Raman spectroscopy of ionic liquids derived from 1‐n‐butyl‐3‐methylimidazolium chloride and niobium chloride or zinc chloride mixtures

Anionic species formed in mixtures of 1‐n‐butyl‐3‐methylimidazolium chloride (BMICl) with different amounts of niobium pentachloride (NbCl₅) or zinc dichloride (ZnCl₂) were investigated by Raman spectroscopy. In the BMICl and NbCl₅ ionic mixtures the presence of the anion NbCl₆⁻ was detected for all compositions (molar fraction, X) and a mixture of this anion and the neutral Nb₂Cl₁₀ in acid ones. Two different anions were observed for basic mixtures of BMICl and ZnCl₂: ZnCl₄²⁻(0 < X < 0.35) and Zn₂Cl₆²⁻(X > 0.3), whereas for acidic ones three species were detected: Zn₂Cl₆²⁻(X < 0.7), Zn₃Cl₈²⁻(X > 0.7) and Zn₄Cl₁₀²⁻(X > 0.7). It has also been observed that in both cases, the formation of larger anions causes a shift of the C H stretching modes to higher wavenumbers as the result of a decrease in the hydrogen bond between Cl and the hydrogens from the cation. Copyright © 2008 John Wiley & Sons, Ltd.     

Ionic liquid structure: the conformational isomerism in 1‐butyl‐3‐methyl‐imidazolium tetrafluoroborate ([bmim][BF4])

As a probe of local structure, the vibrational properties of the 1‐butyl‐3‐methylimidazolium tetrafluoroborate [bmim][BF₄] ionic liquid were studied by infrared (IR), Raman spectroscopy, and ab initio calculations. The coexistence of at least four [bmim]⁺ conformers (GG, GA, TA, and AA) at room temperature was established through unique spectral responses. The Raman modes characteristic of the two most stable [bmim]⁺ conformers, GA and AA, according to the ab initio calculations, increase in intensity with decreasing temperature. To assess the total spectral behavior of the ionic liquid both the contributions of different [bmim]⁺ conformers and the [bmim]⁺− [BF₄]⁻ interactions to the vibrational spectra are discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Lithium solvation and diffusion in the 1‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide ionic liquid

The Raman spectra of (1 − x)(BMITFSI), xLiTFSI ionic liquids, where 1‐butyl‐3‐methylimidazolium cation (BMI⁺) and bis(trifluoromethane‐sulfonyl)imide anion (TFSI⁻) are analyzed for LiTFSI mole fractions x < 0.4. As expected from previous studies on similar TFSI‐based systems, most lithium ions are shown to be coordinated within [Li(TFSI)₂]⁻ anionic clusters. The variation of the self‐diffusion coefficients of the ¹H, ¹⁹F, and ⁷Li nuclei, measured by pulsed‐gradient spin‐echo NMR (PGSE‐NMR) as a function of x, can be rationalized in terms of the weighted contribution of BMI⁺ cations, TFSI⁻ ‘free’ anions, and [Li(TFSI)₂]⁻ anionic clusters. This implies a negative transference number for lithium. Copyright © 2008 John Wiley & Sons, Ltd.     

Raman and ab initio study of the conformational isomerism in the 1‐ethyl‐3‐methyl‐imidazolium bis(trifluoromethanesulfonyl)imide ionic liquid

The calculated and experimental Raman spectra of the (EMI⁺)TFSI⁻ ionic liquid, where EMI⁺ is the 1‐ethyl‐3‐methylimidazolium cation and TFSI⁻ the bis(trifluoromethanesulfonyl)imide anion, have been investigated for a better understanding of the EMI⁺ and TFSI⁻ conformational isomerism as a function of temperature. Characteristic Raman lines of the planar (p) and non‐planar (np) EMI⁺ conformers are identified using the reference (EMI⁺)Br⁻ salt. The anion conformer of C₂ symmetry is confirmed to be more stable than the cis (C₁) one by 4.5 ± 0.2 kJ mol⁻¹. At room temperature, the population of trans (C₂) anions and np cations is 75 ± 2% and 87 ± 4%, respectively. Fast cooling quenches a metastable glassy phase composed of mainly C₂ anion conformers and p cation conformers, whereas slow cooling gives a crystalline phase composed of C₁ anion conformers and of np cation conformers. Copyright © 2006 John Wiley & Sons, Ltd.     

