Study on retention behavior of peropyrene-type polycyclic aromatic hydroccrbons with various bonded stationary phases in reversed-phase liquid chromatography

Summary The retention behavior of 15 peropyrene-type polycyclic aromatic hydrocarbons was investigated on various bonded stationary phases in reversed-phase liquid chromatography. On diphenyl and naphthylethyl bonded phases, high correlations were obtained between the molecular polarizability of solutes and their retention. However, very low or no correlations were found on various octadecyl bonded phases. These facts are discussed by using the electrostatic interaction concept between the solutes and the stationary phase. We conclude that these observations are due to two reasons: the difference in the degree of planarity of polycyclic aromatic hydrocarbons and the high ability of planarity recognition of octadecyl bonded phases.     

Retention system, thermodynamic properties and structure correlations of environmental analytes

Summary A composite chromatographic retention index system has been developed for identifying polycyclic aromatic hydrocarbons, polychlorinated biphenyls and polychlorinated pesticides. When retention indices and thermodynamic data of polycyclic aromatic hydrocarbons on 5% phenylmethylsiloxane stationary phase were compared with those obtained on polydimethylsiloxane a correlation was found between retention and electronic properties. Determination and quantitation of individual contaminants in water and sediment samples from Lake Mecoacán were achieved by capillary gas chromatography with flame ionization and electrocapture detection.     

Determination of average molecular polarizabilities of polycyclic aromatic hydrocarbons directly from retention indices

Summary A significant correlation has been found between the retention indices of polycyclic aromatic hydrocarbons on non-polar stationary phases and the average molecular polarizabilities of the molecules separated on these phases. Equations have been derived for the determination of the average molecular polarizabilities, directly from the retention indices.     

Substituent effects in chemical carcinogenesis: Methyl derivatives of the benzacridines

An explanation for the different carcinogenic potencies observed among methyl derivatives of the angular benzacridines is given in terms of the tendencies of these compounds to undergo specific metabolic activating reactions analogous to those of polycyclic aromatic hydrocarbons. Theoretical reactivity indices representing these reactions correlate with the carcinogenic activities of these compounds.     

In Situ Correlations Between Polycyclic Aromatic Hydrocarbons (PAH) and Pah Metabolizing System Activities in Mussels and Fish in the Mediterranean Sea: Preliminary Results

Abstract

Biochemical indices based on enzymatic activities have been determined in fish and mussels sampled in various different coastal locations in the Mediterranean Sea. Preliminary results show a good agreement between biochemical measurements in marine organisms and chemical analyses of polycyclic aromatic hydrocarbons present in sediments. The results obtained suggest the use of biochemical indices for application in chemical contaminant biomonitoring.     

Magnetic graphene oxide as adsorbent for the determination of polycyclic aromatic hydrocarbon metabolites in human urine

Detection of monohydroxy polycyclic aromatic hydrocarbons metabolites in urine is an advisable and valid method to assess human environmental exposure to polycyclic aromatic hydrocarbons. In this work, novel Fe₃O₄/graphene oxide composites were prepared and their application in the magnetic solid‐phase extraction of monohydroxy polycyclic aromatic hydrocarbons in urine was investigated by coupling with liquid chromatography and mass spectrometry. In the hybrid material, superparamagnetic Fe₃O₄ nanoparticles provide fast separation to simplify the analytical process and graphene oxide provides a large functional surface for the adsorption. The prepared magnetic nanocomposites were characterized by X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, and vibrating sample magnetometry. The experimental conditions were optimized systematically. Under the optimal conditions, the recoveries of these compounds were in the range of 98.3–125.2%, the relative standard deviations ranged between 6.8 and 15.5%, and the limits of detection were in the range of 0.01–0.15 ng/mL. The simple, quick, and affordable method was successfully used in the analysis of human urinary monohydroxy polycyclic aromatic hydrocarbons in two different cities. The results indicated that the monohydroxy polycyclic aromatic hydrocarbons level in human urine can provide useful information for environmental exposure to polycyclic aromatic hydrocarbons.     

