Protein–induced aggregation of fluorescent conjugated polyelectrolytes with sulfonate groups: Synthesis and its sensing application

Anionically charged fluorescent conjugated polyelectrolytes of poly{[4,7‐(2,1,3‐benzothiadiazole)‐alt‐1,4‐phenylene]‐co‐[2,5‐bis(4‐sulfonatobutoxy)‐alt‐1,4‐phenylene]} ( P1 ) and poly{[4,7‐(bis(thiophen‐2‐yl)benzo‐2,1,3‐thiadiazole)‐alt‐1,4‐phenylene]‐co‐[2,5‐bis(4‐sulfonatobutoxy)‐alt‐1,4‐phenylene]} ( P2 ) were synthesized by Suzuki crosscoupling polymerization in the presence of a palladium catalyst. The conjugated polyelectrolytes with sulfonate groups, as efficient signal amplifying reporters, were carefully designed to be soluble in water over the entire pH range examined and interact with proteins through intermolecular forces. The polymers exhibited blue emission in aqueous solutions but green or red emission in solid form depending on the conjugation length due to intermolecular exciton migration. The anionic conjugated polymers exhibited blue‐to‐green or blue‐to‐red changes in fluorescence upon exposure to charged proteins, indicating that the polymers have potential applications in fluorescent array systems for protein. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of novel π‐conjugated polymers with phosphole ring derivatives

Novel π‐conjugated polymers ( 8 – 10 ) were prepared by the palladium‐catalyzed Sonogashira coupling reaction of three kinds of phosphole‐ring‐containing monomers with 2,5‐dihexyloxyl‐1,4‐diethynylbenzene. The obtained polymers ( 8 – 10 ) were regioregulated with the 2,5‐substituted phosphole ring in the polymer main chain and characterized with ¹H, ¹³C, and ³¹P NMR and FTIR. Polymers 8 – 10 were found to have an extended π‐conjugated system according to the results of UV–vis absorption spectra. In the fluorescence emission spectra of 8 – 10 , moderate emission peaks were observed in the visible blue‐to‐green region. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2867–2875, 2007     

Tropone‐containing π‐conjugated polymers: Annulation of tropone onto benzene ring in the conjugated polymer

Tropone‐fused, various π‐conjugated polymers ( P2 – P5 ) were synthesized by the palladium‐catalyzed coupling reaction of 1,4‐dibromo‐6,8‐dimethyl‐7H‐benzocyclohepten‐7‐one with aromatic divinyl, diboronic acid, and diethynyl compounds. The molecular orbital calculation of the model compounds was performed to discuss effective conjugation length of the repeating unit of the polymers. The absorption spectra of phenylenevinylene‐type polymers shifted to longer wavelengths than the model compounds by about 60 nm. They exhibited green fluorescence [λ_max(em) = 544 and 561 nm]. The absorption spectrum of a phenylene‐type polymer blueshifted by 10 nm; however, that of a phenyleneethynylene‐type polymer redshifted by 83 nm as compared with their model compounds. They showed fluorescence with peak maxima at 457 and 489 nm, respectively. As a result, the absorption spectra of phenylene‐ and phenylenevinylene‐type polymers blueshifted, but that of a phenyleneethynylene‐type polymer redshifted by the annulation of tropone onto a benzene ring in the conjugated polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1208–1215, 2004     

Facile synthesis of ortho‐Phenylene‐based conjugated polymers through transformation of cross‐conjugated poly(2,3‐diaryl[2]dendralene)s and their optical properties

We studied the facile synthesis of ortho‐phenylene‐based conjugated polymers through transformation of cross‐conjugated polymers having [2]dendralene moiety, poly(2,3‐diaryl[2]dendralene)s ( P1 s), and demonstrated the sequential synthesis of (Z)‐alkene‐ and ortho‐arylene‐containing conjugated polymers from P1 s. P1 s were transformed into cyclohexa‐1,4‐diene‐containing conjugated polymers ( P2 s) through a Diels–Alder reaction. Aromatization of the cyclohexa‐1,4‐diene skeleton was achieved by using 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone to give the ortho‐phenylene‐containing conjugated polymers ( P3 s). The ultraviolet–visible and fluorescence spectra of the cross‐conjugated polymers P1 s, and the conjugated polymers P2 s and P3 s indicated that the π–π interactions between the arylene moieties in P2 s were stronger than those in P1 s and P3 s. The synthetic method for P2 s and P3 s offers an effective synthesis of various types of (Z)‐alkene‐ and ortho‐arylene‐containing conjugated polymers. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 827–832     

