颗粒在黏弹性流体扩张和收缩流中沉降的格子Boltzmann模拟分析

对于Oldroyd-B型黏弹性流体,本文应用格子Boltzmann方法(LBM),实现了流体在二维1:3扩张流道及3:1收缩流道中流动的数值模拟,获得了黏弹性流体在扩张和收缩流道中的流场分布．结合颗粒的受力和运动规则,基于点源颗粒模型,数值分析了颗粒在扩张流和收缩流中的沉降过程和特征,讨论了颗粒相对质量和起始位置以及雷诺数Re和威森伯格数Wi对颗粒沉降特征的影响．结果表明,颗粒相对质量和起始位置以及Re对颗粒沉降轨迹和落点影响较大,而Wi的影响则较小．     

黏弹性流体扩展及收缩流动的格子Boltzmann模拟分析

本文应用格子Boltzmann 方法(LBM)并结合Oldroyd-B 模型,讨论了不可压缩的 Navier-Stokes 方程和平流扩散本构方程的解耦及各自求解方法,以及两类问题的边界处理格式,实现了黏弹性流体在二维1:3 扩展流道以及3:1 收缩流道中的流动的数值模拟．获得了不同雷诺数Re 和维森伯格数Wi 以及黏度vs 下流动的流线分布,计算给出了漩涡的涡心位置和大小,并分析了参数Re、Wi 和vs 对流动特点的影响．模拟结果表明本文所采用模型和边界处理方法具有良好的精度和稳定性．     

Lattice Boltzmann simulations of viscoplastic fluid flows through complex flow channels

We present the results of lattice Boltzmann (LB) simulations for the planar-flow of viscoplastic fluids through complex flow channels. In this study, the Bingham and Casson model fluids are covered as viscoplastic fluid. The Papanastasiou (modified Bingham) model and the modified Casson model are employed in our LB simulations. The Bingham number is an essential physical parameter when considering viscoplastic fluid flows and the modified Bingham number is proposed for modified viscoplastic models. When the value of the modified Bingham number agrees with that of the “normal” Bingham number, viscoplastic fluid flows formulated by modified viscoplastic models strictly reproduce the flow behavior of the ideal viscoplastic fluids. LB simulations are extensively performed for viscoplastic fluid flows through complex flow channels with rectangular and circular obstacles. It is shown that the LB method (LBM) allows us to successfully compute the flow behavior of viscoplastic fluids in various complicated-flow channels with rectangular and circular obstacles. For even low Re and high Bn numbers corresponding to plastic-property dominant condition, it is clearly manifested that the viscosity for both the viscoplastic fluids is largely decreased around solid obstacles. Also, it is shown that the viscosity profile is quite different between both the viscoplastic fluids due to the inherent nature of the models. The viscosity of the Bingham fluid sharply drops down close to the plastic viscosity, whereas the viscosity of the Casson fluid does not rapidly fall. From this study, it is demonstrated that the LBM can be also an effective methodology for computing viscoplastic fluid flows through complex channels including circular obstacles.     

Pressure-driven and electroosmotic non-Newtonian flows through microporous media via lattice Boltzmann method

The lattice Boltzmann method is developed to simulate the pressure-driven flow and electroosmotic flow of non-Newtonian fluids in porous media based on the representative elementary volume scale. The flow through porous media was simulated by including the porosity into the equilibrium distribution function and adding a non-Newtonian force term to the evolution equation. The non-Newtonian behavior is considered based on the Herschel–Bulkley model. The velocity results for pressure-driven non-Newtonian flow agree well with the analytical solutions. For the electroosmotic flow, the influences of porosity, solid particle diameter, power law exponent, yield stress and electric parameters are investigated. The results demonstrate that the present lattice Boltzmann model is capable of modeling non-Newtonian flow through porous media.     

基于格子Boltzmann方法的挤出胀大的数值模拟

将单相格子Boltzmann方法(lattice Boltzmann method, LBM)引入到粘弹流体的瞬态挤出胀大的数值模拟中,建立了基于双分布函数的自由面粘弹性流动格子Boltzmann模型．分析得到的流道中流动速度分布和构型张量结果与理论解十分吻合．对粘弹流体瞬态挤出胀大过程进行了模拟,并分析了运动粘度比和剪切速率对挤出胀大率的影响,得到的胀大率结果与理论分析和其它模拟结果基本一致．表明给出的LBM可以捕捉挤出胀大的瞬态效应．     

A Lattice Boltzmann model with high Reynolds number in the presence of external forces to describe microfluidics

We present here a lattice Boltzmann model with high Reynolds number in the presence of external force fields to describe electrokinetic phenomena in microfluidics, by considering pressure as the only external force for liquid flow. Our results from a 9-bit square lattice Boltzmann model are in excellent agreement with experimental data in pressure-driven microchannel flow that could not be fully described by electrokinetic theory. The difference between the predicted and experimental Reynolds numbers from pressure gradients are well within 5%. Our results suggest that the lattice Boltzmann model described here is an effective computational tool to predict the more complex microfluidic systems that might be problematic using conventional methods.     

