醚与十二烯烷基化反应的催化活性明显高于AlCl3．使用离子液体作催化剂显著提高了烷基化反应的产率，简化了产物的分离与提纯，且对环境友好．当控制反应温度为80℃，原料醚烯摩尔比为7，并采用酸强度适中的离子液体时，目标产物单十二烷基二苯醚的产率接近90％．     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.