Poly(1,4‐diketo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole‐alt−3,6‐carbazole/2,7‐fluorene) as high‐performance two‐photon dyes

This article reports the synthesis, one‐ and two‐photon absorption, and excited fluorescence properties of poly(1,4‐diketo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole‐alt‐N‐octyl‐3,6‐carbazole/2,7‐fluorene) ( PDCZ / PDFL ). PDCZ and PDFL are synthesized by the Suzuki cross‐coupling of 2,5‐dioctyl‐1,4‐diketo‐3,6‐bis(p‐bromophenylpyrrolo[3,4‐c]pyrrole and N‐octyl‐3,6‐bis(3,3‐dimethyl‐1,3,2‐dioxaborolan‐2‐yl)carbazole or 2,7‐bis(3,3‐dimethyl‐1,3,2‐dioxaborolan‐2‐yl)fluorene and have number‐average molecular weights of 8.5 × 10³ and 1.14 × 10⁴ g/mol and polydispersities of 2.06 and 1.83, respectively. They are highly soluble in common organic solvents and emit strong orange one‐ and two‐photon excited fluorescence (2PEF) in THF solution and exhibit high light and heat stability. The maximal two‐photon absorption cross‐sections (δ) measured in THF solution by the 2PEF method using femtosecond laser pulses are 970 and 900 GM per repeating unit for PDCZ and PDFL , respectively. These 1,4‐diketo‐pyrrolo[3,4‐c]pyrrole‐containing polymers with full aromatic structure and large δ will be promising high‐performance 2PA dyes applicable in two‐photon science and technology. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 944–951     

Highly near‐infrared photoluminescence from aza‐borondipyrromethene‐based conjugated polymers

Near‐infrared (NIR) emissive conjugated polymers were prepared by palladium‐catalyzed Sonogashira polymerization of diiodobenzene‐functionalized aza‐borondipyrromethene (Aza‐BODIPY) monomers, which were substituted at 3 and 5 or 1 and 7 positions on the Aza‐BODIPY core, with 1,4‐diethynyl‐2,5‐dihexadecyloxybenzene or 3,3′‐didodecyl‐2,2′‐diethynyl‐5,5′‐bithiophene. The structures of the polymers were confirmed by ¹H NMR, ¹³C NMR, ¹¹B NMR, Fourier transform infrared (FT‐IR) spectroscopies, and size exclusion chromatography (SEC). The optical properties were then characterized by UV–vis absorption and photoluminescence (PL) spectroscopies, and theoretical calculation using density‐functional theory (DFT) method. The polymers were fusible and soluble in common organic solvents including tetrahydrofuran (THF), o‐xylene, toluene, CHCl₃, and CH₂Cl₂, etc. The UV–vis absorption and PL spectra of the polymers shifted to long wavelength region in comparison with simple Aza‐BODIPY as the counterpart because of extended π‐conjugation of the polymers. The polymers efficiently emitted NIR light with narrow emission bands at 713～777 nm on excitation at each absorption maximum. Especially, the polymer attached 1,4‐diethynyl‐2,5‐dihexadecyloxybenzene to 3,5‐position on the core revealed intense quantum yields (?_F = 24%) in this NIR region (753 nm). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and comparison of the structure–property relationships of symmetric and asymmetric water‐soluble poly(p‐phenylene)s