Simplified lattice Boltzmann method for non-Newtonian power-law fluid flows

In this paper, we present a simplified lattice Boltzmann method for non-Newtonian power-law fluid flows. The new method adopts the predictor-corrector scheme and reconstructs solutions to the macroscopic equations recovered from the lattice Boltzmann equation through Chapman-Enskog expansion analysis. The truncated power-law model is incorporated into this method to locally adjust the physical viscosity and the associated relaxation parameter, which recovers the non-Newtonian behaviors. Compared with existing non-Newtonian lattice Boltzmann models, the proposed method directly evolves the macroscopic variables instead of the distribution functions, which eliminates the intrinsic drawbacks like high cost in virtual memory and inconvenient implementation of physical boundary conditions. The validity of the method is demonstrated by benchmark tests and comparisons with analytical solution or numerical results in the literature. Benchmark solutions to the three-dimensional lid-driven cavity flow of non-Newtonian power-law fluid are also provided for future reference.     

Numerical rheometry of bulk materials using a power law fluid and the lattice Boltzmann method

In the present study, the flow of bulk materials is characterised as a non-Newtonian fluid and modelled using the lattice Boltzmann method. A power law and a Bingham model is implemented in the LBM, which is hydrodynamically coupled to the discrete element method (DEM) for structural interaction. The performance of both non-Newtonian models is assessed, both qualitatively and quantitatively, in benchmark problems. The validated, non-Newtonian LBM–DEM framework is then applied to the geometry of a cylindrical Couette rheometer to numerically determine the constitutive response of a sample of Leighton Buzzard sand. The numerical results, which employ the power law, are compared with experimental data, and a number of other synthetic soil samples are defined using the presented process of numerical rheometry. Finally, the numerical stress–strain rate response of the synthetic soil samples is interpreted within the context of a regularised Bingham model, and the similarities discussed.     

基于格子Boltzmann两相模型的粘弹流体挤出胀大分析

挤出胀大的数值模拟是非牛顿流体研究中具有挑战性的问题．本文运用格子Boltzmann方法(LBM)分析Oldroyd-B和多阶松弛谱PTT粘弹流体的挤出胀大现象,采用颜色模型模拟出口处粘弹流体和空气的两相流动,通过重新标色获得两种流体的界面,并最终获得胀大的形状．Navier-Stokes方程和本构方程的求解采用双分布函数模型．将胀大的结果与解析解、实验解和单相自由面LBM结果进行了比较,发现格子Boltzmann两相模型结果与解析解和实验结果相吻合,相比于单相模型,收敛速度更快,解的稳定性更高．研究了流道尺寸对胀大率的影响,并对挤出胀大的内在机理进行了分析．     

幂律流体圆柱绕流的格子波尔兹曼模拟简

基于插值补充格子波尔兹曼方法和幂律流体的本构方程,建立了贴体坐标系下适用于幂律流体的格子波尔兹曼模型,模拟了幂律流体的圆柱绕流问题,采用非平衡外推格式处理圆柱表面的速度无滑移边界,利用应力积分法确定曳力系数和升力系数,并与基于标准的格子波尔兹曼方法和有限容积法获得的数值数据进行对比,吻合良好. 进行了网格无关性验证之后,分析了稳态流动时,不同雷诺数下幂律指数对于尾迹长度、分离角、圆柱表面黏度分布、表面压力系数及曳力系数的影响,以及非定常流动中,幂律指数对于流场、曳力系数、升力系数和斯特劳哈尔数的影响. 获得的变化规律与基于其他数值模拟方法得到的结果相一致,充分验证了模型的有效性和正确性. 结果表明：插值补充格子波尔兹曼方法可以用来模拟幂律流体在具有复杂边界流场内的流动问题,通过引入不同的非牛顿流体本构方程,该方法还可以进一步应用于其他类型的非牛顿流体研究中.     