Mechanistic study on Mo(CO)6‐catalyzed intramolecular [2 + 2] or [2 + 2 + 1] cycloaddition reaction of 5‐allenyl‐1‐ynes

By means of density functional theory, the Mo(CO)₆‐catalyzed intramolecular [2 + 2] or [2 + 2 + 1] cycloaddition reaction of 5‐allenyl‐1‐ynes was investigated. All the intermediates and transition states were optimized completely at B3LYP/6‐311++G(d,p) level (LANL2DZ(f) for Mo). Calculations indicate that the complexation of 5‐allenyl‐1‐ynes with Mo(CO)₆ occurred preferentially at the triple bond to give the complex M1 and then the complexation with the distal double bond of the allenes generates the complex M5 . In this reaction, Mo(CO)₆‐catalyzed intramolecular [2 + 2] cycloaddition is more favorable than [2 + 2 + 1] cycloaddition. The reaction pathway Mo(CO)₆ + R → M5 → T7 → M12 → M13 → T11 → M18 → P4 is the most favorable one, and the most dominant product predicted theoretically is P4 . The solvation effect is remarkable, and it decreases the reaction energy barriers. Copyright © 2011 John Wiley & Sons, Ltd.     

X‐ray spectroscopy for chemistry in the 2‐4 keV energy regime at the XMaS beamline: ionic liquids,Rh and Pd catalysts in gas and liquid environments,and Cl contamination in γ‐Al2O3

The 2–4 keV energy range provides a rich window into many facets of materials science and chemistry. Within this window, P, S, Cl, K and Ca K‐edges may be found along with the L‐edges of industrially important elements from Y through to Sn. Yet, compared with those that cater for energies above ca. 4–5 keV, there are relatively few resources available for X‐ray spectroscopy below these energies. In addition, in situ or operando studies become to varying degrees more challenging than at higher X‐ray energies due to restrictions imposed by the lower energies of the X‐rays upon the design and construction of appropriate sample environments. The XMaS beamline at the ESRF has recently made efforts to extend its operational energy range to include this softer end of the X‐ray spectrum. In this report the resulting performance of this resource for X‐ray spectroscopy is detailed with specific attention drawn to: understanding electrostatic and charge transfer effects at the S K‐edge in ionic liquids; quantification of dilution limits at the Cl K‐ and Rh L₃‐edges and structural equilibria in solution; in vacuum deposition and reduction of [Rh^I(CO)₂Cl]₂ to γ‐Al₂O₃; contamination of γ‐Al₂O₃ by Cl and its potential role in determining the chemical character of supported Rh catalysts; and the development of chlorinated Pd catalysts in `green' solvent systems. Sample environments thus far developed are also presented, characterized and their overall performance evaluated.     

Lithium solvation in a PMMA membrane plasticized by a lithium‐conducting ionic liquid based on 1‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide

The Raman and Infrared (IR) spectra of poly(methyl methacrylate) (PMMA) membranes plasticized by ionic liquids of the (1 − x)[1‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (BMITFSI)],xLiTFSI type, where BMI⁺ is the 1‐butyl‐3‐methylimidazolium cation and TFSI⁻ the bis(trifluoromethanesulfonyl)imide anion, are analyzed for a lithium bis(trifluoromethane sulfone)imide (LiTFSI) mole fraction x = 0.23 and PMMA contents from 0 to 50 wt%. The lithium is found to have an average coordination of about three CO groups and less than one TFSI⁻ anion. It plays the role of a cross‐linker between the ester groups of PMMA and the nonvolatile ionic liquid. Addition of PMMA to the (1 − x)(BMITFSI),xLiTFSI ionic liquid lowers the conductivity but might improve the lithium transference number by transforming the [Li(TFSI)₂]⁻ anionic clusters present in the pure ionic liquid into a mixed coordination by ester groups and TFSI⁻ anions. Copyright © 2008 John Wiley & Sons, Ltd.     

Solvation of AgTFSI in 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquid investigated by vibrational spectroscopy and DFT calculations