Sodium salts of water‐soluble polymers poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(hexyloxy)‐1,4‐phenylene]} ( P1 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dodecyloxy)‐1,4‐phenylene]} ( P2 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dibenzyloxy)‐1,4‐phenylene]} ( P3 ), poly[2‐hexyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P4 ), and poly[2‐dodecyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P5 )] were synthesized with Suzuki coupling reactions and fully characterized. The first group of polymers ( P1 – P3 ) with symmetric structures gave lower absorption maxima [maximum absorption wavelength (λ_max) = 296–305 nm] and emission maxima [maximum emission wavelength (λ_em) = 361–398 nm] than asymmetric polymers P4 (λ_max = 329 nm, λ_em = 399 nm) and P5 (λ_max = 335 nm, λ_em = 401 nm). The aggregation properties of polymers P1 – P5 in different solvent mixtures were investigated, and their influence on the optical properties was examined in detail. Dynamic light scattering studies of the aggregation behavior of polymer P1 in solvents indicated the presence of aggregated species of various sizes ranging from 80 to 800 nm. The presence of alkoxy groups and 3‐sulfonatopropoxy groups on adjacent phenylene rings along the polymer backbone of the first set hindered the optimization of nonpolar interactions. The alkyl chain crystallization on one side of the polymer chain and the polar interactions on the other side allowed the polymers ( P4 and P5 ) to form a lamellar structure in the polymer lattice. Significant quenching of the polymer fluorescence upon the addition of positively charged viologen derivatives or cytochrome‐C was also observed. The quenching effect on the polymer fluorescence confirmed that the newly synthesized polymers could be used in the fabrication of biological and chemical sensors. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3763–3777, 2006     

Green‐emitting poly[(1,3‐phenylenevinylene)‐alt‐ (1,4‐phenylenevinylene)]s: Effect of the substitution patterns on the optical properties

Green‐emitting substituted poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)]s ( 6 ) were synthesized via the Wittig–Horner reaction. The polymers were yellow resins with molecular weights of 10,600. The ultraviolet–visible (UV–vis) absorption of 6 (λ_max = 332 or 415 nm) was about 30 nm redshifted from that of poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(1,4‐phenylenevinylene)] ( 2 ) but was only 5 nm redshifted with respect to that of poly[(1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)] ( 1 ). A comparison of the optical properties of 1 , 2 , and 6 showed that substitution on m‐ or p‐phenylene could slightly affect their energy gap and luminescence efficiency, thereby fine‐tuning the optical properties of the poly[(m‐phenylene vinylene)‐alt‐(p‐phenylene vinylene)] materials. The vibronic structures were assigned with the aid of low‐temperature UV–vis and fluorescence spectroscopy. Light‐emitting‐diode devices with 6 produced a green electroluminescence output (emission λ_max ～ 533 nm) with an external quantum efficiency of 0.32%. Substitution at m‐phenylene appeared to be effective in perturbing the charge‐injection process in LED devices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1820–1829, 2004     

Synthesis and luminescence of yellow/orange‐emitting poly[tris(2,5‐dihexyloxy‐1,4‐phenylenevinylene)‐ alt‐(1,3‐phenylenevinylene)]s

Soluble yellow/orange‐emitting poly[tris(2,5‐dihexyloxy‐1,4‐phenylenevinylene)‐alt‐(1,3‐phenylenevinylene)] derivatives ( 6 ) were synthesized and characterized. These polymers contained oligo(p‐phenylene vinylene) chromophores of equal conjugation length, which were jointed via a common m‐phenylene unit. An optical comparison of 6 and its model compound ( 8 ) at room temperature and low temperatures revealed the similarity in their absorption and fluorescence band structures. The vibronic band structure of 6 was assigned with the aid of the spectroscopic data for 8 at the low temperatures. 6 was electroluminescent and had an emission maximum wavelength at approximately 565 nm. With the device indium tin oxide/PEDOT/ 6 /Ca configuration, the polymer exhibited an external quantum efficiency as high as 0.25%. Simple substitution on m‐phenylene of 6 raised the electroluminescence output by a factor of about 10. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5853–5862, 2004     

High‐performance amorphous donor–acceptor conjugated polymers containing x‐shaped anthracene‐based monomer and 2,5‐bis(2‐octyldodecyl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione for organic thin‐film transistors