The role of electric interaction in the retention index cencept. Universal interaction indices for GLC,HPLC and TLC

Summary New electric interaction indices are proposed which can universally be used in GLC, HPLC and TLC. These indices can easily be calculated from a variety of the commonly used retention parameters, such as Kováts' retention indices, relative retention times, capacity factors, or R_F values, and the average molecular polarizabilities of the reference compounds. Calculation examples for polycyclic aromatic hydrocarbons and n-alkanes are given. Application of the electric interaction indices for studying the retention mechanism is demonstrated.     

Relationship between the average molecular polarizabilities of polycyclic aromatic hydrocarbons and their retention indices determined on various stationary phases

The Kováts retention indices of 10 polycyclic aromatic hydrocarbons were determined on SE-30, OV-101, SE-52, OV-7 and OV-17 stationary phases. A significant correlation has been found between the retention indices and the average molecular polarizabilities of the analyzed substances. Equations were derived for the direct determination of the average molecular polarizabilities from the retention index values. The influence of the temperature on this relationship is also indicated.     

Computer-assisted retention prediction of polycyclic aromatic hydrocarbons in supercritical fluid chromatography using carbon dioxide as the mobile phase

Summary The dependence of the capacity factor of polycyclic aromatic hydrocarbons on column temperature and on the density of the mobile phase in supercritical-fluid chromatography was investigated using carbon dioxide as the mobile phase. Logarithmic capacity factors of polycyclic aromatic hydrocarbons were obtained as a linear function of the reciprocal column temperature at a constant molar volume of carbon dioxide.The application of the Retention Prediction System to supercritical-fluid chromatography is demonstrated: one can predict the retention of polycyclic aromatic hydrocarbons using equations including column temperature, density and the physico-chemical properties of the solutes as the parameters.     

Determination of chlorinated polycyclic aromatic hydrocarbons in water by solid‐phase extraction coupled with gas chromatography and mass spectrometry

Given the potential risks of chlorinated polycyclic aromatic hydrocarbons, the analysis of their presence in water is very urgent. We have developed a novel procedure for determining chlorinated polycyclic aromatic hydrocarbons in water based on solid‐phase extraction coupled with gas chromatography and mass spectrometry. The extraction parameters of solid‐phase extraction were optimized in detail. Under the optimal conditions, the proposed method showed wide linear ranges (1.0–1000 ng/L) with correlation coefficients ranging from 0.9952 to 0.9998. The limits of detection and the limits of quantification were in the range of 0.015–0.591 and 0.045–1.502 ng/L, respectively. Recoveries ranged from 82.5 to 102.6% with relative standard deviations below 9.2%. The obtained method was applied successfully to the determination of chlorinated polycyclic aromatic hydrocarbons in real water samples. Most of the chlorinated polycyclic aromatic hydrocarbons were detected and 1‐monochloropyrene was predominant in the studied water samples. This is the first report of chlorinated polycyclic aromatic hydrocarbons in water samples in China. The toxic equivalency quotients of chlorinated polycyclic aromatic hydrocarbons in the studied tap water were 9.95 ng the toxic equivalency quotient m^?3. 9,10‐Dichloroanthracene and 1‐monochloropyrene accounted for the majority of the total toxic equivalency quotients of chlorinated polycyclic aromatic hydrocarbons in tap water.     

System for calculating the linear temperature-programmed retention indices of polycyclic aromatic compounds

Theoretical procedures have been used to predict linear temperature-programmed retention indices for polycyclic aromatic compounds. It is possible to calculate such indices for polycyclic aromatic compounds in some practical situations in which the compounds cannot be eluted during a simple linear temperature program. The theory has been tested for a number of polycyclic aromatic hydrocarbon (PAHs) in single- and multi-plateau temperature-programmed gas chromatography with SE-52 as the stationary phase. This method will extend the applicability of linear retention indices for the identification of the isomers of polycyclic aromatic compounds.     