幂律流体圆柱绕流的格子波尔兹曼模拟

基于插值补充格子波尔兹曼方法和幂律流体的本构方程,建立了贴体坐标系下适用于幂律流体的格子波尔兹曼模型,模拟了幂律流体的圆柱绕流问题,采用非平衡外推格式处理圆柱表面的速度无滑移边界,利用应力积分法确定曳力系数和升力系数,并与基于标准的格子波尔兹曼方法和有限容积法获得的数值数据进行对比,吻合良好. 进行了网格无关性验证之后,分析了稳态流动时,不同雷诺数下幂律指数对于尾迹长度、分离角、圆柱表面黏度分布、表面压力系数及曳力系数的影响,以及非定常流动中,幂律指数对于流场、曳力系数、升力系数和斯特劳哈尔数的影响. 获得的变化规律与基于其他数值模拟方法得到的结果相一致,充分验证了模型的有效性和正确性. 结果表明:插值补充格子波尔兹曼方法可以用来模拟幂律流体在具有复杂边界流场内的流动问题,通过引入不同的非牛顿流体本构方程,该方法还可以进一步应用于其他类型的非牛顿流体研究中.      

粘弹流体轴对称流动的格子Boltzmann方法

基于BGK碰撞模型，通过在迁移方程中引入作用力项，建立了粘弹流体的轴对称格子Boltzmann模型．通过Chapman-Enskog展开，获得了准确的柱坐标下轴对称宏观流动方程．采用双分布函数对运动方程和本构方程进行迭代求解，模拟分析了粘弹流体管道流动，获得了流场中的速度和构型张量的分布，通过与解析解进行比较，验证了模型的准确性．研究了作为粘弹流体流动基准问题的收敛流动，对涡旋位置进行了定量分析，将回转长度的计算结果与有限体积法进行了比较，两种数值结果十分吻合．研究结果表明，模型能够准确表征粘弹流体的轴对称流动，具有较广阔的应用前景．     

Application of the lattice‐Boltzmann method to study flow and dispersion in channels with and without expansion and contraction geometry

The lattice‐Boltzmann (LB) method, derived from lattice gas automata, is a relatively new technique for studying transport problems. The LB method is investigated for its accuracy to study fluid dynamics and dispersion problems. Two problems of relevance to flow and dispersion in porous media are addressed: (i) Poiseuille flow between parallel plates (which is analogous to flow in pore throats in two‐dimensional porous networks), and (ii) flow through an expansion–contraction geometry (which is analogous to flow in pore bodies in two‐dimensional porous networks). The results obtained from the LB simulations are compared with analytical solutions when available, and with solutions obtained from a finite element code (FIDAP) when analytical results are not available. Excellent agreement is found between the LB results and the analytical/FIDAP solutions in most cases, indicating the utility of the lattice‐Boltzmann method for solving fluid dynamics and dispersion problems. Copyright © 1999 John Wiley & Sons, Ltd.     

A lattice Boltzmann fictitious domain method for modeling red blood cell deformation and multiple‐cell hydrodynamic interactions in flow

To model red blood cell (RBC) deformation and multiple‐cell interactions in flow, the recently developed technique derived from the lattice Boltzmann method and the distributed Lagrange multiplier/fictitious domain method is extended to employ the mesoscopic network model for simulations of RBCs in flow. The flow is simulated by the lattice Boltzmann method with an external force, while the network model is used for modeling RBC deformation. The fluid–RBC interactions are enforced by the Lagrange multiplier. To validate parameters of the RBC network model, stretching tests on both coarse and fine meshes are performed and compared with the corresponding experimental data. Furthermore, RBC deformation in pipe and shear flows is simulated, revealing the capacity of the current method for modeling RBC deformation in various flows. Moreover, hydrodynamic interactions between two RBCs are studied in pipe flow. Numerical results illustrate that the leading cell always has a larger flow velocity and deformation, while the following cells move slower and deform less.Copyright © 2013 John Wiley & Sons, Ltd.     

Using Newton-GMRES for viscoelastic flow time-steppers

Kinetic theory models exhibit dynamics that depend on a few low-order moments of the underlying conformational distribution function. This dependence is exhibited in a compact spectrum of eigenvalues for the Jacobian matrix associated with the dynamical system. We take advantage of this spectrum of eigenvalues through Newton-GMRES iterations to enable dynamic viscoelastic simulators (time-steppers) to obtain stationary states and perform stability/bifurcation analysis. Results are presented for three example problems: (1) the equilibrium behavior of the Doi model with the Onsager excluded volume potential, (2) pressure-driven flow of non-interacting rigid dumbbells in a planar channel, and (3) pressure-driven flow of non-interacting rigid dumbbells through a planar channel with a linear array of equally spaced cylinders.     