New diketopyrrolopyrrole (DPP)‐containing amorphous conjugated polymers, such as poly(3‐(5‐((9,10‐bis((4‐hexylphenyl)ethynyl)‐6‐(prop‐1‐ynyl)anthracen‐2‐yl)ethynyl) thiophen‐2‐yl)‐5‐(2‐hexyldecyl)‐2‐(2‐octyldodecyl)‐6‐(thiophen‐2‐yl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione) ( 4 ), and poly(3‐(5‐((2,6‐bis((4‐hexylphenyl)ethynyl)‐10‐(prop‐1‐ynyl)anthracen‐9‐yl)ethynyl)thiophen‐2‐yl)‐2,5‐bis(2‐octyldodecyl)‐6‐(thio phen‐2‐yl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione) ( 7 ), were successfully synthesized via Sonogashira coupling reactions under microwave conditions. Copolymer 7 , incorporating a DPP moiety at the 9,10‐position of the anthracene ring through a triple bond, showed a much lower bandgap energy (E_g = 1.81 eV) than copolymer 4 (E_g = 2.13 eV). Tuning of the molecular frontier orbital energies was achieved by only changing the anchoring position of dithiophenyl‐DPP from the 2,6‐ to the 9,10‐position in the anthracene ring. Because of the donor–acceptor (D–A) interaction and the two‐dimensional planar structure of the X‐shaped donor monomer, the resulting polymers showed good interchain π?π stacking in the thin‐film state, despite being amorphous polymers. When the newly synthesized polymer 7 was used as a semiconductor material in an organic thin‐film transistor, the best mobility of up to 0.12 cm² V^?1 s^?1 (I_on/off = ～ 4.4 × 10⁶) was observed, which is one of the highest values recorded for amorphous polymer films reported to date. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Conjugated and partially conjugated 2,5‐diphenylthiophene‐containing light‐emitting copolymers in polymeric light‐emitting diode (PLED) device fabrications

To study the effect of nonconjugation on polymeric and photophysical properties of thiophene‐containing polymers, new light‐emitting copolymers comprising either alternate 2,5‐diphenylthiophene and vinylene or alternate 2,5‐diphenylthiophene and aliphatic ether segments were synthesized. Both copolymers contained 2,5‐diphenylthiophene as the major chromophore and emitted a sky bluish fluorescence in dilute solution (10^?2 mg/mL). With a rigid and planarity structure and the concomitant crystallinity, the former copolymer (fully conjugated) possessed a higher quantum efficiency, a higher glass‐transition temperature, and a better thermal stability. In contrast, the latter copolymer (conjugated–nonconjugated) had better solubility and provided enhanced photophysical properties for the fabricated polymeric light‐emitting diode (PLED) device: at 15 V, the maximum current and brightness were 110 mA/cm² and 4289 cd/m², respectively, and the electroluminescence efficiency remained constant at approximately 4.9 cd/A in a voltage range of 8 to 14 V. The existence of intramolecular/intermolecular aggregates in the latter copolymer was corroborated from the the UV–vis and photoluminescence spectra of its solutions. With an increase in solution concentration, the shape and λ_max of the photoluminescence spectrum were redshifted. In a solution with a concentration as high as 10 mg/mL, the redshift was so drastic that the photoluminescence spectrum was nearly identical to that of a solid‐film. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6061–6070, 2004     

Donor–acceptor alternating π‐conjugated polymers containing Di(thiophen‐2‐yl)pyrene and 2,5‐Bis(2‐octyldodecyl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione for organic thin‐film transistors

New diketopyrrolopyrrole (DPP)‐containing conjugated polymers such as poly(2,5‐bis(2‐octyldodecyl)‐3‐(5‐(pyren‐1‐yl)thiophen‐2‐yl)‐6‐(thiophen‐2‐yl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione) (P(DTDPP‐alt‐(1,6)PY)) and poly(2,5‐bis(2‐octyldodecyl)‐3‐(5‐(pyren‐2‐yl)thiophen‐2‐yl)‐6‐(thiophen‐2‐yl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione) (P(DTDPP‐alt‐(2,7)PY)) were successfully synthesized via Suzuki coupling reactions under Pd(0)‐catalyzed conditions. P(DTDPP‐alt‐(2,7)PY), incorporating 2,5‐bis(2‐octyldodecyl)‐3,6‐di(thiophen‐2‐yl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione (DTDPP) at the 2,7‐position of a pyrene ring showed a lower band‐gap energy (E. = 1.65 eV) than the 1,6‐substituted analog, P(DTDPP‐alt‐(1,6)PY) (E = 1.71 eV). The energies of the molecular frontier orbitals of the substituted polymers were successfully tuned by changing the anchoring position of DTDPP from the 1,6‐ to the 2,7‐position of the pyrene ring. An organic thin‐film transistor fabricated using the newly synthesized P(DTDPP‐alt‐(2,7)PY), as a semiconductor material exhibited a maximum mobility of up to 0.23 cm² V^?1 s^?1 (I_on/off ～ 10⁶), which was much larger than that obtained using P(DTDPP‐alt‐(1,6)PY). This distinction is attributed to morphological differences in the solid state arising from differences between the geometrical configurations of DTDPP and the pyrene ring. In addition, the organic phototransistor devices made of P(DTDPP‐alt‐(2,7)PY) showed interesting photoinduced enhancement of drain current when irradiating the excitation light whose intensity is very small. Based on the photoinduced effect on I_DS, photocontrolled memory could be realized under the variation of gate voltages. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

