Core‐shell nanoparticles with hyperbranched poly(arylene‐oxindole) interiors

Core‐shell type star polymers composed of poly(tert‐butyl acrylate) (poly(t‐BuA)) arms and 100% hyperbranched poly(arylene‐oxindole) interiors were synthesized via the “core‐first” method. Atom transfer radical polymerization of t‐BuA initiated by 2‐bromopropionyl terminal groups of the hyperbranched core was applied for the synthesis of the stars. The resultant star structures were characterized by gel permeation chromatography with triple detection. Polymers of molar masses M_n up to 1.68 × 10⁵ g/mol were obtained. The obtained star polymers compared with the linear counterparts of the same molar mass have a much more compact structure in solution. The intrinsic viscosities of the stars are also significantly lower than their linear counterparts. Light scattering experiments were performed to provide information about the size of these macromolecules in solution. Preliminary characterization of the thermal properties of these novel materials is also reported. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1120–1135, 2009     

Manipulation of the molecular weight and branching structure of hyperbranched poly(arylene ether phosphine oxide)s prepared via an A2 + B3 approach

A series of hyperbranched poly(arylene ether phosphine oxide)s (HB PAEPOs) were prepared via an A₂ + B₃ polymerization scheme with tris(4‐fluorophenyl)phosphine oxide as B₃, and a variety of bisphenols as A₂. The effects of the reactivity of the A₂ monomer, the A:B ratio, the addition mode, the solvent, and the concentration on the final molecular weight, polydispersity index (PDI), and degree of branching (DB) were studied. Soluble HB PAEPOs with weight‐average molecular weights of up to 299,000 Da were achieved. Reactions in which the A₂ component was added slowly resulted in lower DBs (0.2–0.5), whereas the slow addition of the B₃ component provided samples with DBs of approximately 0.75. Reactions performed under high‐dilution conditions afforded completely soluble materials with weight‐average molecular weights of 9000–12,100 Da and PDI values as low as 2.20. The molecular weights achieved under high‐dilution conditions were independent of the mode of monomer addition. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3871–3881, 2003     

Star macromolecules with hyperbranched poly(arylene oxindole) cores and polyacid arms: Synthesis and solution behavior

The synthesis of pH‐sensitive star polymers with 100% hyperbranched cores and polyacrylic or polymethacrylic acid arms is reported. A series of stars obtained via atom transfer polymerization of tert‐butyl acrylate and methacrylate onto poly(arylene oxindole)s were subjected to acidic hydrolysis to obtain structures with polyacid arms. The obtained polyacid stars were characterized by NMR and FTIR spectroscopy. Dynamic and static light scattering experiments were performed to provide information regarding the shape of these macromolecules in solution. In an aqueous solution, the stars formed aggregates with a radius of gyration reaching 130 nm and aggregation numbers of up to 280 stars per particle. Similar to other polyacid‐based copolymers with different branched topologies, the dimensions and aggregation numbers were found to decrease with increasing pH. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and micellization of star‐like hyperbranched polymer with poly(ethylene oxide) and poly(ε‐caprolactone) arms

Novel star‐like hyperbranched polymers with amphiphilic arms were synthesized via three steps. Hyperbranched poly(amido amine)s containing secondary amine and hydroxyl groups were successfully synthesized via Michael addition polymerization of triacrylamide (TT) and 3‐amino‐1,2‐propanediol (APD) with feed molar ratio of 1:2. ¹H, ¹³C, and HSQC NMR techniques were used to clarify polymerization mechanism and the structures of the resultant hyperbranched polymers. Methoxyl poly(ethylene oxide) acrylate (A‐MPEO) and carboxylic acid‐terminated poly(ε‐caprolactone) (PCL) were sequentially reacted with secondary amine and hydroxyl group, and the core–shell structures with poly(1TT‐2APD) as core and two distinguishing polymer chains, PEO and PCL, as shell were constructed. The star‐like hyperbranched polymers have different sizes in dimethyl sulfonate, chloroform, and deionized water, which were characterized by DLS and ¹H NMR. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1388–1401, 2008     

Synthesis of unimolecular reversed micelle consisting of a poly(L‐lactide) shell and hyperbranched D‐mannan core