In this paper we investigate the solvation of silver bis(trifluoromethylsulfonyl)imide salt (AgTFSI) in 1‐ethyl‐3‐methylimidazolium TFSI [EMI][TFSI] ionic liquid by combining Raman and infrared (IR) spectroscopies with density functional theory (DFT) calculations. The IR and Raman spectra were measured in the 200–4000 cm⁻¹ spectral region for AgTFSI/[EMI][TFSI] solutions with different concentrations ([AgTFSI] <0.2 mole fraction). The analysis of the spectra shows that the spectral features observed by dissolution of AgTFSI in [EMI][TFSI] solution originate from interactions between the Ag⁺ cation and the first neighboring TFSI anions to form relatively stable Ag complexes. The ‘gas phase’ interaction energy of a type [Ag(TFSI)₃]²⁻ complex was evaluated by DFT calculations and compared with other interionic interaction energy contributions. The predicted spectral signatures because of the [Ag(TFSI)₃]²⁻ complex were assessed in order to interpret the main IR and Raman spectral features observed. The formation of such complexes leads to the appearance of new interaction‐induced bands situated at 753 cm⁻¹ in Raman and at 1015 and 1371 cm⁻¹ in IR, respectively. These specific spectral signatures are associated with the ‘breathing’ mode and the S–N–S and S–O stretching modes of the TFSI anions engaged in the complex. Finally, all these findings are discussed in terms of interaction mechanisms enabling the electrodeposition characteristics of silver from AgTFSI/[EMI][TFSI] IL‐based electrolytic solutions. Copyright © 2015 John Wiley & Sons, Ltd.     

Sonochemical synthesis and characterization of Co3O4 nanocrystals in the presence of the ionic liquid [EMIM][BF4]

For the first time, a sonochemical process has been used to synthesis cobalt oxide Co₃O₄ nanoflowers and nanorods morphology in the presence of the ionic liquid 1-Ethyl-3-methylimidazolium tetrafluoroborate [EMIM][BF₄] as reaction media and morphology template. Different sonication time periods and different molar ratios of the ionic liquid (IL) were used to investigate their effects on the structural, optical, chemical and magnetic properties of the produced Co₃O₄ nanoparticles. During synthesis process brown powder contains cobalt hydroxide Co(OH)₂ and cobalt oxyhydroxide (Cobalt hydroxide oxide) CoO(OH) was formed, after calcination in air for 4 h at 400 °C a black powder of Co₃O₄ nanoparticles was produced. The produced Co₃O₄ nanoparticles properties were characterized by X-ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM), transmission electron microscopy (TEM), FTIR spectroscopy, UV–vis spectroscopy, and Vibrating Sample Magnetometer (VSM). To explain the formation mechanism of Co₃O₄ NPs some investigations were carried on the brown powder before calcination.     

Role of gemini surfactants (m‐s‐m type; m = 16, s = 4–6) on the reaction of [Zn(II)‐Gly‐Phe]+ with ninhydrin

In the present paper, reaction of zinc‐glycylphenylalanine ([Zn(II)‐Gly‐Phe]⁺) with ninhydrin has been investigated in gemini (m‐s‐m type; m = 16, s = 4–6) surfactants at temperature (70 °C) and pH (5.0). Monitoring the appearance of product at 400 nm was used to follow the kinetics, spectrophotometrically. The order of the reaction with respect to [Zn(II)‐Gly‐Phe]⁺ was unity while with respect to [ninhydrin] was fractional. The reaction constants involved in the mechanism were obtained. In addition to the rate constant (k_Ψ) increase and leveling‐off regions are observed with the geminis, just like as seen with conventional surfactant hexadecyltrimethylammonium bromide (CTAB), the former produced a third region of increasing k_Ψ at higher concentrations. A close agreement between observed and calculated rate constants was found under varying experimental conditions. A suitable mechanism consistent with the experimental findings has been proposed. Copyright © 2014 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering of 4‐mercaptopyridine on sub‐monolayers of α‐Fe2O3 nanocrystals (sphere,spindle, cube)

We report surface‐enhanced Raman scattering (SERS) spectra from 4‐mercaptopyridine (4‐Mpy) adsorbed on sub‐monolayers of α‐Fe₂O₃ nanocrystals (sphere, spindle, cube). The maximum enhancement factor has been estimated to be about 10⁴ compared to that of 4‐Mpy in solution. A possible mechanism has been proposed that the charge transfer between the α‐Fe₂O₃ nanocrystals and the 4‐Mpy molecules is most likely responsible for the observed enhancement of Raman intensity of adsorbed 4‐Mpy molecules as surface plasmon resonances have not occurred. Copyright © 2009 John Wiley & Sons, Ltd.     