π‐conjugated polymers having diaza[12]annulene rings and aminopenta‐2,4‐dienylidene groups generated by the ring opening of pyridinium rings

Reactions of N‐(2,4‐dinitrophenyl)pyridinium chloride with 2,5‐dimethyl‐1,4‐phenylenediamine in 1:2, 1:1.5, 1:1, and 2:1 molar ratios caused the ring opening of the pyridinium ring and thereby yielded polymers ( P1 – P4 ) consisting of 5‐(2,5‐dimethyl‐1,4‐phenylene)penta‐2,4‐dienylideneammonium chloride (unit A) and N‐2,5‐dimethyl‐1,4‐phenylene diaza[12]annulenium dichloride (unit B). The ¹H NMR spectra suggested that the composition ratios of unit A to unit B in P1 – P4 were 0.98:0.02, 0.94:0.06, 0.81:0.19, and 0.79:0.21, respectively. P1 – P4 showed an absorption maximum (λ_max) at a longer wavelength than the monomers because of the expansion of the π‐conjugation system. Films of P3 and P4 showed λ_max at a considerably longer wavelength than those in solution, and this was attributable to the ordered structures of the polymers in the solid state. Powder X‐ray diffraction analysis supported the ordered structures of P3 and P4 . Pellets molded from P3 and P4 exhibited a metallic luster, whereas those from P1 and P2 did not show such a luster. Cyclic voltammetry measurements indicated that P1 – P4 were electrochemically active in films. The thermal stability of the polymers depended on the composition ratios of unit A to unit B. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1507–1514, 2007     

Oligo(p‐phenyleneethynylene)‐based coil–rod–coil triblock copolymer: Synthesis and controlled self‐organization in solution

The self‐assembling ability of block copolymers offers an attractive strategy for the organization of π‐conjugated polymers. This article reports the synthesis of a coil–rod–coil triblock copolymer consisting of oligo(p‐phenyleneethynylene) as the rodlike segment and polystyrene as the coil‐like segment. The chemical structure of the afforded triblock copolymer has been fully characterized by various spectroscopic techniques such as NMR, Raman, gel permeation chromatography, differential scanning calorimetry, ultraviolet–visible, and fluorescence spectroscopy. The small‐angle neutron scattering and photophysical measurements indicate that this triblock copolymer exhibits unique solvatochromatic behaviors through the interplay of aggregation‐induced π–π stacking and planarization of the conjugated backbone. Supramolecular gel nanostructures have been produced via the controlled assembly of the polymer into H‐aggregates. It has been demonstrated that the use of the solvent composition to influence chain conformations and thus to manipulate the packing of the conjugated polymer blocks is important for achieving control in the assembly of conducting polymers and associated optical characteristics. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6007–6019, 2005     

Poly[2,7‐(9,9‐dihexylfluorene)‐alt‐pyridine] with donor‐acceptor architectures: A new series of blue‐light‐emitting alternating copolymers

A novel series of well‐defined alternating poly[2,7‐(9,9‐dihexylfluorenyl)‐alt‐pyridinyl] (PDHFP) with donor‐acceptor repeat units were synthesized using palladium (0)‐catalyzed Suzuki cross‐coupling reactions in good to high yields. In this series of alternating polymers, 2, 7‐(9,9‐dihexylfluorenyl) was used as the light emitting unit, and the electron deficient pyridinyl unit was employed to provide improved electron transportation. These polymers were characterized by ¹H‐NMR and ¹³C‐NMR, gel permeation chromatography (GPC), thermal analyses, and UV‐vis and fluorescence spectroscopy. The glass transition temperature of copolymers in nitrogen ranged from 110 to 148 °C, and the copolymers showed high thermal stabilities with high decomposition temperatures in the range of 350 to 390 °C in air. The difference in linkage position of pyridinyl unit in the polymer backbone has significant effects on the electronic and optical properties of polymers in solution and in film phases. Meta‐linkage (3,5‐ and 2,6‐linkage) of pyridinyl units in the polymer backbone is more favorable to polymer for pure blue emission and prevention of aggregation of polymer chain than para‐linkage (2,5‐linkage) of the pyridinyl units. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4792–4801, 2004     