A novel biodegradable unimolecular reversed micelle consisting of a poly(L ‐lactide) (PLA) shell and a hyperbranched D ‐mannan (HBM) core, that is, a chestnut‐shaped polymer (PLA–HBM), was synthesized by the polymerization of L ‐lactide on HBM with 4‐(dimethylamino)pyridine (DMAP) as the catalyst. The obtained polymers were soluble in dimethyl sulfoxide, tetrahydrofuran, and chloroform but insoluble in H₂O. The molecular weights of the PLA chain on PLA–HBM tended to increase with increasing polymerization time. The number of PLA chains on PLA–HBM could be controlled by the ratio of DMAP to the sugar unit in HBM. The obtained copolymer, PLA–HBM, acted as a unimolecular reversed micelle with an encapsulation ability toward the hydrophilic molecule. In addition, the entrapped hydrophilic molecules were slowly released from the core of PLA–HBM, and the release rate was accelerated by the breaking of the PLA chains of the shell when proteinase K as a hydrolase of PLA was used. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 406–413, 2006     

Unimolecular micelles and reverse micelles based on hyperbranched polyethers—Comparative study of AB2 + A‐R and A2 + B3 + A‐R type strategies

Core‐shell type hyperbranched polymers that are capable of forming unimolecular micelles and reverse micelles in aqueous and hydrocarbon medium, respectively, were synthesized via two approaches, namely AB₂ + A‐R and A₂ + B₃ + A‐R type copolymerizations. In case of micelle‐forming polymers, an AB₂ monomer carrying a decamethylene spacer was used along with heptaethylene glycol monomethyl ether (HPEG) as the A‐R type comonomer. One the other hand, for the preparation of reverse micelle‐forming polymers, an AB₂ monomer containing an oligo(oxyethylene) spacer was used along with cetyl alcohol as the A‐R type comonomer. The former was readily soluble in water while the latter was soluble in hydrocarbon solvents like hexane. NMR spectral studies confirmed that both the approaches generated highly branched structures wherein about 65–70% of the terminal B groups were capped by the A‐R comonomer. Dye‐uptake measurements revealed that the polymers prepared via the AB₂ + A‐R approach exhibited a significantly larger uptake compared with those prepared via the A₂ + B₃ + A‐R approach. This suggests that the AB₂ + A‐R approach generates hyperbranched polymers with better defined core‐shell topology when compared with polymers prepared via the A₂ + B₃ + A‐R approach, which is in accordance with previous studies that suggest that A₂ + B₃ approach yields polymers with significantly lower branching levels and consequently less compact structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 80–91, 2009     

Synthesis and characterization of new poly(ethyleneimine)‐g‐poly(methyl methacrylate) star‐block copolymers with hyperbranched cationic core

Hyperbranched polyethyleneimine (hb‐PEI) is used as polymeric scaffold to synthesize new PEI‐g‐polymethylmethacrylate (PEI‐g‐PMMA) block copolymers, consisting of a hyperbranched, partially quarternized cationic core, and PMMA‐arms. The arms are grafted to the PEI scaffold by means of the “grafting to” method. Ammonium groups, covalently bond to the hyperbranched core, provide good adhesion to negatively charged surfaces, even in case of low‐surface charges. The PMMA strands provide compatibility of the macromolecules to PMMA matrices, hence generating potential dispersants, and compatibilizers for PMMA. A peculiar association behavior in organic solution is observed as supported by dynamic light scattering and DOSY measurements. First evidences of the applicability of the macromolecules as dispersants to prepare PMMA‐nanocomposites are given. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3700–3715     

Preparation of linear and hyperbranched fluorinated poly(aryl ether‐thioether) through para‐fluoro‐thiol click reaction

The para‐fluoro‐thiol “click” reaction (PFTCR) was utilized to prepare linear and hyperbranched fluorinated poly (aryl ether‐thioether). For this purpose, 1,2‐bis(perfluorophenoxy)ethane was prepared and reacted with 1,6‐hexandithiol and trimethylolpropane tris(3‐mercaptopropionate), respectively. While hyperbranched polymers were prepared using 0.5 M concentrations of starting materials at room temperature, the linear polymer syntheses were performed at different reaction temperatures and concentrations. The resulting polymers were mainly characterized by NMR measurements and a very distinct fluorine signals regarding meta‐ and ortho‐ positions in the ¹⁹F NMR were found for both polymer topologies. In addition to NMR analyses, both linear and hyperbranched polymers were further characterized by using Fourier transform infrared spectroscopy (FT‐IR), gel permeation chromatography (GPC), and differential scanning calorimetry (DSC). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1853–1859     