Crystal structures of 3‐methyl‐2(1H)‐quinoxalinone and three substituted derivatives

3‐Methyl‐2(1H)‐quinoxalinone and three derivatives (3,7‐dimethyl‐2(1H)‐quinoxalinone, 3‐methyl‐6,7‐dichloro‐2(1H)‐quinoxalinone and 3‐methyl‐7‐nitro‐2(1H)‐quinoxalinone) have been synthesised and analysed by ¹H NMR and IR spectral spectroscopies. The crystal structures have been determined at room temperature from X‐ray single crystal diffraction data for three of them and from powder diffraction data for the nitro derivative. 3‐Methyl‐2(1H)‐quinoxalinone crystallises in the P2₁/c monoclinic system, 3,7‐dimethyl‐2(1H)‐quinoxalinone in the Pbca orthorhombic system and the two others compounds in the P$\overline {1} $ triclinic system. For the nitro derivative, C? H$\cdots $ N short contacts are established between the carbon of the methyl and the double bounded nitrogen of the ring. For the three other compounds N? H$\cdots $ O hydrogen bonds involve the atoms of the heterocyclic ring. Copyright © 2011 John Wiley & Sons, Ltd.     

The ν3 − ν4 difference band contribution to the CCl4 symmetric stretch (ν1) mode

The Raman spectrum of the symmetric stretching vibration (ν₁) of liquid carbon tetrachloride observed at 295 K and reported repeatedly over the last 80 years clearly shows four of the five more abundant isotopomers at 440–470 cm⁻¹. At the lower energy end of this spectrum, additional intensity due to isotopomeric contributions from the symmetric stretch for v = 1 → 2 (hotbands) partially overlaps the prominent v = 0 → 1 features, and accounts for about 18% of the integrated intensity at 295 K in agreement with theory. When these two patterns are modeled and subtracted from the experimental spectrum, a feature underlying almost exactly the C³⁵Cl₄ (v = 0 → 1) band at 462.5 cm⁻¹ becomes apparent. We propose that this feature is the ν₃ − ν₄ difference band. Observations at lower temperatures, and of the combination bands, and the polarized Raman spectra are consistent with this hypothesis. Copyright © 2014 John Wiley & Sons, Ltd.     

Calculated polar substituent effects on the stability of 3‐substituted(X) bicyclo[1.1.1]pent‐1‐yl cations and 4‐substituted(X) bicyclo[2.2.1]hept‐1‐yl cations: a DFT study

The effects of substituents on the stability of 3‐substituted(X) bicyclo[1.1.1]pent‐1‐yl cations (3) and 4‐substituted(X) bicyclo[2.2.1]hept‐1‐yl cations (4), for a set of substituents (X = H, NO₂, CN, NC, CF₃, CHO, COOH , F, Cl, HO, NH₂, CH₃, SiH₃, Si(CH₃)₃, Li, O^?, and NH₃⁺) covering a wide range of electronic substituent effects were calculated using the DFT theoretical model at the B3LYP/6‐311 + G(2d,p) and B3LYP/6‐31 + G (d) levels of theory, respectively. Linear regression analysis was employed to explore the relationship between the calculated relative hydride affinities (ΔE, kcal/mol) of the appropriate isodesmic reactions for 3/4 and polar field/group electronegativity substituent constants (σ_F and σ_χ, respectively). The analysis reveals that the ΔE values for both systems are best described by a combination of both substituent constants. The result highlights the importance of the σ_χ dependency of charge delocalization in these systems. Copyright © 2012 John Wiley & Sons, Ltd.     

Extended X‐ray absorption fine structure and multiple‐scattering simulation of nickel dithiolene complexes Ni[S2C2(CF3)2]2n (n = −2, −1, 0) and an olefin adduct Ni[S2C2(CF3)2]2(1‐hexene)

A series of Ni dithiolene complexes Ni[S₂C₂(CF₃)]₂ⁿ (n = ?2, ?1, 0) ( 1 , 2 , 3 ) and a 1‐hexene adduct Ni[S₂C₂(CF₃)₂]₂(C₆H₁₂) ( 4 ) have been examined by Ni K‐edge X‐ray absorption near‐edge structure (XANES) and extended X‐ray absorption fine‐structure (EXAFS) spectroscopies. Ni XANES for 1 – 3 reveals clear pre‐edge features and approximately +0.7 eV shift in the Ni K‐edge position for `one‐electron' oxidation. EXAFS simulation shows that the Ni—S bond distances for 1 , 2 and 3 (2.11–2.16 Å) are within the typical values for square planar complexes and decrease by ～0.022 Å for each `one‐electron' oxidation. The changes in Ni K‐edge energy positions and Ni—S distances are consistent with the `non‐innocent' character of the dithiolene ligand. The Ni—C interactions at ～3.0 Å are analyzed and the multiple‐scattering parameters are also determined, leading to a better simulation for the overall EXAFS spectra. The 1‐hexene adduct 4 presents no pre‐edge feature, and its Ni K‐edge position shifts by ?0.8 eV in comparison with its starting dithiolene complex 3 . Consistently, EXAFS also showed that the Ni—S distances in 4 elongate by ～0.046 Å in comparison with 3 . The evidence confirms that the neutral complex is `reduced' upon addition of olefin, presumably by olefin donating the π‐electron density to the LUMO of 3 as suggested by UV/visible spectroscopy in the literature.     