Investigation of catalyst‐transfer condensation polymerization for the synthesis of n‐type π‐conjugated polymer,poly(2‐dioxaalkylpyridine‐3,6‐diyl)

Kumada‐Tamao coupling polymerization of 6‐bromo‐3‐chloromagnesio‐2‐(3‐(2‐methoxyethoxy)propyl)pyridine 1 with a Ni catalyst and Suzuki‐Miyaura coupling polymerization of boronic ester monomer 2 , which has the same substituted pyridine structure, with ^tBu₃PPd(o‐tolyl)Br were investigated for the synthesis of a well‐defined n‐type π‐conjugated polymer. We first carried out a model reaction of 2,5‐dibromopyridine with 0.5 equivalent of phenylmagnesium chloride in the presence of Ni(dppp)Cl₂ and then observed exclusive formation of 2,5‐diphenylpyridine, indicating that successive coupling reaction took place via intramolecular transfer of Ni(0) catalyst on the pyridine ring. Then, we examined the Kumada‐Tamao polymerization of 1 and found that it proceeded homogeneously to afford soluble, regioregular head‐to‐tail poly(pyridine‐2,5‐diyl), poly(3‐(2‐(2‐(methoxyethoxy)propyl)pyridine) (PMEPPy). However, the molecular weight distribution of the polymers obtained with several Ni and Pd catalysts was very broad, and the matrix‐assisted laser desorption ionization time‐of‐flight mass spectra showed that the polymer had Br/Br and Br/H end groups, implying that the catalyst‐transfer polymerization is accompanied with disproportionation. Suzuki‐Miyaura polymerization of 2 with ^tBu₃PPd(o‐tolyl)Br also afforded PMEPPy with a broad molecular weight distribution, and the tolyl/tolyl‐ended polymer was a major product, again indicating the occurrence of disproportionation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and properties of conjugated polymers containing 3,9‐ and 2,9‐linked carbazole units in the main chain

Novel conjugated polymers containing 3,9‐ or 2,9‐linked carbazole units in the main chain were synthesized by the polycondensation of ethynyl‐ and iodo‐substituted 9‐arylenecarbazolylene monomers, and their optical and electrical properties were studied. Polymers with weight‐average molecular weights of 3400–12,000 were obtained in 76–99% yields by the Sonogashira coupling polycondensation in piperidine or tetrahydrofuran (THF)/piperidine at 30 °C for 48 h. All the 3,9‐linked polymers absorbed light around 300 nm. The para‐phenylene‐linked polymer also absorbed light around 350 nm, while meta‐phenylene‐linked one did not. The 3,9‐linked polymers absorbed light at a wavelength longer than the 2,9‐linked one. The polymers emitted blue fluorescence with high quantum yields (0.21–0.78) upon excitation at the absorption maxima. The polymers were oxidized around 0.6 V, and reduced around 0.5 V. Poly( 1 ) showed the dark conductivity of 3.7 × 10^?11 S/cm (10³ V/cm). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3506–3517, 2009     

Novel isoindigo‐based conjugated polyelectrolytes: Synthesis and fluorescence quenching behavior with water‐soluble poly(p‐phenylenevinylene)s

Two novel ID‐based water‐soluble conjugated polymers (+)‐PIDPV and (?)‐PIDPV were synthesized by Heck coupling reaction. These two polyelectrolytes are both consisted of isoindigo units and phenylenevinylene units. In the UV–vis absorption spectra, both (+)‐PIDPV and (?)‐PIDPV exhibit broad absorption bands that almost cover the whole visible region. Photophysical investigations reveal that the fluorescence of water‐soluble PPV can be efficiently quenched by oppositely charged PIDPV at a very low concentration. Cationic PPV shows an efficient quenching effect with Κ_SV = 1.01 × 10⁶ M^?1 in the presence of (?)‐PIDPV while the anionic PPV gives a lager quenching constant with Κ_SV = 1.71 × 10⁶ M^?1 in the presence of (+)‐PIDPV. Furthermore, the blend films of water‐soluble PPVs and oppositely charged PIDPV also exhibit excellent quenching effect. These properties suggest that (+)‐PIDPV and (?)‐PIDPV are promising materials in the application of ionic photoactive layer in the organic solar cells. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2223–2237     

