10<Emphasis Type="Italic">α</Emphasis>-Hydroxy-<Emphasis Type="Italic">β</Emphasis>-isomorphine,a by-product of the synthesis of 10<Emphasis Type="Italic">α</Emphasis>-hydroxymorphine

Abstract  A new compound was isolated from the reaction mixture after O-demethylation of 6-O-acetyl-10α-acetoxycodeine with boron tribromide. The structure of this compound, 10α-hydroxy-β-isomorphine, was elucidated by spectral data, and its spatial arrangement was deduced from an NOE experiment. Capillary zone electrophoresis was used for separation of morphine and its 10-hydroxy analogues. Graphical abstract        

<Emphasis Type="Italic">N</Emphasis>′-tetrazolylmethoxyl derivatives of <Emphasis Type="Italic">N</Emphasis>-methyldiazene <Emphasis Type="Italic">N</Emphasis>-oxides

A preparation method was developed for previously unknown tetrazole derivatives containing in the 1, 2, and/or 5 positions of the tetrazole ring N-methyldiazene-N-oxide-N′-oxymethyl groups.     

Expression of a Glucose-tolerant β-glucosidase from <Emphasis Type="Italic">Humicola grisea</Emphasis> var. <Emphasis Type="Italic">thermoidea</Emphasis> in <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

A β-glucosidase gene (bgl4) from Humicola grisea var thermoidea was successfully expressed in Saccharomyces cerevisiae. The recombinant protein (BGL4 ^Sc ) was initially detected associated with yeast cells and later in the culture medium. BGL4 ^Sc showed optimal pH and temperature of 6.0 and 40 °C, respectively, and an apparent molecular mass of 57 kDa. The enzyme showed activity against cellobiose and synthetic substrates, and was inhibited more than 80% by Fe²⁺, Cu²⁺, Zn²⁺, and Al³⁺. Using p-nitrophenyl-β-d-glucopyranoside (pNPG) as substrate, BGL4 ^Sc presented a V _max of 6.72 μmol min⁻¹ mg total protein⁻¹ and a K _m of 0.16 mM under optimal conditions. Most important, BGL4 ^Sc is resistant to inhibition by glucose and the calculated K _i value for this sugar is 70 mM. This feature prompts BLG4 ^Sc as an ideal enzyme to be used in the saccharification process of lignocellulosic materials for ethanol production.     

Study of<Emphasis Type="Italic"> β</Emphasis>–<Emphasis Type="Italic">α</Emphasis> recrystallization of the polypropylene

The crystalline modifications and of polypropylene (PP) were studied by using polarized light microscopy (PLM), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC). Typically crystals surrounded by spherulites were observed at low temperature. With increasing temperature the crystals melted and a new crystal appeared. More interestingly, the melting temperature of the new crystal was about 5 ° higher than that of spherulites originally present in the sample formed isothermally. It was assumed that this new crystal was the recrystalline crystal. This assumption was supported by the DSC results. Furthermore, the crystallization kinetics of the PP used was studied on the basis of the traditional Avrami analysis. As a result, the Avrami exponents of crystallization temperature from 120 to 130 °C ranged between 4.21 and 3.60, indicating that the crystallization mechanism of PP order melt was spherulitic growth and random nucleation.     

Influence of the force interaction on accumulation of macroscopic correlations in elementary reaction <Emphasis Type="Italic">A</Emphasis> + <Emphasis Type="Italic">B</Emphasis> → <Emphasis Type="Italic">C</Emphasis>

The applicability of the Encounter Theory (ET) (the prototype of the Collision Theory) concepts for widely occurring diffusion assisted irreversible bulk reaction A + B →C (for example, radical reaction) in dilute solutions taking account of initial microscopic correlations and force interactions between reactants has been treated theoretically with modern many-particle method for the derivation of non-Markovian binary kinetic equations. The method shows that taking into consideration initial correlations and force interactions leads to the redefinition of the Markovian rate constant only in the expressions derived earlier. Thus, just as in the reaction A + A →C and the reaction A + B →C neglecting force and initial correlations, the Modified Encounter Theory (MET), when reduced to equations of a Regular Form, both extends the time applicability range of ET homogeneous rate equation, and yields the inhomogeneous equation of the Generalized Encounter Theory (GET). It reveals macroscopic correlations induced by the encounters in the reservoir of free walks in full agreement with physical considerations. Time accumulation of macroscopic correlations obeys the same time law as in the previously considered case neglecting force interactions. Just the rate of the process will change, according to traditional redefinition of the steady-state constant of the reaction.     