Facile Synthesis of Gd(OH)3‐Doped Fe3O4 Nanoparticles for Dual‐Mode T1‐ and T2‐Weighted Magnetic Resonance Imaging Applications

The facile hydrothermal synthesis of polyethyleneimine (PEI)‐coated iron oxide (Fe₃O₄) nanoparticles (NPs) doped with Gd(OH)₃ (Fe₃O₄‐Gd(OH)₃‐PEI NPs) for dual mode T₁‐ and T₂‐weighted magnetic resonance (MR) imaging applications is reported. In this approach, Fe₃O₄‐Gd(OH)₃‐PEI NPs are synthesized via a hydrothermal method in the presence of branched PEI and Gd(III) ions. The PEI coating onto the particle surfaces enables further modification of poly(ethylene glycol) (PEG) in order to render the particles with good water dispersibility and improved biocompatibility. The formed Fe₃O₄‐Gd(OH)₃‐PEI‐PEG NPs have a Gd/Fe molar ratio of 0.25:1 and a mean particle size of 14.4 nm and display a relatively high r₂ (151.37 × 10^?3m ^?1 s^?1) and r₁ (5.63 × 10^?3m ^?1 s^?1) relaxivity, affording their uses as a unique contrast agent for T₁‐ and T₂‐weighted MR imaging of rat livers after mesenteric vein injection of the particles and the mouse liver after intravenous injection of the particles, respectively. The developed Fe₃O₄‐Gd(OH)₃‐PEI‐PEG NPs may hold great promise to be used as a contrast agent for dual mode T₁‐ and T₂‐weighted self‐confirmation MR imaging of different biological systems.     

Near‐forward/high‐pressure‐backward Raman study of Zn1 − xBexSe (x ~ 0.5) – evidence for percolation behavior of the long (Zn―Se) bond

The apparently universal 1‐bond → 2‐mode percolation behavior in the Raman spectra of zincblende semiconductor alloys is generally observed for the short bond only, and not for the long one. In this work we perform a combined high‐pressure‐backward/near‐forward Raman study of the leading percolation‐type (Zn,Be)Se alloy (~50 at.% Be), which exhibits a distinct percolation doublet in the spectral range of its short Be―Se bond, in search of a Zn―Se analogue. The high‐pressure‐backward insight is not conclusive per se, but clarifies the perspective behind the near‐forward Raman study. The latter reveals an unique Zn―Se phonon–polariton. Its fair contour modeling depending on the scattering angle is achieved within the linear dielectric approach, based on ellipsometry measurement of the ZnBeSe refractive index. Somewhat surprisingly this reveals that the phonon–polariton in question is a ‘fractional’ one in that it carries only half of the available Zn―Se oscillator strength, as ideally expected in case of a BeSe‐like bimodal Raman behavior of the long Zn―Se bond. Copyright © 2015 John Wiley & Sons, Ltd.     

Solvatochromism of 2‐(N,N‐dimethylamino)‐7‐nitrofluorene and the natural dye β‐carotene: application for the determination of solvent dipolarity and polarizability

The effects of solvents on chemical phenomena (rate and equilibrium constants, spectroscopic transitions, etc.) are conveniently described by solvation free‐energy relationships that take into account solvent acidity, basicity and dipolarity/polarizability. The latter can be separated into its components by manipulating the UV–vis spectra of two solvatochromic probes, 2‐(N,N‐dimethylamino)‐7‐nitrofluorene (DMANF) and a di‐(tert‐butyl)‐tetramethyl docosanonaen probe (ttbP9) whose synthesis is laborious and expensive. Recently, we have shown that the natural dye β‐carotene can be conveniently employed instead of ttbP9 for the determination of solvent polarizability (SP) of 76 molecular solvents and four ionic liquids. In the present work, we report the polarizabilities of further 24 solvents. Based on the solvatochromism of β‐carotene and DMANF, we have calculated solvent dipolarity (SD) for 103 protic and aprotic molecular solvents, and ionic liquids. The dependence of SD and SP on the number of carbon atoms in the acyl‐ or alkyl group of several homologous series (alcohols; 2‐alkoxyethanols; carboxylic acid‐ anhydrides, and esters, ionic liquids) is calculated and briefly discussed. Copyright © 2013 John Wiley & Sons, Ltd.