Photoactive liquid crystalline polymers: A comprehensive study of linear and hyperbranched polymers synthesized by A2B2, A2B3, A3B2, and A3B3 approaches

A series of linear and hyperbranched polyester epoxies, with varied structural parameters such as kinked structure and different dendritic architectures, were synthesized by A₂ + B₂, A₂ + B₃, A₃ + B₂, and A₃ + B₃ approaches. The structures of synthesized monomers and polymers were confirmed by Fourier transform infrared, ¹H NMR, and ¹³C NMR spectroscopic techniques. The effect of varied structural parameters on phase behavior and photoresponsive properties was investigated by using differential scanning calorimeter, thermal optical polarized microscope, UV–visible spectroscopy, photoviscosity, and refractive index studies. The transition temperatures of hyperbranched polymers were higher than that of the corresponding linear analogues. All the polymers showed nematic phase (nematic droplets) over a broad temperature range. The effect of kinked structural unit on photoresponsive property is less in both linear and hyperbranched architectures. Although the effect of architectural nature is highly considerable within the hyperbranched architectures, the polymer (HPE–33) synthesized by A₃ + B₃ approach showed highest rate of photocrosslinking, followed by HPE–I 32; HPE–T 32, and HPE–23, which were synthesized by A₃ + B₂ and A₂ + B₃ approaches, respectively. The findings in photoresponsive properties were further supported by molecular modeling studies. Substantial variation of refractive index (0.015–0.024) indicates that these polymers could be used for optical recording. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Novel method for the preparation of core-shell nanoparticles with movable Ag core and polystyrene loop shell

Core/shell nanoparticles with movable silver (Ag) core and polystyrene (PSt) shell (Ag@PSt nanoparticle) were successfully synthesized at room temperature and under ambient pressure via two steps: γ-irradiation and interfacial-initiated polymerization. Firstly, mono-dispersed Ag nanoparticles with diameters 20 nm were synthesized in inversed microemulsion by reducing silver nitrate under γ-irradiation. Then, Ag nanoparticles were coated with PSt via interfacial-initiated polymerization with cumene hydroperoxide/ferrous sulfate/disodium ethylenediaminetetraacetate/sodium formaldehyde sulfoxylate (CHPO-Fe²⁺-EDTA-SFS) as the redox initiation pair. The resulted Ag@PSt nanoparticles were identified by transmission electron microscopy (TEM), dynamic light scattering (DLS), X-ray powder diffraction (XRD) and X-ray photoelectron spectroscopy (XPS).     

Hyperbranch‐polyethyleniminated functional polymers. I. Synthesis,characterization of novel ABA type of dumbbell‐like polyethyleniminated polyoxypropylenediamines,and their complexing properties with copper(II) ions in aqueous solution

Novel ABA‐type dumbbell‐like water‐soluble copolymers [D230(EI)₄, D400(EI)₄, and D400(EI)₈] were synthesized by introducing ethylenimine (EI) groups into both sides of polyoxypropylenediamines via a simple in situ ethylamination of polyoxypropylenediamine with 2‐chloroethylamine hydrochloride. The structures of the resultant polymers were identified by Fourier transform infrared spectroscopy and ¹H NMR. The percentages of primary, secondary, and tertiary amine present were determined by the potentiometric titration method after treatments with the appropriate chemicals of salicylaldehyde and acetic anhydride. The surface tension and solubilizing behavior of pyrene in the presence of these polymers in aqueous medium were also investigated, and the efficiency to reduce the surface tension and solubilizing behavior of pyrene depends on the attachments of EI to polymer backbone. The chelating properties of these polymers were examined quantitatively by ultraviolet–visible (UV–vis) spectroscopy in the presence of Cu²⁺ ions in aqueous solution, and continuous variation analysis revealed that the most stable complex is formed at the normality ratio of [N]/[Cu²⁺] = 3.0. UV–vis spectroscopy and transmission electron microscopy were used to evaluate the dumbbell‐like water‐soluble copolymer, D400(EI)₈, as a stabilizer for preparing colloidal noble metal nanoparticles (Au and Pt) in aqueous solution. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1360–1370, 2003     