Fundamentals of migrating multi-block lattice Boltzmann model for immiscible mixtures in 2D geometries

This paper proposes an extension scheme for the application of the single phase multi-block lattice Boltzmann method (LBM) to the multiphase Gunstensen model, in which the grid is refined in a specific part of the domain where a fluid–fluid interface evolves, and the refined grid is free to migrate with the suspended phase in the flow direction. The method is applicable to single and multiphase flows, and it was demonstrated by simulating a benchmark single phase flow around a 2D asymmetrically placed cylinder in a channel and for investigating the shear lift of 2D neutrally buoyant drop in a parabolic flow.     

Multiple-relaxation-time lattice Boltzmann model for generalized Newtonian fluid flows

The generalized Newtonian fluid, as an important kind of non-Newtonian fluids, has been widely used in both science and engineering. In this paper, we present a multiple-relaxation-time lattice Boltzmann model for generalized Newtonian fluid, and validate the model through a detailed comparison with analytical solutions and some published results. The accuracy and stability of the present model are also studied, and compared with those of the popular single-relaxation-time lattice Boltzmann model. Finally, the limit and potential of the multiple-relaxation-time lattice Boltzmann model are briefly discussed.     

Analysis of Thermal Flow in a Rotating Porous U-Turn Duct Using Lattice Boltzmann Method

The lattice Boltzmann method is carried out to investigate the heat transfer enhancement in a U-turn duct which is partially filled with a porous media. The porous layer is inserted at the core of the duct and is modeled using the Brinkman–Forchheimer assumptions. In order to validate the results, first a channel flow problem without any porous layer is compared with available data. Second, the porous Couette flow and partially porous channel flow are successfully compared with the studies of other researchers. Then, fluid flow in a clear U-turn duct is studied looking carefully at the velocity, curvature and rotation effects. Finally, the effects of porous layer thickness on the rate of heat transfer and pressure drop are investigated. Parametric studies are conducted to evaluate the effects of various parameters (i.e., Reynolds number, Darcy number, rotation number), highlighting their influences on the thermo-hydrodynamics behavior of the flow. The optimum values of porous layer thickness are presented for specific flow parameters.     

直角和贴体坐标系下两种格子Boltzmann方法的比较研究

采用格子Boltzmann方法(LBM)和改进的插值格子Boltzmann方法(GILBM)研究了45°斜方腔的顶盖驱动流和Roach通道内的流动特性,并与基准解进行了对比。结果表明,对于45°斜方腔的顶盖驱动流,当雷诺数较小时,两种方法的计算结果与基准解吻合较好;但当雷诺数较大时,采用LBM的计算结果准确性降低,而基于GILBM方法得到的结果准确度升高,且计算稳定性好。对于Roach通道内的流体流动而言,两种方法的计算精度和复杂边界的复杂程度与雷诺数大小有关。根据流场边界形状的复杂程度,网格划分与计算精确度的不同要求,两种方法各有利弊。     

Pressure-driven flow of wormlike micellar solutions in rectilinear microchannels

In this paper the inhomogeneous response of the (two species) VCM model (Vasquez et al., A network scission model for wormlike micellar solutions. I. Model formulation and homogeneous flow predictions, J. Non-Newtonian Fluid Mech. 144 (2007) 122–139) is examined in steady rectilinear pressure-driven flow through a planar channel. This microstructural network model incorporates elastically active network connections that break and reform mimicking the behavior of concentrated wormlike micellar solutions. The constitutive model, which includes non-local effects arising from Brownian motion and from the coupling between the stress and the microstructure (finite length worms), consists of a set of coupled nonlinear partial differential equations describing the two micellar species (a long species ‘A’ and a shorter species ‘B’) which relax due to reptative and Rouse-like mechanisms as well as rupture of the long micellar chains. In pressure-driven flow, the velocity profile predicted by the VCM model deviates from the regular parabolic profile expected for a Newtonian fluid and exhibits a complex spatial structure. An apparent slip layer develops near the wall as a consequence of the microstructural boundary conditions and the shear-induced diffusion and rupture of the micellar species. Above a critical pressure drop, the flow exhibits shear banding with a high shear rate band located near the channel walls. This pressure-driven shear banding transition or ‘spurt’ has been observed experimentally in macroscopic and microscopic channel flow experiments. The detailed structure of the shear banding profiles and the resulting flow curves predicted by the model depend on the magnitude of the dimensionless diffusion parameter. For small channel dimensions, the solutions exhibit ‘non-local’ effects that are consistent with very recent experiments in microfluidic geometries (Masselon et al., Influence of boundary conditions and confinement on non local effects in flows of wormlike micellar systems, Phys. Rev. E 81 (2010) 021502).