Highly luminescent diyne (?CC?CC?) containing hybrid polyphenyleneethynylene/poly(p‐phenylenevinylene) polymer: Synthesis and characterization

Luminophoric dialdehyde 1,4‐bis[4‐formylphenylethynyl‐(2,5‐dioctadecyloxyphenyl)‐buta‐1,3‐diyne] ( 4 ) enables the synthesis of diyne‐containing hybrid polyphenyleneethynylene/poly(p‐phenylenevinylene) polymer poly[1,4‐phenylene‐ethynylene‐1,4‐(2,5‐dioctadecyloxy)phenylene‐butadi‐1,3‐ynylene‐1,4‐(2,5‐dioctadecyloxy)phenylene‐ethynylene‐1,4‐phenylene‐ethene‐1,2‐diyl‐1,4‐(2,5‐dioctadecyloxy)phenylene‐ethene‐1,2‐diyl] ( 7 ) with a well‐defined general structure (? Ph? C?C? Ar? C?C? C?C? Ar? C?C? Ph? CH?CH? Ar? CH?CH? )_n, which was confirmed by NMR and infrared spectroscopy. The highly luminescent material is thermostable, soluble in usual organic solvents through the grafting of octadecyloxy side groups, and can be processed into transparent films. With the aim to investigate the effect of ? C?C? C?C? in the photophysical behavior of 7 , a comparison of the photophysics of monomers 3 [1,4‐bis(4‐formylphenylethynyl)‐2,5‐dioctadecyloxybenzene] and 4 and subsequently of their respective polymers 6 and 7 has been carried out. Similar photophysical behaviors for 6 (poly[1,4‐phenylenethynylene‐1,4‐(2,5‐dioctadecyloxyphenylene)ethene‐1,2‐diyl]) and 7 were observed in dilute CHCl₃ solution as a result of an identical chromophore system responsible for the absorption (λ_a = 448 nm) and emission (λ_f = 490 nm) in both compounds. The increased planarization and enhanced rigidity of the conjugated backbone in the solid state at room temperature as well as in frozen dilute tetrahydrofuran solution at 77 K cause the bathochromic shift of the absorption and emission spectra. The large octadecyloxy side chains obviously limit strong π‐π interchain interactions in the solid films, which explains the high fluorescence quantum yields of 35 and 52% obtained for 6 and 7 , respectively. The energetically arduous migration of the π electron through the diyne units not only requires a higher threshold voltage for the detection of photoconductivity in 7 but could possibly limit radiationless deactivation channels of the exciton, which explains the approximate 20% fluorescence quantum yields difference between 6 and 7 in the solid state. The electron‐withdrawing effect of the triple bonds confer both 6 and 7 with a good electron‐accepting property (E^ox = 1.39 V vs Ag/AgCl) if used in light‐emitting diode devices. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2670–2679, 2002     

New photoluminescent conjugated polymers with 1,4‐dioxo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (DPP) and 1,4‐phenylene units in the main chain

A series of π‐conjugated polymers and copolymers containing 1,4‐dioxo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (also known as 2,5‐dihydro‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole‐1,4‐dione) (DPP) and 1,4‐phenylene units in the main chain is described. The polymers are synthesised using the palladium‐catalysed aryl‐aryl coupling reaction (Suzuki coupling) of 2,5‐dihexylbenzene‐1,4‐diboronic acid with 1,4‐dioxo‐2,5‐dihexyl‐3,6‐di(4‐bromophenyl)pyrrolo[3,4‐c]pyrrole and 1,4‐dibromo‐2,5‐dihexylbenzene in different molar ratios. Soluble hairy rod‐type polymers with molecular weights up to 21 000 are obtained. Polymer solutions in common organic solvents such as chloroform or xylene are of orange colour (λ_max = 488 nm) and show strong photoluminescence (λ_max = 544 nm). The photochemical stability is found to be higher than for corresponding saturated polymers containing isolated DPP units in the main chain. Good solubility and processability into thin films render the compounds suitable for electronic applications.