Homopolycyclotrimerization of A4‐type tetrayne: A new approach for the creation of a soluble hyperbranched poly(tetraphenylethene) with multifunctionalities

A tetraphenylethene‐containing A₄‐type tetrayne, named 1,1,2,2‐tetrakis(4‐ethynylphenyl)ethene is synthesized and its TaCl₅‐Ph₄Sn catalyzed homopolycyclotrimerization affords hyperbranched poly(tetraphenylethene) with high molecular weight (M_w = 280,000) in high yield (97%). The polymer shows good solubility and high thermal stability. It is aggregation‐enhanced emission (AEE)‐active and functions as a fluorescent chemosensor for explosive detection with a superamplification effect and large quenching constants up to 758,000 M^?1. The polymer shows high and tunable refractive indices (RI = 1.9288?1.6746) in a wide wavelength region. Porous fluorescent polymer thin film is prepared by breath figure (BF) methods and real‐time monitoring of the elusive BF formation process is realized. Photolithography of the thin films readily generates well‐resolved fluorescent photopattern without and with porous secondary structure. The polymer is metallified and pyrolysed to give magnetic ceramics with high magnetic susceptibilities (M_s = 83 emu/g) and near‐zero coercivity (H_c = 0.08 kOe). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4752–4764     

Kinetic topology‐selective encapsulation and mixture separation by a nanocapsule with hyperbranched polyethylenimine as core and polystyrene as shell

Topology‐selective encapsulation of a guest is generally exclusively achieved by a well‐defined host. In this article, a macromolecular reverse micelle (PEI@PS), with a hyperbranched polyethylenimine (PEI) as core and polystyrenes (PSs) as shell, is prepared and shown with excellent encapsulation and separation abilities. It is found that the encapsulation and phase transfer is kinetically dependent on the size of the dyes, creating a time window for the separation of dyes. All the experimental results show that the thickness and density of shell plays the most important roles in guest selectivity. In addition, highly size‐selective release is also found. This macromolecular reverse micelle (PEI@PS) can find useful applications in the liquid–liquid or solid–liquid extraction separation, especially for the latter.© 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1273–1281     

Preparation and characterization of Ag(Au) bimetallic core–shell nanoparticles with new seed growth method

Ag(Au) bimetallic core–shell nanoparticles were prepared by a new seed growth method. Ascorbic acid was used to reduce the complex of HAuCl₄ and hexadecyltrimethylammoniumbromide (CTAB). This resulted in the forming of colorless Au(I) (AuCl₂⁻). It was used as the growth solution to prepare these bimetallic core–shell nanoparticles. These nanoparticles were characterized by UV–vis spectroscopy, transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The results showed these nanoparticles exhibited core–shell shape and there was large amount of Ag in the shell. These nanoparticles could be produced in a few minutes without violent stirring and the method was easy and convenient compared with others. The effect of amount of AuCl₂⁻ on the shape of nanoparticles was also studied. Many small gold nanoparticles were formed on the surface of bimetallic core–shell nanoparticles in the presence of excess AuCl₂⁻. The mechanisms were also proposed to explain the process of colloidal preparation.     

Fabrication of monodisperse luminescent nanoparticles with core/shell poly(styrene/thiophene) structure

Luminescent poly(styrene/thiophene) (PSt/PT) core/shell nanoparticles were prepared by oxidative polymerization in the presence of PSt seed particles. PSt seed particles with uniform size distribution were prepared with an anionic surfactant by an emulsion polymerization process, and were used as a template to prepare monodispersive PT‐coated nanoparticles. A luminescent Polythiophene (PT) layer was formed on the surface of PSt nanoparticles by oxidation polymerization with iron chloride (FeCl₃) and hydrogen peroxide (H₂O₂). The mechanism of core/shell formation was found to be the interface‐dominant polymerization induced by the electrostatic attraction between the sulfonate group of anionic surfactant and Fe³⁺ ions after the diffusion of thiophene monomer to the PSt nanoparticles. Field‐emission scanning electron microscopy and transmission electron microscopy (TEM) proved the core/shell structure, which provided key evidence that PT was incorporated onto the surface of PSt nanoparticles. In addition, the effect of the PT shell thickness on photoluminescent (PL) intensity was investigated by changing the shell thickness of PSt/PT nanoparticles. We observed that the PL intensity increased up to about 30 nm of PT shell thickness, and then decreased due to self‐absorption. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5968–5975, 2008     