Optimization of solid‐phase microextraction using Taguchi design to quantify trace level polycyclic aromatic hydrocarbons in water

This article introduces a simple, rapid, and reliable solid‐phase microextraction (SPME) method coupled with GC‐MS for the quantitative determination of 16 polycyclic aromatic hydrocarbons in water. In this study, the Taguchi experimental design was used to optimize extraction conditions of polycyclic aromatic hydrocarbons using SPME method to obtain highly enriched analytes. Consequently, quantitative determination of polycyclic aromatic hydrocarbons in water was achieved by GC‐MS technique. The selected parameters affecting enrichment of polycyclic aromatic hydrocarbons were sample extraction time, stirring speed, temperature, ionic strength, and pH. The study revealed that optimal operating conditions were found to be 90‐min extraction time, 1400 rpm stirring speed, and 60°C sample temperature. The effect of ionic strength and pH were shown to be insignificant. Optimized conditions were also reevaluated by placing the 16 polycyclic aromatic hydrocarbons into several subgroups based on their molecular weight. The extraction efficiency of polycyclic aromatic hydrocarbons with low molecular weight was shown to be a function of only the extracting temperature. Satisfactory results were obtained for linearity (0.983–0.999), detection limits (2.67–18.02 ng/L), accuracy (71.2–99.3%), and precision (4.3–13.5%). The optimum conditions reported by other design approaches were evaluated and generalized optimum conditions were suggested.     

Structure-type separation of diesel fuels by solid phase extraction and identification of the two- and three-ring aromatics by capillary GC-mass spectrometry

A simple and effective solid phase extraction (SPE) method using silica gel micro glass columns has been developed for the separation of diesel fuel into groups of aliphatic, and mono-, di- and polyaromatic hydrocarbons. It is based on a stepwise gradient of dichloromethane in n-pentane. The resulting fractions were analyzed by capillary gas chromatography with a flame ionization detector and coupled gas chromatography-mass spectrometry. Commercially available standards, and retention indices and mass spectra were used for identification of individual aromatic compounds. The principal polycyclic aromatic hydrocarbons (PAHs) in diesel fuel are naphthalene, biphenyl, fluorene, phen-anthrene and their alkylated derivatives. Sulfur-containing PAHs are mainly represented by methyl-substituted dibenzo-thiophenes.     

Determination of polycyclic aromatic hydrocarbons in industrial waste water at the ng/ml. level

A combination of column, thin-layer and capillary gas chromatography was investigated as a quantitative method for determination of polycyclic aromatic hydrocarbons in industrial waste water at the 10-100 ng/ml level. The method gives 90-95% overall recovery. Analytical results for polycyclic aromatic hydrocarbons in waste water from a Norwegian aluminium plant are presented.     

Aromaticity of benzenoid hydrocarbons with inserted –B=B– and –BH–BH– groups: a comparison

Structures of selected polycyclic conjugated hydrocarbons with –B=B– and –BH–BH– moieties inserted in different places were calculated at the B3LYP/6-311++G** level and their aromatic properties evaluated. HOMA, NICS(0), NICS(1)zz, Λ and PDI indices were used for studying their aromatic properties. Both optimized planar (as in parent hydrocarbons) and non-planar structures were taken into account. It is shown that insertion of both types of boron groups disturbs and decreases the aromaticity of the corresponding hydrocarbons. The decreasing effect of the –BH–BH– group is much stronger. What is quite intriguing is that it appears that non-planar structures of the studied compounds have a little higher aromaticity than the strictly planar ones. Mutual correlations between results obtained by different aromaticity indices are calculated and thoroughly discussed.     

Simultaneous determination of 16 polycyclic aromatic hydrocarbons in reclaimed water using solid‐phase extraction followed by ultra‐performance convergence chromatography with photodiode array detection

A new fast and effective analysis method has been developed to simultaneously determine 16 polycyclic aromatic hydrocarbons in reclaimed water samples by ultra‐performance convergence chromatography with photodiode array detection and solid‐phase extraction. The parameters of ultra‐performance convergence chromatography on the separation behaviors and the crucial condition of solid‐phase extraction were investigated systematically. Under optimal conditions, the 16 polycyclic aromatic hydrocarbons could be separated within 4 min. The limits of detection and quantification were in the range of 0.4–4 and 1–10 μg/L in water, respectively. This approach has been applied to a real industrial wastewater treatment plant successfully. The results showed that polycyclic aromatic hydrocarbons were dramatically decreased after chemical treatment procedure, and the oxidation procedure was effective to remove trace polycyclic aromatic hydrocarbons.     