Synthesis of 20<Emphasis Type="Italic">S</Emphasis>-protopanaxadiol <Emphasis Type="Italic">β</Emphasis>-D-galactopyranosides

20S-Protopanaxadiol (3β,12β,20S-trihydroxydammar-24-ene) 3-, 12-, and 20-O-β-D-galactopyranosides were synthesized for the first time. Condensation of 12β-acetoxy-3β,20S-dihydroxydammar-24-ene (1) and 2,3,4,6-tetra-O-acetyl-α-D-galactopyranosylbromide (α-acetobromogalactose) (2) under Koenigs–Knorr conditions with subsequent removal of the protecting groups resulted in regio- and stereoselective formation of 20S-protopanaxadiol 3-O-β-D-galactopyranoside, an analog of the natural ginsenoside Rh₂. Glycosylation of 12β,20S-dihydroxydammar-24-en-3-one (5) by 2 with subsequent treatment of the reaction products with NaBH₄ in isopropanol and deacetylation with NaOMe gave 20S-protopanaxadiol 12- and 20-O-β-Dgalactopyranosides.     

Directed Aminomethylation of Pyrrole,Indole, and Carbazole with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>-Tetramethylmethanediamine

Catalytic aminomethylation of pyrrole and indole with N,N,N′,N′-tetramethylmethanediamine in the presence of 5 mol % of ZrOCl₂·8H₂O proceeds selectively at the positions 2, 5 of pyrrole and 1, 3 of indole. Carbazole under the same conditions affords 3-formyl-9-aminomethyl derivative. The reaction in the presence of 5 mol % of K₂CO₃ occurs as monoaminomethylation: for pyrrole at the position 2, for indole at the position 3, and for carbazole at the nitrogen atom of the substrate. Water-soluble 1,1′-(1H-pyrrole-2,5-diyl)bis(N,N-dimethylmethanamine) exhibits a fungistatic activity with respect to phytopathogenic fungi Rhizoctonia solani.     

Synthesis of <Emphasis Type="Italic">α</Emphasis>-chloropyridine derivatives of <Emphasis Type="Italic">γ</Emphasis>-aminobutyric acid

The sodium salt of N-(6-chloronicotinoyl)-γ-aminobutyric acid, a structural analog of the known nootropic and vasidilating drug picamilon, was synthesized via Schotten–Baumann acylation of γ-aminobutyric acid with 6-chloronicotinoyl chloride and subsequent neutralization of the N-(6-chloronicotinoyl)-γ-aminobutyric acid that was obtained in >60% yield.     

Phase Equilibrium States in the <Emphasis Type="Italic">n</Emphasis>-Dodecane–<Emphasis Type="Italic">n</Emphasis>-Hexadecane–Cyclododecane System

A three-component system comprising cyclododecane and n-alkanes is studied by means of differential thermal analysis on a differential scanning microcalorimeter. It is concluded that the investigated system is of the eutectic type and the n-dodecane–n-hexadecane–cyclododecane eutectic mixture system is 73.0 wt % n-С₁₂Н₂₆, 9.0 wt % n-С₁₆Н₃₄, and 18.0 wt % С₁₂Н₂₄. Its melting point is found to be ?17.7°C.     

Theoretical and experimental NMR studies of the Swern oxidation of methyl 6<Emphasis Type="Italic">α</Emphasis>,7<Emphasis Type="Italic">β</Emphasis>-dihydroxyvouacapan-17<Emphasis Type="Italic">β</Emphasis>-oate

This work describes the synthesis of new derivatives of 6α,7β-dihydroxyvouacapan-17β-oic acid (1) employing the Swern method for the oxidation of C-6 and C-7 of methyl 6α,7β-di-hydroxyvouacapan-17β-oate (2) and the formation of methyl 6,7-dioxovouacapan-17β-oate (3). NMR structural studies associated with theoretical calculations of reaction intermediates and products are also reported. The mixture of methyl 7β-hydroxy-6-oxovouacapan-17β-oate (4; 21%) and methyl 6α-hydroxy-7-oxovouacapan-17β-oate (5; 79%) was the product from the first step of the oxidation of 2. The lower energy of 5, calculated by HF/6-31G* and DFT/BLYP/6-31G* methods, reinforces the thermodynamic control proposed for the reaction. After further Swern oxidation of the mixture of 4 and 5, the isomeric form methyl 6-hydroxy-7-oxovouacap-5-en-17β-oate (6) was obtained. Theoretical calculations indicate a lower energy for the mono-enol 6 than the 1,2-diketo 3 and the other mono-enol methyl 7-hydroxy-6-oxovouacap-7-en-17β-oate (7).     

<Emphasis Type="Italic">β</Emphasis>-Chloro-<Emphasis Type="Italic">α</Emphasis>,<Emphasis Type="Italic">β</Emphasis>-unsaturated carbonyls as convenient precursors of highly substituted benzenes

The Diels–Alder reactions of three β-chloro-α,β-unsaturated carbonyl compounds 1–3 with different dienes were carried out to afford highly functionalized cyclohexenes 4–9, bearing quaternary centers, in good yields. These cycloadducts (CAs) undergo dehydrochlorination with subsequent aromatization in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene DBU to produce new substituted benzenes 11–14. Compound 10 is the product of lactonization and removal of an HCl molecule from compound 7. All products were characterized by NMR, IR, elementary analysis and some of them by MS. Structure assignments of isomers were carried out on the basis of NMR chemical shifts and coupling constants using 1D, 2D and heteronOe NMR techniques.     