Influence of alkyl chains of amphiphilic hyperbranched poly(ester amine)s on the phase‐transfer performances for acid dye and the aggregation behaviors at the interface

Hyperbranched poly(ester amine) (HPEA) with terminal secondary amine groups was synthesized by the Michael addition reaction between piperazine and trimethylolpropanetriacrylate with a molar ratio of 13:6. It was further reacted with a series of aliphatic acid chlorides, including stearoyl chloride, dodecanoyl chloride, and octanoyl chloride, to yield three modified amphiphilic hyperbranched polymers, which were termed HPEA‐C18, HPEA‐C12, and HPEA‐C8, respectively. These polymers were characterized with Fourier transform infrared, ¹H NMR, gel permeation chromatography, and differential scanning calorimetry measurements. Because of the existence of interior tertiary amine groups, the modified amphiphilic polymers were used as host molecules to extract the guest acid dye, methyl orange (MO), from the aqueous layer to the organic layer on the basis of the acid–base interaction. The influences of the pH of the aqueous layer and the length of the alkyl chains in the modified polymers on the phase‐transfer performances were investigated. The results indicated that more MO molecules could be extracted at a lower pH because of the formation of more quaternary ammonium ions within the host molecules. As the length of the alkyl chains in the modified polymers increased, both the transfer capability and the intermolecular aggregation at the interface were enhanced. The extracted MO could be reversibly released from the organic layer to the aqueous layer under basic conditions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2921–2930, 2005     

A convenient synthesis of a porphyrin cross-linked polymer,its application as a size selective heterogeneous catalyst and a comparison with a porphyrin-cored hyperbranched polymer

This paper describes how the polymeric structure and environment surrounding supported catalysts can be used to affect the product outcome from a reaction. As well as reporting a size/shape selectivity, we also describe a significant effect on product distribution. Specifically, how the polymeric environment can favour or disfavour particular products. As such, these results illustrate how it may be possible to target more or less of a specific compound (from a possible mix) by careful choice of the polymer architecture surrounding a catalyst.     

Preparation and characterization of core–shell polymer particles with protonizable shells prepared by oxyanionic polymerization

A series of polystyrene (PS)/poly(vinyl acetate) (PVAc) crosslinked particles (240, 210, or 90 nm) with different concentrations of PS (75, 50, or 25 wt %) were prepared by soap‐free emulsion polymerization. Based on the crosslinked polymer particles, three series of monodisperse core–shell particles with pH‐sensitive poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA) shells were synthesized by oxyanionic polymerization. During the oxyanionic polymerization, the acetate groups of PVAc were hydrolyzed, and the hydroxyl groups that formed on the surfaces of the particles, acting as initiators, were transferred to ? O^?K⁺ by DMSO^?K⁺ (where DMSO is dimethyl sulfoxide) at the same time; then, ? O^?K⁺ initiated the polymerization of 2‐(dimethylamino)ethyl methacrylate. ¹H NMR and Fourier transform infrared studies confirmed the existence of PDMAEMA shells, and the contents of PDMAEMA were measured by elemental analysis. Because the PDMAEMA chain could be protonated at a low pH, these core–shell particles could adsorb negatively charged modified magnetite particles, and at higher pHs, the magnetite particles could be released again; this process was reversible. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6081–6088, 2004     

New series of AB2‐type hyperbranched polytriazoles derived from the same polymeric intermediate: Different endcapping spacers with adjustable bulk and convenient syntheses via click chemistry under copper(I) catalysis

In this article, according to the concept of “suitable isolation group,” six new AB₂‐type polytriazoles containing azo‐chromophore moieties, derived from the same hyperbranched polymer intermediate, were successfully prepared through click reaction under copper(I) catalysis by modifying the synthetic route, in which different isolation groups in different size were introduced to the periphery of the hyperbranched polymers as end‐capping moieties. With the different end‐capping groups, these hyperbranched polymers, P1 – P6 , exhibited different solubility and processability; also, their nonlinear optical properties were modified accordingly, realizing the adjustment of the properties of hyperbranched polymers through the structural design. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011