Development of a highly efficient in-tube solid-phase microextraction system coupled with UHPLC-MS/MS for analyzing trace hydroxyl polycyclic aromatic hydrocarbons in biological samples

Hydroxyl polycyclic aromatic hydrocarbons are considered active mutagenic and carcinogenic substances and are found in extremely low levels (ng/g) in biological samples. As a result, their determination in urine and blood samples is challenging, and a sensitive and effective method for the analysis of trace hydroxyl polycyclic aromatic hydrocarbons in complex biological matrices is required. In this work, a novel macroporous in-tube solid-phase microextraction monolith was prepared via a thiol-yne click reaction, and a highly efficient analytical method based on in-tube solid-phase microextraction coupled with UHPLC-MS/MS was developed to determine hydroxyl polycyclic aromatic hydrocarbons with low detection limits of 0.137–11.0 ng/L in complex biological samples. Four hydroxyl polycyclic aromatic hydrocarbons, namely, 2-hydroxyanthraquinone, 1-hydroxypyrene, 1,8-dihydroxyanthraquinone, and 6-hydroxychrysene, were determined in the urine samples of smokers, non-smokers, and whole blood samples of mice. Satisfactory recoveries were achieved in the range of 83.1–113% with relative standard deviations of 3.2–9.7%. It was found that implementation of the macroporous monolith gave a highly efficient approach for enriching trace hydroxyl polycyclic aromatic hydrocarbons in biological samples.     

Quantification of 16 polycyclic aromatic hydrocarbons in cigarette smoke condensate using stable isotope dilution liquid chromatography with atmospheric‐pressure photoionization tandem mass spectrometry

A stable isotope dilution liquid chromatography tandem mass spectrometry method for the analysis of 16 polycyclic aromatic hydrocarbons in cigarette smoke condensate was developed and validated. Compared with previously reported methods, this method has lower limits of detection (0.04–1.35 ng/cig). Additionally, the proposed method saves time, reduces the number of separation steps, and reduces the quantity of solvent needed. The new method was applied to evaluate polycyclic aromatic hydrocarbon content in 213 commercially available cigarettes in China, under the International Standardization Organization smoking regime and the Health Canadian intense smoking regime. The results showed that the total polycyclic aromatic hydrocarbon content was more than two times higher in samples from the Health Canadian intense smoking regime than in samples from the International Standardization Organization smoking regime (1189.23 versus 2859.50 ng/cig, p < 0.05). Meanwhile, the concentration of individual polycyclic aromatic hydrocarbons (and total polycyclic aromatic hydrocarbons) increased with labeled tar content in both of the tested smoking regimes. There was a positive correlation between total polycyclic aromatic hydrocarbons under the International Standardization Organization smoking regime with that under the Health Canadian intense smoking regime. The proposed liquid chromatography tandem mass spectrometry method is satisfactory for the rapid, sensitive, and accurate quantitative evaluation of polycyclic aromatic hydrocarbon content in cigarette smoke condensate, and it can be applied to assess potential health risks from smoking.     

Determination of Trace Amounts of Organic Pollutants in the Yellow River by Capillary Column Gas Chromatography-Mass Spectrometry

Abstract

The trace organic pollutants in the Yellow River enriched by a solvent extraction method were pre-separated into four different fractions of fatty hydrocarbons, polycyclic aromatic hydrocarbons, polar compounds and organic acids and were analyzed by the use of combined capillary column gas chromatography-mass spectrometry. Using the combined techniques of relative retention value, mass spectra and mass chromatogram, more than 60 organic pollutants were identified, among which 16 fatty hydrocarbons and 6 polycyclic aromatic hydrocarbons which were quantitatively analyzed. The concentration range of fatty hydrocarbon was 5–800 ng/l, and that of polycyclic aromatic hydrocarbon was 0-90ng/l.     

Quantitative Structure-Property Relationship: XXII. Polycyclic Aromatic Hydrocarbons

The previously suggested quantitative structure-property relationship was applied to estimating the properties of polycyclic aromatic hydrocarbons containing from two to six benzene rings fused in various modes. For these compounds, the boiling points, retention indices, and distribution factors in the octanol-water system were calculated. The results obtained are well consistent with the experimental data.