Microstructure of Polymers Prepared in the Presence of Tri-<Emphasis Type="Italic">n</Emphasis>-butylboron–<Emphasis Type="Italic">p</Emphasis>-Quinone System

The microstructure of polystyrene, poly(methyl acrylate), and poly(tert-butyl acrylate) obtained in the presence of tri-n-butylboron in combination with naphthoquinone-1,4 and 2,3-dimethylbenzoquinone is studied. The stereoregularity of polymers formed under these conditions may be described in the framework of the first-order Markov chain model. The use of p-quinones in combination with tri-n-butylboron favors an increase in the content of isotactic triads in the polymers. The causes of the observed deviations are discussed.     

Computer models of eutectic-type <Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> diagrams with allotropy

Using the eutectic-type T–x–y diagram as an example, it can be represented the analysis of its geometrical construction dependence on the temperature of a component two polymorphous modifications which participate in mono- and invariant metatectic and invariant eutectic (eutectoid) transformations above or below (and within) binary eutectics temperature intervals and below a ternary eutectic temperature. Computer models for considered phase diagrams have been designed. Such models help to solve applied tasks like visualization, isopleths and isothermal sections decoding, mass balances calculation and evaluation of phase and conglomerate concentration in microstructure.     

Measurement of the neutron flux parameters <Emphasis Type="Italic">f</Emphasis> and <Emphasis Type="Italic">α</Emphasis> at the Pavia TRIGA Mark II reactor

In this paper, evaluation of neutron flux parameters of TRIGA Mark II reactor in Pavia was carried out. For any of the three irradiation positions investigated, this work represented the first experimental evaluation of α. Moreover, in addition to α, values of other parameters such as f, Φ _th and Φ _e were also calculated and compared with the existent literature data from other TRIGA Mark II reactors and the Pavia’s facility. Results obtained in the present study represent a mandatory step ahead for future application of k ₀-Neutron Activation Analysis method (k ₀-NAA) at Pavia’s facility.     

Three New <Emphasis Type="Italic">in situ</Emphasis> Syntheses of <Emphasis Type="Italic">N</Emphasis>-Acyl-α-triphenylphosphonioglycinates

Summary. N-Acyl--hydroxyglycinates were transformed into N-acyl--triphenylphosphonioglycinates by (i) phosphorylation with Ph ₃PBr₂ in the presence of Et ₃N or (ii) in reaction with DCC and Ph ₃P·HBF₄ in the presence of catalytic amounts of Ph ₃P as well as (iii) by a new kind of Mitsunobu reaction with Ph ₃P·HBF₄ as a nucleophile conjugated acid. The N-acyl--triphenylphosphonioglycinates can be effectively used without isolation for a nucleophilic displacement of the triphenylphosphonium group to obtain corresponding -substituted -amino acid derivatives.     

Crystallization and Simulation Studies in <Emphasis Type="Italic">m</Emphasis>-Dinitrobenzene–<Emphasis Type="Italic">p</Emphasis>-Chloroaniline Eutectic System

Thaw-melt method showed that the phase diagram of m-dinitrobenzene (m-DNB)–p-chloroaniline (p-CA) system belongs to simple eutectic type. The kinetics of solidification followed Hillig and Turnbull’s equation. Excess thermodynamic functions and FT-IR spectral studies indicated some weak interaction between the component molecules in the eutectic. The mechanical strength of the eutectic was found to be higher than those of its components. Molecular stability was predicted on the basis of frontier molecular orbital analysis. The value was found to be 0.06073 a.u. for eutectic, indicating. the possibility of charge transfer interaction during the eutectic formation. Results showed that the eutectic is stabilized by hydrogen-bond formation. Calculated interaction energy of reactants and eutectic was found to be–17.4 kJ mol^–1.     

Dirhenium Compounds Supported by <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis><Emphasis Type="BoldItalic">′</Emphasis>-Dimethylbenzamidinate: Formation of Linear Polymers via Axial Ligation

The reaction between Re₂(DMBA)₄Cl₂ and NaN(CN)₂ resulted in Re₂(DMBA)₄(N(CN)₂)₂ (1a), where DMBA is N,N′-dimethylbenzamidinate. Molecular compounds Re₂(DMBA)₄(ReO₄)₂ (1b) and Re₂(DMBA)₄(OP(O)(OH)Ph)₂ (1c) were obtained through the reactions between Re₂(DMBA)₄(NO₃)₂ and the respective monoanion. The dirhenium(III) coordination polymers [Re₂(DMBA)₄(μ-O,O′-WO₄)·2H₂O]_∞ (2a), [Re₂(DMBA)₄(μ-O,O′-MoO₄)·2H₂O]_∞ (2b), and [Re₂(DMBA)₄(μ-O,O′-1,4-(O₂C)₂C₆H₄)·2H₂O]_∞ (2c) were similarly prepared through slow diffusion of Re₂(DMBA)₄(NO₃)₂ in acetonitrile into aqueous solution containing the respective dianion. All new compounds were characterized with single crystal X-ray diffraction, which revealed the retention of the essential structural features of Re₂(DMBA)₄ unit upon the formation of coordination polymers.